Related
Hi guys
Got my replacement TP2. Screen protector went on perfectly .... ahhhhh
Installed and got radio app ... and it works well - thanks
I love the device .... the display is something else.
My only concern relates to the keyboard mechanism.
When closed, the leading edge (left edge of the phone with it in front of you) has some give in it and when you tap the screen on the left side you can feel the bounce (a little knock sensation).
I don't remember this on the first one, but I didn't really get time to play with it before it went back.
I'm comparing the mechanism with the TyTNII ... and there is something in the TyTNII construction that doesn't exist on the TP2. Front to back on both sides is a slippery plastic 'runner' that is about 1.5mm high. This ensures the mech slides at an even height as it closes. The TP2 doesn't have this and is therefore 'hinged' on the right hand side ... suggesting this give ... and therefore bouncing / knocking will be inevitable.
What are you guys seeing ?
Also ... my original TP2 had plastic film down the sides of the keyboard and across the back of the keyboard .... the new one has them on both sides but not at the back ... which is a puzzle ... I assumed they were there to minimise scratching from the mechanism movement ... particularly important with the 'give' that seems inevitable by this different design.
Paul.
Sorry about the bounce, but I need to know from all those that have got a TP2 whether or not they are experiencing the same bounce on the left side as I am.
Without that I can't take a decision between keep, exchange (reluctant as the rest of the device is perfect and I don't want to end up with some other issues on a new device) or send for repair (probably the worst scenario.
Please let me know.
Paul.
Mine "bounced" a little... but i think that's because it's a sliding keyboard ... and it's not clearly noticable...
by the way, i already lost one of the film-plastic pieces you're talking about... hope it don't harms the paint
Mines fine, no bounce at all
Thanks guys
Looks like it maybe a tolerance issue .... any other responses hugely appreciated.
Paul.
No bounce on mine either and I've only just noticed those little pieces of film, one of mine looks like it will be coming loose very soon.
mine bounces.
just noticed it, and then returned to this thread where i remember you talkin about bouncing edge.
perhaps im being overly concerned though. (....but if anyone else tries exchanging theirs because its bouncing, then so am I!)
The bouncing makes interacting with the device so distracting.
It's a real pain. It concerns me that given there are no raised sliders running down the sides of the keyboard as there were on the TyTNII, even if the device isn't like this as new ... the constant stresses on the mech from opening / closing and simply tapping the screen will result in all the devices getting it sooner or later.
I'm not looking forward to trying to get an exchange or refund. Suppliers understandably never like dealing with repeating issues ... and never seem to push back the problems on the manufacturer. HTC responded very quickly saying ... sorry you are having problems ... you can send it in for repair anytime in the 24 month warranty ... but I don't want a 'repaired' brand new device.
I've already stuck my MicroSD back into the TyTNII (still as solid as it was the day I purchased it).
Any more views, I'd be hugely appreciative. Feeling rather despondent :-(
Paul.
Hi guys
Need to make a decision today ....
I'm trying to decide if all devices will end up with this issue because the raised bars on each side of the TyTNII keyboard don't exist on the TP2 ... or if the loose mech which causes the bounce only affects the 45-50% I'm seeing from the polls I've done.
This is a bit of a worry. I really want this device but having it bounce up and down every time I touch the left half of the display will drive me mad.
Sorry to ask again ... but thoughts please.
Paul.
I think i know what your talking about and on mine if i press on the very edge (not the screen on the chrome) it will flex but thats all the way around i've not noticed any issues with it "bouncing" while using it for quite a bit now.
The bounce is also on the Xperia, is cause of the keyboard.
On the TyTN II there was no bounce, cause of the mechanisem being diffrent.
Yes I also had it on several X1 units, there is always little movement in these types of designs. I would rather have the bounch than have it scrape/scuff the keyboard. I contacted HTC regarding this issue they say it is perfectly normal.
The bounce on my unit has so little movement. This little niggle is not enougth for my phone to go back. Everythhing else is perfect very happy with it
Yes ... it clearly varies a lot.
My TyTNII still has no movement at all - had it probably 2 years. I'm sure this is because of the spacer bars down the side of the keyboard.
The X1 had a little movement ... but nothing like I experience with my TP2.
You actually feel it move down and knock with every single soft touch screen press when you are over the left half of the display.
A girl in customer service at HTC is escalating this for me today. She tells me that she has had several calls from people complaining about the same issue ...
Some devices are obviously a lot looser than others.
Paul.
After praising the tp2 for nearly two weeks now I have decided I will return it to MPD.
I paid 457 for this phone and I will except nothing less than 100 percent perfection in terms of build quality.
After 2 weeks use I have to following problems:
- The sceen travel before it hits the lcd in the centre of the screen had increased rapidly and I can now notice a significant change between sensitivity at the edges and the centre (about 1-2mm).
- The sliding mechanism has got easier which is good, but the movement of the screen is about 7mm when at full tilt, where as it was minimal at best when I received it.
Im not writing this as a sob story; I have a genuine worry that these could be very common problems and yet im unsure at the chances of returniing it for a replacement - hoping it wont have the same problems
Mine went back I had it one day, They called me when they received it and then acitoned a refund. The Touch Pro 2 is a terrible built device for something that cost's half a grand.
I have gone back to the Touch HD but really miss the keyboard oh well at least my device isn't going to fall apart. My partners device was perfect and now after a month of use it is now wobblying when you touch the screen and slider is so loose.
sorry you need to mail the webshop and wait for your reply sometimes they reply quick other days they take a while to reply. It will get worse get it replaced or refunded is my advice.
had two deviced now and sent both back. i cross my fingers the third onw will be without any isues. think MANY bad manufactured devices are out there
on my 4th so far and not 100% happy, wobble in the screen when tilted. Very bad design from HTC, poor build quality.
wobble in the screen would not be such a big problem for me i never tilit the screen. hope ill get a device with no other problems next time.
i cant understand why they built this useless tilt feature into the slider the slider could be much more "robust" without this tilit mechanism.
Say it ain't so....
How common are these screen issues that you guys are mentioning, the wobble and such? These issues that you folks are bringing up are starting to worry me, and what worries me even more is that some of you went through 3 or 4 of the TP2s already, leading me to believe that these problems are more widespread than I'd like. I've been anticipating this phone's arrival since February and I really hope that these issues aren't so common that it turns the TP2 into a total let-down instead of the great device that all this hype is leading me to believe. If at all possible could you guys please post updates on your situations?
thanks, and I hope all works out well for you guys.
What do you mean by a wobble? Is the screen itself deformed or are the letters/pictures deformed on the display?
Maybe you can post a picture or something?
I hardly ever use the Tilt feature. When I first heard about it I thought it was brilliant, still looks cool, but it isn't comfortable to work with ...
the wobble issue is discussed in this thread:
http://forum.xda-developers.com/showthread.php?t=524641
some people are worried about the screen wobbles a little bit when its tilt like in this video:
http://www.youtube.com/watch?v=I6A5v-DR1A8
i think this is ok if it is not too much.
BUT i had two devices with a problem similar to this video and thats absolute not ok for me:
http://www.youtube.com/watch?v=BObBGt40hYg
the screen wobble isnt such a big problem for me, it makes it easier to slide out flat.
my problem is with the flex on the touchscreen. it feels like you push down on one plastic layer which then hits the lcd behind, making it less sensitive in the centre than the edges where i dont have this problem.
i think there is nothing to do. this is the "touch" in touch screen. it has to be little bit flexible to react to your input. dont compare it to the iphone thats a nother technique.
or do you mean something else?
Hi lhwparis
real glad you posted those videos of the wobble. I was beginning to think it was something quite serious, but i see that kind of bounce in most tiltable systems. So not so worried now.
Has anyone done a poll yet of how many people have a phone that does this? strange that its not the same with everyones.
what do you mean with "bounce"? video 1 or the beginning of video 2.
i think the wobble when screen is tilt is normal on most phones (only some without wobble) and thats not a great problem. the second video with the gap between the display and the phone in closed position is a realy great problem for me.
yes i did watch both, i guess im refrerring to the wobble, whilst its open.
perhaps the bounce whilst its closed is not so normal, although again im not sure how much of gap would be a source of concern.
I've got to be honest here. I am one of the fussiest people in the world when it comes to gadgets, but I think there is a lot of over-reaction about the "wobble" issue. The mechanism which allows the screen to tilt will have some "play" in it - otherwise you'd never be able to slide the keyboard out. The same "play" is what means that there is a gap between keyboard and screen - and this will be larger on the side nearest the power button, and it will give a little when you push on this side of the device, as the two halves are held together by the hinge at the opposite edge. It's unavoidable - even if your device doesn't do this from new, I can pretty much guarantee that it will do so within a few weeks. If the hinge is actually loose - so the screen doesn't stay put where you leave it, or if the slider mechanism works without you wanting it to, then you have a problem - but small gaps and small amounts of play in the mechanism are not only normal; they are what prevents damage from operating the mechanism.
"Give" near the centre of a large touchscreen is also pretty common - it's difficult to get the touchscreen to lay perfectly flat, as it is only secured at the edges. Again, there will be a degree of variation between samples, but this is another thing that will change with time. It also quite often varies with air pressure - if you take any touchscreen device (other than the iPhone, which uses a different principle) up in an aircraft, the touchscreen will frequently bulge out more from the screen due to the reduced ambient pressure and the small amount of air trapped under the touchscreen.
I really think that some of you are getting a little too over-stressed about this - 99% of these devices are fine. Leaving aside anything else, these will all have been tested in the factory, and mechanical function of the screen hinges and touchscreen will have been tested on every device before it was packed.
still, its disturbing to hear how many people are getting differences in their build quality. perhaps this is why tmobile uk are not going to be launching the device?
lhwparis said:
i think there is nothing to do. this is the "touch" in touch screen. it has to be little bit flexible to react to your input. dont compare it to the iphone thats a nother technique.
or do you mean something else?
Click to expand...
Click to collapse
The flexibility in the hinge is nothing to do with the resistiveness of the screen. Regardless of the screen, there should not be this amount of flex in the hinge.
what a load a rubbish.............if any of you fusspots owned a tytn 2 you probably would have nightmares. too much fussing over a wobble which is manditory to avoid sudden harsh impacts and decrease tension on the ribbon that goes from the board to the screen. the screen when tiltled was not actually done so we can sit there wobbling it. in fact no one actually needs to wobble the phone. the phone is sturdy when in full tilt then it works. imagine people actually sitting there wobbling the thing. what do you think will happen? it will loosen...........the wobble is not a feature of the phone but for safety and longevity of the moving parts of the phone. if you don't like the phone then don't buy it. if the screen had no wobble i'd be reading whole new thread of how it should. obviously this phone willl not please everyone and so those moaning about wobble should not buy the phone! obviously there will be some faulty handsets but needing 4 handsets should tell you that maybe it ain't the phone but actually you with the issue. it amazes me how people always find one thing negative to focus on but forget all and i mean all the positive aspects of this phone. what wobble?????????? touch HD which i do own has nothing on tp2 so thats a backward step! this is a phone not a tennis racket
no you are right, but the gap has got bigger in the middle since when i first got it, and comparing it to my friends HD the gap is far greater. There is barely any travel when it comes to the edges, and I see no difference of why this couldnt be the same for the centre.
shure2 said:
what a load a rubbish.............if any of you fusspots owned a tytn 2 you probably would have nightmares. too much fussing over a wobble which is manditory to avoid sudden harsh impacts and decrease tension on the ribbon that goes from the board to the screen. the screen when tiltled was not actually done so we can sit there wobbling it. in fact no one actually needs to wobble the phone. the phone is sturdy when in full tilt then it works. imagine people actually sitting there wobbling the thing. what do you think will happen? it will loosen...........the wobble is not a feature of the phone but for safety and longevity of the moving parts of the phone. if you don't like the phone then don't buy it. if the screen had no wobble i'd be reading whole new thread of how it should. obviously this phone willl not please everyone and so those moaning about wobble should not buy the phone! obviously there will be some faulty handsets but needing 4 handsets should tell you that maybe it ain't the phone but actually you with the issue. it amazes me how people always find one thing negative to focus on but forget all and i mean all the positive aspects of this phone. what wobble?????????? touch HD which i do own has nothing on tp2 so thats a backward step! this is a phone not a tennis racket.
Click to expand...
Click to collapse
i said that wobble is normal in all posts before but i sent back my two devices because of the issue shown in this video (at the beginning):
http://www.youtube.com/watch?v=BObBGt40hYg
so you want to tell me its normal that i can lift of the screen more than 5mm in closed position?
my friend has a TP2 too and he cant lift of the screen from device and there is nearly no gap!
shure2 said:
After praising the tp2 for nearly two weeks now I have decided I will return it to MPD.
I paid 457 for this phone and I will except nothing less than 100 percent perfection in terms of build quality.
After 2 weeks use I have to following problems:
- The sceen travel before it hits the lcd in the centre of the screen had increased rapidly and I can now notice a significant change between sensitivity at the edges and the centre (about 1-2mm).
- The sliding mechanism has got easier which is good, but the movement of the screen is about 7mm when at full tilt, where as it was minimal at best when I received it.
Im not writing this as a sob story; I have a genuine worry that these could be very common problems and yet im unsure at the chances of returniing it for a replacement - hoping it wont have the same problems
Click to expand...
Click to collapse
Good luck..
The screen went really weird on mine, colours all messed up so on. Emailed mpd, which of course they didn't answer in a timely fashion so I phoned them to which they refused to help me over the phone and told me to email.
Half a day later I get a reply refusing to take it back as I've had it for over seven days and to send it to Regeneris or whoever they're called so I did that. The idiots at MPD failed to realise Regeneris wont' repair these phones, and then forward it on to HTC .. which of course it bizarrely taken them three days to do so.
Apparently now HTC have had it a week, and I've been bugged Regeneris every day, and the answer is the same .. "We've not heard anything, but I'll email them again" Either they've not emailed them as promised or HTCs customer service is evern worse than MPDs.
I've now been without my TP2 for over two weeks, with no sign of getting back and needless to say I'm pissed off!
Hi all,
I simply love this phone, but I'm facing a situation that my screen is too sensitive. The home screens were so sensitive a few programs were started without my knowledge. It got better after I switched to Launcher Pro.
However, it is still too sensitive in other areas. When I'm scrolling down, say, the apps in Market, I'll always end up selecting a few items accidentally before I reach the end of the list.
I've used HTC Desire in the past and I'm quite sure the problem is not due to me.
Does anyone else face the same problem, or I have a hardware problem? Or software problem? Can I be tweaked by any means?
Any feedback would be useful! Thanks!!!
KG
I faced this problem before... while swiping, apps accidentally open. But instead of "too sensitive" i thought it's insensitive... because a short swipe was sometimes interpreted as a tap (maybe because the swipe was not fully detected?).
Anyway, I had 2 layers on my device... the pre-applied sheet and another screen protector that came with the box.
I removed the second layer, leaving only the pre-applied sheet, and all is well again... no more accidental "taps"
vincent.hsy said:
I faced this problem before... while swiping, apps accidentally open. But instead of "too sensitive" i thought it's insensitive... because a short swipe was sometimes interpreted as a tap (maybe because the swipe was not fully detected?).
Anyway, I had 2 layers on my device... the pre-applied sheet and another screen protector that came with the box.
I removed the second layer, leaving only the pre-applied sheet, and all is well again... no more accidental "taps"
Click to expand...
Click to collapse
Dude, you mean the cause was the screen protector that came with the phone???
kargtan said:
Dude, you mean the cause was the screen protector that came with the phone???
Click to expand...
Click to collapse
For my case, maybe 2 layers is just too thick
I'm having the same problem. And that solution seems to make sense. I would give it a try, but if the problem still occurs, I'd be wasting one screen protector..
zha1 said:
I'm having the same problem. And that solution seems to make sense. I would give it a try, but if the problem still occurs, I'd be wasting one screen protector..
Click to expand...
Click to collapse
That was how I solved my problem. I actually put on the spare screen protector because when I got the set I didn't realize there was already a pre-applied layer.
Don't blame me if it doesn't work for you
perhaps some of you guys just have the shakes?! ;-p
I guess the screen is never to perfect for everyone.
kargtan, I've noticed the same about the tap sensitivity - I often accidentally "tap" when I mean to swipe. Came from an iPhone 3g and didn't notice this on that device. Might be a matter of getting used to it, not sure. Have you gotten any feedback from others in other forums?
I've noticed this too, and put it down to the screen protector. It's not android OS causing it, never had the problem on my htc hero...
However, now that i've gotten used to the phone it doesnt do it any more - guess my brain has automatically trained itself to drag the screen a little bit more firmly or something.
One thing i have noticed about the arc is: because the bezel around the screen is so thin, i often accidentally launch apps just by holding it. My fingers wrap around slightly & touch the edges of the screen.
Does any of you have problems while trying to swap a screen from another and instead of swapping you get like a "bounce" and stay on the same screen? because that happens to me all the time, I came from an htc Legend and this is making me crazy !
btw, this happens to me if I hold the phone with my right hand and try to do the swapping with my thumb, the only way to get it right is to hold the phone with my left hand and use the index of my right hand
Screen too/not sensitive
Hi guys,
I think the problem arises from the slowness of the phone, not "too sensitive". I used to use the HTC Desire in the past and I was very used to the screen scrolling very quickly. In contrast, the arc is slower and hence the screens don't scroll as fast and hence my way of handling the Desire would cause the problems stated.
I did a few things since my last posting and it seems better now:
Replace the SE Home with Launcher Pro - this seems to have improved on the speed of the phone, and hence better responsiveness to the touch.
Rooted the phone and uninstalled some stock programs.
Removed useless widgets on the desktops.
Adjusted my way of scrolling as someone has suggested.
This is quite frustrating at times, especially so because other than this problem, this phone is a gem, especially its form factor, the sound quality and most importantly, the quality of the camera.
I might sell the phone once the company issues me with a Blackberry (DANG!), but I am kinda unwilling because I have been taking lots of photos with my Android phones and these photos are generally well-liked by my Facebook friends.
agree with bezel thing and hard to use thumb.
noticed arc screen (the screen guard perhaps ) easily get oily and slippery.
had to wipe phone and wash hand so often that make me like some sort of disorder.
Don't know why you guys seem to be having problems... I don't have any issues with my screen swipes at all... smooth and fast.. both on stock and Launcher Pro..
Same deal here. But that's because the screen is sensitive beyond the display area including the black border, and the edge is too narrow. When I use one hand swiping or tapping, the palm of my hand touches the black border. The screen registers two touches in quick succession and thus jumps.
In Phone keypad, enter *#*#7378423#*#* (the numbers mean SERVICE word in keypad), you can go into test mode. Select [Service test]->[Touch Screen] to test the badly touch screen of SE Phones.
You will discover when you swipe the edge of touch screen, the touched result is very not satisfied. The lines you swiped will not accurate and appear like jags, or stick on the edge of the screen.
The touch panel made in China...? ;-)
Me too!
Hey!
i also have a xperia tipo....and i too have the sensitive problem
Could also be a kernel problem?
I remember I installed a kernel a while back that would make my screen hypersensitive; just hovering over the screen would already activate it!
I don't remember which one, it was back in the GB days. But I'm pretty sure it can be changed in the kernel.
Hi guys, I don't quite now how to explain this, but I'll give it my best. I've had my g3 for almost two weeks now and I've started to notice very faint vertical lines on the screen when on a white background, I can see them right now while writing this. It also happens in the settings screen. I'm not certain if there's something wrong or if it's always been this way and I hadn't noticed. Has anyone else noticed this? I wouldn't even say the line have a colour, it's just an alternate of darkish and white lines. I could just be looking too close, but I'm not certain.
Also I have noticed a slight black blur when using knock code, like when you would touch an old lap top screen, although a lot fainter. It only happens in one little section of the screen, but I noticed it when using the white stock wallpaper. It only seems to happen when I tap for knock code and I have noticed it when I apply slight pressure to that area. I have been delicate with the touch screen since, but I don't believe I used much pressure in the first place.
Hope I explained it well enough. Anybody else noticed anything similar? Am I being paranoid and these things normal?
There is large discussion on the "lines." I see them too, but think it is a result of the resolution itself. Nobody can say/prove what it is AFAIK.
If I press real hard on the screen in certain spots, it seems like I can replicate the second thing you're talking about. If yours does it when just lightly tapping, I'd exchange it.
Sent from my LG G3
Nitemare3219 said:
There is large discussion on the "lines." I see them too, but think it is a result of the resolution itself. Nobody can say/prove what it is AFAIK.
If I press real hard on the screen in certain spots, it seems like I can replicate the second thing you're talking about. If yours does it when just lightly tapping, I'd exchange it.
Sent from my LG G3
Click to expand...
Click to collapse
Hi,
Thanks for replying. I'm glad that the 'lines' aren't just in my imagination. Can you point me in the direction of the discussion on the lines?
I bought the phone online, but took into the store today to compare it to their demo model. It definitely doesn't have the same issue when I tap it. The salesperson wasn't sure what it was but she's going to send it in for repair/replacement. It sucks... now I'm going to have to wait till I get it back. The shop said they would have replaced it on the spot if I hadn't bought it online but from the store too.
Hopefully they get it back to me quick.
I hope no one else has this problem.
I think it's not the resolution itself, it's more about the software or kernel or something, LG implemented an oversharping thing which makes texts appear too sharp, but it's not only about texts, it's about the overall display! Notice when you scroll through LG Health page, you can see the lines moving, or changing in visibility, etc..
I have the same issue on my phone. There are very faint vertical lines most apparent on white and green colors and they seem to be rainbow colored. I have seen this issue with the at&t, t-mobile, and sprint versions of the G3 which my friends have.
It's not caused by the over sharpening effect because even after I flashed a fix for it, it still appears.
Almost as if it's like one of those 3d card/poster effects.
Hi guys,
is there any news on any fix on this?
I have the same problem. Should I RMA my phone?
Anyone else having issues where touching the edge of the screen but the phone not registering it?
Like in chrome or gmail or any other app that has the menu button at the top right of the app. I hit the 3 dots but nothing happens. I've even tapped multiple times in a row with nothing registered.
Seems I have to go further into the screen where the curved part stops and the screen goes back flat before the touches are registered normally.
I'm curious if this is normal or not, I'm seriously considering returning the phone for this so I want to know if it's just me or not.
Getting the same thing on mine. Only really noticed it on the keyboard trying to get characters on the very right edge. Already got used to it though and just changed how it tap those characters. Should really be fixed by Google though - even if it's just a software sensitivity thing. You're the first other person I've heard of that has seen this though, so....not at all sure how common it is.
I've noticed it to a few times, particularly in the top right corner.
Sent from my Pixel 2 XL using Tapatalk
Yep. Happens on the right side constantly.
Yes, a game that I play doesn't scale properly for the different ratio, and not only am I missing stuff hanging over the edges, but I also can't tap on stuff right at the edge. I am definitely remembering why I don't usually get day one phones (or 2nd generation phones, it seems like the 1st gen is always cool but lacking, 2nd has all the features but none of them work, and 3rd they finally fix all the problems... 4th and later are then usually boring).
Anaelith said:
Yes, a game that I play doesn't scale properly for the different ratio, and not only am I missing stuff hanging over the edges, but I also can't tap on stuff right at the edge. I am definitely remembering why I don't usually get day one phones (or 2nd generation phones, it seems like the 1st gen is always cool but lacking, 2nd has all the features but none of them work, and 3rd they finally fix all the problems... 4th and later are then usually boring).
Click to expand...
Click to collapse
Unless it's the Moto X you're talking about.
Gen 1 was the best. 2 had some new features but the look got butchered. 3 was a complete mess thanks to Lenovo. 4 after a 2 year hiatus isn't even an X. Just a Lenovo phone wannabe using their purchased Moto brand name and X line. lol
RIP Moto
Yup, I am having the same issues.
I have noticed the same problems as well.
And in Play Music when I try to touch the 3 dots on the album art to select download it jumps down thru the library?
I have also noticed that when using navigator for walking and carrying it in my pocket when I pull it out to check the screen it sometimes takes a while for the screen to come on?
No issues here.
Are you using a screen protector or anything?
dsmitty166 said:
No issues here.
Are you using a screen protector or anything?
Click to expand...
Click to collapse
No screen protector here. Touch response is terrible on my phone. Takes 2-3 taps for the screen to respond on certain things.
dsmitty166 said:
No issues here.
Are you using a screen protector or anything?
Click to expand...
Click to collapse
No screen protector. I am using a case, but I took it off and tested and get the same problem without the case too.
Noticed the same thing here on both the left and right side particularly when using the keyboard.
I've noticed something else though, I can run my fingers along the edge and it will scroll. But tapping in the same spot doesn't register so I am thinking it is software filtering out the touches.
shark1987 said:
I've noticed something else though, I can run my fingers along the edge and it will scroll. But tapping in the same spot doesn't register so I am thinking it is software filtering out the touches.
Click to expand...
Click to collapse
I noticed the same thing. tapping on the far right edge doesn't register anything, but pressing and scrolling up/down, there will be a small delay and then it'll start scrolling. Pretty annoying, but should be fixable.
Same problem here... Notice it mostly on lower right. Keyboard and thumbs up in the messenger.
Same with me. I had extreme difficulty registering a key-press when typing a '0' on my keyboard earlier today. As on a normal keyboard, the '0' is on the right edge.
I cannot however seem to recreate the issue now.
Has anyone tried contacting Google support regarding this?
Thought I was imagining it, but it keeps happening to me as well.
dude_savage_89 said:
Same with me. I had extreme difficulty registering a key-press when typing a '0' on my keyboard earlier today. As on a normal keyboard, the '0' is on the right edge.
I cannot however seem to recreate the issue now.
Has anyone tried contacting Google support regarding this?
Click to expand...
Click to collapse
I contacted Google support about the issue and they offered to replace my device with a new device.
Sent from my Pixel 2 XL using Tapatalk
Just found this app https://play.google.com/store/apps/details?id=com.mycompany.anton_mokshyn.touchscreentest which lets you test the touch screen detection. With it I'm finding that the edges of the screen often require two touches to get them to register. I'd be interested to hear what others are seeing.
I feel like I'm the only one who got a non defective pickle. I've literally experienced none of the issues going around in these forums. Thank you lawd