I have a T-mobile M8 with super CID. I wanted to put it back to the original. Does anyone know what the original CID is?
vampyric_blood said:
I have a T-mobile M8 with super CID. I wanted to put it back to the original. Does anyone know what the original CID is?
Click to expand...
Click to collapse
Should post this in Q&A thread.
Also maybe do a simple search, its all over the place.
But here ya go
T-MOB010
vampyric_blood said:
I have a T-mobile M8 with super CID. I wanted to put it back to the original. Does anyone know what the original CID is?
Click to expand...
Click to collapse
if you're trying to go back to stock then the cid for tmobile is: T-MOB010
search on google for the commands to change your cid
To get back to stock follow these instructions:
http://forum.xda-developers.com/tmobile-htc-one-m8/general/htc-m8-t-mobile-recovery-to-stock-t3493877
Related
I have a HTC one m8. Right now it has s-off with cid 11111111 My carrier is wind mobile the original cid is GLOBA001.
I can't find a RUU that matches my original CID. I want to go back to stock htc sense. When I got the phone it was rooted and modded. I've tried installing an At&t RUU but every time I open the RUU it goes to the installshield, I click next and then it closes. I have the htc usb drivers and I ran it as administrator.
Can someone tell me how to return this phone back to a stock rom? If someone could please help me get this back to normal I would really appreciate it.
Navetz said:
I have a HTC one m8. Right now it has s-off with cid 11111111 My carrier is wind mobile the original cid is GLOBA001.
I can't find a RUU that matches my original CID. I want to go back to stock htc sense. When I got the phone it was rooted and modded. I've tried installing an At&t RUU but every time I open the RUU it goes to the installshield, I click next and then it closes. I have the htc usb drivers and I ran it as administrator.
Can someone tell me how to return this phone back to a stock rom? If someone could please help me get this back to normal I would really appreciate it.
Click to expand...
Click to collapse
If you want to go to stock it has nothing to do with supercid.Since you have an supercid device your phones mid should match with the mid of the ruu which you are flashing.The best way is that change your mid to WWE version and flash WWE stock rom and its ruu.This will take you to the stock rom and also you will regain your warranty.This will make your phone that it came from the factory itself.You can follow this guide http://forum.xda-developers.com/showthread.php?t=2735235
Jyotirdeb said:
If you want to go to stock it has nothing to do with supercid.Since you have an supercid device your phones mid should match with the mid of the ruu which you are flashing.The best way is that change your mid to WWE version and flash WWE stock rom and its ruu.This will take you to the stock rom and also you will regain your warranty.This will make your phone that it came from the factory itself.You can follow this guide http://forum.xda-developers.com/showthread.php?t=2735235
Click to expand...
Click to collapse
This guide is great but I would like to go back to stock rom with S-ON so I can send my device in for warranty. To do this I think I need the RUU for the wind mobile cid: GLOBA001
Am I wrong in this assumption?
Navetz said:
This guide is great but I would like to go back to stock rom with S-ON
Click to expand...
Click to collapse
Do NOT go s-on after achieving S-OFF. You have the possibility of a lot of bad things happening, including having phone that won't boot with a security warning. There is a thread on it somewhere. Scotty1223 wrote it. Leave it S-OFF. If you have a backup up of stock. I would restore that, in the development section there will be a guide to get rid the tampered flag. Then flash stock recovery. After than you "should" don't quote me on that. Should have an unlocked bootloader stock recovery and S-OFF. Then, change your "unlocked" banner to "locked" not relocked. "Locked" there is another thread somewhere, written by Scotty1223. I'm on mobile so it's kinda hard to find these threads and post it. If you can't find them, next time I'm on my computer, I can post the websites.
Sent from my HTC One M8 Google Play Edition. S-OFF.
Navetz said:
This guide is great but I would like to go back to stock rom with S-ON so I can send my device in for warranty. To do this I think I need the RUU for the wind mobile cid: GLOBA001
Am I wrong in this assumption?
Click to expand...
Click to collapse
You wont get warranty with s-on at any cost.for that you have to be s-off.try sunshine method it worths 25$.But before that try firewater exploit since it is free
Wind Stock Recovery Still Needed!
Jyotirdeb said:
You wont get warranty with s-on at any cost.for that you have to be s-off.try sunshine method it worths 25$.But before that try firewater exploit since it is free
Click to expand...
Click to collapse
This thread kind of wandered a bit... so does anybody have, or can somebody please make, a stock recovery for wind mobile? Because there isn't one - anywhere - on the internet. I've searched everywhere, spent weeks doing it. so for the love of all things that smell nice can someobody reading this please hook me up?
Hello guys,
I have my M8 bought from US, Verizon and I am living in Netherlands. The problems is that I cannot get the updates from Verizon because as you know is CDMA so I have been trying to find a way to convert my M8 Verzion into an international M8.
First step: I flashed @Mike1986's One_M8_2.22.401.4_odexed and everything workes on my phone, even wifi and I also receive notification about software updates, the only problem is that when I try to install that updates ( see the error in the attached image).
My question is : what do i need to modifiy to make the phone 100% international version ?
I have to mention that I have S-off already
Is your network carrier a cdma or gsm network? If it's gsm network, it will not work.
It's gsm.
Yes I read that it won't work if you are on a gsm network it will not work but technically Verizon M8 has the same hardware as the international version so logically it should be possible to convert it, I just don't know what do i need to do.
"logical" or not, the internal electronics are different in the radio section, so you will not be able to get it to work as you would like..
S0wL said:
It's gsm.
Yes I read that it won't work if you are on a gsm network it will not work but technically Verizon M8 has the same hardware as the international version so logically it should be possible to convert it, I just don't know what do i need to do.
Click to expand...
Click to collapse
I don't know much about Verizon and I maybe wrong but if it is a GSM and S-Off (as you mentioned that you flash mike's ROM and it works flawlessly and you received OTA) then what you need is the right combination of CID and MID.
For e.g an Intl GSM EU_WWE, the MID is 0P6B10000 and for CID you can make it SuperCID.
Check your current MID - command fastboot getvar mid
ckpv5 said:
I don't know much about Verizon and I maybe wrong but if it is a GSM and S-Off (as you mentioned that you flash mike's ROM and it works flawlessly and you received OTA) then what you need is the right combination of CID and MID.
For e.g an Intl GSM EU_WWE, the MID is 0P6B10000 and for CID you can make it SuperCID.
Check your current MID - command fastboot getvar mid
Click to expand...
Click to collapse
My MID is 0P6B20000
S0wL said:
My MID is 0P6B20000
Click to expand...
Click to collapse
Yeah, International version is 0P6B10000
S0wL said:
My MID is 0P6B20000
Click to expand...
Click to collapse
That's explained the error that you posted in your screenshot because the OTA expect that you have MID 0P6B10000
You can change MID as in this guide : http://forum.xda-developers.com/showthread.php?t=2708581
The only question is whether the conversion will really work or not. I have no idea about verizon so not so sure. I only assume it will work based on your own comment that said Mike's ROM works flawlessly on your device. If this is true, then it should work.
Damn...it's really late over here ... gotta go now... maybe someone else have better idea for you ... good luck
S0wL said:
My MID is 0P6B20000
Click to expand...
Click to collapse
You'll need to change your MID if you're trying for International WWE.
enter the following:
adb shell
su (if needed to get a # prompt)
Code:
Code:
[B]echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384[/B]
(the above is one big long command. make sure you copy it all,and dont get extra spaces when you paste it.)
exit
adb reboot bootloader
fastboot getvar mid (or getvar all)
verify 0P6B10000 for modelid
fastboot reboot
Credit for code goes to @scotty1223 [how to] change your MID without an eng bootloader
---------- Post added at 08:29 PM ---------- Previous post was at 08:29 PM ----------
ckpv5 said:
That's explained the error that you posted in your screenshot because the OTA expect that you have MID 0P6B10000
You can change MID as in this guide : http://forum.xda-developers.com/showthread.php?t=2708581
The only question is whether the conversion will really work or not. I have no idea about verizon so not so sure. I only assume it will work based on your own comment that said Mike's ROM works flawlessly on your device. If this is true, then it should work.
Damn...it's really late over here ... gotta go now... maybe someone else have better idea for you ... good luck
Click to expand...
Click to collapse
You keep jumping ahead of me by mere minutes
:good:
ckpv5 said:
That's explained the error that you posted in your screenshot because the OTA expect that you have MID 0P6B10000
You can change MID as in this guide : http://forum.xda-developers.com/showthread.php?t=2708581
The only question is whether the conversion will really work or not. I have no idea about verizon so not so sure. I only assume it will work based on your own comment that said Mike's ROM works flawlessly on your device. If this is true, then it should work.
Damn...it's really late over here ... gotta go now... maybe someone else have better idea for you ... good luck
Click to expand...
Click to collapse
Thanks, I changed MID, I will try now the software update to see what happens, I will be back with a reply
I'm trying to get back to stock so I can flash the HTC OTA. When I try and get my main version it's blank, there's nothing there. I'm S-Off.
EchoX860 said:
I'm trying to get back to stock so I can flash the HTC OTA. When I try and get my main version it's blank, there's nothing there. I'm S-Off.
Click to expand...
Click to collapse
That's most likely due to the bug that was in earlier versions of TWRP. What device do you have i.e Verizon, T-Mobile, International WWE. More specifically perhaps, what's your CID?
BerndM14 said:
That's most likely due to the bug that was in earlier versions of TWRP. What device do you have i.e Verizon, T-Mobile, International WWE. More specifically perhaps, what's your CID?
Click to expand...
Click to collapse
My recovery is PhilZ, I also had the same issue with TWRP. My CID is 11111111
EchoX860 said:
My recovery is PhilZ, I also had the same issue with TWRP. My CID is 11111111
Click to expand...
Click to collapse
Yeah being SuperCID isn't going to help much with going back to stock. Don't you know what CID you had before you changed to SuperCID? Or what device you had? AT&T branded phone, T-Mobile, International WWE, if it's some of the big "names" then perhaps we can still refer to some backups etc, if its something like TIM Italy then
Unless you want to convert to International WWE seeing as you're S-OFF?
BerndM14 said:
Yeah being SuperCID isn't going to help much with going back to stock. Don't you know what CID you had before you changed to SuperCID? Or what device you had? AT&T branded phone, T-Mobile, International WWE, if it's some of the big "names" then perhaps we can still refer to some backups etc, if its something like TIM Italy then
Unless you want to convert to International WWE seeing as you're S-OFF?
Click to expand...
Click to collapse
VZW_001 was my CID.
EchoX860 said:
VZW_001 was my CID.
Click to expand...
Click to collapse
That clears things up a bit :good:
http://forum.xda-developers.com/showpost.php?p=55639805&postcount=2060
There I have some links to Verizon stuff. Including a link to the stock recovery and backups.
[GUIDE] RETURN TO STOCK(Mostly)
Also for Verizon. I'm pretty sure there's an RUU for Verizon as well, you could always run that and return to stock on your device.
Well i have one htc one m8 from usa. Im in europe now. I need to change it to completely stock version. I dont really know whatbthat guy from whom i took the phone did on it, but im completely lost.
Its rooted with custom recovery and custom rom. I try many guides woth adb and staff and i fail.
If there is enybody who can guide me step by step will solve my problem.
Please help me.
First of all, there is a forum section for help and questions.
Secondly, what's the problem? You need to describe the problem (and provide specific details), if you want help.
Post more info, and I'll try to help; and also ask the mods to move this thread to the Q&A Help section.
Sorry about the thread on here and i beg mods to move it.
My problem is that i want to turn this mobile comepletely to stock version and ota updates.
p00tin said:
Well i have one htc one m8 from usa.
Click to expand...
Click to collapse
What version? If it Sprint or Verizon, you can't convert it.
If its T-Mobile US or AT&T, you can.
Or some smaller US carrier version?
p00tin said:
I try many guides woth adb and staff and i fail.
Click to expand...
Click to collapse
This statement doesn't tell us anything, and is close to useless.
What specific steps did you follow? What steps fail, or what is the specific result/issue?
You need to sort this out, since without adb/fastboot, you really can't do the conversion you want.
p00tin said:
If there is enybody who can guide me step by step will solve my problem.
Click to expand...
Click to collapse
I don't really do "step by step" but I'll help. I leave it up to the individual to do the proper learning, so they can actually understand and gain some knowledge instead of just being spoon fed (and much of the info is already well explained in guides).
In general, you need to:
1) Get adb/fastboot working (you need to provide the proper info before I can help)
2) s-off with sunshine app ($25 US license): http://theroot.ninja/
3) Change CID and MID to the version desired: http://forum.xda-developers.com/htc-one-m8/general/change-wwe-m8-to-dev-edition-ota-t2826567
4) Run the desired RUU.
But as already mentioned, this depends on what version you have. Don't even try this with Sprint or Verizon. It won't work, and will probably brick the phone.
Its unbranded version not in belongs to any carrier as i search about it. The cid is WWE.
p00tin said:
Its unbranded version not in belongs to any carrier as i search about it. The cid is WWE.
Click to expand...
Click to collapse
I'm skeptical of both those statements.
Unbranded US versions do exist, but are fairly uncommon. Its more likely a branded version, that has had its branding removed.
"WWE" is not a valid CID. Where are you getting this from?
You need to get fastboot working, so you can give us getvar data, so we can get the proper info on what version this is.
I have flashboot working. How can i see the proper cid?
p00tin said:
I have flashboot working. How can i see the proper cid?
Click to expand...
Click to collapse
You aren't reading very carefully, are you? "flashboot" isn't a thing. Please use the correct terminology.
Use the command: fastboot getvar all
The command won't work if you type "flashboot" :crying:
Post the output, but be sure to delete your IMEI and serial number before posting, as these are private info.
I try all you recomend. Still nothing working. My cid is like i said wwe. Htc_001
Version 0.5
Version-bootloader 3.19.0.0000
Version l-baseband 1.24.21331147A1.09G
Version-cpld none
Version-microp none
Version misc PVT SHIP S-ON
Product m8_ul
Platform htcbmsm8974
Modelid 0P6B10000
Cidnum HTC__001
I try to change cid and mid but when i do command adb shell i get error that my device not found
p00tin said:
I try all you recomend.
Click to expand...
Click to collapse
No you didn't (at least not successfully). The phone is still s-on. You skipped (or tried and failed) the step of getting s-off.
This step is not optional. s-off is required to change CID and MID.
But read more below, as I'm not sure you need s-off, or to change the CID/MID.
p00tin said:
My cid is like i said wwe. Htc_001
Click to expand...
Click to collapse
First of all, you only said the CID was "WWE" which is just a description, and not an actual CID. You should have supplied the specific CID. WWE version has at least 15 different CIDs. When you ask for help, you need provide the info requested, and to be specific as possible.
Further, the CID as you typed it (Htc_001) is not correct. It needs to be in CAPS, 8 characters long, with 2 underscores: HTC__001
Most importantly, if the CID is in fact HTC__001, its already an unbranded Euro version, not US as you originally claimed. And if that is the case, you don't need to s-off or change the CID, MID.
Something doesn't seem right here. I need more information before we should proceed any further. You really need to do fastboot getvar all, and post the output (which I previously requested, but you chose to ignore). Be sure to delete IMEI and serial number before posting the getvar output.
I really need this data, before I can give you any further instructions.
Hey guys,
Several months ago I made my TMobile HTC 10 to an unlocked HTC 10. All was well until I sent my phone to Europe for my cousin. Whenever they insert a sim card, they get a message saying to enter carrier unlock pin. I was hoping when I installed the unlocked OS that I/others would be able to use the phone with any carrier. So now I'm here trying to figure out 1) how to find the code since tmobile says they can't get to it since they do everything through the app ( device unlock) now, which we are unable to reinstall since it says wrong carrier or 2) how to go back to the tmobile bloated os as i dont remember the steps and dont remember the CIM or DIM of the original ( i only remember changing the CIM). Thank you to all that help!
Since you're s-off why don't you just flash a tmo ruu, like the latest one on HTC's website and then go through whatever procedure tmo wants you to.
http://www.htc.com/us/support/rom-downloads.html
From the stock backup thread, the cid/mid for tmo are
CID: T-MOB010 | MID: 2PS650000
You only need to change the cid, as the tmo and unlocked have the same mid.
Then run the ruu from above.
I also remember seeing some threads about sim unlocking for tmo, try searching for those.
Tarima said:
Since you're s-off why don't you just flash a tmo ruu, like the latest one on HTC's website and then go through whatever procedure tmo wants you to.
(the url I am not allowed to post at the current time since newbie status)
From the stock backup thread, the cid/mid for tmo are
CID: T-MOB010 | MID: 2PS650000
You only need to change the cid, as the tmo and unlocked have the same mid.
Then run the ruu from above.
I also remember seeing some threads about sim unlocking for tmo, try searching for those.
Click to expand...
Click to collapse
So I can just flash it without changing CID?
RexAppeal said:
So I can just flash it without changing CID?
Click to expand...
Click to collapse
....?
I specifically mentioned that you need to change cid.
Tarima said:
....?
I specifically mentioned that you need to change cid.
Click to expand...
Click to collapse
Sorry, I misunderstood. Thank you!