I have a hard bricked xolo q1000 with me. Installed some drivers (hopefully these are the correct drivers)
Phone is detected in SP and on PC as MTK USB COM.. (COM32) so atleast that part is good
I also downloaded the stock ROMs
I DONT HAVE MTKDROID backup.
i am getting a 5069 No Space error \ -_- / so i am unable to flash either of the stock roms (from needrom)
->> can someone please upload PMT file and SCATTER FILE here.. i even tried creating my own scatter file but everything leads to the SAME ERROR.. 5069.. Tried ALL VERSIONS OF SP F T (Attached Screenshot)
i am 90% sure that the emmc is not physically damaged..
If someone could give me the link to the PROPER PRELOADER too.. that would be nice
->> i also have ADB, havent tried using that here..
->> Also need some instructions for flashing and removing 5069 error so phone can boot up..
Hello TC... before your Phone Is HArd Brick Which Rom You Are Using???
Same problem in my xolo q1000 mobile
I have rooted my xolo q1000 phone by kingsoroot software from my PC. After that I have uploaded the image file from the falshify app from the play store. On rebooting it got hard-bricked. I tried to go to recovery mode by pressing volume up key and power button but not able to go to recovery mode.
as it has changed my setting. by pressing camera + power button I am able to get into the recovery mode. i can choose the items by camera button, but not able to do the OK on any of the option.
Please help.
Its not even getting detected by device manager in the PC as it keep refreshing it several times at a gap 1 second.
Thanks in advance.
Hi
I have asus me371mg
when turn on device USB logo with load come and tablet brick !!!
i cant access recovery mode and dont work ( V-UP + POWER )
please help !!
how can i flash tablet
thx
no body help me ?
Same problem. any solution to fix this?
Some tool cause i try Power Button + Volume UP (appear USB logo)
Then Volume DOWN 1 times and Volume UP long press (still on USB logo)
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
EDIT:
The device has been fixed, i had to press the download button on the QFIL as soon as my phone boots into EDL mode.
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Just buy DFC cable a.k.a Deep Flash Cable. The cable is same as you wire cable manualy
Kalp3sh S1NGH said:
i am sorry but i have searched a lot but i couldn't unbrick my ZUK Z2, i flashed the Deodexed stock ROM and then the screen went all black with the LED glowing. If i press the power button i just see the ZUK logo and the screen goes black, i tried to boot it into fastboot but no luck. I somehow managed to get into the 9008 mode but while flashing with QFIL i get the sahara error saying unable to read header or something and with MiFlash i am getting "cannot read hello packet"
Any Help will be appreciated
Click to expand...
Click to collapse
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
ozi87 said:
Onces that you are in 9008 mode you need to use ADB
"Adb reboot edl"
You are a lucky guy, i needed to conect grenn and black cable of the smartphone to put in 9008 mode
Click to expand...
Click to collapse
So i plug my phone in 9008 mode and go straight to adb?
Kalp3sh S1NGH said:
So i plug my phone in 9008 mode and go straight to adb?
Click to expand...
Click to collapse
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
pixel0 said:
Have you both any idea about adb! Edl is itself 9008 mode also called download mode. Adb is debug bridge and it is used in OS to control it by this bridge from PC.
Click to expand...
Click to collapse
yes exactly, that's why i asked.
pixel0 said:
did you flash through twrp? and if your bootloader if unlocked then you should have 5 sec bootloader placeholder from where u can reboot recovery . and if you are stuck into something different then it will be difficult to recover but possible. for sahara fail , play with settings in qfil like emmc, reset ,etc and try.And you can remove the port from device manager and retry if u r getting 9008 port.You should not get sahara fail. You will be get out of this easily just try things suggested. Your device is live as zuk logo is showing so dont worry.
And use latest qfil: http://www.androidbrick.com/download/download-latest-qualcomm-flasher-qfil-qpst-2-7-460/#
EDIT: Try this too-
Bootloader mode: shutdown state, press and hold the volume plus key + volume minus key, while the usb line connected to the computer until the release button.
Qualcomm QPST (9008 port) : shutdown state, press and hold the volume plus key, press the power button at the same time usb cable to connect the computer. This mode is a black screen state.
For recovery: press and hold the power key + the volume plus key + the volume down key until you release the release button.
Click to expand...
Click to collapse
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Kalp3sh S1NGH said:
I think the bootloader is locked again, i can't boot into recovery. I tried the latest QPST and still getting unable to read packet header read 0 bytes error and Sahara Failed.
Click to expand...
Click to collapse
If bootloader is locked or unlocked , 9008 mode will work for sure. Also Use buttons combination to enter fastboot if u can then unlock and flash recovery from there .
To avoid this problem again, when you flash stock roms after using Custom Roms, make sure you format the System, data and cache partitions back to EXT4 format, since Stock firmware (even the moded ones) DOES NOT support any other System/Data/ Cache format.
After loading the bootloader, the phone will end with black screen and white led on. You just need to reboot on recovery again and advance format System/ Data/ Cache back to EXT4, connect the phone to the PC again, transfer the ROM file to the internal storage and make the Flash again...
Hope this help you
Hello,I recently flash a wrong file and now my device is straight up dead no logo nothing the led blinks for a mini second and turns off I tried using qfil and mi flash but it was getting detected as 900e port and wasn't even detected on mi flash I tried updating drivers and got it to 9008 but still it would get stuck forever when I hit download asap in qfil or would show some sahara port error and still no detection on mi flash even in 9008 mode I tried over 50+ times using the button combinations to get it to 9008 mode but every time it would be 900e any solution other than deep flash as I have just one type c cable and I may screw up
Press volume up key for 15 seconds, then press power button & insert usb (within a second) to pc..it will get it to edl mode..
probably your only way out is deep flashing, i've been through this
any solution for this ? i'm suffering the same
When pressed volume up and down key together and connected to pc it shows charging symbol then appears in my pc as qualcomm 9008 port then reboots .I'm trying to flash my device using qfil which needs phone to be in edl mode and my phone is not staying at edl mode so I can't flash it .Any advice will be really helpful.