Related
As the title says, my flashtool (0.9.10.1) isn't able to find the "R800i_4.0.2.A.0.42_Generic.ftf" file. Of course I installed the needed drivers.
Once I was able to downgrade to .42 but that was a long while ago.
I tried already these things:
Reinstall Flashtool
Install on another partition
Search for another ftf file (it's everywhere the same)
Viewed ****tons of manuals/videos
Does anyone knows what I could do?
Try using this tool. .42 firmware is available through this:
http://forum.xda-developers.com/showthread.php?p=40443742
Thanks to ozzmanj1 for posting about it
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
same issue here and the link that appears as a solution does no work on my case
gaizka71 said:
same issue here and the link that appears as a solution does no work on my case
Click to expand...
Click to collapse
That link is for unlocked bootloader, and you are probably on locked bootloader.
Just us PC Companion to flash stock firmware.
Or find find out why flashtool can't flash stock firmware. Possible reasons - solutions
-not in flash mode - power off phone, while keeping pressed back buton plug usb to PC
-bad download - redownload
-bad file - download from other source
-Flashtool can't read path of downloaded file (special letters in directory's path) - place file in C:/ or D;/
-unknow errors - start flashtool with admin rights
-phone not recognized - bad drivers, use drivers from flashtool folder
Solution
I had the same problem, where only 4.0.2.A.0.42 Global would not show up in the Flashtool ftf list. Version 0.62 or 0.42 CN would show up fine.
I used the firmware from this page: http://forum.xda-developers.com/showthread.php?t=1477440
Using an older version of Flashtool (flashtool 0.6.9.1) resolved the problem for me (http://www.4shared.com/file/-rYqPPug/flashtool-0691-windows.html).
You could file a bugreport with the Flashtool developers.
marcovtwout said:
I had the same problem, where only 4.0.2.A.0.42 Global would not show up in the Flashtool ftf list. Version 0.62 or 0.42 CN would show up fine.
I used the firmware from this page: http://forum.xda-developers.com/showthread.php?t=1477440
Using an older version of Flashtool (flashtool 0.6.9.1) resolved the problem for me (http://www.4shared.com/file/-rYqPPug/flashtool-0691-windows.html).
You could file a bugreport with the Flashtool developers.
Click to expand...
Click to collapse
Thanks a lot man! perfect solution.
i have an alcatel pop d3 and i am trying to restore it using sp flashtool
but when i load my scatter file only boot img and recovery img is found help please
I installed flashtool 0.9.22.3 and everything is ok but it doesn't show up the ftf file to flash it is in the .flashtool>firmware folder plz help me
zabitkha said:
I installed flashtool 0.9.22.3 and everything is ok but it doesn't show up the ftf file to flash it is in the .flashtool>firmware folder plz help me
Click to expand...
Click to collapse
Same her tng Flash Kernal On My X8 An It Wont Show The File At All :crying:
zabitkha said:
I installed flashtool 0.9.22.3 and everything is ok but it doesn't show up the ftf file to flash it is in the .flashtool>firmware folder plz help me
Click to expand...
Click to collapse
john_cena163 said:
Same her tng Flash Kernal On My X8 An It Wont Show The File At All :crying:
Click to expand...
Click to collapse
I solved the problem by manually let the FlashTool sync the devices databases from Github
1 - Connect to the internet
2- From FlashTool > Devices > Device Sync > Manual Sync
3- after it's done syncing close FlashTool and open it again..
4- it should say loaded ninety something devices (in my case 94)
5- choose flash > flashmode and choose a folder that contains any correct FTF (not corrupted FTF file) whatever the names of the files are..
you should now have your device(s) listed in the Firmwares box with the FTF files after expanding the device name..
Have a good flashing
Dr.TheMaster said:
I solved the problem by manually let the FlashTool sync the devices databases from Github
1 - Connect to the internet
2- From FlashTool > Devices > Device Sync > Manual Sync
3- after it's done syncing close FlashTool and open it again..
4- it should say loaded ninety something devices (in my case 94)
5- choose flash > flashmode and choose a folder that contains any correct FTF (not corrupted FTF file) whatever the names of the files are..
you should now have your device(s) listed in the Firmwares box with the FTF files after expanding the device name..
Have a good flashing
Click to expand...
Click to collapse
Had the same problem. Confirmed this works. Thanks!
Friends, I'm there one week direct non-stop trying to root on my Sony Xperia T3 (D5106) 18.1.A.2.25 version, do not know what else to do, I've tried all the tutorials xda forum .. all give error .. when I give in flash D5103 model, error appears here, my T3 only works on the D5106 model .. How do I get to root on my Xperia T3 D5106 ??? For God's sake = ( :crying:
You can follow the tutorials found in other threads like http://forum.xda-developers.com/xperia-t3/help/how-to-root-xperia-t3-18-1-2-25-t3007487 or http://help.howproblemsolution.com/1377446/tutorial-root-xperia-t3-firmware-18-1-a-2-25 that show how to root a D5103. It works altough your phone will complain at startup that you have the wrong version (but it still works). To circunvent this you must flash an ftf file for the D5106. If you don´t find one you can generate your own ftf with flashtool, that should be installed in c:\flashtool.
1) start flashtool and go to Devices/Check Updates. Double click on D510X then click on D5106 tab. If you find the brand of your phone, double click it and flashtool will start downloading. If you don´t find your brand, you can add it to the list in flashtool\devices\D510X\D5106\custlist.properties. In my case I added 1 line with "1286-6141=AMERICAS-LTE" without the quotes. You find this information about your phone in C:\program data\Sony\Sony PC Companion\<youremei>\default-capability.xml , almost at the end under <filesystem> <productnumber> and <cdf> <productnumber>.
Save custlist.properties and you will see your brand in flashtool. Be patient waiting for download - it will bring almost 1 GB.
2) when download is finished, flashtool will automatically decrypt the filesets and open the "Bundler". There you should mark the whole folder list and move it to the right to the "firmware content". Now you can click on "create" and your ftf will be generated in the firmwares folder.
If the process ends successfully you will have generated an ftf and a torrent file.
Follow the steps in the tutorial to flash the .14 firmware, run the rootkit to root your device and use your generated ftf to flash the .25 firmware. Flash only the Kernel and unmark the wipe Data in flashtool.
I hope this helps, since it worked for me. happy flashing
Hey @low-rider, your method worked perfectly on my D5106 Thanks:good:
anyone can help me to root my xperia t3?
What model T3 do you have?
low-rider said:
You can follow the tutorials found in other threads like http://forum.xda-developers.com/xperia-t3/help/how-to-root-xperia-t3-18-1-2-25-t3007487 or http://help.howproblemsolution.com/1377446/tutorial-root-xperia-t3-firmware-18-1-a-2-25 that show how to root a D5103. It works altough your phone will complain at startup that you have the wrong version (but it still works). To circunvent this you must flash an ftf file for the D5106. If you don´t find one you can generate your own ftf with flashtool, that should be installed in c:\flashtool.
1) start flashtool and go to Devices/Check Updates. Double click on D510X then click on D5106 tab. If you find the brand of your phone, double click it and flashtool will start downloading. If you don´t find your brand, you can add it to the list in flashtool\devices\D510X\D5106\custlist.properties. In my case I added 1 line with "1286-6141=AMERICAS-LTE" without the quotes. You find this information about your phone in C:\program data\Sony\Sony PC Companion\<youremei>\default-capability.xml , almost at the end under <filesystem> <productnumber> and <cdf> <productnumber>.
Save custlist.properties and you will see your brand in flashtool. Be patient waiting for download - it will bring almost 1 GB.
2) when download is finished, flashtool will automatically decrypt the filesets and open the "Bundler". There you should mark the whole folder list and move it to the right to the "firmware content". Now you can click on "create" and your ftf will be generated in the firmwares folder.
If the process ends successfully you will have generated an ftf and a torrent file.
Follow the steps in the tutorial to flash the .14 firmware, run the rootkit to root your device and use your generated ftf to flash the .25 firmware. Flash only the Kernel and unmark the wipe Data in flashtool.
I hope this helps, since it worked for me. happy flashing
Click to expand...
Click to collapse
hello my friend,
i have de Xperia T3 D5106, and the last Flash tool. i don't kwon how creted the tft file.
Which folder files i have to move to the firmware content? to them Created,
Please help me
MDC413I said:
hello my friend,
i have de Xperia T3 D5106, and the last Flash tool. i don't kwon how creted the tft file.
Which folder files i have to move to the firmware content? to them Created,
Please help me
Click to expand...
Click to collapse
"C:\Users\(username)\.flashTool\firmwares"
the file below is an official android jellybean 4.3 firmware ftf file ...
you can use it to flash xperia m dual c2004 to stock firmware
use this torrent file to download direct ftf file
GENERIC INDIAN VERSION
ok sorry for inconvinience ...
lets try this... download the firmware from the given link and in that proceed as follow
step1: install xperifirm and open it
step2: after opening the xperifirm application select the option DEVICES from top
step3: now click on check updates .. a pop up opens in that select ur model (example : for xperia m dual click on xperia m dual ) now select ur phone model no i.e c2004 or c2005
step:4 now select the latest indian version i.e it will be written in as customized IN double click it
step5: now it will start to download firmware file for ur devices
AFTER DOWNLOADING THE FILE CLOSE IT AND DOWNLOAD FLASHTOOL (better go for version 0.9.18.6)
now its time to create a ftf file
step1: open flashtool and in that select tools
step2: In tools go to bundles when you click on bundles u will see an option called create click it
step3: A pop up opens now select the folder file where you have downloaded firmware
step4: Now after selecting source folder now double click on device box select the phone model and model number
step5: enter branding as you wish or else just type in Customized IN and version as 15.5.A.1.5
AFTER REPEATING ABOVE STEPS YOU WILL SEE A LIST OF FILES IN FOLDER LIST SECTION . NOW SELECT ALL FILES IN THAT SECTION AND CLICK ON RIGHT ARROW SYMBOL(->)
when you click on '->' symbol some files will gets transferred to firmware content section
step6: now finally click on create ... DONE your ftf file is ready
Now you can flash your device from flashtool
Thanks.... been looking for it
Error while downloading firmware
hemanthvarma said:
the file below is an official android jellybean 4.3 firmware ftf file ...
you can use it to flash xperia m dual c2004 to stock firmware
use this torrent file to download direct ftf file
GENERIC INDIAN VERSION
ok sorry for inconvinience ...
lets try this... download the firmware from the given link and in that proceed as follow
step1: install xperifirm and open it
step2: after opening the xperifirm application select the option DEVICES from top
step3: now click on check updates .. a pop up opens in that select ur model (example : for xperia m dual click on xperia m dual ) now select ur phone model no i.e c2004 or c2005
step:4 now select the latest indian version i.e it will be written in as customized IN double click it
step5: now it will start to download firmware file for ur devices
AFTER DOWNLOADING THE FILE CLOSE IT AND DOWNLOAD FLASHTOOL (better go for version 0.9.18.6)
now its time to create a ftf file
step1: open flashtool and in that select tools
step2: In tools go to bundles when you click on bundles u will see an option called create click it
step3: A pop up opens now select the folder file where you have downloaded firmware
step4: Now after selecting source folder now double click on device box select the phone model and model number
step5: enter branding as you wish or else just type in Customized IN and version as 15.5.A.1.5
AFTER REPEATING ABOVE STEPS YOU WILL SEE A LIST OF FILES IN FOLDER LIST SECTION . NOW SELECT ALL FILES IN THAT SECTION AND CLICK ON RIGHT ARROW SYMBOL(->)
when you click on '->' symbol some files will gets transferred to firmware content section
step6: now finally click on create ... DONE your ftf file is ready
Now you can flash your device from flashtool
Click to expand...
Click to collapse
Hey man, I encountered problem while downloading file from xperifirm. can you please help me with this? I tried to download z5 firmware to see if there is any problem with c2004 file but irrespective of device the problem remained same. I used xperifirm 5.0.0 and 4.9.1 but same problem
hhjadeja007 said:
Hey man, I encountered problem while downloading file from xperifirm. can you please help me with this? I tried to download z5 firmware to see if there is any problem with c2004 file but irrespective of device the problem remained same. I used xperifirm 5.0.0 and 4.9.1 but same problem
Click to expand...
Click to collapse
Follow this youtube video
hemanthvarma said:
Follow this youtube video
Click to expand...
Click to collapse
Found the solution. Updated my .Net framework and downloaded files successfully.
I need E5663 30.1.B.1.33 for india generic in order to gain root access
I downloaded an ftf from xperia blogspot
Its name was E5663 30.1.B.1.33 R7A INDIA GENERIC
But inside the flash tool it was showing
E5603 30.1.B.1.33
Not E5663
I tried a lot to gain correct ftf but couldn't find it
Help me please
altmash mirza said:
I need E5663 30.1.B.1.33 for india generic in order to gain root access
I downloaded an ftf from xperia blogspot
Its name was E5663 30.1.B.1.33 R7A INDIA GENERIC
But inside the flash tool it was showing
E5603 30.1.B.1.33
Not E5663
I tried a lot to gain correct ftf but couldn't find it
Help me please
Click to expand...
Click to collapse
It doesn't need to be India, it can be any country as long as it says generic
ih8redsn0w said:
It doesn't need to be India, it can be any country as long as it says generic
Click to expand...
Click to collapse
Thnks bro
But why in flash tool
It is showing E5603 rather than E5663
I mean i downloaded the file for E5663
In xperia blogspot the file i was downloaded also show as E5663 30.1.B.1.33
but when i started flashtool flash mode
The ftf stated for e5603 not e5663
In xperia blogspot website the file uploader stated that
"E5663 also not show in the devices list of flash tool when creating ftf or doing any other stuff. That's why it is showing E5603. You can flash with this and the mobile will show E5663 in ABOUT PHONE menu"
So my question's are
1. Is it safe to flash with this ftf in flash tool
2. I am on marshmallow and i want lollipop. Flash tool has added flash script as 30.1.XX.fsc
But the ftf file i had has no fsc script inside it when i cheked through winrar.
3. Is there no need of "fsc script file" in the FTF when flash already added the fsc script in flash tool devices folder.
4. Does Both locations has to be with FSC script i mean in FTF
and flash tools devices folder
Or it should be either in ftf or in flash tool devices folder.
Sorry for
1. BAD English
2. Too many questions
3. Confusing repeated questions
Hi,
i would like to know if there is any way to flash a ftf file yet?
With the latest Flashtool 0.9.23.2 you can already download the roms for XA1 but you cannot create a ftf file, because the device is not listed yet.
I found some ftf .files on the net but i can't flash them also with flashtool. the firmware is not listed. if i use a older version of flashtool, the firmware is listed,
but when i want flash the file, it's says no loader for the device has been found.
i have a branded firmware, and would like to flash a unbranded version of the firmware.
if i use xperia companion, i only can flash the same branded version.
i tried to trick the xperia companion, the software loading the firmware files in the background if using software repair.
i tried to replace the file with the ones downloaded with flashtool/xperifirm, but it won't work.
i
Yes. download newflasher tool from my signature
It is now. Since today or for some days, but I checked today. Already started creating ftfs for my forum.
Hello friends i can not flash stock firmware on G3223 is there a way? I have custom recovery but i erase system to have a clean installation but flasher from androxyde dosent work nor munjeni one. Any advise? I have the stock ftf Thanks
jotade said:
Hello friends i can not flash stock firmware on G3223 is there a way? I have custom recovery but i erase system to have a clean installation but flasher from androxyde dosent work nor munjeni one. Any advise? I have the stock ftf Thanks
Click to expand...
Click to collapse
Hello mate I have had that issue and it was resolved by using a fresh download of xperiafirm (via it built in button on flash tool) then click yes to use script!!
@jotade
You need add support for XA1 Ultra to Flashtool. Download this: https://drive.google.com/open?id=0B7UqjtcLWyHOMDhGTjlJLW15TlE, than unpack it. Start Flashtool and uncheck AutoSync (Devices -> Device Sync -> Auto Sync -> Off). After that copy unpacked G32XX folder into /Flashtool/devices folder.
Than You can create and flash the firmware on Your device.
There are modded by me XA1 .properties and .fsc files to match Ultra (second one has only name changed to match fws' name).
ch3mn3y said:
@jotade
You need add support for XA1 Ultra to Flashtool. Download this: https://drive.google.com/open?id=0B7UqjtcLWyHOMDhGTjlJLW15TlE, than unpack it. Start Flashtool and uncheck AutoSync (Devices -> Device Sync -> Auto Sync -> Off). After that copy unpacked G32XX folder into /Flashtool/devices folder.
Than You can create and flash the firmware on Your device.
There are modded by me XA1 .properties and .fsc files to match Ultra (second one has only name changed to match fws' name).
Click to expand...
Click to collapse
Thanks my friend but i already flash and root whitout doing that. Everything is great know. ROOT is the best
Hi guys, I've been poking around on here for the first time in many years..
Are you guys telling me that I can get a stock .ftf for my XA1 Ultra (G3221) via flash tool, if I first update flash tool into something that @munjeni maintains? Also, this new flashtool runs in x64 Ubuntu 16.04?
I would like to unpack the stock ftf, tweak it for root, repack it and flash it with flashtool - having first tried the stock ftf. I've done this before a while ago.
So far with the G3221 I unlocked the bootloader, and that's it. There are many adverts on this site on a smartphone, and it makes searching these forums difficult so I've struggled to find out what I need. Your guidance would be appreciated.
You can use both Flashtool (not sure if it supports Ultra already, but I attached, few post back, neede files to add support) and Xflasher. Both will flash the stock fine. Both works fine on Linux.
However You cannot flash modded stock using this apps. There is no way to repack it to .sins and than .ftf to make it seen and flashable by any of this 2 apps. It was possible with X10, but XA1 is not X10...
Only way to flash modded rom i use recovery. If Im right there is TWRP for XA1 Ultra already.
Sent using XT1562 - Resurrection Remix/Optimus Kernel
ERROR - Error flashing. Aborted
ch3mn3y said:
@jotade
You need add support for XA1 Ultra to Flashtool. Download this: url, than unpack it. Start Flashtool and uncheck AutoSync (Devices -> Device Sync -> Auto Sync -> Off). After that copy unpacked G32XX folder into /Flashtool/devices folder.
Than You can create and flash the firmware on Your device.
There are modded by me XA1 .properties and .fsc files to match Ultra (second one has only name changed to match fws' name).
Click to expand...
Click to collapse
Flashtool needs "loader.sin", but it isn't included in the folder you provided. Any idea what to do?
user845 said:
Flashtool needs "loader.sin", but it isn't included in the folder you provided. Any idea what to do?
Click to expand...
Click to collapse
It's not needed. It was with older devices, but not XA1.
ZUK Z2 Pro ✓ᵛᵉʳᶦᶠᶦᵉᵈ