Develop Bugs

Help restoring stock for Three UK network?

Hello everyone, i was using DEV edition of Loli but today for some reason ive lost signal, the network shows unavailable, tried using SIM on iPhone that i had around working fine. Tried restoring to factory still same problem. So now want to send this back to Three or HTC for warranty but want to restore to Three UK factory firmware. Any tips?
my device Unlocked and S-Off

I'm getting FAILED (remote: 32 header error) when flashing from oem RUU screen

What is your current CID?

Deadeye* said:
I'm getting FAILED (remote: 32 header error) when flashing from oem RUU screen
Click to expand...
Click to collapse
If you're trying to flash the RUU ZIP you HAVE to use htc_fastboot.exe as the Google fastboot file can't flash the ZIP. You can get it here (I pulled it from the latest EU RUU)

at the moment i'm flashing from SD card, that finds that file automatically. my CID is 111111
When my network reception disappeared i was listening to spottily din't do anything to the phone and din't install anything that required Root for 3-4 weeks, not sure what happened

So tried that method still no luck, hopefuly they will take it in warranty

Post your fastboot getvar all (minus serial no. & imei no.)
I believe you need x.xx.771.x ROM and firmware version because your device is H3G, and I have all versions x.xx.771.x backups

I'm trying to relock my bootloader using this guide on my mac http://www.pocketables.com/2014/07/nondestructively-lockrelockunlock-s-htc-one-m7m8-bootloader.html
but when i do su i'm getting this error message:
/system/bin/sh: su: not found
127|[email protected]_m8:/ $
It same happens on windows

Getvar:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.25.214500021.06G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.401.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid:
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!

Deadeye* said:
I'm trying to relock my bootloader using this guide on my mac http://www.pocketables.com/2014/07/nondestructively-lockrelockunlock-s-htc-one-m7m8-bootloader.html
but when i do su i'm getting this error message:
/system/bin/sh: su: not found
127|[email protected]_m8:/ $
It same happens on windows
Click to expand...
Click to collapse
You need SuperSU installed to run that lock command
If you still have TWRP installed (not sure about other custom recovery), you can boot to recovery then run that command while in recovery (this way you don't need SuperSU installed)
just run adb shell
then that echo part
(only two commands)
Deadeye* said:
Getvar:
(bootloader) version-main: 4.16.401.10
(bootloader) cidnum: 11111111
Click to expand...
Click to collapse
With this EU WWE details, I don't know whether Three UK will accept your device under warranty ... someone else need to advise you as I'm not familiar with that region.
In my region ... if I have other Asia ROM even with LOCKED & S-ON status, they still cannot accept because the IMEI is registered under ASIA WWE which is x.xx.707.x

I'm in recovery now, but trying and getting this: error: device not found
Just to double check in bootloader i just select Recovery? or wait does it have to be Unofficial Recovery or HTC one?

This phone is going in HTC not Three so dont think that should cause any problems?

Sorted thanks, my device was showing Relocked so had to unlock it again. but now it shows Locket, now just need to get SD card and reinstall system, and send it to HTC only thing i have is S-Off so hope HTC wont be picky about this, because when i spoke to Support staff he did mention that unlocked bootloader will void warranty so not sure how to take on this

Soft Bricked the HTC One M8

HTC One M8
Unlocked and S-off
From UK so with international network
Cyanogenmod 11 i think
Clockwork recovery
Soooo i bought the M8 secondhand with Cyanogenmod installed, however, i couldnt do any updates due to error status 7. i tried the normal fix (delete code which checked authorisation of phone) but to no avail. since then the error came back and i managed to get a different error on reboot: "root access possibly lost. fix?". I've cleared cache(s) and done a factory reset. No matter what i pressed it would be in a boot loop. I can still get to bootloader and recovery. then i tried to change the recovery to TWRP however when i try and fastboot, my device is not recognised by my laptop so i cannot add the ADB driver to the device.
sorry for sounding very vague / idiotic, i have no idea what i have done and no idea what i am doing to try and fix it. that means sadly i will need to be spoonfed the fix. if you need any more details or pictures of the problem let me know
thanks in advance

josborn42 said:
i couldnt do any updates due to error status 7. i tried the normal fix (delete code which checked authorisation of phone) but to no avail.
Click to expand...
Click to collapse
Are you trying to update to CM12.1? If so, the error is for a reason, and not to be bypassed in the way you describe.
If you are on an hboot older than 3.19, I don't think it will work with CM12 and 12.1. You'll need to update hboot (and rest of firmware, preferably) to proceed.
Also, CWM may be too old for CM12 as well.
josborn42 said:
then i tried to change the recovery to TWRP however when i try and fastboot, my device is not recognised by my laptop so i cannot add the ADB driver to the device.
Click to expand...
Click to collapse
Not sure what you mean here. Are you trying to install HTC Sync (and corresponding driver) by connecting the phone?
You can just do an XDA search for "simple adb" and you will find a couple really easy adb/fastboot installers.

how do i see what hboot i am on? and how would i update it?
i've installed HTC Sync but it doesn't recognise my phone being connected (so i cant view any files on the phone) and i've installed a simple ADB/fastboot but i can't see the driver option when trying to add it to my phone on Device manager. i have got to the stage whereby i have the ADB/fastboot folder and have the TWRP file in the same folder, just i cant get any further.
where would i begin getting to cyanogenmod 12.1, or would it be easier to revert back to a basic android os?
i know this is probably incredibly frustrating for you as i am a complete novice, but i greatly appreciate your help
i would post pictures to help but i cant as im a new member, i will when i can

josborn42 said:
i've installed HTC Sync but it doesn't recognise my phone being connected (so i cant view any files on the phone)
Click to expand...
Click to collapse
This in itself does not mean the phone is not connecting by fastboot. And fastboot is the important thing here, so we can update TWRP, etc.
Try rebooting into fastboot mode, and try the command and see if your phone's ID is returned: fastboot devices
If you don't get the phone's ID and just "waiting for device" you do indeed have some type of USB connectivity problem.
josborn42 said:
how do i see what hboot i am on? and how would i update it?
Click to expand...
Click to collapse
Boot into bootloader, andyour hboot number is listed near the top of the screen.
Since you are s-off, its fairly easy to update the firmware (and I would suggest to update all the firmware, not just hboot) by flashing the proper firmware.zip. But let's determine whether that is even the problem, before we worry about flashing firmwares.

hboot is: 3.16.0
also my phone is detected by my laptop so all is well there
i have installed a simple 15 second ADB file but am unsure how to proceed from here

josborn42 said:
hboot is: 3.16.0
Click to expand...
Click to collapse
Your firmware is very old, so will need to be updated to run CM12.1. Also, newer versions of TWRP will not run with your old hboot.
Do a fastboot getvar all, and post the output, but delete your IMEI and serial numbers (as these are private info). Need more details on the phone (particularly CID) in order to know how to proceed.

(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s

josborn42 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.107s
Click to expand...
Click to collapse
I'm going to suggest WWE/International firmware. The updates are available way before O2 updates.
Download this firmware (it also includes TWRP2.8.4.0). Rename it to firmware.zip and place it into your fastboot folder.
Next, boot into fastboot and change your CID to superCID (it won't flash with the O2 CID)
fastboot devices to make sure you are connected (a bunch of letters and numbers/your serial# means you are)
fastboot oem rebootRUU (a black screen with the HTC logo means you are in RUU mode)
fastboot oem writecid 11111111 (eight ones) You are now superCID!
Now flash the firmware
fastboot flash zip firmware.zip
If you get "error 90 hboot pre-update" (and you probably will with how old your current firmware is) run the same command again and the firmware will flash properly. The first run only updated your hboot.
The process will stop at 75% to 90%. That's normal and gives you a chance to check your console output. The last few percentage is the reboot.
The bar will fill to 100% after you enter fastboot reboot-bootloader
That's it. Good luck!

thank you both so much! so now do i just download the appropriate cyanogenmod version and flash it over?

josborn42 said:
thank you both so much! so now do i just download the appropriate cyanogenmod version and flash it over?
Click to expand...
Click to collapse
Yes. But there are more ROMs out there as well. Try them out and find the one that suits your needs best.

hi there i have htc one m8 rooted s-on & software status is modified
i got a new update so i flashed the stock recovery then downloaded the update and pressed install
it was loading the update and suddenly the screen frozen on the htc ONE screen without responding
i tried the volume down + power button nothing happened then i tried volume up + power button
it reboots and freezes on the same screen - tried to remove the sim & sd card but nothing happened
what should i do plz ???
cid : htc_j15
build number : 4.16.401.10

HTC M8 at&t human error

Please help me...
I hve m8 at&t.
Root with towelroot succes
Next i install twrp manager from google play. But i wrong choose device with htm one x version. After install success my device reboot.. many problem coming..
1. Light display off
2. Stuck fastboot/Hboot
3. Locked bootloader
Try solution
1. Unlock bootloader but same result for many times. error code 150
2. Flash stock RUU via hboot but same stuck with light off
Just info my device S-OFF.
Try info fastboot getvar all, serial number is ^$&$^#^&@&¥€#/ unknow
Please help me...
Sory for bad english

dinacell33 said:
Please help me...
I hve m8 at&t.
Root with towelroot succes
Next i install twrp manager from google play. But i wrong choose device with htm one x version. After install success my device reboot.. many problem coming..
1. Light display off
2. Stuck fastboot/Hboot
3. Locked bootloader
Try solution
1. Unlock bootloader but same result for many times. error code 150
2. Flash stock RUU via hboot but same stuck with light off
Just info my device S-OFF.
Try info fastboot getvar all, serial number is ^$&$^#^&@&¥€#/ unknow
Please help me...
Sory for bad english
Click to expand...
Click to collapse
S-Off? Easy fix.
Run the latest AT&T RUU. (manual update instructions in the link ~ the RUU download is at the end of the instructions)
Then flash the proper TWRP for M8.

Thanks bro...
Sory for late my reply
Ruu exe my device not connect/ error 170
But when ruu is running i copy file rom.zip from %temp%.then rename to 0p6bimg and flash via hboot success.
But device show info on boot proses "warning: device tree is not totally matched" = camera blur/light display when on bootloader still off/touch screen not match.
I hope u can fix my problem..
Info in case model : 0p6b110 htc m8x
Info in bootloader : m8_ul_ca even thougt m8_ul_ca is 0p6b120 . What is true or match my device???

dinacell33 said:
Info in case model : 0p6b110 htc m8x
Info in bootloader : m8_ul_ca even thougt m8_ul_ca is 0p6b120 . What is true or match my device???
Click to expand...
Click to collapse
The product ID (m8_ul_ca) is probably correct. We've seen reports here of a number of devices that have had their back covers swapped to remove branding (in this case, to remove the AT&T logo) and therefore wrong model number on back.
Although that doesn't explain why you have the device tree error when running the AT&T RUU. Please do fastboot getvar all, and post the output (delete IMEI and serial number before posting) so we can see more info about the phone.

(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.2133156.UA15G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.401.10
(bootloader) version-misc: XA SHIP S-OFF
(bootloader) serialno: V+±ê ?-{ùp옷æ;
(bootloader) imei: 35871xxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B1****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 098a72e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
i dont know about my serial number.
In bootloader show : m8_ul_ca_xa ship s-off. What is ul_ca_xa???
Fist time i wrong choose twrp version with htc one X. My device stuck on bootloader with light off
Please help me broo...
Sent from my Mi 4i using XDA-Developers mobile app

htc one m8 not IMEI not showing and baseband unknown

i have htc one m8 using cm nouget latest but suddenly phone got off because of low battery and after that i am not able to get any signal and my phone is not showing any IMEI and baseband is unknown.
i have tried to install others roms but not succeeded.
i have tried to restore to stock from twrp nandroid backups from below thread but my phone is still showing baseband unknown and not showing any IMEI
https://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
my bootloader is unlocked and s-on.
i am trying to find ruu file.
if anyone can help to find ruu file or can tell me how to get rid of this Imei problem(not getting any signal) that would be great
my htc one m8 get var all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.29.214500021.12G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT4xxxxxx639
(bootloader) imei: 35244xxxxxxxx19
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B65000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
please help me to get my phone usable .
i can use stock rom or any other rom.

here is the RUU,zip
https://www.androidfilehost.com/?fid=24591000424941691
and here is how to flash do all the steps ( use the RUU from the link above )
http://forum.xda-developers.com/showpost.php?p=64926626&postcount=6

Htc one m8 whl
I have been facing a trouble with HTC ONE m8 WHL
when the device came to me wireless is working but there is no traffic
I tried to flash the phone but the problem was still but in addition there is no baseband
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.0119
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.20.654.10
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:--------
(bootloader) imei:--------
(bootloader) imei2: Not Support
(bootloader) meid: -------
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B7****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6400afe2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
This is the device information
Anyone can help me please
I tried a lot of RUU flash files kitkat or lolipop when the device is running for the first time
hands free activation was required and i passed it throw up the TWRP recovery

snow_man026 said:
I have been facing a trouble with HTC ONE m8 WHL
I tried a lot of RUU flash files kitkat or lolipop when the device is running for the first time
Click to expand...
Click to collapse
You shouldn't be trying "a lot" of RUUs. You should be trying only the correct RUUs for the Sprint M8. Flashing RUUs for other versions is dangerous, and can lead to permanent damage to the Sprint version M8.
https://forum.xda-developers.com/showthread.php?t=2729173
Did you buy this phone? And you received it with cell data not working? If so, you should return it to the seller (if possible) rather then messing around with it (possibly breaking it worse, and voiding any possibility of return to the seller).
Also, you should delete IMEI, serial number, and MEID from your post. These are unique to the device, and should never be posted online.

All the RUU files that i had tried for the same model ONE M8 WHL
No I didn't buy the phone but it's my job to make a software for the phones
When I received the phone cell data was working but the problem was there is no traffic when you turned on the wireless
But my problem now there is "no baseband"

snow_man026 said:
All the RUU files that i had tried for the same model ONE M8 WHL
Click to expand...
Click to collapse
This still doesn't tell me which RUUs you tried. There are 14 RUUs on the thread I linked. Which ones exactly did you try, and in what order? Did you use the exe or zip method (and if the latter, was it by htc_fastboot, or SD card method)? Did the RUU(s) install completely and successfully, or were there error messages? If there were error messages, what did they say exactly?
Basically, your posts are short on details. You should be specific and detailed as possible, when asking for help.
snow_man026 said:
When I received the phone cell data was working but the problem was there is no traffic when you turned on the wireless
Click to expand...
Click to collapse
Understanding that English may not be your native language. But I don't know what that means "there is no traffic". Can you try to explain another way (again, more details may help).
snow_man026 said:
But my problem now there is "no baseband"
Click to expand...
Click to collapse
Where are you seeing "no baseband". In the getvar you posted, it says baseband number 1.09.20.0119
You also did not delete the personal details (serial number, IMEI and MEID) from the getvar output, as I previously advised.

I'm so sorry for being late
I flashed the phone at the last time with this RUU
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3
This is my phone information while the phone is ON by XTC2CLIP
Reading information...
Using ADB mode...
CID list: [SPCS_004]
Main CID: [SPCS_004]
Model ID (MID): [0P6B70000]
Project: [M8_WHL_M60_SENSE70_SPCS_MR]
System version: [6.20.654.3]
Chipset: [msm8974]
Hardware: [qcom]
Serial no: [FA45PSF03010]
Release: [HTC/htc_m8whl/htc_m8whl:6.0/MRA58K/buildteam01071632:user/release-keys]
Bluetooth chipset: [Qualcomm WCN3680]
Buildline: [M8WHL_Sprint_WWE_M60_CRC_Sense70_Stable_MR2_harman]
Sense version: [7.0]
SKU: [Sprint WWE Harman]
Signed: [release-keys]
Android version: [6.0]
Android patch [2016-01-01]
Disk enecryption: [unencrypted]
Device: [htc_m8whl]
Read information completed.
and this the information while the device in the fastboot mode :
Reading common information
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.654.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ---------
(bootloader) imei: -----------
(bootloader) imei2: Not Support
(bootloader) meid: -----------
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B7****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Now the device state is : There is no Baseband when checked it from the system it means that there is no cell network in addition there is no imei in the normal mode
thank you very much

snow_man026 said:
I flashed the phone at the last time with this RUU
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6.20.654.3
Click to expand...
Click to collapse
Is that the only RUU you tried? Before you said you tried "a lot of RUU flash files kitkat or lolipop " and when asked which RUUs you tried, you list only one. So one of those statements is incorrect or incomplete.
Hard to diagnose the issue (or may give incorrect advice) is we don't know exactly, step-by-step, what you did, and the state of the device at each step.
One important example of this: Are you absolutely sure you only flashed Sprint RUUs? It's a known problem, that if you tried to flash a non-Sprint RUU or radio baseband, that it will result in a radio brick (possibly permanent, but usually can be fixed).
snow_man026 said:
Now the device state is : There is no Baseband when checked it from the system it means that there is no cell network in addition there is no imei in the normal mode
Click to expand...
Click to collapse
I am still wondering about the original state, where you said: "When I received the phone cell data was working but the problem was there is no traffic"
I asked before, what you meant by this. You still haven't explained (only given the current state).
Again, it's hard to properly troubleshoot the issue, when it's pretty clear we've only been given a portion of the info.

Thanks for keeping in touch
These are the RUU files that I had tried before
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WW
E_Harman_4.20.654.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418492_signed_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.20.654.10_Radio_1.09.20.0119_NV_SPCS_1.52_003_release_418492_signed_2_2
RUU_M8_WHL_L50_SENSE60_SPCS_MR_Sprint_WWE_Harman_4.25.654.14_Radio_1.09.20.0209_NV_SPCS_1.52_003_release_426233_signed_2
According to XTC2CLIP support all of M8_WHL flash files are Sprint or sprint and harman
then I tried this file
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_Harman_6 .20.654.3
I'm so sorry maybe I didn't explain my problem exactly when I posted it
"" I am still wondering about the original state, where you said: "When I received the phone cell data was working but the problem was there is no traffic"
I meant there was no traffic when you connected to wifi there was no data transfer and this problem was solved by flashing the latest file
Now my problem is there are no imei and baseband in the normal mode but in the fast mode are exist

Try the older RUUs, like 2.16 or 3.30, and see if that fixes the "no baseband' issue. If so, try to RUU back to a more current version (6.20) and see if the fix "sticks".
Of try to flash the firmware only, and see if that helps (not exactly the same as flashing an RUU, so be sure to read the instructions on how to flash firmware). Firmware and instructions are on the same thread as the Sprint RUUs, which I linked earlier.

redpoint73 said:
Try the older RUUs, like 2.16 or 3.30, and see if that fixes the "no baseband' issue. If so, try to RUU back to a more current version (6.20) and see if the fix "sticks".
Of try to flash the firmware only, and see if that helps (not exactly the same as flashing an RUU, so be sure to read the instructions on how to flash firmware). Firmware and instructions are on the same thread as the Sprint RUUs, which I linked earlier.
Click to expand...
Click to collapse
I know how to flash firmware thanks for help
I will inform you with the result
thanks a lot

[HELP] Trying to root m8, can't enter recovery/bootloop.

Hello xda community, I have very little experience in programming or rooting phones, and I really need help rooting my phone which I think is the International version of the M8 (or normal I really have no clue)
I've browsed through the internet looking for tutorials and such and I stumbled upon xda, but the noob-proof software I found here didn't do the job for me. So here is what I have:
Using the All-In-One-Toolkit, I successfully managed to unlock the bootloader within a few minutes, I then proceeded to flash a recovery to the phone while in bootloader (tried both the TWRP 2.7.0.2, and the latest version of it) but then I go from bootloader: Hboot > Recovery, my phone restarts, showing me the green HTC text, and the black android font on the bottom. Now, I waited for 20 min or so, but I noticed my phone was doing nothing and just heating up. ( I also tried using the perm root command but the result was also a bootloop)
I ended up holding down the Power button for several seconds, and the m8 started up like normal again. I did my research and I believe it to be a bootloop (correct me if I'm wrong ! )
I then looked for more information on the forum, in the FAQ section it said to simply erase the cache, which I did, but the phone wouldn't enter recovery still. I got really mad
So please help me find a solution or tell me what more info you need ! I would hate to have done a reset for nothing ^^
Thanks!

Post fastboot getvar all result (delete imei & serial no.)
What you described, seems like you probably not have a M8 (as happened to few others)

(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.21.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__031
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0b9a12e3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
here's the result ^
Really ? Not a M8 ? The box I got my phone from states : HTC One M8s, weird...

Yeah.. correct. Your device is M8s not M8; they are two different device.
Here is the thread for your device - https://forum.xda-developers.com/ht...ral/make-custom-recovery-htc-one-m8s-t3114245
Ask there, someone will be able to point you to correct TWRP version to use.
Anything for M8 won't work on M8s.

ckpv5 said:
Yeah.. correct. Your device is M8s not M8; they are two different device.
Here is the thread for your device - https://forum.xda-developers.com/ht...ral/make-custom-recovery-htc-one-m8s-t3114245
Ask there, someone will be able to point you to correct TWRP version to use.
Anything for M8 won't work on M8s.
Click to expand...
Click to collapse
Oh man, that sucks... Anyways thanks for the quick help, much appreciated!