S4mini value edition
How can I customise a stock official samsung rom?
The only way I know how to get the stock rom is to flash the stock firmware that also changes the kernel and radios, the ones from sammobile used with kies.
I don't know how to get a twrp flash able zip.
the end result is that I would like to take that zip containing the official and delete bloatware Samsung apps that are not needed or that I don't use, add root and make other tweaks.
all you need is this -> www .androidfilehost.com/?fid=95916177934551258
just flash it with your ODIN select settings as following:
Check Auto Reboot / Uncheck F. Reset Time
select AP the .md5 file then flash.
Related
Do all the debloated EC09 ROMs require that you already have EC09 stock? Or, that you have rooted and upgraded via the previous releases (EC03/07)? I've been following like a dozen ROM threads and I'm getting confused.
I have the Verizon model running DL17 and rooted. I am unable to get the official/built-in updater to connect, not sure if it has anything to do with being rooted already. I'm tempted just to walk into Verizon and have them do the official EC09 for me but I'd much rather have a debloated ROM courtesy of you excellent XDA developers!
So, what is the simplest way to upgrade to an EC09 ROM? Is there one which can be directly applied over DL17?
thank you for any suggestions!
Yes, it is. It's likely that the reason you can't get the OTA is due to the fact that you are debloated. So, you have a couple of options, here.
1. Go to http://forum.xda-developers.com/showthread.php?t=1316769 and get DL17 Factory stock rom+radio+kernel (odex) all in one odin flash: Here [unzip to get an odin img]
You might as well get the recovery.bin and red update.zip in the first section while you are there. You will need them later.
2. Flash that in Odin, then attempt the OTA.
NOTE: Flashing this rom will wipe data, so back up anything you want to keep.
3. (AFTER THE OTA TAKES) Go to http://forum.xda-developers.com/showthread.php?t=1500149
and get that ROM.
4. put that ROM, and the update.zip (If it's not already on your card) on the root of your sdcard.
5. Flash recovery bin in ODIN, reboot OFF.
6. Boot into recovery, get into cwm, flash the rom, wipe dalvik, reboot.
Option 2. If you don't wanna do that, or the OTA doesn't work, is to go to
http://forum.xda-developers.com/showthread.php?t=1502042
And get either the Heimdall full package, or Odin full package (whichever you are comfortable with) and the PIT file.
Flash whichever way you choose, Both are rooted with busybox. If you want to deodex (Must for flashing mods/themes) go through steps 4-6 above.
Hi All,
So I wanted to go back to a stock TW nandroid i made after rooting so that I could get the official sammy JB rom only to find out that my external SD card where I have all my backups is pooched....
My question is, can I use Mobile Odin to flash a stock image right from my device? I am using a mac and don't have enough free space to setup a virtual machine.
Thanks in advance,
Mike
hedphones said:
Hi All,
So I wanted to go back to a stock TW nandroid i made after rooting so that I could get the official sammy JB rom only to find out that my external SD card where I have all my backups is pooched....
My question is, can I use Mobile Odin to flash a stock image right from my device? I am using a mac and don't have enough free space to setup a virtual machine.
Thanks in advance,
Mike
Click to expand...
Click to collapse
Yea it can read the official thread for more help
http://forum.xda-developers.com/showthread.php?t=1347899
Says all the details just for that too. lemme just quote the parts that you are asking about.
"Mobile ODIN will attempt to detect if the OTA wants to flash kernels, recoveries, and modems, and if so will compare the signatures to your currently installed kernel, recovery, and modem. Should the comparison fail, it will offer you the choice to disable the check and the patch inside the OTA. This will allow you to flash the OTA without switching away from your current custom kernel or switching to whichever modem the OTA expects. Of course, if you have selected a kernel, recovery, or modem to flash, it will compare against the selected image instead of the currently installed one.
Mobile ODIN will also compare the OTA's fingerprint checks against the current system fingerprint. If the fingerprint does not match, Mobile ODIN will offer you the choice to disable the check inside the OTA. If you have selected a system image to flash, it will try to find out the image's fingerprint instead. It is not generally recommend to patch out the fingerprint, but sometimes it is needed.
It will also go through all the file signature checks inside the OTA, and compare to the current system files. If files are found to differ Mobile ODIN will offer you the choice to disable the checks and patches inside the OTA. When you have the wrong CSC flashed, it is common for a small number of files (30 or so) to differ. These files usually don't really matter for the firmware's operation. Note that this check will not be performed if you have selected a system image to flash - all files must match signatures in that case, or the OTA will fail." this is from the thread good luck updating
Mobile Odin
hedphones said:
Hi All,
So I wanted to go back to a stock TW nandroid i made after rooting so that I could get the official sammy JB rom only to find out that my external SD card where I have all my backups is pooched....
My question is, can I use Mobile Odin to flash a stock image right from my device? I am using a mac and don't have enough free space to setup a virtual machine.
Thanks in advance,
Mike
Click to expand...
Click to collapse
yes mobile odin will work. I used the lite version last week to restore to stock because i was too lazy to get my computer. it does work and you could use ever root if you want to keep it rooted or just flash a stock rooted img. the new official sammy jb rom rooted is now available for you to flash via odin so i'd suggest that.
If you want to be up to date with T999V phone valid for everyone, stock rom, any custom rom. doesn't matter, work for any scenarios.
Most up to date file by 2014/03/03
You'll need this:
Odin 3.07
T999VVLUEML2_T999VYVLEML2_T999VVLUEML2_HOME.tar.md5
UPDATE-SuperSU-v1.93.zip
philz_touch_6.19.3-d2lte.tar.md5
DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.1.zip
DE-SAMSUNGNIZER_SCRIPT_V5.0.0.zip Optional ( to remove lot of samsung crap if you stick with Stock T999VVLUEML2_T999VYVLEML2_VTR )
You have to be in download mode, hold HOME+VOL_DOWN+POWER)
Then connect with USB
Now with the PDA button in Odin, select the tar file in VTR-T999VVLUEML2-20140104101338.zip and Install
Then install philz_touch_6.19.3-d2lte.tar.md5 ( or any other recovery in tar file ) Like the rom, use the PDA button to install it.
Now reboot you phone in recovery( hold HOME+POWER+VOL_UP )
In the recovery, install UPDATE-SuperSU-v1.93.zip and DE-SAMSUNGNIZER_KNOX_REMOVAL_SCRIPT_V1.1.zip ( if you want to get root acces and remove knox new samsung securty)
Optional install DE-SAMSUNGNIZER_SCRIPT_V5.0.0.zip
Reboot
And now you have the latest Bootloader and Modem(baseband), rooted and without Knox for T999V and can install any other roms you want.
I'm using note 2 stock rom version 4.1.2 baseband DXDLK7 but I flashed DXDLK5 to fix problem about SOS Call only , the problem is when I flash stock rom 4.3 or 4.4.2 I got SOS only problem again and I stuck in 4.1.2 forever . I flashed modem MJ9 but still not work , and all modem download link in this forum died since hotfile server down . All new custom rom such as lolipop and marshmallow require baseband modem XXUFND3 but i can't go to that modem because SOS Call problem . So how can I fix this problem ? Thanks
Make EFS backup and then:
Download firmware from sammobile for your device i.e. N7100.
Install 7zip to extract it and copy SBOOT. and modem, then use 7zip again and pack (*.tar) those files separately, so you will have sboot.tar and modem.tar
sboot is the bootloader and modem is...modem.
Use Odin to flash modem and bootloader in download mode, then use also Odin to flash TWRP.
Then go to recovery mode and install your ROM using instructions in ROM thread (1st post).
You have to know that stock ROMs are identified by letters and numbers, the newest is probably OE1, I used bootloader and modem from French ROM.
yaro666 said:
Make EFS backup and then:
Download firmware from sammobile for your device i.e. N7100.
Install 7zip to extract it and copy SBOOT. and modem, then use 7zip again and pack (*.tar) those files separately, so you will have sboot.tar and modem.tar
sboot is the bootloader and modem is...modem.
Use Odin to flash modem and bootloader in download mode, then use also Odin to flash TWRP.
Then go to recovery mode and install your ROM using instructions in ROM thread (1st post).
You have to know that stock ROMs are identified by letters and numbers, the newest is probably OE1, I used bootloader and modem from French ROM.
Click to expand...
Click to collapse
Thanks , i'll give it a test later , hope it's work
hmmm i can't see sboot file in the .tar rom file , only boot file
Hello guys,
I am using I9195 . i was on stock KK 4.4 . am flashes CM13 official by TWRP 3.0.1-0 it is successfully booted and working fine. But now i am want to revert back to Stock KK 4.4 again i afraid to hardbrick my device. If anyone guide me to how to revert back i will thankful to him.
Thanks in advance.
Sent from my AO5510 using Tapatalk
first download your own region stock firmware tar.md5 for the intended model. in the link below it is for my model, do not flash that, search for yours model and region.
you can follow steps in the link below and also you can download firmware from there.
http://www.sammobile.com/firmwares/download/62533/I9190UBUCOF1_I9190PNTCOD1_PNT/
here i copy paste the instructions.
Instructions
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
i have i9190 model, and have flash stock firmware alot form cm13 or 12.1, never bricked, also when you done flashing goto recover and restore factory setting and clear cache if stuck at samsung logo.