Related
I flashed my HTC Desire with O Desire. It didn't reboot and now it can't access the recovery. I partitioned my sd card before flashing .. but I forgot to put my files back .. so that may be the problem. Is my recovery messed up now ? How would I be able to fix this without going into recovery !
It's a Telus SLCD one. It goes into the bootloader fine, but it won't go into recovery . I've tried using unrevoked again to put another recovery but I realized that I can't activate USB debugging in the bootloader.
Please help, I'm a university student living away from home, and I have no way to contact my family!
I had a similar problem trying to install a custom rom on my telstra slcd desire, and buggered the OS and recovery. I was able to recover back to stock by going into fastboot on the phone then flashing an official RUU from HTC.
jayme said:
I had a similar problem trying to install a custom rom on my telstra slcd desire, and buggered the OS and recovery. I was able to recover back to stock by going into fastboot on the phone then flashing an official RUU from HTC.
Click to expand...
Click to collapse
Could you give me a step by step on how to do that?
Also would it matter which RUU I use ? I'm planning to try rooting it again anyway.
I'd hate to double post but I need to fix this problem ASAP. I have no way to contact my family because we only communicate through phone. Is there anyway to fix this problem ?
I also tried using an RUU but it failed, probably because I don't have a goldcard. But how can I make a goldcard without the phone ?!
Try running this official stock RUU that is compatible with SLCD Desires, link is here:
http://shipped-roms.com/shipped/Bra...1.00.32U_4.08.00.09_release_137222_signed.exe
I've tried this rom, it doesn't work :S. It's most likely because it's a Telus desire and I have no goldcard. Any suggestions? I'm really running out of ideas. :S
EDIT: Is it because my current version is 1.29.661.1 and the install shield is trying to "upgrade" it to 1.21.405.2 ?
Can you try the "reset device" option in either h-boot or fastboot. I've had a similar ordeal on a hero and that took care of it, I was able to boot back into recovery.
Sent from my HERO200 using XDA App
Hi,
I was trying to root my phone with the guide that is on this forum, but then when i restarted my phone, it was stuck on the white "HTC" boot screen. Then i tried to do a "Factory Reset" in hboot and rebooted, and still stuck on the boot screen. I tried to put a PD98IMG.zip as it was prompted in hboot as "no image or wrong file", so i loaded PD98IMG.zip onto my SD card, and still not working. any suggestions ?
my phone is S-ON.
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Mine took 30 mins to boot once. You could try the ruu look in dev section, you just flash it from Windows, then start again. Was your she branded?
Sent from my Desire HD using XDA App
Howling Wolf said:
I guess your phone is branded ? If that's the case, you need to follow the tutorial for a goldcard.
Also, if your rom is 1.7x or 1.8x, you can't root it. You have to follow the downgrade tutorial 1st
Click to expand...
Click to collapse
<-- This
I was in the same situation, downgraded ROM and clockwork mod and did a restore and it works fine now
@Howling Wolf - I cannot get the CID for the SD card, because
in the 'adb shell' command, my command prompt says "error: device not found". But i want to know, can i still get the CID through another HTC desire phone ? and can i still update a stock rom with S-ON ? and how do i know if my phone is branded ?
I got my phone from Taiwan, a friend brought it over for me, and when i last checked it was on software version 1.37.921.1 .
@turbo_d - ill try that thnx
did you try installing the htc sync software then do adb devices
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Totoro_tw said:
ye i did, i installed HTC sync to get the HTC drivers, but from what i noticed is that your phone needs to be "running" instead of being stuck on the white HTC boot screen or even the hboot doesnt pick up the device aswell >.<
Click to expand...
Click to collapse
Try going into bootloader, and then run adb from pc..
@SAPPH1RE - i tried that but thanks for the help !
ok i acquired my CID through linux, but now its telling me
main version is older !
update fail.
any suggiestions ? my current software version of the phone is 1.37, which stock RUU should i be using ?
If you are on 1.37 you should be fine to continue with getting s-off and such. You don't need to upgrade or downgrade your ROM until you achieve s-off. And then you should upgrade to a custom ROM such as LeeDroid.
Sent from my Desire HD using XDA App
did you get it working ?
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Thing is, i cant get my phone to start up, so i need to flash a stock rom, so that i can get my phone started and then do S-OFF. But it keeps telling me "Main Version is older!"
ive tried 2 roms already, 1.32 and 1.72 RUU. What could be the problem ?
thnx problem solved, the gold card wasnt done properly, so i re did everything.
thnx for the help guys !
paulcoop007 said:
I fixed mine a few weeks back by doing a full wipe and then loading a fresh ROM
Click to expand...
Click to collapse
@paulcoop007 i have same problem with you, same version with your phone and S-ON. and my phone at black screen with htc. how can i fix it. can you explain how did you fix your phone?
Hi,
I have a serious problem and I could not fix it with anything I tried. Today I had the notification of the official 2.3 update for desire hd. I dowloaded it then the phone is stuck at the htc logo. I tried from bootloder to make factory reset recovery and also tried to flash some roms in fastboot mode.
None of them worked.
My first choice is to get back to 2.2 froyo, but I would like to hear recommendations about custom roms, especially if you have any rom advice wihch can increase battery life etc. I am not an expert in flashing roms however I can also consider for a custom rom in the light of your suggestions. Please help it would be much appreciated.
Regards...
is there anyone who as some comments??
Hello, that sounds rubbish Had you been running a custom ROM before? What network are you on?
got the same problem here too http://forum.xda-developers.com/showpost.php?p=14568001&postcount=12
thanks a lot but in this thread it says that it can not be downgraded if it is 2.37 or higher when i have tried to flash a rom i see that the it is currently 2.37.720.3.
Do you there might be also another way??
somebody please help, i am really stuck and can not find any solution, i started to think the phone will be brick. isnt there any suggestion...
and no one has tried the 2.36 RUU!? (stop trying the PD98IMG's off the SD)
i also tried to flash 2.36 up to 2.37 it also did not work....
hlfhs said:
i also tried to flash 2.36 up to 2.37 it also did not work....
Click to expand...
Click to collapse
Use the RUU and your pc to downgrade it to 2.36, it should work regardless of what you have on your phone.
first of all thanks for your comments.
let me tell you what i have done step by step.
ifound the rom below name specified.
RUU_Ace_Gingerbread_S_HTC_WWE_2.36.405.8_R_Radio_12.54.60.25_26.09.04.11_M2_release_187331_signed
i enter the bootlodaer because i can not get anywhere else. i plug in the usn then select "fastboot" and it show fastboot usb.
then i run the ruu from pc it starts to flash ( it shows current version 2.37.720.3 and will 2.36. etc. )
then black screen with white htc logo comes but nothing moves further and at the end i get the " Custome ID Error "
i do not know may be i am using the wrong rom if you can please provide another link to another rom or may be a different solution with a custom rom...
i am really stuck at this.
thanks in advance...
Customer ID error normally means you need a goldcard
www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/
Sent from my Desire HD using XDA Premium App
thanks for yor suggestion i will definetly try it and give results.
but please excuse my lack of knowledge, according to the instructions i have to use " gold card helper " via phone. my phone is now unusable. i have one android hd2 do you i can create the goldcard on hd2 according to the desire hd setting s and use it on desire hd????
thanks again...
i tried the godlcard solution but now it gave the error 140 bootloader version.
the only thing different than the steps it says chosee mmc2 value but on the goldcard helper i only saw mmc1 and i have sent the e-mail according to that...
what should i do?
does anyone has any suggestion??
since now the bootloader is pooched, you've pretty much bricked the device unless you can get your hands on the original ruu that your carrier uses.
Hello I started a thread like this in the wrong forum, but cant delete it. So I think this question can be ask here. I have s off a htc wildfire s before with no problems, I bought another one ( bricked the old one) and for some reason it wont work, i tried for hours step by step trying to figure out the problem. My phone is cdma VM runnig 2.3.4 gingerbread and 2.1 sense with 1.06 boot. The problem im having is the goldcard website that gives you a image file isnt working, it says the developers are on holiday it worked before? Next before I had the goldcard problem the 2 DIAG files seem to be corrupt, i downloaded them and try to open them in zip (to see whats in the files) and it says invalid. So I put the files in my sd card anyways and it trys to update and says sercurity error. please reboot...Hope someone can help thannks!
Hey ,
I have HTC Desire
When I turn on my phone I got this message Process Acore has stopped also Nothing work exapt botton
I instal some Officiel RUU but all of them didnt Work
Also I use PB99IMG.ZIP but the same problem
Could you please Help me
Thanks so much
YassineTad said:
Hey ,
I have HTC Desire
When I turn on my phone I got this message Process Acore has stopped also Nothing work exapt botton
I instal some Officiel RUU but all of them didnt Work
Also I use PB99IMG.ZIP but the same problem
Could you please Help me
Thanks so much
Click to expand...
Click to collapse
Help plz
Bortak's troubleshooting guide, stickied to the top of Q&A
You'll likely need to use the 2.3.3 RUU, you can also find it in PB99IMG.zip format from users here.
eddiehk6 said:
Bortak's troubleshooting guide, stickied to the top of Q&A
You'll likely need to use the 2.3.3 RUU, you can also find it in PB99IMG.zip format from users here.
Click to expand...
Click to collapse
That didnt Work bro still the same problem
You need to give more information: "that didn't work" or "all of them didn't work" isn't good enough to help us troubleshoot the problem....
- How are you trying to install the RUUs? Are you plugging them in and running them? Or using PB99IMG.zip method, does it find the zip file when booted into bootloader?
- Did the RUU fail to install? Did it come up with any error messages? If so could you tell us...
- Did the RUU install, can you boot into your phone and use it, but still getting the "process.acore has stopped" error?
Also it's useful to know your ultimate aim: are you going to sell the phone after RUU, or continue to use it?
Was your phone previously rooted? Do you want another ROM (obviously without the error). Why didn't you backup and try a different ROM? RUU tends to be last resort...
The more details you tell us, the more it becomes easier to help...
eddiehk6 said:
You need to give more information: "that didn't work" or "all of them didn't work" isn't good enough to help us troubleshoot the problem....
- How are you trying to install the RUUs? Are you plugging them in and running them? Or using PB99IMG.zip method, does it find the zip file when booted into bootloader?
- Did the RUU fail to install? Did it come up with any error messages? If so could you tell us...
- Did the RUU install, can you boot into your phone and use it, but still getting the "process.acore has stopped" error?
Also it's useful to know your ultimate aim: are you going to sell the phone after RUU, or continue to use it?
Was your phone previously rooted? Do you want another ROM (obviously without the error). Why didn't you backup and try a different ROM? RUU tends to be last resort...
The more details you tell us, the more it becomes easier to help...
Click to expand...
Click to collapse
Yeah Brother I use Ruu and succed instal and also the other zip file succed instal
And still the same problem
YassineTad said:
Yeah Brother I use Ruu and succed instal and also the other zip file succed instal
And still the same problem
Click to expand...
Click to collapse
Still not quite answering many of my questions..
So the 2.3.3 RUU successfully installed, did you restart the phone and does it get past the first screen?
Do you try to use the phone normally, but the Process.Acore error keeps constantly appearing?
eddiehk6 said:
Still not quite answering many of my questions..
So the 2.3.3 RUU successfully installed, did you restart the phone and does it get past the first screen?
Do you try to use the phone normally, but the Process.Acore error keeps constantly appearing?
Click to expand...
Click to collapse
Yeah successfully installed but didnt work still the same problem
I wanna change the wall system