Related
Was updating to FD26 phone died..... got back into odin mode with jig, plugged into comp now it says USB Device not recognized and cant odin any firmware and wont boot since it didnt finish the last firmware upgrade. Any suggestions?
Jaromewg said:
Was updating to FD26 phone died..... got back into odin mode with jig, plugged into comp now it says USB Device not recognized and cant odin any firmware and wont boot since it didnt finish the last firmware upgrade. Any suggestions?
Click to expand...
Click to collapse
I hate to say it but it sounds like it might be a brick.
Are you getting the flashing blue light with a blank screen when you try to boot our are you getting a boot loop? Are you able to boot into Recovery?
no it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. " i cant boot into recovery, i can into dl mode. ima try a different comp.
Jaromewg said:
no it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again. " i cant boot into recovery, i can into dl mode. ima try a different comp.
Click to expand...
Click to collapse
If you're getting that message I can tell you its not going to work. It sounds like you were trying to flash the international version kernel for the SGSII rather than the Epic 4G Touch. When you try to flash the international version it will fail and gives you the error you're getting. Another unfortunate side-effect is that it ruins your USB (due to differences in the way the USB works). I've heard that some JTAG services can fix it but I haven't done it myself.
At this point you unfortunately are stuck with a brick. :-(
Sorry!
I might have misunderstood the other posts but I thought flashing the international version completely disabled the USB port. Yet OP seems that device is being picked up in Windows but not successfully installed.
OP, can you please confirm? Check Device Manager and look for a device with a yellow exclamation point or triangle (if Win). If you can see it here you may just need to reinstall the Samsung drivers and get it installed that way. At the worst you're not any further along than you were before...
Alternatively you could try updating the driver manually, search C:\Program Files\SAMSUNG to see if it picks up.
If you haven't done so already, uninstall Kies and download the full Samsung driver suite from here:
http://org.downloadcenter.samsung.c...342248/Sprint_d710_USB_Driver_v1_3_2360_0.exe
Install the driver and maybe we can help you from there. Or if it works, there ya go.
I just went through this...what happened on my end:
-computer froze up while i was doing stock odin repack
-went to boot up phone and that messaged flashed
what i did:
-flashed stock el26 kernel(if you can't get into odin but pull the battery and keep trying..thats what i did)
-flash a rom like you normally would
PROFIT!
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
gica69 said:
Hi guys I just bought a SGH-I747 AT&T and the issue with it is it goes into Download mode just fine, works with Odin 3.7 loads a stock rom and then it sais reset but the phone doesn't reset just goes to black screen and then Odin sais Pass. I press the power button and Samsung appers and vibrates and goes back to black. When I try Recovery mode it show the blue writing on the left upper and the Samsung and then it goes to black screen. I put two different stock roms and same story. Kies won't recognize it and I installed recovery-clockwork-touch-6.0.4.3-d2att.tar to try to get into recovery mode and of course no luck. Don't know the history on this, so if anyone could help I would really appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I found out that the phone had 4.1.1 on it and the guy tried to flash 4.2.2 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
gica69 said:
I found out that the phone had 4.11 on it and the guy tried to flash 4.22 and upon doing the odin mode flashing odin gave Firmware upgrade encountered an issue Please select recovery mode in Kies & try again So these are just some helpful facts for anyone who has gone through it. Thanks in advance for any help
Click to expand...
Click to collapse
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3
PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Larry2999 said:
What firmware were you trying to flash via Odin and are you sure the seller didn't previously flash (or try to flash) the 4.3 on it? If it wasn't higher than 4.3, then you may try recovery via Kies as follows ....
Install and launch Samsung Kies on your PC (not Kies 3). Open the Tools menu and select Firmware Upgrade and Initialization
Do not connect your phone to your PC yet. Remove the battery cover and record device info written in the battery compartment
In Kies, enter your phone model (SGH-I747)
Enter the phone serial number and click OK to all the security questions. Follow all the instructions on Kies
Connect the phone when prompted and follow the rest of the instructions
Wait for firmware upgrade to complete
Good luck!
If this doesn't work, then you may try flashing the 4.1.1 stock image via Odin. Look for the correct stock image via the following thread ...
http://forum.xda-developers.com/showthread.php?t=1739426
The one you want for Samsung Galaxy S3 AT&T (4.1.1) is I747UCDLK3PLEASE don't try any of the above if you were already on the 4.3 bootloader as things will only get worse.
Click to expand...
Click to collapse
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
gica69 said:
I have already tried the I747UCDLK3 not from the link you gave me though. I did notice that the one you mentioned is a rooted stock do you think I should still do it? The rom flashes fine no errors in Odin but when it sais RESET the phone turns off the download mode and vibrates once then goes black then later Odin sais Pass but I cannot start it it just bootloops and vibrates and it stays that way As far as the Kies procedure you gave me don't I have to be in recovery mode for it to see the phone? I cannot get to that mode just download mode. Let me know thanks for your help
Click to expand...
Click to collapse
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Larry2999 said:
If you were successful in flashing via Odin, I would have suggested you try doing a hard wipe/reset in recovery. However, you said you can't get to recovery mode so this may not work. What happens when you try booting into recovery mode?
For Kies, you wouldn't have to be in recovery mode for the firmware restore to happen. Normally, you would have to connect your (powered-on) phone to your PC for it to be recognized by Kies. However, as you can't power on, we are forcing Kies to prepare the specific required firmware for your device by manually entering in the device information. Thus, when the phone is connected, you have firmware ready to make it work.
It may also be that the firmware you downloaded and flashed via Odin may not be the correct or full version. There are so many sources of "stock" firmware these days that one can never be too sure. You may go to Sammobile.com to download the stock firmware and compare the size of the extracted file to the one you used. The odin flashable tar.md5 file should be about 1.1Gb in size.
Click to expand...
Click to collapse
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
gica69 said:
When I go in recovery it shows blue writing in left upper corner and Samsung logo and then black screen. I think I did use the Sammobile firmware at 1.1. My clock in download mode shows 6. I don't think that would affect it though. Could it be that Odin doesn't really write the firmware that's why flashing doesn't change anything? I don't think the jig would do anything maybe sending it for a jtag reflash is the trick.
I am lost for now. If you guys can think of anything new let me know and thanks again.
Click to expand...
Click to collapse
You didn't mention if you tried the Kies option. I had a similar problem once when upgrade to 4.1.1 via Kies failed during the process and that was how I was able to recover. However, since you bought this from the secondary market, there is no way of telling for certain what the previous owner did wrong which would have been useful for recovery options.
One of the nice things about Odin is that you usually know the results immediately. If it says Pass, therefore, that's likely what it means. So Odin did flash something. But what did it flash? The counter you saw in download mode shows how many custom system installations there have been and 6 does show there has been some previous heavy tinkering with the phone. As you are still able to get into download modes, I would suggest you try flashing custom recovery (TWRP or CWM) via Odin. If this works and you are able to get into recovery mode, you may then try doing a hard wipe/reset via recovery. You may also try flashing the other (rooted) 4.1.1 file via Odin. At this stage, you really have nothing to lose in trying all options. I guess if you can get into recovery mode, the problem is almost solved as this leaves plenty of options.
A jig wouldn't help as that only gets you to download mode which, for now, you don't have a problem with. JTag should always be a last resort option only. Let me know how far it goes and good luck!
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
audit13 said:
When flashing in Odin, did you check auto reboot? If you did, try flashing again but uncheck auto-reboot. When you see Reset in the status windows, disconnect the USB cable, pull out the battery, wait a few seconds until the phone completely shuts down, put back in the battery, get into recovery, wipe cache, do a factory reset, and reboot.
Click to expand...
Click to collapse
This damn phone is starting to annoy me. I can still get into download mode but my phone gets usb device not recognized now. I have access to another I747 phone so my question is if I have access to the pit file from that phone can anything be done with the Debrick utility and a SD card with only download mode access? Thanks in advance.
Go into download and let us know what is shown on the screen.
audit13 said:
Go into download and let us know what is shown on the screen.
Click to expand...
Click to collapse
Odin Mode
Product Name: SGH-I747
Custom Binary Downloads: Yes (6 Counts)
Current Binary: Samsung Official
System Status: Official
Qualcomm Secure Boot: Enable
Green Android Icon Downloading...
Do not turn off target!!!
OK I plugged the USB in and out a few times and it allows to write every few tries. Back to my question can I do something in download mode if I have another i747 that I can copy stuff from? I also tried the suggestion to uncheck auto-reset pull the usb cable then the battery and try to go to recovery but it doesn't.Any suggestions are welcomed.
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
audit13 said:
Try flashing a stock 4.1.1 rom from sammobile using Odin. Do not check auto reboot. When you see reset in the status window, disconnect the usb cable, pull the battery, replace the battery, boot into recovery, and wipe. I have done this numerous times on my i747m after flashing custom ROMs.
Click to expand...
Click to collapse
I will try it again I think I already did but when I put the battery back and click the Vol+ Home Power I get the blue writing and then black screen. Should I wait like 10 min on the black screen or it should be quick. Thanks
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
audit13 said:
Keep holding the buttons until the blue writing disappears and the green android appears with the green progress bar.
Click to expand...
Click to collapse
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
If u can get it into download mode u are never ever hard bricked my friend...take it from a guy who had to dust off his old galaxy sll last weekend & still can't get into d/l mode on my s3 after a week & even with a jig lol
Sent from my SGH-T989 using xda app-developers app
gica69 said:
Is there an unbrick.img for 4.1.1 or 4.1.2 I noticed that there are files for 4.3 that allow you to go in recovery and erase stuff reinstall. Let me know cause I sure couldn't find it.
Click to expand...
Click to collapse
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Larry2999 said:
The unbricking image only helps you get into download mode from where you can work your way up the rest of the food chain. As you can already get into download mode without difficulties, I doubt if that's what you really need. You are also able to flash ROMs successfully in download mode via Odin so you've gone far up on the food chain already. Perhaps you are not doing the recovery thing correctly enough. Like Audit said, you need to continue holding down the Volume Up and Menu buttons whilst releasing the Power button after you see the first flash until the recovery menu appears and then do a hard wipe/reset.
Perhaps you could also try flashing TWRP via Odin if CWM isn't working.
Click to expand...
Click to collapse
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
gica69 said:
I already tried holding the Home and Volume up buttons for 4-5 minutes at which point my fingers got a bit tired. The reason I wanted the unbrick.img is that I am now having issues with the computer recognizing the device in usb. I plugged and unplugged so many times that it no longer works that way so I wanted to do it via sd card. The unbrick.img gets you in recovery mode and download mode as it allows you to boot from the card not from the internal HD. But the only ones I have seen are for the 4.3 issues. And I tried It but did not put my device in recovery.
Click to expand...
Click to collapse
I couldn't find one either although you may be able to create yours using the command line posted in the thread below ...
http://forum.xda-developers.com/showthread.php?t=2549068
You may also try using a jig to get back into download mode. Have you, however, considered exercising any buyer protection options you have on the phone since, it would appear, the guy sold you a lemon?
So this happened about a month ago. The battery drained and when I left it charging I noticed that it was vibrating and showing the grey battery icon and this loops. I have the CMR Recovery v6.0.4.7 and can only access it when connected to the wall charger. I have left it a while on CMR while connected to the wall to see if it need charging but it just does the same thing when trying to boot. I have wiped cache, dalvik cache and selected the "Fix root" option before rebooting and nothing. I have not tried to flash a ROM in fear of bricking it. I made it as far as the "Upgrading Apps" window before fully booting but it turned off. I searched a bit and some people blame a faulty USB Port and/or power switch. I have no problem in buying and replacing the USB port and the power switch, though I don't have soldering tools for the power switch. But since I don't know what the issue is exactly I haven't rushed to buy the USB port replacement. So, the question is: is it a software or hardware problem and can it be fixed? I hope this is a software issue so it can be easier to solve.
I suggest putting the phone into download mode and see if Odin recognises the phone. If it does, I would flash the latest stock rom.
audit13 said:
I suggest putting the phone into download mode and see if Odin recognises the phone. If it does, I would flash the latest stock rom.
Click to expand...
Click to collapse
Odin does recognize the phone on Download Mode. So, what you are saying is to flash the latest non-rooted ROM (OFW), correct? Like the tar files found in sites like SamMobile? That won't remove my root nor custom recovery, right? Kinda of a newb question even though I kinda know the answer, but I just want to make sure.
Flashing a stock ROM will always remove root and twrp.
audit13 said:
Flashing a stock ROM will always remove root and twrp.
Click to expand...
Click to collapse
Hi. So, I flashed the latest stock ROM that is available on SamMobile and it fails in Odin. Now when I plug the phone without going to Download Mode its says something about recovery mode in Kies and and a firmware upgrade issue. What is happening? Thank for your responses, btw.
What I downloaded was a zip titled "SGH-M919-TMB-M919UVUAMDL-1366964131" and inside is and tar.md5 file called "M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME.tar". There on the same folder as Odin.
What error message was displayed in the Odin log?
Post the entire Odin log if possible. This will help to determine the issue.
You confirmed that the phone is an sgh-m919 in download mode?
Even though you turn on the phone and see the message"...firmware upgrade encountered an error...", Odin can still be usedto flash a stock ROM as if the phone was in download mode.
The MDL firmware is too old. Try flashing the latest ROM.
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Blaccko said:
Hi,
I was running LineageOS on my Galaxy Tab S tablet (SM-T800). I tried to update LineageOS. I went into the settings and downloaded the lastest version. However, the installation didn't go through. The download was successful, but an error message told me to try and manually install the update. I tried to go into TWRP mode to install manually the update. Instead of going in the recovery mode, I saw a TWRP app on the Google Play store. I tried and install that app. It went ok, however, I needed to reboot my tablet to finish. I did so, but after that, I got stuck in booting mode, between the TWRP logo and the Samsung logo. So the tablet was trying to boot in TWRP mode, but after about 5 seconds on the splash screen of TWRP, the spalsh screen disapear and then the tablet tries to boot in normal mode. It doesn't work, and the tablet reboots in TWRP mode, but, again, unsuccessful. It's a loop, alterning between the two splash screens.
I tryed to go into download mode and flashed the stock ROM (found on Updato) while using Odin on my computer. It worked. However, after the process, my tablet got stucked on the Samsung logo only. Now, it doesn't go in recovery mode (TWRP). I can only go in download mode or regular mode (but not working). Only the download mode works.
I don't really know waht to do. I tryed to redo the process with Odin and the custon ROM, but it didn't work better.
What can I do?
Thank you very much for your help!
Click to expand...
Click to collapse
Have you tried to reflash twrp via odin ? If that works go into twrp reformat your partitions, then flash a custom rom.
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Blaccko said:
Hi,
Thanks for your answer. I tried to reinstall TWRP with Odin on my computer. The process went well, but the reboot of my tablet that occurs at the end of the process got stuck again on the Samsung logo. It didn't get to TWRP mode. I tried to go manually into recovery mode by holding power+vol up+home, but it didn't work.
What else can I try? Thank you,
Click to expand...
Click to collapse
Are you trying to get to twrp from powered off state ? If not , get to power off state, then use key combo again to try to get into twrp.
Also when you flash twrp, in odi , there is a setting to prevent auto reboot, use that and try to get to twrp via key combo from download. Mode., finally tripple chech the key combo you are using is correct
Hi,
Thanks for the help. I tried to get to TWRP from power off state. The TWRP splash screen appears, and stays on for about 5-10 sec. After that, the splash screen disappear and the tablet reboot to get stuck on the Samsung logo again. It's like if the TWRP booting process doesn't go through...
Thanks again for your help,
Ouch !!
Looks like you got a real problem , and getting into territory I'm not expert in, Ashyx is the real authority with twrp for this device, you can try to pm him and hope he takes pity on you ( he has been helping guys on this qa thread tirelessly for over a year, and is prob taking a well deserved break ).
Otherwise a few more suggestions,
Maybe your PIT is messed up , ( but you prob would not make it to twrp splash screen in that case )
Twrp may still be trying to execute the script from the original linage update and not finding something bails ( total guess ).
Try flashing a stock ( downloaded from sammobile or somwhere you trust ) rom via odin, and see if you can get into the stock recovery. From there do a factory reset and see if you can get stock running.
Try getting into twrp with device connected to pc ( helped in some wierd cases, you never know lol ).
When TWRP splash screen comes up, try some key combos , maybe twrp checks for a script abbort key combo ?
Checkout the TWRP github issues page, see if your bug is there and a solution, create a bug report or mail a dev directly.
Have a look at the TWRP code, maybe some clues ??
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Blaccko said:
Hi,
So not much development here...
I tried to download the stock ROM for my device from Sammobile and tried flashing it with Odin (JOdin actually, I'm on Mac), but it says it need a PIT file. I let Casual fin the PIT file and it finds it. Only, after that my device does not reconnect to Odin even though it's still plugged in my computer. I tried to unplug it then plug it back, but then Odin says the PIT file is corrupted. I tried to restart my device, but still not connecting to Odin...
I tried getting into TWRP with my device connected to my computer. Still the same problem of rebooting while TWRP is booting (while it's on splash page).
No combo key seems to work to keep TWRP open and loading...
Didn't find anything on TWRP github and I'm not saavy enough to look into TWRP code.
So, I'm still stuck with my initial problem. Do any of ou have some advices/suggestions or can help me with my problem please? At this point, I've been without my tablet for more than a month and it S**KS!!
Thanks in advance everyone,
Click to expand...
Click to collapse
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Hi, thanks a lot for your time.
I will try that at work tomorrow as I don't have Windows at home. However, I did try to flash stock ROM with Windows initially (see first post for more info) and it didn't solve my problem. I wasn't able to access recovery mode after the stock ROM was flashed. Hope it's gonna work now and I'll be able to factory reset.
I'll let you know tomorrow afternoon.
Thanks,
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
WOW!!! Thank you so much Ashyx. I can now finally use my Tab S. I'm so grateful!!! Thousand time thank you! I deeply appreciate your help for resolving my problem.
ashyx said:
Use ODIN via Windows or a VM on your Mac.
Flash stock firmware then boot to recovery and factory reset.
Reboot and wait ten minutes.
Click to expand...
Click to collapse
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you very much for you help.
dr.rokr said:
Hi! I hope some one knows how to restore apk on a Galaxy S9 plus
I was trying to get rid of Bixby and erase some apks using adb app control, I have a backup of the apks in the computer, the problem right now it's that the phone has many photos and most of them are important , I would like to know if there is a way to avoid wipe data/ factory reset, via adb or Odin.
I'm stuck on loop after the operator logo.
It doesn't boot in safe mode.
I already have android 10 ROM but I'm afraid that if I flash it with Odin , it will wipe the user data, if there is way to Just update, or restore this files please let me know.
Thank you
Click to expand...
Click to collapse
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tried the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
dr.rokr said:
Hi! I have tried several times, and I get failure to start, the phone is detected but the flash doesn't initiate, sometimes I get this screen, sometimes it says fail .
I have installed Samsung USB drivers, from the
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
And Odin from here
Patched Odin 3.13.1
For those looking for a modified, modded, or patched odin that is a newer build than all the fake and renamed prince comsy 3.12.3 versions floating around. I patch recent Odin versions to offer similar functionality to the princecomsy; in that...
forum.xda-developers.com
I used the original Samsung USB cable and tryed the 3 USB ports in the laptop
What else can be happening?
Thank you very much!
Click to expand...
Click to collapse
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
bruno2030 said:
did you try booting into the download mode twice?
Once and then again and then start the odin.
I had to do that.
I had to flash the official firmware myself because my phone keeps crashing on the homescreen.
Didnt solve it but I did flash it properly.
Click to expand...
Click to collapse
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
go to the recovery.
connect to the PC.
open odin.
click on "reboot to bootloader"
It should go to to download mode.
what does your download mode screen say?
When I was doing this process I tried reflashing the latest rom but that didn't solve my boot loop issue.
So I flashed an older version of the rom.
Make sure the version you download is compatible with your phone.
You have G9650ZHU9FUG2 so only roms with 9 will work.
I flashed that old version and it didn't work, phone still stuck.
Then I flashed the latest one again and then my phone worked.
I used odin from the link you posted.
Odin3 v3.13.1
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
dr.rokr said:
Hi! Yes I have tried but the phone seems unresponsive in download mode, I have tried with all the Odin versions , and 2 USB cablesi
I don't know what else can I do
Click to expand...
Click to collapse
TormentedHeart said:
actually what i would suggest is downloading/re-downloading samsung usb drivers. otherwise most phones won't respond to odin even in download mode without it
Click to expand...
Click to collapse
Hi! I have uninstalled everything and then install the drivers again without luck
TormentedHeart said:
put phone in recovery mode. flash official firmware using odin. use The BL,AP,CP files and for the CSC use the one marked HOME.
Click to expand...
Click to collapse
Hi! Today I have successfully flashed the exact firmware that the phone had ( there is no newer) using a different laptop (it's true if the problem persist with Odin, use another laptop)
I got success message, at the very first time, and when the phone reboot, nothing , stuck as it was before, so I erased cache partition and no luck, still stuck on reboot, I have also tried repair apps , and reboot sistem now, what else should I do?
Thank you very much!
Hi! I want the community to know that using the APK adb app for Samsung it's a bad idea, after successfuly flashing the firmware and performing a factory reset several times the phone remain stucked, I downloaded about 10 different firmwares and flash them all times without an error, and the phone was bricked and stuck in boot. So I took it to the official service and nothing, still the same, then I found an external service that flash the device with a little box that they said they paid in advance for credits for using that box, it took them one full week to revive the phone, also they had to flash it several times. In conclusion, if you buy Samsung, stick with the garbage apps the throw, if you mess with the system in some way as the official technician said, the phone will be nearly unrecoverable for privacy benefits for the user. Thank you very much for the help to the community!