Related
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
HuaweiG510 said:
My Huawei G510 is stuck at logo after rooting device. It is not unlocked from Huawei. What to do. Tried several things unable to load.
Click to expand...
Click to collapse
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Thanks dear. It worked.
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
HuaweiG510 said:
Thanks dear. It worked.
Click to expand...
Click to collapse
If that worked U can press thanks :good: button
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
poirot13 said:
Hi, I have the same problem and I followed your instructions but while the new firmware is installing from the sd card, the phone shut down.
It seems like it has no sufficient power to finish the operation. In fact I tried to plug the phone to charge the battery and that don't work...at least the led is not on (but I'm pretty sure it's not charging).
After that the only things I can do is to power on again and see the boot loop.
Any idea on how to solve?
Thanks.
Click to expand...
Click to collapse
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
poirot13 said:
Shutdown. Then if I press the power button or simply I plug the phone to charge the battery, start again to bootloop.
Can you please tell me how to do?
Click to expand...
Click to collapse
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
S34Qu4K3 said:
My problem was that when into the original recovery, after a few seconds, phone reboots and back up to kernel logo
The full command for flash is: fastboot flash recovery recovery_original_flashable.img
Info:
http://forum.xda-developers.com/showthread.php?t=2131284
http://androidforums.com/desire-all...boot-windows-updated-1st-june-2011-a.html#”8”
Click to expand...
Click to collapse
It happens the same to me, but I don't know how to do.
I'm a newbie and I'm not familiar with this command...could you kindly explain what I have to do step by step?
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
It works!!! You are simply a genius!
Thanks a lot. :laugh:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
hey man, ur posts in this thread were a real big help for me, i accidently wiped my stock recovey (dont ask ) and got stuck at the boot logo with nothing working at all and ofcourse froce updating wont work in apsence of recovery (put update.app on sdcard/dload bla bla)
so i downloaded the stock recovery you posted and flashed it via adb after i got my pc to see my device with ur combination back in post #10 (hold power and vol - buttons while plugged to pc) and everything went great
thanks for your help man, really can't thank u enough, thought my device was hardbricked
Mine doesnot work
hannanzikrea said:
I think you should download firmware for your mobile and flash it.Put the firmware in sdcard/dload/update.app.Now press insert sd card and press vol+ vol- and power button.
Install firmware and also go to recovery mode and wipe cache :highfive:
Hope this works !!
Click to expand...
Click to collapse
I am using Huawei G 510-0200 in Pakistan. I had rooted my cell phone and was converting a user app into system app via Titanium backup. The process was taking long time so force closed Titanium Backup app. This caused phone crash and it restarted and hung up at huawei logo.
Now i tried factory data reset and clearing cache in Power and Volume + key mode. It did not work. I tried applying update (two different roms, one custom pakistani rom and other was normal g510-0200 rom) in the same mode but it shows installation aborted.
I tried Forced Firmware Update mode too. I placed update.app file in the sd card and restarted cell phone by holding Volume+, Volume- and Power key. In that mode, it shows unpacking Step 1/2 for a while and then instead of installing, it shows Update Failed.
Error log shows this:
filename = /mmc1/dload/update.app call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST CMD=0xf,moduleaddr = 0xd2000000, len_tmp=0x4000
I have tried everywhere and I'll be really greatful if you can sort this out for me. :crying:
hi
S34Qu4K3 said:
Shutdown or reboots? The op said that was a G510 and this is the P6 forum
Probably you have the recovery corrupted, you need to reflash stock recovery again via fastboot
THIS IS FOR THE Ascend P6, NOT for the G510
Click to expand...
Click to collapse
Good bless you. It worked also for me. Thank you very muck , thank you thank you.
No luck.
S34Qu4K3 said:
I posted you fastboot noob-friendly tutorials
1st you need fastboot installed and P6 and fastboot drivers
Asumming you already have downloader the image and you are in windows, open a cmd promp and navigate (using cd command) to your fastboot directory, place recovery_original_flashable.img in this folder. If your phone is shutdown, hold vol- and plug the usb cable (if it's continuous rebooting, hold vol- and power button until phone reboots and kernel logo come up)
Type on the cmd promt: fastboot devices , if you see under devices attached, ??????????? or numbers and letters, your phone is connected into fastboot mode
If you don't have this, check if the drivers was correctly installed.
With the phone connected in fastboot mode, type in the cmd promt: fastboot flash recovery recovery_original_flashable.img
After this command finish, type fastboot reboot and enter into the default recovery and try to update the system
I not guarantee the exit of this operation, this solved my problem, but maybe yours not. If you aren't sure, ask here or send phone to your repair center
Click to expand...
Click to collapse
when entered the command for original recovery its says 'error:cannot load recovery_original_flashable.img'
S34Qu4K3 said:
Glad to help
Sent from my HUAWEI P6-U06 using xda app-developers app
Click to expand...
Click to collapse
Hello !!
Model Huwaei : Asceud G510 -- G510-0200
Problem : Stuck On Logo Flash Done
I Have Same Handset-Stuck On Huwaei Logo ! Already Flashed !!
With
HUAWEI-Ascend-G510-firmware（G510-0200,Android_4.1,Emotion_UI,V100R001C00B173,Normal,05011EUC）
Above File But Same Frimware Update Done !! But Sam Stuck On Huwaei Or Restart
Any Guidence- @ ?
please my p6 is stucked at bootloop and when i go to recovery it says unable to mount cache,plz any help
So, I was using my Nexus during my class today and it was working great.
After class, I walked to my next class with the tablet in my hand, I did not drop it or anything, when I got to my next class the lock screen was unresponsive.
I was still able to take a screen shot, so the tablet wasn't frozen, but the touch screen was not working at all. All of the hardware buttons worked fine.
I let it sit for about 2 hours and the problem persisted.
I just did a soft reset, holding the power button down for 10 seconds, and it shutdown and rebooted, but its now stuck on the Google screen.
Anyone know what is wrong or how I can fix it?
Thank you
See this thread: http://forum.xda-developers.com/showthread.php?t=2381582
krazzyjman said:
So, I was using my Nexus during my class today and it was working great.
After class, I walked to my next class with the tablet in my hand, I did not drop it or anything, when I got to my next class the lock screen was unresponsive.
I was still able to take a screen shot, so the tablet wasn't frozen, but the touch screen was not working at all. All of the hardware buttons worked fine.
I let it sit for about 2 hours and the problem persisted.
I just did a soft reset, holding the power button down for 10 seconds, and it shutdown and rebooted, but its now stuck on the Google screen.
Anyone know what is wrong or how I can fix it?
Thank you
Click to expand...
Click to collapse
Return it.
You have a defective unit.
[email protected] said:
Return it.
You have a defective unit.
Click to expand...
Click to collapse
Another one of many. ASUS quality control FTW.
anjelika said:
See this thread: http://forum.xda-developers.com/showthread.php?t=2381582
Click to expand...
Click to collapse
This thread doesn't work for me since my nexus is in a bricked like state
hard reset ?
hard reset always works for me. 20 seconds
krazzyjman said:
This thread doesn't work for me since my nexus is in a bricked like state
Click to expand...
Click to collapse
Have you tried entering bootloader?
[Info] Guide to entering safe mode, bootloader, stock recovery
I really doubt you are in bricked mode or it wouldn't even show google. If it is stuck on google it is having trouble loading the OS.
Most likely you can go into fastboot mode and just flash your /system and it will begin working again with no loss of data.
sfhub said:
Have you tried entering bootloader?
[Info] Guide to entering safe mode, bootloader, stock recovery
I really doubt you are in bricked mode or it wouldn't even show google. If it is stuck on google it is having trouble loading the OS.
Most likely you can go into fastboot mode and just flash your /system and it will begin working again with no loss of data.
Click to expand...
Click to collapse
My problem is I can't turn the tablet off. When I hold the power button it just restarts.
Also I tried the hard reset and it does nothing. Just stays on the Google screen
Is your device rooted? If not that is just rediculous on asus's part
slamdunksaliby said:
Is your device rooted? If not that is just rediculous on asus's part
Click to expand...
Click to collapse
My device is not rooted at all.
I've had it for 2 days.
I have to say, I am very disappointed in all of these issues.
I would return it..I'm sorry to hear that I have had troubles myself with two devices so far
krazzyjman said:
My problem is I can't turn the tablet off. When I hold the power button it just restarts.
Also I tried the hard reset and it does nothing. Just stays on the Google screen
Click to expand...
Click to collapse
Did you specifically try to get into bootloader mode using the post I mentioned.
You need to Press Power+VolDown continuously until the bootloader menu comes up?
The fact that you are getting to the Google screen at all means your bootloader is still working so I find it hard to understand why you wouldn't be able to get into bootloader mode.
sfhub said:
Did you specifically try to get into bootloader mode using the post I mentioned.
You need to Press Power+VolDown continuously until the bootloader menu comes up?
The fact that you are getting to the Google screen at all means your bootloader is still working so I find it hard to understand why you wouldn't be able to get into bootloader mode.
Click to expand...
Click to collapse
It was not working, but my tablet just died and I was able to charge and get into the bootloader.
Now to see if it will work.
sfhub said:
Did you specifically try to get into bootloader mode using the post I mentioned.
You need to Press Power+VolDown continuously until the bootloader menu comes up?
The fact that you are getting to the Google screen at all means your bootloader is still working so I find it hard to understand why you wouldn't be able to get into bootloader mode.
Click to expand...
Click to collapse
What do I do once into the bootloader mode?
Start, restart bootloader, or recovery?
krazzyjman said:
What do I do once into the bootloader mode?
Start, restart bootloader, or recovery?
Click to expand...
Click to collapse
Well since you are getting stuck on Google, that means your ROM (/system) is not loading.
I would flash boot.img and system.img from the factory restore.
http://developers.google.com/android/nexus/images#razor
The restore is in .tar.gz format and within the tar there is a zip file. Within that zip file is boot.img and system.img. You need to extract those (ungzip, then untar, then unzip) and place them in your adb directory.
Boot your tablet into bootloader mode, connect the USB cable, make sure it is recognized as android bootloader interface.
Type
fastboot flash boot boot.img
fastboot flash system system.img
assuming no errors
fastboot reboot
If on the reboot you still get stuck, push and hold Power for 30-60 seconds and try again.
Fails a second time, something more serious is probably wrong.
If you get stuck on X instead of Google, that means something may be wrong with your user data. Try the 60 second reboot thing again. If it is still stuck on X, boot into recovery and do a wipe data factory reset. See previous post for how to get into recovery.
sfhub said:
Well since you are getting stuck on Google, that means your ROM (/system) is not loading.
I would flash boot.img and system.img from the factory restore.
http://developers.google.com/android/nexus/images#razor
The restore is in .tar.gz format and within the tar there is a zip file. Within that zip file is boot.img and system.img. You need to extract those (ungzip, then untar, then unzip) and place them in your adb directory.
Boot your tablet into bootloader mode, connect the USB cable, make sure it is recognized as android bootloader interface.
Type
fastboot flash boot boot.img
fastboot flash system system.img
assuming no errors
fastboot reboot
If on the reboot you still get stuck, push and hold Power for 30-60 seconds and try again.
Fails a second time, something more serious is probably wrong.
If you get stuck on X instead of Google, that means something may be wrong with your user data. Try the 60 second reboot thing again. If it is still stuck on X, boot into recovery and do a wipe data factory reset. See previous post for how to get into recovery.
Click to expand...
Click to collapse
Where am I typing in those lines?
And all the files I need are in the download link?
sfhub said:
Well since you are getting stuck on Google, that means your ROM (/system) is not loading.
I would flash boot.img and system.img from the factory restore.
http://developers.google.com/android/nexus/images#razor
The restore is in .tar.gz format and within the tar there is a zip file. Within that zip file is boot.img and system.img. You need to extract those (ungzip, then untar, then unzip) and place them in your adb directory.
Boot your tablet into bootloader mode, connect the USB cable, make sure it is recognized as android bootloader interface.
Type
fastboot flash boot boot.img
fastboot flash system system.img
assuming no errors
fastboot reboot
If on the reboot you still get stuck, push and hold Power for 30-60 seconds and try again.
Fails a second time, something more serious is probably wrong.
If you get stuck on X instead of Google, that means something may be wrong with your user data. Try the 60 second reboot thing again. If it is still stuck on X, boot into recovery and do a wipe data factory reset. See previous post for how to get into recovery.
Click to expand...
Click to collapse
I figured out where to type, but I have to unlock my bootloader?
I have no way to enable usb debugging since I cant tun on the device, right?
krazzyjman said:
I have no way to enable usb debugging since I cant tun on the device, right?
Click to expand...
Click to collapse
You don't need to enable USB debugging for fastboot mode.
You just need to press Power+VolDown until you get into the bootloader. That is fastboot mode. It will install Android Bootloader Interface (usb debugging does android debug bridge interface)
I actually didn't realize you weren't unlocked. If that is the case, the unlock process will erase your userdata, so you might as well just do the full factory restore.
First goto bootloader mode using Power+VolDown and connect USB, type
fastboot oem unlock
You'll see a question on the tablet screen, Press VolUp to go to yes and Power to select.
On the command prompt in windows, you should see it erase userdata and cache.
On the bootloader screen it should have "Start" highlighted (if not, use VolDown to cycle until you see "Start"). Press Power to accept. You should see Google, then it'll go into recovery and format userdata and cache. It'll then try to boot and since /system is having issues, you'll be stuck in Google again.
Go back into bootloader mode, hold Power+VolDown for a while until you see the bootloader screen.
Now grab the factory image as above, gunzip, untar, and you should have a folder razor-jss15j
Copy these files from your adb directory to the razor-jss15j directory
adb.exe
fastboot.exe
AdbWinApi.dll
AdbWinUsbApi.dll
In command prompt in the razor-jss15j directory, type
flash-all
It should output a bunch of stuff, essentially writing a factory image to your tablet.
When it is done, it'll reboot and hopefully you'll get the initial setup window.
I wrote this up from memory, so hopefully I didn't forget stuff. If something doesn't seem right just ask.
Thanks for all of your help.
It really means a lot you took the time to help me.
I'm going to Best Buy today and I am going to see if I can do an exchange.
If not, I will try this later.
Again, thank you
So before I get linked to a bunch of solutions, here's what I've tried so far as I do have fastboot access:
I've tried flashing the latest factory image from Google. Both manually from fastboot and with NRT, all to no avail. It shows the Google logo then reboots repeatedly. I've tried entering recovery to factory reset there after flashing, but the device won't get into recovery.
I've also tried this method, but I can't get the device to enter download mode. It shows that it's entering it for a moment when I plug it into my computer while holding volume up, but then reboots into the bootloop again.
There's one weird thing that should be noted that makes me think this is some weird software issue, and not a hardware failure. I let the device bootloop all night last night until the battery died. When I powered it on this morning it went all the way to the Android setup page where you select wifi, etc and go from there. However, when I plugged it in and kept going through setup, it rebooted and has been looping since. I've contacted Google and they're supposed to conference call me with LG to see what we can do. Do I have any options other than that? Thanks for any help.
From bootloader
fastboot erase cache
fastboot format cache
fastboot erase user
fastboot format user
BTW what exactly is happening when you say it doesn't enter recovery?
addisontodd said:
So before I get linked to a bunch of solutions, here's what I've tried so far as I do have fastboot access:
I've tried flashing the latest factory image from Google. Both manually from fastboot and with NRT, all to no avail. It shows the Google logo then reboots repeatedly. I've tried entering recovery to factory reset there after flashing, but the device won't get into recovery.
I've also tried this method, but I can't get the device to enter download mode. It shows that it's entering it for a moment when I plug it into my computer while holding volume up, but then reboots into the bootloop again.
There's one weird thing that should be noted that makes me think this is some weird software issue, and not a hardware failure. I let the device bootloop all night last night until the battery died. When I powered it on this morning it went all the way to the Android setup page where you select wifi, etc and go from there. However, when I plugged it in and kept going through setup, it rebooted and has been looping since. I've contacted Google and they're supposed to conference call me with LG to see what we can do. Do I have any options other than that? Thanks for any help.
Click to expand...
Click to collapse
it's seems like me , it's been a month i can't boot it up .
sfhub said:
From bootloader
fastboot erase cache
fastboot format cache
fastboot erase user
fastboot format user
BTW what exactly is happening when you say it doesn't enter recovery?
Click to expand...
Click to collapse
I choose reboot recovery from the fastboot menu and it just boot loops. It won't enter recovery.
addisontodd said:
I choose reboot recovery from the fastboot menu and it just boot loops. It won't enter recovery.
Click to expand...
Click to collapse
what if you try
fastboot boot twrp.img
I've bootlooped so many times I don't know where to start.
So you flashed the factory IMG from your bootloader correct.
Fastboot -w will wipe without wiping system.
Then reflash your whole system. I would redownload from the Google site through Skipsoft...the easiest way. When it asks to keep or flash new recovery you want to flash the stock recovery.
http://forum.xda-developers.com/nex...olkit-skipsoft-android-toolkit-nexus-t3230444
You'll have to reroot afterwards which you can also do through skipsoft.
Profit... Thank me if I helped.
It's a Hardware issue. Installing system again will not fix it. Send it to LG for a repair. My phone had the same issue.
phone is dead
when plug in for charging it shows charging logo then restart and restart again. loop
second when i try to go in recovery , again it restart never go to recovery.
i can only access fastboot option.
i never try to root or unlock bootloader.
my phone is locked.
arixeon said:
phone is dead
when plug in for charging it shows charging logo then restart and restart again. loop
second when i try to go in recovery , again it restart never go to recovery.
i can only access fastboot option.
i never try to root or unlock bootloader.
my phone is locked.
Click to expand...
Click to collapse
i had the same problem please some one answer
arixeon said:
phone is dead
when plug in for charging it shows charging logo then restart and restart again. loop
second when i try to go in recovery , again it restart never go to recovery.
i can only access fastboot option.
i never try to root or unlock bootloader.
my phone is locked.
Click to expand...
Click to collapse
1. What phone model? What version of firmware 5.0.2 or 6.0.1?
Yes, same this with me. 6.0. I tried reset, but reset is not working. So I unlocked device , installed twrp, but twrp sometimes starts and only for few seconds. Mostly phone is either stuck in logo, or just shuts down after boot vibration. No luck in recovery. My phone crashed suddenly and got into this situation.
gSingh05 said:
Yes, same this with me. 6.0. I tried reset, but reset is not working. So I unlocked device , installed twrp, but twrp sometimes starts and only for few seconds. Mostly phone is either stuck in logo, or just shuts down after boot vibration. No luck in recovery. My phone crashed suddenly and got into this situation.
Click to expand...
Click to collapse
you unlocked your device after it was dead or before
because mine 820 is locked and i cant do anything
arixeon said:
you unlocked your device after it was dead or before
because mine 820 is locked and i cant do anything
Click to expand...
Click to collapse
After it was dead. I got into fastboot. And from linux , using tutorial from HTC unlocked the device.
gSingh05 said:
After it was dead. I got into fastboot. And from linux , using tutorial from HTC unlocked the device.
Click to expand...
Click to collapse
please share the link or method to unlock bootloader while phone is dead. in current situation im unable to write or update the firmware .
arixeon said:
please share the link or method to unlock bootloader while phone is dead. in current situation im unable to write or update the firmware .
Click to expand...
Click to collapse
http://www.htcdev.com/bootloader
You have to register.
For Windows: Install HTC drivers, HTC Sync Manager(optional), fastboot, adb.
For linux: Install android-tools
Put phone into Hboot -> Fastboot.
Connect to PC and from cmd/terminal you have to execute commands as told by HTC site.
> fastboot oem get_identifier_token
This will give you a string , copy paste from '<<Identifier Token start>>' to '<<Token End>>' , only this column, no prefix.
Paste this into website. There will be text box while following steps.
You will get a file in email attachment. It will be something like this 'Unlock_code.bin'
And also the link to further steps will be provided.
> fastboot flash unlocktoken Unlock_code.bin
You will get option on phone screen. 'Yes' 'No'. Use volume button and select Yes.
and its done.
It hardly takes a minute
gSingh05 said:
http://www.htcdev.com/bootloader
You have to register.
For Windows: Install HTC drivers, HTC Sync Manager(optional), fastboot, adb.
For linux: Install android-tools
Put phone into Hboot -> Fastboot.
Connect to PC and from cmd/terminal you have to execute commands as told by HTC site.
> fastboot oem get_identifier_token
This will give you a string , copy paste from '<<Identifier Token start>>' to '<<Token End>>' , only this column, no prefix.
Paste this into website. There will be text box while following steps.
You will get a file in email attachment. It will be something like this 'Unlock_code.bin'
And also the link to further steps will be provided.
> fastboot flash unlocktoken Unlock_code.bin
You will get option on phone screen. 'Yes' 'No'. Use volume button and select Yes.
and its done.
It hardly takes a minute
Click to expand...
Click to collapse
thanks
now i unlocked the bootloader abd installed recovery but unable to enter in the recovery.. it shows that entering recovery and then restart loop .
arixeon said:
thanks
now i unlocked the bootloader abd installed recovery but unable to enter in the recovery.. it shows that entering recovery and then restart loop .
Click to expand...
Click to collapse
Yes it happens sometimes.
Make sure the recovery step was complete. For win: The .exe cmd should exit on clicking enter or automatic, till then don't remove the phone.
Try some combinations:
- turn phone OFF from Hboot then start recovery
- if screen shows 'entering recovery' let it be , wait for reboot or shutdown
- try alternative options of 'reset' and 'recovery' both will get you to twrp
- remove sdcard then try
- check charging
- don't try if overheating, let the phone be in normal temperature.
I had similar problem, but trying combos started twrp.
The mistake I did was to wipe everything. Don't do that, try to wipe cache, the first default option provided by twrp and start phone. (no sdcard/sim)
I was able to install Tomal's Discovery ROM but after some time phone again rebooted and stuck in loop.
For any restore/flash use internal memory. SDcard failed to work for me ( i tried many different sdcards).
My Moto Play G6 (XT1922-2) wouldn't turn on despite being fully charged.
I could originally boot it into Fast Boot mode but selecting any options past that such as Recovery Mode would crash the phone (the LED would flash white intermittently)
I used Lenovo Smart Assist to Rescue the devise back to factory settings through Fast Boot but now the phone still won't switch on and will only boot into Fast Boot mode when plugged into a PC.
Any ideas how to recover the phone now? It has never been rooted before, simply factory settings.
Thanks in advance.
Cozens915 said:
My Moto Play G6 (XT1922-2) wouldn't turn on despite being fully charged.
I could originally boot it into Fast Boot mode but selecting any options past that such as Recovery Mode would crash the phone (the LED would flash white intermittently)
I used Lenovo Smart Assist to Rescue the devise back to factory settings through Fast Boot but now the phone still won't switch on and will only boot into Fast Boot mode when plugged into a PC.
Any ideas how to recover the phone now? It has never been rooted before, simply factory settings.
Thanks in advance.
Click to expand...
Click to collapse
Boot into fastboot, plug it into your PC and open up adb. Enter each of these commands.
fastboot oem fb_mode_set
fastboot erase userdata
fastboot erase cache
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Let it sit for a minute. It should encrypt and boot normally.
If this doesn't work, it should send you back to fastboot. If that happens, then fastboot should say what the problem is. If the error is not on the default fastboot screen, use the volume key and switch to logs, then hit power and tell me what it says. If neither of those things happen, let me know and we'll go from there.
Spaceminer said:
Boot into fastboot, plug it into your PC and open up adb. Enter each of these commands.
fastboot oem fb_mode_set
fastboot erase userdata
fastboot erase cache
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Let it sit for a minute. It should encrypt and boot normally.
If this doesn't work, it should send you back to fastboot. If that happens, then fastboot should say what the problem is. If the error is not on the default fastboot screen, use the volume key and switch to logs, then hit power and tell me what it says. If neither of those things happen, let me know and we'll go from there.
Click to expand...
Click to collapse
Sorry for the late response, everything got a bit chaotic.
All the commands worked and reboot switched the phone off but it did not boot back up. The LED just flashes white consistently.
I'm coming to the conclusion that it may be a hardware issue, would you agree?
Thanks again for the reply!
Cozens915 said:
Sorry for the late response, everything got a bit chaotic.
All the commands worked and reboot switched the phone off but it did not boot back up. The LED just flashes white consistently.
I'm coming to the conclusion that it may be a hardware issue, would you agree?
Thanks again for the reply!
Click to expand...
Click to collapse
I agree. I think you had a hardware failure of some kind.