Related
Please help
I can't seem to get my Jasjar flashed. I dont know what I'm doing wrong.
Piesang said:
Please help
I can't seem to get my Jasjar flashed. I dont know what I'm doing wrong.
Click to expand...
Click to collapse
Read this thread first, especially the first post. You can skip step 1 and 2 as long as you have the 11 files on the list. Here: http://forum.xda-developers.com/showthread.php?t=269118
cktlcmd said:
Read this thread first, especially the first post. You can skip step 1 and 2 as long as you have the 11 files on the list. Here: http://forum.xda-developers.com/showthread.php?t=269118
Click to expand...
Click to collapse
Thanks m8
I'll have a look at it. I appreciate the help.
I must be stupid becaue I'm not getting it right. I keep on getting "Connection Error"
Please help.
maybe this will work for you
hello,
i too have problems with flashing roms. i have bootloader 1.01 and it ignores whether the device is connected via usb or not - it will simply display 'Serial' or 'USB' no matter whether i disconnect or connect the device. however i have found out that to be able to flash your device one must in such case:
1) enter the bootloader mode (flash+power+reset) repeatedly until you will see both 'USB' on the device screen and 'USB' as a connection option in mtty. it might help trying with both disconnected and connected device while entering the bootloader mode. this is the worst part.
2) once you see 'USB' as a connection option in mtty, choose it and connect. Press ENTER, 'USB> ' prompt should be displayed, type 'set 14 0' and press ENTER. close mtty
3) enter the device into the bootloader mode again. this step is needed, without it the flashing application will timeout.
4) now you should be able to flash it.
hth, fuf.
Try reading this thread: http://forum.xda-developers.com/showthread.php?t=285299
I think you have the same problem where the computer can't recognize the Universal. The solution is in there too.
cktlcmd said:
Try reading this thread: http://forum.xda-developers.com/showthread.php?t=285299
I think you have the same problem where the computer can't recognize the Universal. The solution is in there too.
Click to expand...
Click to collapse
Thanks m8
At last I got it right. I'm first trying the Helmi 3.3 Rom. Will try the Latest Jasjar Rom later.
I get a error when my Jasjar boots.
sddaemon.exe cannot be opened.
What is this?
Ok. First I want to thank's all of the xda team to brings us so much fun with our HTC phone. HTC makes very good machines and XDA brings it to another level of performance.
Here's my problem. I unlocked my phone, then make a hardspl. I see the confirmation of this in the tri-color screen. So by now, everything works correctly.
Then each time I try to flash a ROM with the PC (USB) it say "error 220". And when I try to flash with my SD card, and go to the booting screen, it brings my on a grey screen that offer my two choice 1) "abort with "volume less" button or 2) upgrade the ROM with "power" button. But the power button doesn't do anything. When a press it nothing happend. The "volume less" button work perfectly but only for aborting. I've try the other buttons but nothing worked. It's like the power button just doesn't work.
I've followed all the instructions given in this xda page : "Flashing your First GSM Rhodium Rom "
I have a canadian TP2 from Telus.
I somebody can help.
Put your phone in bootloader and try to flash USB. You will NOT have an active sync connection but your bootloader screen will show USB at the bottom.
Let me know
Russ
Rickforet said:
Ok. First I want to thank's all of the xda team to brings us so much fun with our HTC phone. HTC makes very good machines and XDA brings it to another level of performance.
Here's my problem. I unlocked my phone, then make a hardspl. I see the confirmation of this in the tri-color screen. So by now, everything works correctly.
Then each time I try to flash a ROM with the PC (USB) it say "error 220". And when I try to flash with my SD card, and go to the booting screen, it brings my on a grey screen that offer my two choice 1) "abort with "volume less" button or 2) upgrade the ROM with "power" button. But the power button doesn't do anything. When a press it nothing happend. The "volume less" button work perfectly but only for aborting. I've try the other buttons but nothing worked. It's like the power button just doesn't work.
I've followed all the instructions given in this xda page : "Flashing your First GSM Rhodium Rom "
I have a canadian TP2 from Telus.
I somebody can help.
Click to expand...
Click to collapse
Thank's for this suggestion but like I've said in my firt post, I've already tried this an obtain this message "error 220".
Russ741 said:
Put your phone in bootloader and try to flash USB. You will NOT have an active sync connection but your bootloader screen will show USB at the bottom.
Let me know
Russ
Click to expand...
Click to collapse
Rickforet said:
Thank's for this suggestion but like I've said in my firt post, I've already tried this an obtain this message "error 220".
Click to expand...
Click to collapse
ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device's battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
Source
Let "search" be ur best friend around here...
Like said above, batt power must be above 50%. I do believe it says so in the instructions as you flash from RUU. To get around that you can flash from sd but make sure you have sufficient power to complete. It is faster if you flash from sd anyway.
kwambewright said:
Like said above, batt power must be above 50%. I do believe it says so in the instructions as you flash from RUU. To get around that you can flash from sd but make sure you have sufficient power to complete. It is faster if you flash from sd anyway.
Click to expand...
Click to collapse
Thank you all for your help. It's more encouraging to search a solution together.
Well, now there is suffisiant power on my battery, the process seems to go well since I got a knew error message : ERREUR [226] ECRITURE MEMOIRE FLASH (my translation : "flash memory wrinting")
Rickforet said:
Thank you all for your help. It's more encouraging to search a solution together.
Well, now there is suffisiant power on my battery, the process seems to go well since I got a knew error message : ERREUR [226] ECRITURE MEMOIRE FLASH (my translation : "flash memory wrinting")
Click to expand...
Click to collapse
ERROR [226] : FILE WRITE
This could indicate that the downloaded image (.nbh file) is corrupt, re-download the image.
Redownload the ROM
DaDoctor said:
ERROR [226] : FILE WRITE
This could indicate that the downloaded image (.nbh file) is corrupt, re-download the image.
Redownload the ROM
Click to expand...
Click to collapse
I've tried to download the ROM from different sources and I also try different ROM versions. Always the same error.
Thank you for your help.
My mistake !
I'm really sorry guys. It's a begginner mistake. I realized that I have a CDMA phone so I had to find a ROM to fit this particulirity. I found a good one and it work perfectly.
Sorry to waisted your time and thank's again for your support.
Hello all,
I'm trying to remove the bootsound for my Desire and so followed the instructions in thread 675580, page 3 (can't post direct URL because I'm a new user)
I replied there saying it does not work but after rereading carefully, I think it's because I tried the command while not being in recovery mode.
I then went around and read a few threads to figure out how to enter this mode. I thus followed the instructions in thread 6710092, reply number 4 in the part about "How to flash ROM".
I can get up to step 6 just fine. I even have the black screen with red triangle showing up. I then try the next step, that is running "recovery-windows.bat"
Unfortunately, adb-nilezon says it did not find any device and so errors out in the three steps inside the batch file.
The only option that I was able to find to get back the phone in a workable state was to remove the battery.
I noticed a behavior of the phone that is not mentioned in the above thread, so maybe I did not do something right.
In Step 5, right after I plug the desire to the PC, Windows says it has found a new device and complains it could not find the driver. I tried to have it search for drivers, but it could not find anything and thus aborted the install.
Along with this, in step 6, right after I press the power button to select Recovery, the phone seems to "reboot" as it shows the white HTC boot screen and it vibrates.
Is it possible that I am missing a part of the correct install?
I read all replies to the mentioned tutorial thread, some users have the same problem so I created a Gold card, which I believe I did right. But this did not change my situation.
When not in recovery mode, I'm able to use USB Debugging to connect to the phone and send my test applications via adb just fine.
Many thanks for your time and patience
Olivier
obones said:
Hello all,
I'm trying to remove the bootsound for my Desire and so followed the instructions in thread 675580, page 3 (can't post direct URL because I'm a new user)
I replied there saying it does not work but after rereading carefully, I think it's because I tried the command while not being in recovery mode.
I then went around and read a few threads to figure out how to enter this mode. I thus followed the instructions in thread 6710092, reply number 4 in the part about "How to flash ROM".
I can get up to step 6 just fine. I even have the black screen with red triangle showing up. I then try the next step, that is running "recovery-windows.bat"
Unfortunately, adb-nilezon says it did not find any device and so errors out in the three steps inside the batch file.
The only option that I was able to find to get back the phone in a workable state was to remove the battery.
I noticed a behavior of the phone that is not mentioned in the above thread, so maybe I did not do something right.
In Step 5, right after I plug the desire to the PC, Windows says it has found a new device and complains it could not find the driver. I tried to have it search for drivers, but it could not find anything and thus aborted the install.
Along with this, in step 6, right after I press the power button to select Recovery, the phone seems to "reboot" as it shows the white HTC boot screen and it vibrates.
Is it possible that I am missing a part of the correct install?
I read all replies to the mentioned tutorial thread, some users have the same problem so I created a Gold card, which I believe I did right. But this did not change my situation.
When not in recovery mode, I'm able to use USB Debugging to connect to the phone and send my test applications via adb just fine.
Many thanks for your time and patience
Olivier
Click to expand...
Click to collapse
Not sure if you do or not but do you need to have Htc Sync installed for the drivers?
I do have HTC Sync installed
Are you rooted? You need root to do this. If you are then why not use fake flash or unrevoked to enter recovery.
No I'm not, but the message in thread 675580 says there is no need for it, hence my tries here.
I'd rather not root my device if I don't have to, for the time being that is.
obones said:
No I'm not, but the message in thread 675580 says there is no need for it, hence my tries here.
I'd rather not root my device if I don't have to, for the time being that is.
Click to expand...
Click to collapse
Recovery-windows.bat won't work unless you are rooted. The screen with the red triangle isn't actually recovery mode. The .bat file you would run pushes the recovery to the phone.
If you are not going to root, then you can get an app from the market that puts your phone on silent as you switch it off, and then back to normal when it's booted. This disables the boot sound. It's called silent boot I think.
Well then, I'm missing something from the other thread (675580) as I can't get the command to work.
I'll wait over here for any comments.
Thanks
obones said:
Well then, I'm missing something from the other thread (675580) as I can't get the command to work.
I'll wait over here for any comments.
Thanks
Click to expand...
Click to collapse
try fake flash? ive never used it so i duno if u need to be rooted
Fake flash needs root. No custom recovery will work without root. Quite simply, if you are not rooted you will not have write access to /system
please help.
i try to install froyo rom.
after flash FroYo_inkreDroid (14.07.2010) rom (throught standart flashrom procedures by update.zip) the device will not boot into os. i try update modem and after this the device win not booting to recovery mode.
i try press both combination (back key + power and volume down + power). the result of both combination is: 7 short vibro signals and black screen.
please help me, how me recovery my device.
thnx and sorry for my english.
your going to have to root it.
After 3 months of searching, I'm presenting you the method to Root your ASUS Fonepad 7 FE375CG (FE375CXG)
Introduction:
Originally this Rooting method appeared on 4pda, a Russian android forum meant for Russian community.
I translated the content of the Rooting in English below.
I hope the people, who have long waited for a working Lolipop Root, will find this guide useful.
Disclaimer:
* Warranty is void.
* I don’t guarantee that this will work.
* It maybe cause bad effects to your tablet.
* You are responsible for any damages or other issues that may arise directly or indirectly because of this.
* Very important: All your data and programs will be lost!
Before starting:
This root is specifically for WW_fonepad-12.14.3.18 (that's World wide version - lolipop).
This root will work both for FE375CG and FE375CXG.
To this date, 12-March-2016, WW_fonepad-12.14.3.18 is the latest update for this tablet.
Using this method will require to download 4 objects, in total of 900 MB.
Using this method will require a PC and a SDcard.
As for SDcards, I recommend Class 10 SDcard for android.
Step1: Pre-rooting - Check your software model.
1. Make sure that you are fully updated to WW_fonepad-12.14.3.18 (Lolipop) via OTA update.
2. You can check your firmware version here. ::: Settings --> About --> Software information --> Build number
Step2: Preparing firmware
1. Go ahead and download firmware ==> UL-K019-WW-12.14.3.18-user.zip (Lolipop) (800mb) ::: (Look at this picture)
2. Rename the zip file to MOFD_SDUPDATE.zip
3. Place MOFD_SDUPDATE.zip in your SDcard. (Don't put it inside another folder. ) (Look at this picture)
Step3: Preparing USB connection
1. Download USB-drivers for ASUS connectivity ===> Download ASUS_Android_USB_drivers_for_Windows.zip, then unpack it, then install Install_Driver.bat
2. Download USB-drivers for ASUS connectivity ==> Download and install IntelDnXUSBDriverSetup.zip.
Step4: Rooting
1. Turn off your Asus fonepad 7 FE375CG (FE375CXG)
2. At the same time, Press and hold Vol+, Vol- and Power for 4 seconds. ::: Screen on your Fonepad will remain turned off
3. Connect Fonepad to computer
Initializing rooting/using downgrade.cmd:
4. Download rooting tool ===> Download Downgrade_K019_NEW.zip, unpack it and start Downgrade.cmd. ::: Blue window will appear on your monitor and start working
5. Wait till you see logo Intel appear on your tablet. Disconnect from PC then turn off your tablet by holding power-button.
6. On tablet, again press and hold Vol+, Vol- and Power for 4 seconds.
7. Connect Fonepad to computer
8. On computer, hit Enter. ::: Rooting will continue
9. Later, you'll get a notice "ERASE USER DATA (FACTORY RESET)?". When you see that you should Only press ENTER.
10. Wait at least 10 mins for the rooting process to finish. When everything is done, the blue window (Downgrade.cmd) will close by itself.
Finalizing rooting/using DROIDBOOT:
11. Once Downgrade.cmd closes, your tablet will be in DROIDBOOT screen.
12. On tablet, Insert your SDcard into Fonepad. (MAKE SURE THAT YOUR HAVE PLACED MOFD_SDUPDATE.zip INSIDE YOUR SDCARD (Like in Step2).
13. With Vol+ or Vol- navigate to “Recovery” then click Power to select ::: Your tablet will proceed to root. Wait 5~10 minutes. When everything is done, your tablet will be turned-on and ready.
Congratulations. You've done it!
14. Go ahead and update SuperSu in Play Store.
It worked for me so it should work for you.
Thank yous:
Thank you 4pda for providing this method of rooting, source.
I copy pasted disclaimer from this guy's post, someone else's thread, as this sums everything well.
To Suzukube, for providing feedback to this guide.
Cheers,
Mello
Thank you I bought one yesterday, I'm really lucky ! I can't found the Downgrade_K019_NEW.rar file ? I try this one but no downgrade.cmd inside https://yadi.sk/d/EjGOWsFuicPJE
suzukube said:
Thank you I bought one yesterday, I'm really lucky ! I can't found the Downgrade_K019_NEW.rar file ? I try this one but no downgrade.cmd inside https://yadi.sk/d/EjGOWsFuicPJE
Click to expand...
Click to collapse
Download link has been applied. You can find it in Step4. :good:
Thank you ! I'm trying again !
---------- Post added at 06:23 PM ---------- Previous post was at 05:28 PM ----------
Hello ! I successfully rooted my phone, your tuto is perfect
Just : 5. Wait till you see logo Asus/Intel appear on your tablet. Disconnect from PC then turn off your tablet by holding power-button.
Click to expand...
Click to collapse
>>> Only an Intel logo appeared for me. I waiting a little longer expecting seeing another Asus/Intel logo But it was fine ^^ ! And it's easy to do, we have almost nothing to do ! I rooted because 8gb of memory is not enough, so I want to incorporate Sys App Update in the System partition
Oh Also, after step 13, your tablet will take a lot of time to boot, like 5 minutes ^^ !
To save your device, there is an amazing Asus application. It is called "Sauvegarde" in french. YOu can use it to restore your apps settings
suzukube said:
Thank you ! I'm trying again !
---------- Post added at 06:23 PM ---------- Previous post was at 05:28 PM ----------
Hello ! I successfully rooted my phone, your tuto is perfect
>>> Only an Intel logo appeared for me. I waiting a little longer expecting seeing another Asus/Intel logo But it was fine ^^ ! And it's easy to do, we have almost nothing to do ! I rooted because 8gb of memory is not enough, so I want to incorporate Sys App Update in the System partition
Oh Also, after step 13, your tablet will take a lot of time to boot, like 5 minutes ^^ !
To save your device, there is an amazing Asus application. It is called "Sauvegarde" in french. YOu can use it to restore your apps settings
Click to expand...
Click to collapse
Haha, Keep your smile up!
I'm always happy to share a working solution with good people like you!
I will incorporate your feedback into the guide, thanks for your feedback!
Perfect I linked your tuto on my (frecnh) reviews of that Phablet ^^ ! Rooted, it's just perfect ! You can do so much things with it !
Thank you
it worked with my device fe375cg
Hi , is there any way not losing user data ?
m.tarhsaz said:
Hi , is there any way not losing user data ?
Click to expand...
Click to collapse
Hi Tarhsaz,
In short, there isn't
So for example, you should redownload your calculator........ O_O
Ahaha I'm kidding xD
But really, you should redownload whatever you want to have after Rooting.
And backup your important data on computer or somewhere else, before rooting.
i have message intel soc device detection failed
i need help
I followed all the instructions, and this was the result, I need help to get my phablet
finding update package...
E:failed to mount /sdcard (invalid argument)
E:Can´t mount /sdcard/MOFD_SDUPDATE.zip
SD Instalacion aborted.
E:Installation failed with status 1
Thanks
Carlbornoz said:
i need help
I followed all the instructions, and this was the result, I need help to get my phablet
finding update package...
E:failed to mount /sdcard (invalid argument)
E:Can´t mount /sdcard/MOFD_SDUPDATE.zip
SD Instalacion aborted.
E:Installation failed with status 1
Thanks
Click to expand...
Click to collapse
Did you stop at Step 13?
Did you make sure that you have put MOFD_SDUPDATE.zip in SD card before step 13?
Remember to place MOFD_SDUPDATE.zip in SD cards but not inside a folder
mellomilky said:
Did you stop at Step 13?
Did you make sure that you have put MOFD_SDUPDATE.zip in SD card before step 13?
Remember to place MOFD_SDUPDATE.zip in SD cards but not inside a folder
Click to expand...
Click to collapse
As it is in the instructions at the root of the sd card
Carlbornoz said:
As it is in the instructions at the root of the sd card
Click to expand...
Click to collapse
Try with a new sd card, it will work
hi, i need help. my fe375cxg got rooted according to step 10 without much problem. then i went to step 11 & inserted SD card keeping the file MOFD_SDUPDATE.zip in root folder but recovery at step 13 failed to find the file, so i mistakenly rebooted. now it does not go to recovery state. if i push vol up & power switch at the same time it vibrates & shows "ASUS IN SEARCH OF INCREDIBLE powered by android" but does not go to recovery. i assume if i can go to recovery then i can flash MOFD_SDUPDATE.zip file. can anybody suggest how to go to recovery OR any other idea how to proceed. Thanks a lot in advance for your feedback.
Edit: At last by pushing vol up & power switch at the same time for a short time i was able to go to recovery mode. However, it looks like the file name should be MOFD_SDUPDATE (not MOFD_SDUPDATE.zip, since it is already a zip file) in the root folder of SD card, and it worked smoothly for me.
At the same time, Press and hold Vol+, Vol- and Power for 4 seconds.
Doesnt work with my device Asus Fonepad FE375CXG-1A006A. Whats that for a mode? Is that recovery mode or bootloader? Should I feel a vibration when pushing these 3 buttons? Does this work with win10x64?
I tried now Recovery mode (like smith74 is suggesting in his edit), but now --> Intel SoC Device Detection Failed in the BlueWindow appears
I also tried it again starting the .cmd as administrator --> !!! ERROR !!! FWR_DnX NOT EXIST, EXIT!
Edit: Ok now I got it. (It works with Win10x64 too, you don't have to use Win7 or sth like that). The trick is that you don't get any haptic feedback from the FE375CXG and you also don't (nearly) see anything on screen of the fonepad. You really have to push all 3 buttons (+) (-) and (Power). You can count to 4 or (better) take a deep look on the fonepad-screen, it flickers! Then release the buttons. After when you plugin your device (and everything is ok) Windows shows a screen, installation of "moorefield" or "adb-drivers.." something like that. Then you can go on with 4) Downgrade.cmd
Great Job .. many thanxx
How to downgrade from Lollipop to kitkat on Asus fonepad fe375cg? please, help!
So I'm facing some problems after upgrading to Lollipop via OTA. The device became very slow, I can hardly use it. Can I use this method to downgrade to KitKat? In other words, Can I use Kitkat firmware instead of the lollipop and continue with the same steps?!
Confirmed work for K019 Asus Fonepad 7 FE375CXG, indonesia,
with latest firmware WW_fonepad-12.14.3.18 official ota.
never tampered with, locked bootloader, not rooted.
i only used this tablet for my porn device.
Thank you op,, you have no idea how i bricked 2 different asus devices with different methods,,, and this is the only method that works....
As for problems, i have a few:
1. Step 4-4, like zardoz77 said,, there's no feedback whether i successfully pressed the vol+,- and power button,,, for me,, there's no flickering screen either,,, but what works for me is,, you have to press that 3 button for EXACTLY 4 SECONDS, and then release it,,, more or less than 4 seconds,, then it's gonna be "intel soc detection failed".
2. Step 4-8, when i see intel logo on tablet, then disconnect -> press3 button -> reconnect -> hit enter,,, the blue window unable to recognize the tablet!! and there are dozens of "attempt to reconnect" text,,, then i yanked the usb cable,, and it continues to root,, turns out the problems is my usb cable,, just one of the few solutions of that particular step.
3. Step 4-13, for me, the first time boot after recovery is 15-20 minutes,, at first, i thought it failed,, but then gave it a time,, it will show you the welcome screen.
Thanks a lot OP,,
Now, time to strap those sweet dualshock3 controllers.
tyring to delete my posting ... but don't know how
Hello there!
I just bought a Razer Phone from a guy who said that it has a bad motherboard...I bought it pretty cheap and tried to revive it, because why not, i ve done this to other phones.
The phone was somehow reset, it boots until the setup wizard, where i can set the language , emergy call or maginification without problems...
The problem is that if i press " Get Started ", it popps a message like "setup wizard keeps stopping" and so on...i cant pass that screen, the message appears everytime i press "get started" button.
So, i tried flashing... The phone boots like is an unlocked one, but no fastboot/adb ?!
So, the only chance was adb sideload. I pushed different roms / factory images... Nothing.
Hardly, i found an OTA.ZIP file, and tried to sideload it. It worked till 47% ... Then, it said that "PACKAGE IS FOR CHERYL BUT EXPECTED CHERYL-CKH"... not a single rom/factory image worked like this... It loads near 50%, when the other stop right after start.
Later, i discovered i have the US carrier version cheryl-CKH ... And i cant find it's OTA...if one of you can provide me, i ll be very grateful, even buy you a beer or smth.
Thank you ! And please help me...
Edit: i also tried with EDL mode, with Qualcomm Flash Image Loader , but i dont have/know the Programmer Path & Search Path.
I'd advise to unlock the bootloader following the instructions here; make sure to unlock the critical partition as well.
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
Then flash the stock factory image of your choice from here;
https://developer.razer.com/razer-phone-dev-tools/factory-images/
When you unzip these factory images, there is a flash_all.bat file to double click and it should do it all for you.
The phone should be good to go after this. I did this recently on my razer after spending some time flashing some of the 9.0 pie GSI images and it worked great.