Hello,
Just wondering if anyone has experimented with Tegrak Overclock Ultimate's GPU optimization settings. It allows you to undervolt the GPU. Has anyone tried this and is there any benefit to battery life savings with this? I am playing around with the settings right now, so I'll post my results later. So far been able to undervolt the 267 mhz step by -75mv from 1000mv down to 925mv (900mv is unstable for me). And I undervolted the 160 mhz step by -150mv from 900mv down to 750mv. There is also a 200 mhz step I haven't played with. Perhaps keeping the GPU at 200/160 can yield potential battery savings when playing games because games drain the battery so fast.
Hm. I seem to be able to undervolt the 200 mhz step to 750mv as well. I'm going to run a 200/160 gpu setup at 750mv and see if I can save any battery playing Gun Bros and will let you guys know.
caaznkid said:
There is also a 200 mhz step I haven't played with. \
Click to expand...
Click to collapse
Really? I only have the 267 and 160 MHz clock settings available. Any thoughts anyone?
Oh, I have underclocked my GPU settings but only by a modest 25mV each.
There's only 2 steps, but u can change the clock between 160, 200, and 267
yep ... good results
Yep I've been experimenting with GPU undervolting and had some sucess. So I was methodically working downwards and testing stability... then i saw this thread and thought what the hell, right? I shot for lowest mv of 750 and it's rock solid at 200mhz.
Can confirm 750mv stable at 100, 134, 160 and 200mhz. 267mhz can't be undervolted that much.
I've locked 200mhz 750mz for both speed steps and left it at that. Phone has yet to display any instability in a couple of days of mixed use including gaming. Battery life better? Subjectively yes, mostly I notice phone doesn't get so hot playing Dead Space.
Power consumption scales down almost linearly with clock cycles, and exponentially with voltage (right?). So by my math GPU is using about 40% of the power it does at full 267mhz. I wonder what the TDP of the exynos 4210 is and how much the Mali 400 contributes to that, would give some idea of what battery life to expect. Since GPU sits idle a lot, I doubt it's a magic fix.
Such is the power of our phones I have to underclock the CPU and GPU quite far before any 3D game gets too choppy to play. 160mhz is more than fine for most.
Usually undervolting makes the most sense for power saving because a given computing workload takes a certain number of cpu cycles. But 3D usually tries to render as many frames as it can, with the exception of S2's 60fps frame cap. So slowing down the GPU to no more than you need might improve gaming battery life?
My SGS2 is a bit sensitive to undervolting although underclocking of CPU, so I'm happy be able to so agressively undervolt the GPU.
I'd be interested to know who else can just set 200mhz & 750mv and have it rock solid? If not, 200/800 or 160/750?
I've rarely had problems when I use Tegrak. Then again, I undervolt 100mv on my cpu between 200-1000mhz, and about 50mv on my GPU at 267mhz with the noop scheduler and tweaks enabled. If I can get Tegrak to work with the Gunslinger kernel (currently causes reboot loops when I load the overclock module), I'll report back on battery life with Tegrak and experiment a little more.
jyaworski said:
I've rarely had problems when I use Tegrak. Then again, I undervolt 100mv on my cpu between 200-1000mhz, and about 50mv on my GPU at 267mhz with the noop scheduler and tweaks enabled. If I can get Tegrak to work with the Gunslinger kernel (currently causes reboot loops when I load the overclock module), I'll report back on battery life with Tegrak and experiment a little more.
Click to expand...
Click to collapse
I had the same problem with Gunslinger, I decided to keep my phone on Rogue Stock EL29.
I've been able to drop my GPU Level 0 Clock to 160mhz and voltage to 850mv with out any issues.
I also keep my GPU 1 Clock at 100mhz and my voltage at 750mv without a problem.
Using noop of course.
Changing GPU clocks and volts doesn't help much.
Keeping your CPU Internal Voltage and Core Voltage -50mV and keeping it scaled 200-800 MHz will give you much better battery.
I think the effect would be more significant in ICS since ICS use GPU to render UI
Hi guys, I'd like to ask you a question about undervolting. I'm using Andromadus Beta 5 at the moment and it's working well enough for me, but under my rather heavy usage, my battery seems not to last that long. I'm already on the latest .19 radio and my CPU is clocked at 1GHz max with smartass v2 governor and 768 max conservative screen-off (with SetCPU).
I remember that when I was on GB (CM7.1) I used a slightly lower cpu voltage and everything was fine, so does anybody know if it's actually possible to edit the voltage table or whatever in order to UV my CPU on Andromadus?
Thanks in advance!
Don't bother, the Andromadus kernel already has somewhat low voltages. That said: https://twitter.com/rmk40/statuses/170239362020282369
Thanks for the answer. Actually the fact that undervolting the CPU doesn't bring any improvement in battery life seems a bit strange... I was hoping at least in a 5% increase. I also have to say that I have 3G and data always active, so probably that's the main reason of my short battery life.
I figured that undervolting would help with battery life and any heat issues. Does anyone know any undervolt settings that work well?
For the people that have been overclocking this phone for a while now, what are your opinions on the best max frequency above 1.5GHz to clock to while still keeping decent battery life?
Overclocking isn't exactly a battery friendly thing to do, you will see battery drain if you clock to higher frequencies. My only advice is don't oc too high if you want to keep battery life in mind. Going to 1.67 or 1.72 should give you a decent speedup without murdering the battery.
I run mine at 162 its no diff in voltage from 151 at least on uber kernel it is.. Also try to under clock the the freq until or happy and no random reboots
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
There's a bunch of guides and info out there on overclocking and even underclocking the max cpu, however when it comes to changing the minimum CPU speed I can't find much and recently I have heard much different things than what I had assumed and had been told in the past. So I was wondering if anyone could give me a rundown on a few things.
Does lowering the minimum cpu value to around/below 100 MHz help save battery or does it hurt battery life since it takes longer to finish tasks at that clock speed? And in regards to finishing tasks, what is an optimal speed for the minimum cpu? And lastly, how much impact does the minimum CPU value have on the system and battery and is the savings (if any) worth it?
Sent from my SAMSUNG-SGH-I747 using Tapatalk