So i've bricked my Nexus 5x (h791) 32gb by flashing the Nexus 5 bootloader onto it. i've been searching for a few days and managed to get phone phone to switch between "qualcomm HS-USB QDLoader 9008" and " QHSUSB_BULK"
it shows as unknown model on LGUP when i force the "LGE Android Platform USB serial port" or "LGE Mobile USB serial Port" other than that it wont show up in LGUP.
I have tested this on 2 windows machines. one being windows XP the other windows 10. i do have a pc running ubuntu which i can use but i wouldnt know where to start when using that.
Any help or advice would be much appreciated!
you find any solution? i have the same problem but i am iam in fisrt phase qualcomm 9008. i searcing 3 days but i find results only for nexus 5 not 5x . pls anyone may help us
me to , have this problem , it's been a week .
i don't know why 5x have download mode .
looking for the same solution ... Nexus 5X bricked with Qualcomm 9008 if you got anything please contact me for djbebe at g55gle
this might help
use BoardDiag
Duckscreen said:
use BoardDiag
Click to expand...
Click to collapse
Latest available BoardDiag does not support N5X..
I asked LG service, and that DONT HAVE any software for 5x, so only way is replace entire motherboard.
So, at the moment, 5x with broken GPT or boot - is not repairable... I will try to flash a full-flash in new empty EMMC, and replace chip, but so many risks.
spastikitten said:
So i've bricked my Nexus 5x (h791) 32gb by flashing the Nexus 5 bootloader onto it. i've been searching for a few days and managed to get phone phone to switch between "qualcomm HS-USB QDLoader 9008" and " QHSUSB_BULK"
it shows as unknown model on LGUP when i force the "LGE Android Platform USB serial port" or "LGE Mobile USB serial Port" other than that it wont show up in LGUP.
I have tested this on 2 windows machines. one being windows XP the other windows 10. i do have a pc running ubuntu which i can use but i wouldnt know where to start when using that.
Any help or advice would be much appreciated!
Click to expand...
Click to collapse
Have you got the phone back to life??
Related
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
aeroexpert said:
Did anyone managed to unbrick his lg g3 in following mode and how ?
No boot, No recovery, No fastboot or download mode working, phone is completely in dead boot state,
and is recognized as lge androidnet usb serial port, when connected to PC
not as Qualcomm HS-USB QDLoader 9008 ,
kindly help me if you can.
thank you
Click to expand...
Click to collapse
Search in this forum about "Qualcomm 9008".
But you need to disassembly a little parts of your phone and... you need a little piece of wired.
Good Luck!:good:
Hy there guys, i have a nice LG G4, nice phone, but as you all know the problem with bootloop it eating all H815.
My phone entered 2 times in boot loop end at 3 time dead, no screen on, no charge nothing.
I pulget in my laptop and Computer Management wont recognise, i looked up and i find the driver and now it show's Qualcomm HS-USB QDLoader 9008 ( COM10 ) i found a program named QFIL but i don have the 3 parts of software for phone :
- Programmer Path
- Search Path
- XML
I want to ask it is possible to work, or i will throw to garbage.
The phone is out of warranty.
Thank you in advance.
While flashing a new image on my 32 GB Nexus 5X yesterday, I flashed the wrong bootloader and hard-bricked my phone. It won't respond to key combos I've tried and won't even load in a Download Mode. I stumbled upon this guide and was managed to have my Windows PC detect it as a"Qualcomm HS-USB QDLoader 9008" device under "Ports" in Device Manager. I don't know how to proceed further because the guide assumes a phone can be loaded into Download Mode and mine can't so it is undetectable in LGUpdate tool.
Could anyone help me with this? Thank you.
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Have the same issue - were you able to figure out how to fix it?
The only way to fix it would be to have a copy of the ROM that can be flashed in EDL mode, which is the mode your device is in. Google doesn't make EDL-flashable copies of its ROMs available - not a surprise - since that mode is mainly for tech support personnel. I'm afraid your only recourse is to contact Google and see what they can do for you.
freshmike said:
Hi All,
Is there any way to recover the phone from the Quectel QDloader 9008 COM mode ? Screen not coming up, no adb or fastboot mode, the only think I see in the Windows Device Manger is that the phone is connected as COM Port.
Thx for any advice.
Click to expand...
Click to collapse
Phone should still be covered under manufacturer's warranty if anything call it in see you at the phone shut off and did that and they'll replace it
@freshmike what did you do to get to this state?
davidcie said:
@freshmike what did you do to get to this state?
Click to expand...
Click to collapse
No idea, not mine got it from a friend to try to fix. I think the memory is grilled. On the other hand there are so many complains regarding the quality of Pixel phones, I would not want one even as a gift
try it !
Hello, I need help with my LG, the cell phone ran out of battery while updating firmware, now I cannot enter download mode, nor fastboot, and the recovery does nothing, when I turn on the cell phone it always ends up in a black screen with a text of the type "CMD" putting a number and something of "udc_start" and that's it.
windows 10 makes the normal beep but does not recognize the model, in the device manager "android device" appears with the warning sign that there are no drivers.
LGUP does not recognize the device
The only way I had to "make windows recognize it" was with "QFIL" and touching the two pins on the motherboard, in the program it says:
"qualcomm hs-usb qdloader 9008 (com4)"
I have never flashed a cell phone bios or a bootloader if I misunderstand (I am relatively new to android), I have only flashed "the operating system" in this case a 1gb .kdz
I have no idea how to do this, if I don't misunderstand, I need a .mbn (I think it's the bios), which is compatible with QFIL, which I couldn't find in all of google.
I've come across other .mbn of "similar" g4 models, I wonder if it will work if I at least try them.
They may not work perfectly, but at least turn on.
What do you suggest? I feel lost in an ocean t-t
Wachecheiro said:
Hello, I need help with my LG, the cell phone ran out of battery while updating firmware, now I cannot enter download mode, nor fastboot, and the recovery does nothing, when I turn on the cell phone it always ends up in a black screen with a text of the type "CMD" putting a number and something of "udc_start" and that's it.
windows 10 makes the normal beep but does not recognize the model, in the device manager "android device" appears with the warning sign that there are no drivers.
LGUP does not recognize the device
The only way I had to "make windows recognize it" was with "QFIL" and touching the two pins on the motherboard, in the program it says:
"qualcomm hs-usb qdloader 9008 (com4)"
I have never flashed a cell phone bios or a bootloader if I misunderstand (I am relatively new to android), I have only flashed "the operating system" in this case a 1gb .kdz
I have no idea how to do this, if I don't misunderstand, I need a .mbn (I think it's the bios), which is compatible with QFIL, which I couldn't find in all of google.
I've come across other .mbn of "similar" g4 models, I wonder if it will work if I at least try them.
They may not work perfectly, but at least turn on.
What do you suggest? I feel lost in an ocean t-t
Click to expand...
Click to collapse
Check out this thread:
[GUIDE][9008][EDL|QDL][QUALCOMM ONLY] Unbrick via external sdcard (no QFIL!)The author is the definitive LG G4 hard-brick answer guy with possible solutions. You may be able to get some help there.
sdembiske said:
Check out this thread:
[GUIDE][9008][EDL|QDL][QUALCOMM ONLY] Unbrick via external sdcard (no QFIL!)The author is the definitive LG G4 hard-brick answer guy with possible solutions. You may be able to get some help there.
Click to expand...
Click to collapse
I'll take a look at it, thanks
Seems like a similar problem as I had, that's not gonna work though. The only way to fix it is to use a firehose which you can use a one from a Cyanogen MSM8939 device.