Develop Bugs

[Q] Stuck on Kindle Fire Logo Screen with no ADB

OK, folks. Hopefully somebody can help me out of this mess I've caused. I'm currently stuck on the Kindle Fire Screen with no access to ADB to get into fastboot or anything else.
Here's how I got there:
Fire was rooted and had CWM recovery installed using KFU
Downloaded Pure AOKP ICS ROM with 3.0 kernel
Flashed with CWM like an idiot, instead of using TWRP like the instructions called for
Here I am -- My Kindle shows up in Windows 7 Device Manager, but can not be found via ADB; it just hangs on the Kindle Fire boot screen.
I've done a lot of reading on the subject and I'm really hoping I won't have to resort to getting a factory cable.
Any help would be greatly appreciated, folks!

The only thing I can think of atm is either the KFU or the kindle fire unbrick utility. Try both.. good luck..

Sounds like you are not bricked and fast boot is possible.
I would recommend trying to fast boot twrp onto it and get into recovery.

BrickeI'd need some help

Let me start off by saying I'm pretty noob with all this stuff and I just need some instructs on what to do.
When I first got my Kfire I installed firefirefire on it so i could install some roms, later on I tried installing CWM and that's when I started having problems. After trying to install CWM my kindle fire just boots up and shows the FFF logo then reboots When I plug the kind into my computer windows doesn't pick it up and I can't do anything actual device since it reboots every 2sec so I'm unsure how to fix it.

smitty5569 said:
Let me start off by saying I'm pretty noob with all this stuff and I just need some instructs on what to do.
When I first got my Kfire I installed firefirefire on it so i could install some roms, later on I tried installing CWM and that's when I started having problems. After trying to install CWM my kindle fire just boots up and shows the FFF logo then reboots When I plug the kind into my computer windows doesn't pick it up and I can't do anything actual device since it reboots every 2sec so I'm unsure how to fix it.
Click to expand...
Click to collapse
CWM doesn't work on KF, it's a known problem. Don't panic though, do you have the latest FFF 1.4a from hashcode? It has an option to recover from bootloop issues. You need to use TWRP to flash ROMs, which you can get using the kindle fire utility found on XDA.

cwmr does work on the kindle fire.
BUT there is a problem with a certain version of chip's ware levelers and a certain version of cwmr. (it only effects 1 type of chip). this only effects the chip partitions when a wipe or restore are performed.
Did you ever get into cwmr (and perform a restore or wipe?) if not then your in the clear from the superbug. & what version of cwmr did you try to install?
if it reboots after only 2 seconds, I would say the battery has depleted. (make sure to charge (with stock charger 1.8A) for at least 3/4 hours.
then i would use kfu to reinstall drivers etc and reinstall fff1.4a & twrp 2.1 then reflash a new rom.
follow this thread (if it charges).
read read & then read again (your driver issue should lie in there).
when you have adb & fastboot working we can have a look at what chip you have and if you have any damage.
---------- Post added at 09:28 PM ---------- Previous post was at 09:25 PM ----------
sorry forgot link http://forum.xda-developers.com/showthread.php?t=1552547
there you go

[Q] Kindle Fire - ABD, Bricked, Stuck at Boot

Hello bricked my Kindle about 5 months ago, and I tried everything I could to unbrick it. I recently started to attempt to unbrick it again and ran into the same problems.
OS - Windows 7 x64
KF - Kindle Fire (I got this around December 2011) (Firmware unknown)
Problem - Kindle Fire is stuck on the screen which says "kindle fire." Nothing else happens.
How did you cause this problem? - I was trying to install Cyanogen Mod, and my friend said he knew how to do it. Obviously he didn't.
Was the recovery installed prior to installing the mod? - No.
Have you installed SDK? - Yes.
Does ADB detect device? - No, I've been searching this forum time and time again for new instructions or new ways to do it. Reading other threads, it seems to be a driver problem. Yes, I've uninstalled it, and reinstalled it. I'm installed the driver the old way (Going to extras/google/usb_driver) then I tried the KFU's exe then I tried Amazon's way. Currently, the device (in Device Manager) is named Android ADB Interface. However, if I disconnect the device and reconnect it, it will give me "Unknown Device" and "Windows has stopped this device because it has reported problems. (Code 43)".
EDIT:I just noticed this is probably in the wrong section. Sorry! If it is, could a MOD move it please?
Additional Information - The Kindle Fire was rooted by me, and I did get ADB working before. Unfortunately, right now I cannot get it working. I believe if I can start ADB, that the KFU should do the trick. Also, if anyone has additional time and is feeling generous, I am more than happy to do Teamviewer to try and solve this problem.
I will continue trying to tackle this on my own. Thank you for your time.
~Cesgore.
My resources.
http://forum.xda-developers.com/showthread.php?t=1887026
https://developer.amazon.com/sdk/fire/connect-adb.html
https://developer.amazon.com/sdk/fire/setup.html
https://developer.amazon.com/sdk/fire/connect-adb.html
http://forum.xda-developers.com/showthread.php?t=1414566
http://forum.xda-developers.com/showthread.php?t=2005989

What CM build were you trying to attempt? what version of KFU did you try? I assume you have TWRP or CWM installed? and finally, is the Kindle Fire logo the regular one or is it blue?
Hopefully the answers that you give me will help, and I hope that I can help you too.

I think I got the same problem, and I'm a big noob.
Kindle Fire is stuck at the blue "Kindle Fire" screen, when I go on either recovery or normal boot it just hangs on "booting".
I did not install TWRP so I'm screwed. Tried adb reboot and some fastboot commands in order to change booting stuff so I can fix it up.
I was trying to install ICS through this guide: techhive.com/article/258452/how_to_install_ice_cream_sandwich_on_your_kindle_fire.html?page=2 (I'm not spamming :[ )
I did thesse steps:
fastboot -i 0x1949 flash recovery C:\kfu\software\openrecovery-twrp-blaze-2.1.1.img
3. Change the boot mode to Recovery:
fastboot -i 0x1949 oem idme bootmode 5001
4. Reboot into TWRP:
fastboot -i 0x1949 reboot
Click to expand...
Click to collapse
Right after I tried to reboot into TWRP it just got stuck into "Booting".
I have no idea what to do now :/
EDIT:
SO for some strange reason, it booted back to the default KF OS.
I unplugged my KF and turned it off, booted my Ubuntu partition, plugged the kindle back in and turned it on... it booted normally.
I'm gonna try and redo all the process, maybe SouKit can help you with this: http://forum.xda-developers.com/showthread.php?t=1850038
Not quite sure if it'll help in your case, but I've seen threads with people solving similar problems with it.

This thread did it for me http://forum.xda-developers.com/showthread.php?t=1750250

I used SoupKit to get the kindle into fastboot, then I installed TWRP through SoupKit.
After that I put in my ICS rom in Kindle's sdcard.
Booted up TWRP and installed ICS...
That's what I did, maybe it can help you out in case the other solutions don't work.

jma9454 said:
What CM build were you trying to attempt? what version of KFU did you try? I assume you have TWRP or CWM installed? and finally, is the Kindle Fire logo the regular one or is it blue?
Hopefully the answers that you give me will help, and I hope that I can help you too.
Click to expand...
Click to collapse
I apologize for the late reply.
What CM build were you trying to attempt?
CM 7
what version of KFU did you try?
KFU 0.9.6
I assume you have TWRP or CWM installed?
As for TWRP/CWM I sadly don't think that was installed.
is the Kindle Fire logo the regular one or is it blue?
Regular Logo
Thank you everyone else, I will follow your links and see if it helps.

Cesgore,
Try going into the KFU and installing TWRP with the kindle attached to the computer and see if it installs. It's okay if KFU doesn't see the device, just try it anyway. This worked for me and I was able to get into recovery. If not try installing FireFireFire the same way with KFU.
Also, is your Kindle showing up in device manager at all?

Ebicoustic said:
Cesgore,
Try going into the KFU and installing TWRP with the kindle attached to the computer and see if it installs. It's okay if KFU doesn't see the device, just try it anyway. This worked for me and I was able to get into recovery. If not try installing FireFireFire the same way with KFU.
Also, is your Kindle showing up in device manager at all?
Click to expand...
Click to collapse
Whoa. Whoa whoa whoa whoa whoa whoa whoa. By some miracle I just connected it and a the drivers decided to recognize it (Usually saids Unknown Device, and when trying to update it, it says it's on the latest version). Did KFU, said it didn't see the device. But TWRP installed and it just booted for the first time in MONTHS! I love you.
Thank you everyone else who help!

[Q] Kindle will only boot to TWRP

I'm rooting a kindle, and some weird things happened while I was rooting it, problems with rooting on Windows 8, But now that I have TWRP and FIREFIREFIRE installed, it won't let me boot to system. It flashes on and off of the shiny kindle Fire screen, then boots to TWRP. KFU says it is in Boot STatus 0x5003. Any help?

Ichigo said:
You're in the recovery boot mode. Change it to normal boot mode using kfu.
a.k.a. Josepho1997
Merry Christmas
Click to expand...
Click to collapse
Hello, sorry to bump an old thread, but when I tried to boot into normal boot mode, it tells me "The system cannot find the file specified." I have been stuck in this TWRP recovery mode for so long. Even when I get into Normal Boot mode, how do I get JellyBean installed so it loads that ROM? I have the Jellybean ROM files on the Kindle, which I can access via TWRP, but don't know how to install. HELP!!!

Well, right now I did a factory reset of the Kindle and I was able to get the KF back to it's defaults. I copied the Jellybean .zip file and gapps Jellybean .zip file to the root of the KF. I booted into Recovery Mode and I was finally able to see both .zip files when I clicked on Install. I thought I could do the Permanent Root now that I did the factory reset, but once I ran it under KFU, it would go through the process to install TWRP and then boot the KF into TWRP, but it doesn't look like it completed the root. How do I complete it?
In the meantime, I had went into Recovery Mode, went to Install and currently loading Jellybean onto the KF. I'm currently stuck at Verifiying partition sizes and it's been sitting there for a few minutes. How long does it take before it's updated to JB?

System Only boots to TWRP and KFU will not see kindle
I have a Kindle Fire 1... Not the HD when I got it in Dec of 2011 I got some help to get TWRP and CM7 Installed on it, and it worked great until a couple of days ago and now there is no help in the kindle fire room anymore so I was wondering if there is someone out there who would be willing to help me to get this to work again either through teamviewer or a Chat of some type, Gtalk, IRC anything at this point to get this to work again.
I have tried everything from a Hard reset, and KFU will not see it and I even tried a unbricking tool and that cannot find it either. Please help me out.
Thanks

CloudStrrife said:
I have a Kindle Fire 1... Not the HD when I got it in Dec of 2011 I got some help to get TWRP and CM7 Installed on it, and it worked great until a couple of days ago and now there is no help in the kindle fire room anymore so I was wondering if there is someone out there who would be willing to help me to get this to work again either through teamviewer or a Chat of some type, Gtalk, IRC anything at this point to get this to work again.
I have tried everything from a Hard reset, and KFU will not see it and I even tried a unbricking tool and that cannot find it either. Please help me out.
Thanks
Click to expand...
Click to collapse
What exactly is going on...spare no detail...
Sent from my Nexus 7 using Tapatalk 2

Stuck booting into TWRP
Hello Forum Lords, I hope that I found the proper thread for my problem.
I was simply trying to install Cyanogemod 9 on my wifes replacement KF1 after the first KF1 suffered some sore of hardware malfunction and would no longer take a charge. Somehow, somewhere I went horribly wrong this time around. I got stuck at the KF1 logo and eventually I got it to boot, but only to recovery.
My predicament is this: My KF1 is stuck booting into TWRP. Device manager on Win Vista recognizes the KF1 as Android Composite ADB Interface. When I try to use the KFU to boot the device into Normal Mode it says "cannot find the drive specified".
At the KFU starting menu, it says ADB Status: Online, Boot Status: 0x5003.
My ultimate goal is to get this thing running Cyanogenmod again. I am painfully noob at all of this. Please speak as you would to an escaped chimp who will not let go of the keyboard and mouse.
Thank you, anybody

Kindle Fire HD 8.9 recovery brick?

I was trying to install CM 12.1 to my Kindle Fire HD 8.9 and I believe it is bricked. I feel as if there is an easy fix but I have been trying for 2 month to no avail. So I finally decided to make an account to try to fix it. So I was using a tutorial to root my Kindle Fire, (I'm a new user so I can't post outside links yet) and everything was going fine until it would only boot into the blue Kindle Fire logo. After about a month I figured out that it was just my terrible, broken volume buttons, and I eventually booted my device into TWRP. From there, I tried to add the CM 12.1 to the Kindle, but it wouldn't recognize my device so I couldn't get into the device to add the files. So I just backed up my OS, and tried to boot into my recovery. I read somewhere that it is a big no-no. Who knows? Anyways, it booted into a normal Kindle Fire logo, just stuck. I did get my device into fastboot, but it won't recognize the device. Every time I try to use any recovery tool, KFHD SRT in specific, it just says no device found. I've been messing with drivers for ages. I've tried using the Amazon driver installer, tried using Android_winusb.inf (I don't even know if I was supposed to do that) and somehow every time I'd uninstall the driver, it would re-install as Android ADB Interface, and wouldn't be recognized by anything. Not ADB, or any recovery. Any help please? Sorry if this was posted in the wrong section, but please, someone just help me get my device running in CM 12.1 or any CM.