New issues in stock Marshmallow - Sprint Galaxy Note 4 Q&A, Help & Troubleshooting

Today I flashed the Marshmallow stock firmware (from general section).
I rooted it successfully using CFAR method.
I registered my fingerprint and chose it to unlock screen and it was ok...until I restarted the phone there was a message appeared
((Unable to use fingerprint to unlock,enter backup password ))
What is the problem?
And when I trying to enable the Reactivaton Lock it doesn't activate.
I am still in stock recovery.
Any fixes?[emoji30]
Updated :-
#1) If anybody get MM OTA please tell us ,did you notice the fingerprint issue when you restarted your device?
Fix: Maybe it's a normal thing. not an issue.
#2)Today after I restored my EFS partitions backup by using flashfire app my fingerprint doesn't work at all.
Fix: Maybe the ID information included in efs partition so the fix is wipe system, data, cache and dalvik cache then odin the pc1 firmware again or get OTA.
#3) Some apps don't have permission to write to external SD card.
Fix(partial): Backup your files in external SD card then format the SD card inside the mobile..... After that you'll find some apps have the permission to write to external SD card and some of them don't have... For now I don't know why some apps still don't have permission to do that.
I know there's a feature in Marshmallow that you can make the external storage as a portable or internal storage but I don't find it in our note 4.
#4) Sometimes the screen doesn't turned off automatically and still awake although it setting is to turn off after 1 minute.
Fix:
#5) How to find a solution to hide the external storage notification message?
Sent from my SM-N910P using Tapatalk

anees02 said:
Today I flashed the Marshmallow stock firmware (from general section).
I rooted it successfully using CFAR method.
I registered my fingerprint and chose it to unlock screen and it was ok...until I restarted the phone there was a message appeared
((Unable to use fingerprint to unlock,enter backup password ))
What is the problem?
And when I trying to enable the Reactivaton Lock it doesn't activate.
I am still in stock recovery.
Any fixes?[emoji30]
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Just Odin to OK1 and then take the Ota update in System Update tab in Settings. It's the safer way to avoid getting problems. I don't have that issue you mentioned.

Stuck in Ultra Power Saving Mode
I installed the OTA last night and turned on Ultra Power Saving Mode. I selected the option from the drag down menu to turn it off. I was prompted to select my launcher. I chose Google Now and a notification popped telling me Google Now is my default and how to change it. It is now stuck in black and white with my Google Now home screen but the only available settings are the same as if in Ultra Power Saving Mode. Please help.

Kris_b1104 said:
Just Odin to OK1 and then take the Ota update in System Update tab in Settings. It's the safer way to avoid getting problems. I don't have that issue you mentioned.
Click to expand...
Click to collapse
So what is the difference between OTA and the stock tar file I downloaded?
I need more info about these issues are they related to root or recovery?
Sent from my SM-N910P using Tapatalk

The fingerprint issue happens only after restarting the device? ???!!!!
If I enter my backup password then the fingerprint returns to work normally.
Sent from my SM-N910P using Tapatalk

anees02 said:
The fingerprint issue happens only after restarting the device? ???!!!!
If I enter my backup password then the fingerprint returns to work normally.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
This appears to be the new normal. With stock MM on the note 4 I have to enter the password to open the phone after a reboot. After that the fingerprint reader works normally until the next reboot. Anyone have any different behavior?

poit said:
This appears to be the new normal. With stock MM on the note 4 you have to enter the password to open the phone after a reboot. After that the fingerprint reader works normally until the next reboot. Anyone have any different behavior?
Click to expand...
Click to collapse
Is that normal ?
So choosing pin code or password to unlock the screen is better than using fingerprint scanner.
Sent from my SM-N910P using Tapatalk

anees02 said:
Is that normal ?
So choosing pin code or password to unlock the screen is better than using fingerprint scanner.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
---------- Post added at 12:21 AM ---------- Previous post was at 12:19 AM ----------
Its normal. .after reboot it will ask for password just one's after that fingerprint work fine till next reboot.

Obviously to make you remember your password and not forget it?
Sent from my SM-N910P using Tapatalk

anees02 said:
So what is the difference between OTA and the stock tar file I downloaded?
I need more info about these issues are they related to root or recovery?
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
There are a lot of differences between utilizing Odin and OTA. What differences are going to affect this issue in particular would take some research but doing things the "right" way sometimes takes longer in the short term but almost always saves headaches in the long run.
If I were you I would do some research on how Odin transfers, correlates and then installs data as opposed to the way its done via OTA. It would be a lot to type on here, but the way that I always think about it is this... Its always better to install stock software the stock method and then modify from a solid base rather than starting with potentially modified software, modified installation (there's a lot of room for error between someone extracting the data, uploading it, you downloading it, you placing it into Odin, transferring that data via USB to your phone, then the software actually installing) and then modifying on top of those modifications.... It's simple and complicated.
Sent from my SM-N910P using Tapatalk

samatagana said:
There are a lot of differences between utilizing Odin and OTA. What differences are going to affect this issue in particular would take some research but doing things the "right" way sometimes takes longer in the short term but almost always saves headaches in the long run.
If I were you I would do some research on how Odin transfers, correlates and then installs data as opposed to the way its done via OTA. It would be a lot to type on here, but the way that I always think about it is this... Its always better to install stock software the stock method and then modify from a solid base rather than starting with potentially modified software, modified installation (there's a lot of room for error between someone extracting the data, uploading it, you downloading it, you placing it into Odin, transferring that data via USB to your phone, then the software actually installing) and then modifying on top of those modifications.... It's simple and complicated.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
It will be a long jurney because I haven't got the OK1 tar file...I have to odin the OJ6 tar then take the OTA OK1.
After that I have to take the MM PC1 OTA.
All that with a limited bandwidth and internet speed of 1Mbps only.
So I'll wait until there will be a stable and good rom to flash.
Sent from my SM-N910P using Tapatalk

nismomax002 said:
I installed the OTA last night and turned on Ultra Power Saving Mode. I selected the option from the drag down menu to turn it off. I was prompted to select my launcher. I chose Google Now and a notification popped telling me Google Now is my default and how to change it. It is now stuck in black and white with my Google Now home screen but the only available settings are the same as if in Ultra Power Saving Mode. Please help.
Click to expand...
Click to collapse
Restart the device normally or restart it to safe mode and fix your issue.
Sent from my SM-N910P using Tapatalk

Can anyone send mms with the stock sms app? Mines says multimedia messages not supported by network!

jglm4u said:
Can anyone send mms with the stock sms app? Mines says multimedia messages not supported by network!
Click to expand...
Click to collapse
What about alternative message app.. Try another app and see if the issue still available?
Sent from my SM-N910P using Tapatalk

I'm not able to get 3g work!
I tried to restore efs partition through Twrp recovery and re odin the rom but with no success.
I checked 3g settings with DFS and everything seems to be ok!
Any ideas, please?
Sent from my SM-N910P using Tapatalk

Hi there! I have updated my Note 4 via OTA to 6.0.1. Just wanted to ask can I go back to 5.1.1 to gain back root and custom recovery for installing custom roms ?
Thanx

yellowrose75 said:
Hi there! I have updated my Note 4 via OTA to 6.0.1. Just wanted to ask can I go back to 5.1.1 to gain back root and custom recovery for installing custom roms ?
Thanx
Click to expand...
Click to collapse
You can easily get root and custom recovery without any problems in Marshmallow 6.0.1.
You don't have to go back to 5.1.1 to do these things.
Use chainfire Auto-Root to root.
And twrp recovery all from download mode.
Sent from my SM-N910P using Tapatalk

anees02 said:
You can easily get root and custom recovery without any problems in Marshmallow 6.0.1.
You don't have to go back to 5.1.1 to do these things.
Use chainfire Auto-Root to root.
And twrp recovery all from download mode.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Thanx Sana'a. I will try these and post results today.

yellowrose75 said:
Thanx Sana'a. I will try these and post results today.
Click to expand...
Click to collapse
I have rooted and installed twrp recovery successfully. Many thanx for that. However when I installed a custom rom namely "Emotion Rom MM R3" I lost my network and wifi had to restore backup. Any ideas ??

yellowrose75 said:
I have rooted and installed twrp recovery successfully. Many thanx for that. However when I installed a custom rom namely "Emotion Rom MM R3" I lost my network and wifi had to restore backup. Any ideas ??
Click to expand...
Click to collapse
In past I was more interested in custom roms.
But know I prefer Stock rooted roms.
So I didn't try any custom MM roms because until now all custom MM roms are beta and maybe not stable.
So wait until one of the developers releases a stable custom rom.
Sent from my SM-N910P using Tapatalk

Related

Official JB Update (w/ Link)

The official OTA link is http://d-h.st/3j0.
The update script checks for all the original .apks, .odexs, etc. Update fails when any of the original files are missing.
Sorry..not familiar with Moto..Gonna update wife's phone. What's the next step... Rename to update.zip and place in root of sdcard? Phone is stock not rooted.
Sent from my SCH-I535 using Tapatalk 2
caifan said:
Sorry..not familiar with Moto..Gonna update wife's phone. What's the next step... Rename to update.zip and place in root of sdcard? Phone is stock not rooted.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Correct.
Rename "Update.zip"
Place in root of sdcard "/mnt/external1/"
Reboot into recovery
-Shutdown
-Press Volume-Up and Power simultaneously until Motorola logo appears
-Press Volume-Up and Volume-Down simultaneously when you see the android with the ! from his open chest
-Scroll down to and select "Apply Update from External Storage"
-Scroll to and select "Update.zip"
-Grab a beer and wait
ThunderThief said:
Correct.
Rename "Update.zip"
Place in root of sdcard "/mnt/external1/"
Reboot into recovery
-Shutdown
-Press Volume-Up and Power simultaneously until Motorola logo appears
-Press Volume-Up and Volume-Down simultaneously when you see the android with the ! from his open chest
-Scroll down to and select "Apply Update from External Storage"
-Scroll to and select "Update.zip"
-Grab a beer and wait
Click to expand...
Click to collapse
dont even have to rename. just drop on sd and apple update. thanks for the upload OP.
Doesn't work if you are on the leak. Complains about build.prop not matching. Haven't tried changing it though...
Sent from my XT907 using xda app-developers app
So this is the official jelly bean update without any bugs or anything?
Sent from my XT907 using Tapatalk 2
sototallycarl said:
Doesn't work if you are on the leak. Complains about build.prop not matching. Haven't tried changing it though...
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Don't try. You got to sbf.
Sent from my XT907 using Tapatalk 2
Edit: Nope, no need for SBF on a Safestrap phone, just go back into Safestrap and uninstall the recovery.
I was getting a Status 7 failure from logwrapper but it does not require SBF to fix. Hooray!
Paramemetic said:
Edit: Nope, no need for SBF on a Safestrap phone, just go back into Safestrap and uninstall the recovery.
I was getting a Status 7 failure from logwrapper but it does not require SBF to fix. Hooray!
Click to expand...
Click to collapse
Did you uninstall any bloat apps? If so, did you restore a backup or is everything just working for you? I am rooted on JB leak and uninstalled many bloat apps and just trying to figure out what my next step is here. And what does SBF stand for? Sorry for the ignorance, never owned a locked bootloader phone before so this is all new lol.
00McD00 said:
Did you uninstall any bloat apps? If so, did you restore a backup or is everything just working for you? I am rooted on JB leak and uninstalled many bloat apps and just trying to figure out what my next step is here. And what does SBF stand for? Sorry for the ignorance, never owned a locked bootloader phone before so this is all new lol.
Click to expand...
Click to collapse
I only disabled bloat apps, didn't uninstall any. It checks to make sure all system apps are present (but not enabled). Your only option if you've uninstalled bloat apps using something like TiBu and if you've installed the JB leak is to revert to ICS factory image. SBF is "system boot file."
You're going to need to grab the ICS fastboot file from the dev forum and install it before either the OTA or this will work.
Root on its own is not a problem but if you have changed system apps (bloat is all "system") you'll need to do that.
If you installed safestrap that's fine, but you have to uninstall the recovery using the app before this will work because it checks the boot sequence.
Is the official update going to be worth it if we already have the leaked jellybean? All the sites I've read provide the same information regarding the new features for the update (all the same as the jellybean leak). If anyone has updated to the official jellybean from the leaked can you provide any information regarding the differences between the two
Confirmed working, and according to the Verizon PDF this official version has improved 4g reception as well as less drops on signal, improved WiFi and Bluetooth its running fine for me, going to try root and safe strap now
---------- Post added at 06:18 AM ---------- Previous post was at 06:07 AM ----------
Root not working which means safe strap is not working.... reverting back too old jb leak for the time being
Installed and working great.
OTARootkeeper backed up root then temp uninstalled root. Booted into stock recovery, flashed OTA from sd card, booted up, restored root, made sure entitlement_check was still set to "0"....tested stock hotspot app and works great.
Thanks OP for providing the link.
Can't wait for a non Verizon version of this. The RAZR M has to be my favorite android phone so far - great form factor and great hardware... just being stuck on ice cream sandwich is a bit **** but I'm prepared to wait
Sent from my XT905 using xda app-developers app
jarzy00 said:
So this is the official jelly bean update without any bugs or anything?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Yes, this is Verizon's official OTA. I haven't been running long so I will not comment much on stability. For the first few minutes one system app continuously force closed and restarted and the notification bar / soft keys disappeared. A reboot solved those problems.
got556 said:
Installed and working great.
OTARootkeeper backed up root then temp uninstalled root. Booted into stock recovery, flashed OTA from sd card, booted up, restored root, made sure entitlement_check was still set to "0"....tested stock hotspot app and works great.
Thanks OP for providing the link.
Click to expand...
Click to collapse
The SU binaries were deleted during my install, despite OTARootkeeper. However superuser responded to app requests giving the appearance of root.
And you are welcome.
ThunderThief said:
The SU binaries were deleted during my install, despite OTARootkeeper. However superuser responded to app requests giving the appearance of root.
And you are welcome.
Click to expand...
Click to collapse
Root checker stated I was rooted. May have to check again to make sure the binaries are still there. Will mess w/ her (g/f's) phone when she's done using it.
Just went back to Jellywiz from Paranoid on my S3 w/ some new radios we got leaked, so been busy setting all my crap back up.
Really hoping we can get Pimp My Rom on the M soon.
I also had no issues re-rooting with OTA Rootkeeper after manual update. I think I'm enjoying project butter the most!
If I install this like other people did with the leaked version, will I have any issues if there is ever another update?
techfellow said:
If I install this like other people did with the leaked version, will I have any issues if there is ever another update?
Click to expand...
Click to collapse
I don't think that will be a problem.

Ota update failed problem

Well here is the problem .
I was in the university when I noticed the latest update is available for n7100! so I started to download it with my 3g connection downloaded about 10 mb and I noticed that I dont have enough airtime credit left to download it so I canceled the download. When I got home I tried to download it with wifi connection and it says it's the latest update what do I do I want the update sooo bad
Can any one who installed the update give some info about the os version and new features ?
Is there a flashable file of the new rom?
" Don't tell me that was a false update message and there is no such thing for now my heart can't handle that "
Sent from my GT-N7100 using xda app-developers app
Well the problem solved looks like server side problems. I downloaded the update but I get failed message at 25% I'm on stock recovery and device status is normal! what's going on?
Sent from my GT-N7100 using xda app-developers app
Parsa-n7100 said:
Well the problem solved looks like server side problems. I downloaded the update but I get failed message at 25% I'm on stock recovery and device status is normal! what's going on?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
try connecting from KIES .
aukhan said:
try connecting from KIES .
Click to expand...
Click to collapse
can't do that 3000 mb of download my budget can't handle that ! can't i just find latest upgrade files and flash them through recovery or odin ?
There used to be the OTA files update only available on sammobile, however I don't know if they're available anymore or not.
Secondly, it's not possible to say what has been upgraded until we don't know on what version you were/are atm, and what will be the updated version.
And lastly, when you are doing things like this, you need to have an unlimited plan or something.
Sent from my GT-N7100 using Tapatalk 2
Take backup of important data and factory reset, it may solve issue. But you have to download update again and rarely I have experienced still fails to update. In such cases kies/odin only can solve.
Sent from my GT-N7100 using xda premium
I'm having the same issue. Phone declares it is modified when it reboots, so it is related to being rooted. Been investigating to no avail.
Have fiddles with triangle away settings and SuperSU's survival mode.
Finally got there. Unfroze all frozen apps with Titanium backup, uninstalled busybox, xposed framework etc - i.e. used option in app to remove from rom. Not sure which of these got it working.
Killed off my root, but CF autoroot again and all is good. New rom seems more responsive initially, will have to see about battery life etc in the long term.
Update: The wifi would not work after update. Flashed afresh using kies, and all sorted.
jujuburi said:
There used to be the OTA files update only available on sammobile, however I don't know if they're available anymore or not.
Secondly, it's not possible to say what has been upgraded until we don't know on what version you were/are atm, and what will be the updated version.
And lastly, when you are doing things like this, you need to have an unlimited plan or something.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
they are not available any more !!
dr.ketan said:
Take backup of important data and factory reset, it may solve issue. But you have to download update again and rarely I have experienced still fails to update. In such cases kies/odin only can solve.
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
i've already tried to factory reset and try to update "Didn't worked"!!!
my data plan is not going to allow me to download via kies if i could pause the download and resume it every night
i can use odin but first i have to find the file to flash!!
anewman said:
I'm having the same issue. Phone declares it is modified when it reboots, so it is related to being rooted. Been investigating to no avail.
Have fiddles with triangle away settings and SuperSU's survival mode.
Click to expand...
Click to collapse
device status is normal thats why i can download the update (it fails after the download when trying to install)!!
anewman said:
Finally got there. Unfroze all frozen apps with Titanium backup, uninstalled busybox, xposed framework etc - i.e. used option in app to remove from rom. Not sure which of these got it working.
Killed off my root, but CF autoroot again and all is good. New rom seems more responsive initially, will have to see about battery life etc in the long term.
Update: The wifi would not work after update. Flashed afresh using kies, and all sorted.
Click to expand...
Click to collapse
i only got Awesome Beats and
fully functional (all apps) multi window (the APK version)!! actually may be this one is causing the problem ??? after the factory reset the app is gone but i still got the full MW and i've got no idea how to get back to the stock one ?!! maybe i need a fresh rom !!

[Q] Failed Root Attempt. HELP!!!

Hi Guys,
So I have a Samsung Galaxy Note 2 that as of 5 hours ago was completely stock and running android 4.3 (the official one from AT&T). I got bored last night and decided I wanted to root my phone (something I hadn't yet done in the entire year I had my phone). So I looked up how to root, read the instructions all the way (I thought my research was complete). I rooted using the CF auto method. After doing that I flashed TWRP using ODIN. I also downloaded Titanium Backup, Rom Manager & My Backup Root. I tried to use all three of these applications to make a backup of my device so that I could flash the custom Rom I wanted without losing all my information. That is when my troubles began.
Whenever I tried to access any of these apps I got a pop up saying Unfortunately, SuperSU has stopped and a notification stating An attempt to access a secure area on your phone without authorization has been blocked. None of the apps would run either and just kept freezing or loading forever.Thinking I'd done something wrong I repeated the root process all over again. I still kept getting the same notifications though. I typed in the unauthorized access notification message into google and discovered about Knox. Doing some tinkering of my own I went to settings (more tab)>>security>>device administrators>> unchecked knox>>deactivate. After deactivating Knox I once again tried to gain root access and had no success. I followed the advice from previous threads and tried to change all Knox.apk files to knox.apk.bak using Explorer, I downloaded Android terminal and tried to delete knox via the command line su pm... That also did nothing. I went to the market and tried to download the SuperSU app by CHAINFIRE, it wouldn't work as it already says the app is installed but offers me no updating options. I also downloaded the Update SuperSU zip file and tried to flash it. My phone wont boot into recovery though so that hasn't gotten me anywhere. Downloaded Rom Manager and GooManager to try to get into recovery mode and still no success. later flashed philz_touch via ODIN as people who had similar problems had posted about it working for them. Didn't work for me. Flashed TWRP again using ODIN and am now just scratching my head trying to figure out how to fix this issue.
I'm personally not worried much about the warranty stuff but am more concerned with the fact that I can't root my phone. All I want is to be able to load a custom rom (MIUI v5) onto my phone. Any and all help would be greatly appreciated.... If you've seen someone else with an issue like mine please just redirect me to the proper thread then.
p.s. I also tried running the root verify app and it got stuck on a loading page.
When I power my phone off and boot into recovery mode (or whatever its called) my stats read as:
ODIN MODE
Product name: SGH-I317
Custom Binary Download: Yes (7 counts) - this is from all my attempts to reroot and flash different recoveries
Current Binary: Custom
System Status: Custom
Knox Warranty Void: 1
AP SWAEV: A2
Not sure if it matters but my phone still works fine and I can make and recieve calls, texts, etc so it doesn't seem like anything is "broken." Just no root access on a rooted phone.
Originally Posted by Ladyfinesse08
Thanks so much for your help. I tried doing what you said. When I go to SuperSU application under application manager it won't allow me to reomove it. All I can do is Turn it OFF. When If I go to the play market after turning it off the only option I get is to enable it again. Looking under App Info though it's showing that I'm on version 1.93 of SuperSu. I think from all the stuff I've been reading I'm supposed to be on version 1.95.
As for flashing it your TWRP I can't because I can't load into recovery mode with TWRP. The only thing thats working for me is ODIN. Not sure if there's a way to flash from ODIN or not but I personally don't know of one (I'm new to ODIN).
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
Here's a copy to flash in ODIN. If you can't boot into recovery after this, there are other things we can try from ODIN.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
Originally Posted by Ladyfinesse08
Thanks so much for your help. I tried doing what you said. When I go to SuperSU application under application manager it won't allow me to reomove it. All I can do is Turn it OFF. When If I go to the play market after turning it off the only option I get is to enable it again. Looking under App Info though it's showing that I'm on version 1.93 of SuperSu. I think from all the stuff I've been reading I'm supposed to be on version 1.95.
As for flashing it your TWRP I can't because I can't load into recovery mode with TWRP. The only thing thats working for me is ODIN. Not sure if there's a way to flash from ODIN or not but I personally don't know of one (I'm new to ODIN).
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
Here's a copy to flash in ODIN. If you can't boot into recovery after this, there are other things we can try from ODIN.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Fixed it. I was being special :angel:
Ladyfinesse08 said:
it's saying the file you've requested is not found. Do you have another link for the file or whats the name of it so I can search for it myself?
Click to expand...
Click to collapse
http://teamw.in/project/twrp2/124
Should be main TWRP ATT page
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 08:59 PM ---------- Previous post was at 08:47 PM ----------
Ladyfinesse08 said:
Fixed it. I was being special :angel:
Click to expand...
Click to collapse
fixed the link or completely whooped root's butt?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
http://teamw.in/project/twrp2/124
Should be main TWRP ATT page
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 08:59 PM ---------- Previous post was at 08:47 PM ----------
fixed the link or completely whooped root's butt?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the link. the tar file is the same one that I've been using though so not sure if it'll work or not. When flashing it should I still be under PDA or should I switch to phone, csc, etc?
Ladyfinesse08 said:
the link. the tar file is the same one that I've been using though so not sure if it'll work or not. When flashing it should I still be under PDA or should I switch to phone, csc, etc?
Click to expand...
Click to collapse
Yep PDA.
Which version of ODIN you using?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
v.3.07
Ladyfinesse08 said:
v.3.07
Click to expand...
Click to collapse
K. Should work.
2.6.3.0 will also.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:19 PM ---------- Previous post was at 09:16 PM ----------
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
Philz ClockWorkMod recovery
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I flashed the first recovery file but it still won't boot into recovery for me. When I try to boot into recovery it keeps taking me to the default recovery screen. Tried launching titantium backup and what not again and they're all still not working for me.
Got the philztouch one to flash. Still won't boot into custom recovery though.
Ladyfinesse08 said:
I flashed the first recovery file but it still won't boot into recovery for me. When I try to boot into recovery it keeps taking me to the default recovery screen. Tried launching titantium backup and what not again and they're all still not working for me.
Got the philztouch one to flash. Still won't boot into custom recovery though.
Click to expand...
Click to collapse
K. Try this. 69% sure it will work.
- Download from http://d-h.st/CDK
I317UCUBMK6-TZ-PARAM.zip
- Extract the .zip file to get to I317UCUBMK6-TZ-PARAM.tar.md5
- Put your Note 2 in Download Mode.
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Open ODIN and place the I317UCUBMK6-TZ.tar.md5 file in PDA and flash.
I know you know how to do all that's written there, I just copied and pasted from a post.
dicksteele said:
K. Try this. 69% sure it will work.
- Download from http://d-h.st/CDK
I317UCUBMK6-TZ-PARAM.zip
- Extract the .zip file to get to I317UCUBMK6-TZ-PARAM.tar.md5
- Put your Note 2 in Download Mode.
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Open ODIN and place the I317UCUBMK6-TZ.tar.md5 file in PDA and flash.
I know you know how to do all that's written there, I just copied and pasted from a post.
Click to expand...
Click to collapse
This didn't work for me either. Not sure exactly what's wrong with my note but I may just have to give up on gaining root access. maybe i'll try a different method to root.... I'm 100% sure I'm rooted though based on what the phone says when I boot into the default system recovery. Just don't understand why I can't gain root access and boot into custom recovery. Thank you for all your help though you've been an absolute doll. :angel:
Ladyfinesse08 said:
This didn't work for me either. Not sure exactly what's wrong with my note but I may just have to give up on gaining root access. maybe i'll try a different method to root.... I'm 100% sure I'm rooted though based on what the phone says when I boot into the default system recovery. Just don't understand why I can't gain root access and boot into custom recovery. Thank you for all your help though you've been an absolute doll. :angel:
Click to expand...
Click to collapse
No worries. I aim to please.
You aren't the first this has happened to. Just trying to remember what I did. I know what I did to fix it, I think it's this version though.
Download and try this one
http://d-h.st/OYC
It's the MK4 version of the earlier param/tz you tried.
That should have worked, clueless why it didn't.
...
ODIN this one, let it reboot back into ROM.
Power down, go into download mode and flash either one of the custom recoveries.
Let it reboot, power down, then try and go into recovery.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
No worries. I aim to please.
You aren't the first this has happened to. Just trying to remember what I did. I know what I did to fix it, I think it's this version though.
Download and try this one
http://d-h.st/OYC
It's the MK4 version of the earlier param/tz you tried.
That should have worked, clueless why it didn't.
...
ODIN this one, let it reboot back into ROM.
Power down, go into download mode and flash either one of the custom recoveries.
Let it reboot, power down, then try and go into recovery.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It seems my life has become a horrible case of Murphy's Law (as far as rooting this dang phone goes). So I used the 4.3param_tz.tar file that you posted previously. After being flashed via ODIN my phone automatically booted into Philz Touch recovery more. I initially decided that I was going to flash the SuperSU update then but decided to wait as I wanted to follow the instructions completely and flash TWRP instead. rebooted the phone. Turned it off again and booted back into recovery..... I was once again met with the default stock recovery (I thought my problems were solved and was already half way through writing a post to you confessing my love).
At this point I proceeded with some caution and tried to flash TWRP. Didn't work. ODIN/my phone kept getting stuck in recovery.img. Disconnected the phone after a couple minutes, pulled the battery and rebooted into stock recovery mode. Once again ODIN/my phone got stuck on recovery mode. Tried flashing 4.3param_tz.tar again and this time got stuck at param.bin.
Did some Google searching and people recommended re-installing the drivers, re-installed device drivers and rebooted into stock recovery mode. Went back to ODIN and flashed TWRP. It flashed completely and automatically rebooted the device. When I turned the device off again and tried to go to recovery mode I was again taken to the stock recovery mode page. tried to reflash 4.3param_tz.tar and it got stuck on param.bin again. Since then I've unplugged and rebooted into recovery mode countless times and tried flashing any and every thing and I keep getting stuck at either param.bin or recovery.img.
I have to go to class now so I'll probably come back sometime tonight and try to re-install the drivers and see if I can get param to flash again. If you give up completely I understand. The longer this takes the more convinced I am that it's a sign from above that I simply need to get my ass a new phone.
Ladyfinesse08 said:
It seems my life has become a horrible case of Murphy's Law (as far as rooting this dang phone goes). So I used the 4.3param_tz.tar file that you posted previously. After being flashed via ODIN my phone automatically booted into Philz Touch recovery more. I initially decided that I was going to flash the SuperSU update then but decided to wait as I wanted to follow the instructions completely and flash TWRP instead. rebooted the phone. Turned it off again and booted back into recovery..... I was once again met with the default stock recovery (I thought my problems were solved and was already half way through writing a post to you confessing my love).
At this point I proceeded with some caution and tried to flash TWRP. Didn't work. ODIN/my phone kept getting stuck in recovery.img. Disconnected the phone after a couple minutes, pulled the battery and rebooted into stock recovery mode. Once again ODIN/my phone got stuck on recovery mode. Tried flashing 4.3param_tz.tar again and this time got stuck at param.bin.
Did some Google searching and people recommended re-installing the drivers, re-installed device drivers and rebooted into stock recovery mode. Went back to ODIN and flashed TWRP. It flashed completely and automatically rebooted the device. When I turned the device off again and tried to go to recovery mode I was again taken to the stock recovery mode page. tried to reflash 4.3param_tz.tar and it got stuck on param.bin again. Since then I've unplugged and rebooted into recovery mode countless times and tried flashing any and every thing and I keep getting stuck at either param.bin or recovery.img.
I have to go to class now so I'll probably come back sometime tonight and try to re-install the drivers and see if I can get param to flash again. If you give up completely I understand. The longer this takes the more convinced I am that it's a sign from above that I simply need to get my ass a new phone.
Click to expand...
Click to collapse
Hmmm. Maybe it's my fault.
That's my last name for reals.
So the param/tz you flashed I previously posted, was the first one or second one?
Try flashing the first param.bin/tz.img combo.
Sorry for the run around.
My fault again. When i posted the Philz recovery I should have mentioned either one would have been fine.
For the custom recovery, it gets down to personal preference. Both versions are working fine. They both are touch. You are just going to have to play with both and see which one trips your trigger.
I'm getting lost where we are at.
Try flashing the original param file from the 4.3 OTA. Let's see if that completes successfully. Then we'll go from there.
I'm thinking
-Fix booting into stock recovery.
-Do chainfires CF-AUTOROOT in ODIN.
-Boot phone and try updating Supersu again
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I'm in the same boat this person is in, and i was about to open a new thread. I hope you don't mine joining in for help. My husband was a ninny and accepted the full OTA when I only told him to swap over his cards into the new warranty exchange we just got in. So I didn't know about it until I started trying to root and running into problems. I ran the TZ.tar.md5 file in Odin. I tried this little method here mentioned here: http://forum.xda-developers.com/showthread.php?p=50532028. I can't get anything to happen other than watching the flash counter go up. I just want root so i can restore his app with Rom Toolbox from his other phone...... This Knox thing is BS......
whitetiger_0603 said:
I'm in the same boat this person is in, and i was about to open a new thread. I hope you don't mine joining in for help. My husband was a ninny and accepted the full OTA when I only told him to swap over his cards into the new warranty exchange we just got in. So I didn't know about it until I started trying to root and running into problems. I ran the TZ.tar.md5 file in Odin. I tried this little method here mentioned here: http://forum.xda-developers.com/showthread.php?p=50532028. I can't get anything to happen other than watching the flash counter go up. I just want root so i can restore his app with Rom Toolbox from his other phone...... This Knox thing is BS......
Click to expand...
Click to collapse
A ninny. Something my wife has never called me I'll have to admit. Don't think she's ever considered that, I'll have to confirm that.
Back to work.... what does can't get anything else to work mean?
So what have you did? Any of the steps listed above?
We haven't heard from LadyF so assuming she's good to go. No reason to open another can't root thread.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
A ninny. Something my wife has never called me I'll have to admit. Don't think she's ever considered that, I'll have to confirm that.
Back to work.... what does can't get anything else to work mean?
So what have you did? Any of the steps listed above?
We haven't heard from LadyF so assuming she's good to go. No reason to open another can't root thread.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for getting back to me. I tried the CF Auto Root file in Odin. I tried just flashing a custom recovery so I could flash SU to gain root. Those are the 2 main things I remember trying..the rest is a late night blur. I was going to just try and flash one of the rooted stock roms, however, and this is kinda' sad, I don't remember which spot to place it in Odin.
whitetiger_0603 said:
Thanks for getting back to me. I tried the CF Auto Root file in Odin. I tried just flashing a custom recovery so I could flash SU to gain root. Those are the 2 main things I remember trying..the rest is a late night blur. I was going to just try and flash one of the rooted stock roms, however, and this is kinda' sad, I don't remember which spot to place it in Odin.
Click to expand...
Click to collapse
Just PM'd you all the goodies.
dicksteele said:
Just PM'd you all the goodies.
Click to expand...
Click to collapse
I appreciate your time helping me. Things are up and running.

New update causes no wifi

I just noticed an update on my t700 today. I installed it and after it rebooted it won't turn on wifi. It shows turning on but never actually turns on. Did a factory reset but didn't help. Shows build number KOT49H.T700XXU1ANK2
Has anyone else had this problem?
If I root and install a custom rom will I get wifi back?
Sent from my SM-N910V using Tapatalk
I'm running same rom on my and don't have issues. Try another obin flash.
Sent from my SM-T700 using XDA Free mobile app
This was Ota update. I'll have to figure out how to use Odin. I just bought this and the note 4. These are my first samsung products. Thanks
Sent from my SM-N910V using Tapatalk
Well reloaded firmware with no help. Still stuck with turning wifi on. Any other suggestions?
Sent from my SM-N910V using Tapatalk
tabocaw said:
Well reloaded firmware with no help. Still stuck with turning wifi on. Any other suggestions?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
I just updated without issue. Did you try a factory reset?
Yea I did a factory reset. I took it back to staples and exchanged it. I've only had it a week and after the Ota update the wifi wouldn't work. Now I'm afraid of updating the new one.
Sent from my SM-N910V using Tapatalk
tabocaw said:
Yea I did a factory reset. I took it back to staples and exchanged it. I've only had it a week and after the Ota update the wifi wouldn't work. Now I'm afraid of updating the new one.
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
no need to be afraid. update and enjoy. you had an unusual hiccup and enjoy!
I'm doing it now. Thanks for the help.
Sent from my SM-N910V using Tapatalk
I updated five days ago using the odin file from the samsung-update site. Didn't have any wifi issues until today. When I reboot, wifi is on but it doesn't remember my saved networks or wifi passwords. I just did another odin this evening but this forum isn't giving me any hope for success.
runner77 said:
I updated five days ago using the odin file from the samsung-update site. Didn't have any wifi issues until today. When I reboot, wifi is on but it doesn't remember my saved networks or wifi passwords. I just did another odin this evening but this forum isn't giving me any hope for success.
Click to expand...
Click to collapse
i would ODIN back to the previous version then take the update via OTA. if it were me.
runner77 said:
I updated five days ago using the odin file from the samsung-update site. Didn't have any wifi issues until today. When I reboot, wifi is on but it doesn't remember my saved networks or wifi passwords. I just did another odin this evening but this forum isn't giving me any hope for success.
Click to expand...
Click to collapse
Flashing ANY stock kernel (signed boot.img) will wipe your WIFI passwords and settings. The stock kernel may be included in the OTA or within the full firmware package.
This is normal and not an "issue". If you are not rooted, you just need to enter again, with root you are able to restore settings easily (if backed up).
UpInTheAir said:
Flashing ANY stock kernel (signed boot.img) will wipe your WIFI passwords and settings. The stock kernel may be included in the OTA or within the full firmware package.
This is normal and not an "issue". If you are not rooted, you just need to enter again, with root you are able to restore settings easily (if backed up).
Click to expand...
Click to collapse
I understand.
However, I ODIN'd the latest NK2 (wiped everything) earlier this week, re-setup my phone including wifi passwords and everything was running great until I rebooted yesterday. For whatever reason, the phone stopped remembering my saved networks after reboots.

[Q] Boot loop help!

Hi I'm a long time lurker but first time poster as I desperately need help. My S6 Edge is currently stuck in a boot loop after enabling ultra power saving mode then trying to rest my phone. My phone is rooted with the stock rom and stock recovery. If anything would there be any way I could backup up my data in download or recovery mode? Thanks in advance.
Sergieo said:
Hi I'm a long time lurker but first time poster as I desperately need help. My S6 Edge is currently stuck in a boot loop after enabling ultra power saving mode then trying to rest my phone. My phone is rooted with the stock rom and stock recovery. If anything would there be any way I could backup up my data in download or recovery mode? Thanks in advance.
Click to expand...
Click to collapse
Just flash the stock odin file you'll find in these forums..
Sunderwear said:
Just flash the stock odin file you'll find in these forums..
Click to expand...
Click to collapse
Will flashing the stock firmware cause me to lose the date currently on the phone or lose root?
Yes all your data will be gone
Sent from my SM-G925I using XDA Free mobile app
Sunderwear said:
Yes all your data will be gone
Sent from my SM-G925I using XDA Free mobile app
Click to expand...
Click to collapse
That's what I'm trying to avoid. If I must flash stock firmware is there any way I can backup my data first such as making an nandroid, Samsung smart switch, or adb?
Sunderwear said:
Yes all your data will be gone
Sent from my SM-G925I using XDA Free mobile app
Click to expand...
Click to collapse
Actually, I've been able to flash the stock firmware plenty of times without losing anything in the Data partition.
However, I make no guarantees. Generally, to set clear expectations, I just tell everyone the same thing: "Flashing anything to your device by any means will brick your device." If, for some reason, you manage to achieve results better than this, then congratulations. ... or something along these lines. >_<
But yeah, caveats aside, I've flashed the OCG stock and new OF6 firmwares via odin, never once has it broken or wiped my Data partition.
And, of course, once you flash the OF6 firmware, you'll be stuck on 5.1.1 without root or custom recovery. At least for now.

Categories

Resources