Develop Bugs

Returning to stock from ICS w/root.

I tried searching for the answer but didn't find anything. Sorry if I missed a sticky on this!
Otherwise, just as thread states - need to return to stock before going to the sprint store. Everything is backed up but I can't seem to find the stock odin files to flash. I do NOT have CWM or a custom bootloader, just currently running FD26 ICS with root. A total wipe would be fine. This would be a return to stock sprint 2.3.x or whatever sprint has out now.
Thanks in advance!

You need this http://forum.xda-developers.com/showthread.php?p=21134991
After that, if you need to unroot, look for sfhub's auto root tool (think its in the development sticky) and run the unroot option.
Both together will achieve an out of the box state
Sent from my SPH-D710 using Tapatalk 2

The latest official kernel/modem is EL29. As you've already flashed a custom ROM, I know you're familiar with how to do it, but here is the thread with the download and instructions anyways =)
*note - this IS rooted, but sprint doesn't care if you root your phone--as long as kernal/ROM/modem are stock ^_~
http://forum.xda-developers.com/showthread.php?t=1433101

tkemack said:
You need this http://forum.xda-developers.com/showthread.php?p=21134991
After that, if you need to unroot, look for sfhub's auto root tool (think its in the development sticky) and run the unroot option.
Both together will achieve an out of the box state
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
I tried this method - using el29 restore - rooted but all I get is fail message. It hangs at "setup connection" as follows:
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016>
<OSM> All threads completed. (succeed 0 / failed 1)
This is the result of pressing "start" in odin after getting a yellow com. All drivers are installed correctly as far as I know.
EDIT: I have now tried this from 2 computers, same result. Fail notice after setupconnection. Both times were using the stock cable that came with the phone.
EDIT 2: Using another aftermarket monoprice ferrite core cable made no difference. Continuing to get fail notice.

Just as an update I have now verified that the USB mode is set to AP, and I have all windows drivers installed correctly on both of my computers. Still unable to get a connection. In addition I have tried it in both usb debugging ON mode and OFF, with still no success. Anything I may still be doing wrong?

You are putting the phone into download mode first before plugging it into the computer right? Holding volume down and power buttons do this, hold them till you see the warning screen, then hit volume up to go into download mode.

lawr0155 said:
You are putting the phone into download mode first before plugging it into the computer right? Holding volume down and power buttons do this, hold them till you see the warning screen, then hit volume up to go into download mode.
Click to expand...
Click to collapse
Yes, absolutely. Odin gets a yellow com just fine too, it just doesn't setup the connection.

I'm not saying to do it but what about this idea? Somehow, with my thought, you have to get the modem back to EL29. You might (don't know haven't tried) be able to mobile Odin everything else. Make sure you get mobile Odin and the flashkernel d710 apk installed first. Just a suggestion....

Well can you not return to GB stock after running an ICS ROM using the odin method? I haven't seen any threads about it.

Give this a try...
http://forum.xda-developers.com/showthread.php?t=1678631
IMO the easiest way to get back to 100% Stock EL29 without root.

Drumrocker said:
Give this a try...
http://forum.xda-developers.com/showthread.php?t=1678631
IMO the easiest way to get back to 100% Stock EL29 without root.
Click to expand...
Click to collapse
File that is linked there is now gone
Man this is not going my way at all...

Okay, I got it flashing finally. For some reason my drivers were somehow in some way not correct. I opened kies and it it did the 6/6 (today's) update and then started updating my drivers. After that odin was finally able to start the flash setup. Who knows?
Well its working now.

If you aren't concerned with what version of stock you are on, you can also look on the EK02 ODIN OneClick thread. That ROM is pure stock and not rooted. If you can't use the OneClick, in the 2nd post there is a tar.md5 version.

Please help!!!!!! Urgent!!

Hi guys im in a little bit of trouble here, i just did an odin flash of the 4.0.4 stock version but something in the process went wrong and now my phone its dead it doesnt do anything, it wont turn on, wont go to recovery, when i plug in it to my computer its start to search for the drivers but then it gives me the error of not founding the driver :'( what can i do guys??? this is really a bad day for me, and i think i just got out of the warranty days =( Any help??

daworship said:
Hi guys im in a little bit of trouble here, i just did an odin flash of the 4.0.4 stock version but something in the process went wrong and now my phone its dead it doesnt do anything, it wont turn on, wont go to recovery, when i plug in it to my computer its start to search for the drivers but then it gives me the error of not founding the driver :'( what can i do guys??? this is really a bad day for me, and i think i just got out of the warranty days =( Any help??
Click to expand...
Click to collapse
ok download the samsung driver then put you device in download mode and star againg with the upgrate

ipodnatic said:
ok download the samsung driver then put you device in download mode and star againg with the upgrate
Click to expand...
Click to collapse
i have a samsung driver install already the kies program did it. so uninstall that one and search for a new one?

If it doesn't do anything at all NOTHING, it's probably bricked unfortunately..Sorry Iv'e done it before i feel your panic!!

Danilynne said:
If it doesn't do anything at all NOTHING, it's probably bricked unfortunately..Sorry Iv'e done it before i feel your panic!!
Click to expand...
Click to collapse
:crying: Im going to see what i can do, if nothing happends, ill go to the tmobile store to see if they can give me a new one cause im a little confused i dont remember if the warranty period is 15 days or 30 days.

daworship said:
:crying: Im going to see what i can do, if nothing happends, ill go to the tmobile store to see if they can give me a new one cause im a little confused i dont remember if the warranty period is 15 days or 30 days.
Click to expand...
Click to collapse
I had insurance on mine with tmobile. I just told them it died and i didn't know why:angel: i paid $5 for a new one they mailed it to me in a day..goodluck!!

Update!!! Can someone tell me!!
So here i am i did a lot of research and found the QHSUSB_DLOAD driver and install it to my computer, and now odin recognizes my phone but the phone itself wont turn on like a normal download mode screen im just starting to try and see if i can make a new flash but im stuck at this....
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVLDE_HOME_SGH-T989user_CL930912_REV00.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
And now it doesnt do anything.

daworship said:
So here i am i did a lot of research and found the QHSUSB_DLOAD driver and install it to my computer, and now odin recognizes my phone but the phone itself wont turn on like a normal download mode screen im just starting to try and see if i can make a new flash but im stuck at this....
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T989UVLDE_HOME_SGH-T989user_CL930912_REV00.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
And now it doesnt do anything.
Click to expand...
Click to collapse
Try rebooting the computer that you are using ODIN on, others are also talking about removing the battery, then going back into download mode: http://forum.samdroid.net/f28/stuck-setup-connection-odin-1990/
EDIT: I had this kind of hanging issue happen to me two days ago and I was scared to unplug for fear of brick. Whatever you do, be aware that your phone might be bricked if you unplug it.

skadude66 said:
Try rebooting the computer that you are using ODIN on, others are also talking about removing the battery, then going back into download mode: http://forum.samdroid.net/f28/stuck-setup-connection-odin-1990/
EDIT: I had this kind of hanging issue happen to me two days ago and I was scared to unplug for fear of brick. Whatever you do, be aware that your phone might be bricked if you unplug it.
Click to expand...
Click to collapse
OK im following every step they are saying on that post, but where is the "debug only" option??? im lost on that :/
I have on my computer odin 1.85, 1.87, 3.04, 3.07 but i dont see the "debug only" option =S im so upset!! jeje

daworship said:
OK im following every step they are saying on that post, but where is the "debug only" option??? im lost on that :/
I have on my computer odin 1.85, 1.87, 3.04, 3.07 but i dont see the "debug only" option =S im so upset!! jeje
Click to expand...
Click to collapse
Did you restart the computer? Did you try on another computer? Have you tried booting into download mode after taking the battery out?

skadude66 said:
Did you restart the computer? Did you try on another computer? Have you tried booting into download mode after taking the battery out?
Click to expand...
Click to collapse
Yes, The phone itself doesnt show the image of the android and the download mode, but Odin says its connected to the port and says Added! When i press the start button to flash no matter what version of Odin im using or what computer of my house im in. It always get stuck on SetupConnection..

daworship said:
Yes, The phone itself doesnt show the image of the android and the download mode, but Odin says its connected to the port and says Added! When i press the start button to flash no matter what version of Odin im using or what computer of my house im in. It always get stuck on SetupConnection..
Click to expand...
Click to collapse
Hmmm, then I'm not sure what else you can try.. Sorry :/
Sent from my Samsung SGH-T989D using xda premium

[Q] Sudden half death in Samsung N7100

I have rooted my phone. Working without any problem for past 1 year. Recently it started showing that the space was becoming limited .
Anyways, I didn't have time to look into it so I kind of nudged it off.
Well today someone called me and it got stuck, I couldn't accept/deny the call and my phone kept ringing in a loop (way longer than a phone should) so I pulled the battery. When I put the battery back in, my phone started up as a full white screen with black lines all over it (as if the screen was cracked.) Since then I have not been able to access anything except Odin (vol. down + home + power).
I cannot access CWM, do not ever see the samsung logo, only able to see this If I press down (to restart) the phone gets stuck.
Now I installed a few things such as the stock firmware, the pit file, the MD5 tar file for PDA. I went into Odin v1.85 and v3.0 on PC and tried flashing the stock firmware but that did not work out as it kept giving me
although i searched th forum but couldn't find the solution to it.
Please help

Did u tried flashing stock rom?nd wat bout chip?is it sane or insane?
Sent from my AweSoMe ☆♥Note2♥☆

Omg..everytime my apps are updating..its giving me the limited space notif. Should i be worried too? I have a sane chip btw.
And about ur phone..wat rom were u on?
Sent from my GT-N7100 using xda app-developers app

not responding to odin
mannyvinny said:
Did u tried flashing stock rom?nd wat bout chip?is it sane or insane?
Sent from my AweSoMe ☆♥Note2♥☆
Click to expand...
Click to collapse
only the stck rom was installed. i have never tried any custom ROM.
But now it is stuck on white lines. and only goes to odin mode (vol down+power+home). and not getting in restore mode (vol up+home+power).
i have tried flashing the original Stock ROM. Odin gave the following error
OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SGHT889V.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialization..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Original board
naeem86 said:
Omg..everytime my apps are updating..its giving me the limited space notif. Should i be worried too? I have a sane chip btw.
And about ur phone..wat rom were u on?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
i was on stock ROM. And i don't know about the chip sane or insane. it is indian verssion of Note 2 (N7100).
now stuck at those white lines and not responding to even odin.
Guys please help to connect it to odin.

navdeepmasaun said:
i was on stock ROM. And i don't know about the chip sane or insane. it is indian verssion of Note 2 (N7100).
now stuck at those white lines and not responding to even odin.
Guys please help to connect it to odin.
Click to expand...
Click to collapse
<OSM> SGHT889V.tar.md5 ------ SGHT889V i don't think is really a n7100

Unless ur on tmobile note2 I think u chose wrong firmware.
Sent from my GT-N7100 using Tapatalk 4

original firmware
vash_h said:
Unless ur on tmobile note2 I think u chose wrong firmware.
Sent from my GT-N7100 using Tapatalk 4
Click to expand...
Click to collapse
i tried original Indian version of firmware of N7100, but same results
N7100XXDMG1_ODDDMG1_India_Android_4.1.2

Did you tick the repartition option in Odin? If yes, are you sure the ROM you are trying to flash needs that?
Sent from my GT-N7100 using xda app-developers app

@Nadeepmasaun
navdeepmasaun said:
i tried original Indian version of firmware of N7100, but same results
N7100XXDMG1_ODDDMG1_India_Android_4.1.2
Click to expand...
Click to collapse
"Bhai tera phone N7100 nahi Hai , thats why its giving you error , and Now you must look firmware for "T-mobile "
but were you bought This phone .? Gaffar Market
GT-n7100 is international and Tmobile is SGHT889V
Try to find Currect rom or Model Number :good:

djmax81 said:
"Bhai tera phone N7100 nahi Hai , thats why its giving you error , and Now you must look firmware for "T-mobile "
but were you bought This phone .? Gaffar Market
GT-n7100 is international and Tmobile is SGHT889V
Try to find Currect rom or Model Number :good:
Click to expand...
Click to collapse
Palika bazaar
Magar ye India me kaha available hai? @navdeepmasaun Go to settings-about device and check the 'Model Number'.. m sure its not N7100
Sent from my AweSoMe ?♥Note2♥?

Had something similar with my N2. First more and more random freezes until I tried to reflash complete stock to see if that solved the problem. I ended up with the same issue as you and I could only solve it by having the service point replace the main board. I know that earlier tests showed I had a problem MMC chip. The new mainboard test shows I have a sane chip. Good luck!
Sent from my GT-N7100 using xda app-developers app

model Number
mannyvinny said:
Palika bazaar
Magar ye India me kaha available hai? @navdeepmasaun Go to settings-about device and check the 'Model Number'.. m sure its not N7100
Sent from my AweSoMe ?♥Note2♥?
Click to expand...
Click to collapse
when it used to start at start-up logo it showed N7100. even in Settings it showed N7100. i bought it second hand year back.
problem is that it showed this syndrome when it was placed idle after a call. And suddenly stopped responding with white lines and only going in download mode and not letting me in recovery mode.
you guys are talking about flashing. Nothing has been flashed earlier, but although it was rooted.
ya after this problem, i tried to flash this one with Rom, without any success.
But now i have downloaded the original Stock rom also, and will try to update with that. and let you know about this.
i have given my phone to some local service center, lets see what they say.....

mannyvinny said:
Palika bazaar
Magar ye India me kaha available hai? @navdeepmasaun Go to settings-about device and check the 'Model Number'.. m sure its not N7100
Sent from my AweSoMe ?♥Note2♥?
Click to expand...
Click to collapse
+1 guess he probably ...bought it gray market n lagtaa hai Tmobile chipka diaa....coz most of the people get it to india even contract phones too illegally. at gaffar...to sell....
Nvr mind but it make me feel too its not n7100 ...not matter of brick or insane chip ...been using pc odin since ages
Sent from my GT-N7100 using XDA Premium 4 mobile app

alright
navdeepmasaun said:
when it used to start at start-up logo it showed N7100. even in Settings it showed N7100. i bought it second hand year back.
problem is that it showed this syndrome when it was placed idle after a call. And suddenly stopped responding with white lines and only going in download mode and not letting me in recovery mode.
you guys are talking about flashing. Nothing has been flashed earlier, but although it was rooted.
ya after this problem, i tried to flash this one with Rom, without any success.
But now i have downloaded the original Stock rom also, and will try to update with that. and let you know about this.
i have given my phone to some local service center, lets see what they say.....
Click to expand...
Click to collapse
hope for the best bro .!!!

djmax81 said:
+1 guess he probably ...bought it gray market n lagtaa hai Tmobile chipka diaa....coz most of the people get it to india even contract phones too illegally. at gaffar...to sell....
Nvr mind but it make me feel too its not n7100 ...not matter of brick or insane chip ...been using pc odin since ages
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
whether it is Tmobile or GT-N7100 doesn't matter. i want to know how to get it in restore mode or connect with odin.

have tried samsung latest drivers .?
navdeepmasaun said:
whether it is Tmobile or GT-N7100 doesn't matter. i want to know how to get it in restore mode or connect with odin.
Click to expand...
Click to collapse
did u update ... samsung usb drivers .?

How can i check it?

[Q] Just bricked my phone on 4.3

UPDATE** Resolved problem.
Hey guys,
I accidentally bricked my tmobile GS4.. I can't seem to get it back and running again. I've been using Odin3 v1.85 and the tmobile 4.3 stock rom. I put it in download mode, click "PDA" and try to flash the stock rom and I get this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> M919UVUEMK2_M919TMBEMK2_M919UVUEMK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
I'm worried now that I won't be able to get it back up and running again and that I've just blown through my warranty because of that whole knox deal.
Please help!
BTW - I download the stock rom that was in this forum for tmobile another member posted stating it was 4.3. Due to my post count I can't link yet, but the file name is M919UVUEMK2_M919TMBEMK2_TMB.zip

Try a newer version of Odin. Try 3.07 or 3.09
Are you using the original cable?
☞ Sent from here☜???

I've had this issue where Odin will repeatedly say Added, Removed, and then Added again. However, that normally happens when I've inserted it into a pc for the first time. Perhaps Windows was installing drivers and caused Odin to redetect the device midway through flashing. @OP, is this the first time you plugged your GS4 in Download Mode on the computer

baseballfanz said:
Try a newer version of Odin. Try 3.07 or 3.09
Are you using the original cable?
I've tried Odin3 V3.07 as well. Maybe I'll try 3.09 too?
Yes, I'm using the original cable.
☞ Sent from here☜???
Click to expand...
Click to collapse
Vigz said:
I've had this issue where Odin will repeatedly say Added, Removed, and then Added again. However, that normally happens when I've inserted it into a pc for the first time. Perhaps Windows was installing drivers and caused Odin to redetect the device midway through flashing. @OP, is this the first time you plugged your GS4 in Download Mode on the computer
Click to expand...
Click to collapse
No, it is not the first time :/ I'm starting to really worry now that I won't have my phone working by tomorrow for work :s
I'm really hoping I can get this thing up and running again. I think it all happened when I tried to install a zip to root my phone via CWM recovery. It was an old one for 4.2.2 and I'm not sure if it caused my phone to brick because I forgot I did an OTA update to 4.3.
Thanks for the help so far guys, Please keep it coming.

Fixed
Well, I'm feeling pretty stupid right now.. it WAS the cable. I wiggled it around I guess and there must be a short in it because it made another connection on my PC.
I got a different cable and, boom, headshot. She works now.
Thanks for all your help guys!

Wicked White said:
Well, I'm feeling pretty stupid right now.. it WAS the cable. I wiggled it around I guess and there must be a short in it because it made another connection on my PC.
I got a different cable and, boom, headshot. She works now.
Thanks for all your help guys!
Click to expand...
Click to collapse
Samsung cables just suck. They've had issues since day one. If you ever have issues with kies or Odin always try a different cable first. 95% of the time it's the stupid cable at fault.
Sent from my SGH-M919 using Tapatalk

Wicked White said:
Well, I'm feeling pretty stupid right now.. it WAS the cable. I wiggled it around I guess and there must be a short in it because it made another connection on my PC.
I got a different cable and, boom, headshot. She works now.
Thanks for all your help guys!
Click to expand...
Click to collapse
Yeah, mine is really flimsy too. I try not to move the cable when it's plugged in because I'm too cheap of a bastard to get new ones. Hue.

Who has the best cables?
Sent from my GT-I9505G using xda app-developers app

Lmax579 said:
Who has the best cables?
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
AmazonBasics is a good brand.

I've been using the cable from a ridiculously priced charger I had to buy at the Best Buy kiosk at the Airport made by iGO. It's a lot thicker cable then most and the micro USB really snaps firmly into the phone.
Sent from my SGH-M919 using Tapatalk

[Q] n7100 bricked/loop please help tried all sorts

hey im really sorry if ive missed a fix on the forums i have searched for days now and its driving me insane eyes stinging :/ OK basically Ive had custom roms and firmware running for some time now but few days ago during normal phone use it froze i restarted it and it stuck in boot loop, tried several times and the same so tried to flash new firmware specifically 4.3 from sammobile i am in the UK and on the Vodafone network. using Odin it pretty much gets to the end of the process then fails ive done this many many times and each time fail using different firmware ive read to clear the cache but i cannot access recovery mode either... :/ and in download mode it does state the model name so im hoping the hard drive is all good if anyone has any advice or can point me in the correct direction id be very very greatfull because id much rather prefer to try fix this my self than have to take somewhere else im actually gutted ive lost all my photos ect... but hey i understand thats the risk of modding.. oh ive also tried using many different versions of Odin if that makes a difference but all fail the same. Ive read that maybe to flash the PIT file but again im not sure if i can find the correct file for my phone.... im going bald very fast

quick update i tried again a different firmware being another latest 4.3 via odin 309
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
was the resuts it finished the process which is a first.. but is now stuck on boot screen being the samsung galaxy note II gt-n7100 screen not the blue samsung screen
so please any further help would be great

grrr... ok so now i tried to flash the CWR mod to see if that would fix the recovery mode problem.. this didnt work so tried the Philz recover flash...... this again didnt work now it entered download mode once and the product name was blank.... reset again and now wont even go into download mode screen just black .......... this is driving me insane please help guys there must be a complete way to start from scratch im willing to try anything... even a hammer if it comes to it

Only thing I can think of is flashing recovery firmware with pit. I'd try ms kip toolkit from here. It helped someone else in a similar position
http://www.skipsoft.net/
Sent from my GT-N7105 using XDA Premium 4 mobile app

read this thread, hope can fix your problem.. http://forum.xda-developers.com/showthread.php?t=2154890
if not, maybe your device already got half sds..

thanks for the replys wish i knew about them links earlier as now i cant even turn the fone on to access download mode... any ideas where to go from here ? much appreciated

really hoping theres another option than having to send away for jtag flash.... i did see some where some one fix a hard bricked phone with a USB drive inserted into the bottom which accesed download mode.. is this real ? and if so then what was the software on the USB that did this im very curious to know

hmm ok after much more reading ive realised the usb is actually a jig which i should of probably known... anyway.. going to find instructions on this see if i can actually make one to force download mode or if anyone has any guide to this as i do have access to probably all the components needed id be very great full if i manage to sort this id be happy to re post the details

ok now the home made jig worked back to download mode although no product name is showing and when i try to flash firmware says no partition so ive tried to flash pit and re partition but this fails ... :/ please any help would be massively appreciated

What did mskips toolkit say? I think it has a firmware rescue option
Sent from my GT-N7105 using XDA Premium 4 mobile app

sawdoctor said:
What did mskips toolkit say? I think it has a firmware rescue option
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well il be honest the link leads to nexus things so i wasnt actually shure what to do there with them links if you could maybe explain it a little that would be amazing

ahh sorry i found the links for the samsung didnt read correctly its been a long day.... and the link on that site is broken for the download... but it appears i already have this toolkit but it doesnt detect the phone maybe i need to read more on how to use it better first

crasherkid said:
ahh sorry i found the links for the samsung didnt read correctly its been a long day.... and the link on that site is broken for the download... but it appears i already have this toolkit but it doesnt detect the phone maybe i need to read more on how to use it better first
Click to expand...
Click to collapse
I know the toolkit needs the Samsung drivers installed. If they are installed and it doesn’t recognise the phone it's either a faulty USB lead or I'm out of ideas
Sent from my GT-N7105 using XDA Premium 4 mobile app

same problem
hi i have same problem ,any idea how fix
i have download mode -vol down-home button - power
also recovery ,but in recovery i have more errors
MANUAL MODE
APPLIED THE CSC-CODE :UNKNOWN
E:FAILED TO MOUNT /SYSTEM (INVALID ARGUMENT)
CAN'T MOUNT /SYSTEM(INVALID ARGUMENT)
SAME WITH DATA,CACHE
SOMEONE HELP