I have a USB beard trimmer. It works with usb charger directly (not rechargeable ).
When i inserted it in my HTC 816 otg my mobile screen gone blue then restarted. Now my mobile does not support any otg but i can charge my mobile as well as it is detected by computer but otg doesn't work at all. Pls help
Related
does anyone have experience of an otg cable that will charge phone whilst connected?
I have just received 3rd ebay item from China that purports to do so but fails
http://pages.ebay.com/link/?nav=item.view&id=221225352773
would really like to be able to use hox for more than an hour whilst is plugged into my storage.
cheers
Simon
Sent from my HTC One X using xda app-developers app
Have you tried it with a usb pen connected. I think it won't charge when no usb device is connected.
I believe its not possible to charge while using otg mode, as the phone's charging capability is blocked to enable otg. Im not sure if charging through pogo pins will work or not, but it should.
And I believe power part of the cable you purchased is for external power to your USB device, like a 2.5" external HD.
Hello, i am trying to connect and control my dslr camera with my hox and DSLR Controller app.I bought an OTG cable which is female to mini(not micro), i connect the otg cable to the my dslr and my hox to the standart micro usb cable,which then goes in the female port of the OTG cable,but nothing realy happens.I am running ARHD 9.7.2 (in the official website it is written that i require android 4.1,which means that my rom is ok),later i tried using Maximus rom but still nothing happens.
Am i doing something wrong there ? It runs ok on my tablet (i don't use OTG here).
[email protected] said:
Hello, i am trying to connect and control my dslr camera with my hox and DSLR Controller app.I bought an OTG cable which is female to mini(not micro), i connect the otg cable to the my dslr and my hox to the standart micro usb cable,which then goes in the female port of the OTG cable,but nothing realy happens.I am running ARHD 9.7.2 (in the official website it is written that i require android 4.1,which means that my rom is ok),later i tried using Maximus rom but still nothing happens.
Am i doing something wrong there ? It runs ok on my tablet (i don't use OTG here).
Click to expand...
Click to collapse
have you enabled usb debugging ?
order insicpa
Yes USB debuging is enabled,but nothing is working.Is it possible that the otg cable is the problem? I am using a Mini otg ,not micro!
Would someone with a TabPro 10.1 please answer the following charging questions?
How long does this tablet take to fully charge from 25% or less charge?
If you attach a micoUSB OTG cable to a powered USB hub will the tablet still charge while using a device (USB harddrive, SDCard reader ... etc) that is also attached to the powered USB hub?
Can a microUSB OTG Y Cable concurrently charge from the standard USB charger and run an OTG USB device (e.g. SD card reader)?
I'm asking as I currently use a Nexus 10 attached to a powered hub with a USB ethernet adapter attached. Unfortunitely the Nexus 10 does not utilize the charge provided by the powered USB hub and looses charge. In this set up the powered hub only helps to power the Ethernet adapter so overall the Nexus 10 does not discharge due to the Ethernet adapter. I am hoping the TabPro 10.1 has a better charging implementation than the Nexus 10.
FYI: The Nexus 10 will not charge from its pogo connector when the micoUSB port is being used for charging or with an OTG device. The charging notification falsely indicates the device is charging.
Thanks for anyones insights.
I would like to know this too. I've purchased and the Note 10.1 2014 and this is the only issue I have with it is the lack of support for charging and USB OTG use. If the Tab Pro 10.1 or even 8.4 can charge with OTG I may exchange the Note. Thanks!
I just tried an OTG Y cable, it wont charge. I also tried a trick that worked on my lenovo windows 8 tablet where you turn the tablet off, turn it on with charger in, rip out the charger and plug in the OTG cable before it fully boots and then connect the charger to the OTG cable which allowed OTG+Power, didn't work on the tab.
IIRC this is something that can only be changed by a kernel modification as I think the old 2012 Nexus 7 could do this with a custom kernel, but I could never find a working download.
EDIT: Tried on my Tab Pro 8.4 running latest CM nightly
my micro usb cable's port dropped into water, as after 15 min of drying it when to connect it to my cell with my pc, firstly my cell switched off, after switching on it only charges my cell, no mtp mode is coming, no usb degguging is getting on, do anyone knows isnt my cells usb port had gone wrong or my usb cable's one ? plz rply fast !
I would say the copper in your cable is rusty, so data transfer probably couldn't be done since data transfer need more ideal conditions than normal charging
Sent from my C6502 using XDA Free mobile app
hi,
because the sixaxis bluetooth app is broken on marshmallow, I found another app which works if I connect the phone with an usb cable.
but because a normal otg + mini usb is too long, I bought this one http://www.dx.com/p/mini-usb-male-to-micro-usb-male-retractable-data-cable-black-150021 .
unfortunately it doesn't work. is it because it's not marked as a otg cable?
would http://www.ebay.com/itm/4-10cm-Micr...e-B-male-Host-OTG-Adapter-Cable-/131629479801 work?
The first link is not an OTG cable. See the comments.
The second one states OTG and looks like mine.
I checked a tutorial for solding the 4. and 5. pin together, my father did it for me and now it function as an otg cable.