Related
##PLEASE NOTE##
These files are from Motorola's Development site and I take no liability with anything that happens with your device if something goes wrong.
DO NOT ATTEMPT TO FLASH THIS FILE ON ANYTHING BUT THE VERIZON WIRELESS MOTOROLA XOOM Z600 (3G MODEL) OR YOU WILL HAVE A SHINEY PAPER WEIGHT!!!!
Click to expand...
Click to collapse
You're going to need to have the Android SDK installed. You can download it here:
ANDROID SDK - DOWNLOAD
XOOM Firmware Downloads:
[3G|MZ600-HRI66]
[4G|MZ602-HLK75D]
Unzip the files in MZ600_HRI66.zip and move or copy them to the /platform-tools folder in your SDK folder.
Connect your Xoom to your computer. Type:
Code:
adb reboot bootloader
Wait for it to reboot into the bootloader.
Type the following commands, waiting for each to finish before continuing:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
You've now successfully flashed your Xoom back to stock. Now it's time to relock the device. Type
Code:
fastboot oem lock
wait for the menu
then press the volume-down button.
Then press the volume up button.
It'll take a minute or so, then reboot. You're now completely back to stock and ready for the update.
So if you are on Three . One you can use this to revert back to out of the box freshness?
Brenardo said:
So if you are on Three . One you can use this to revert back to out of the box freshness?
Click to expand...
Click to collapse
Yes. That is correct. This will return your XOOM to 100% stock.
word!
I have already been thru the LNX 0x0004 debacle and it was absolutely no fun whatsoever.
well I got a stuck at moto logo for 10 minutes
I am going to try to fastboot oem unlock, reflash images again and fastboot lock to see if I get out of moto logo
second install fix it
jlouang said:
second install fix it
Click to expand...
Click to collapse
So that means that you got it working, correct?
>.>
So the HRI66 is the latest version on the Motorola site? I really need to get a grasp of their version numbers.
EDIT:
Never mind looks like HRI66 is the latest version Thanks anyway.
i was thinking that with the change to the bootloader in the 3.1 update we couldn't use previous versions img's. But I am glad we can return to stock and get this 4G update!
I'm following all those steps directly. Once I type in adb reboot bootloader, it says starting Fastboot protocol support. Once I try to type any other command it says not recognized in adb. Any ideas?
Dead link...
dchurch85 said:
I'm following all those steps directly. Once I type in adb reboot bootloader, it says starting Fastboot protocol support. Once I try to type any other command it says not recognized in adb. Any ideas?
Click to expand...
Click to collapse
Did you extract all of the files in the ZIP into the 'tools' folder? The same one that adb is in.
Could someone help me,
After the rebooting device I got this massage :
Failed to boot LNX 0x0004
Starting RSD mode 2
Then stuck on Motorola logo. I can't enter the recovery mode.
What should I do ?
My Xoom is H.6.1-38-9 International version
CakraMas said:
Could someone help me,
After the rebooting device I got this massage :
Failed to boot LNX 0x0004
Starting RSD mode 2
Then stuck on Motorola logo. I can't enter the recovery mode.
What should I do ?
My Xoom is H.6.1-38-9 International version
Click to expand...
Click to collapse
This is what I was afraid of..... try searching the error you are getting. Not many options on how to fix.
i am curious about the LNX 0x0004 error. I know it comes from trying to relock with non-factory img's but what exactly does that mean? I am curious what actually causes the device to soft brick.
Finally I made it, .
I can enter to bootloader by fastboot method, flash the stock image, then relock my device.
Kinda having the same issue as dchurch... "adb reboot bootloader" reboots Xoom to the "M" logo with "Starting Fastboot protocol support," but I can't continue with nay further commands. My computer no longer recognizes the presence of my Xoom and my Xoom doesn't progress past this screen. I can boot it normally with no problem. I've extracted all of the necessary files into my platform tools folder with adb.. any input?
gatorhater73 said:
Kinda having the same issue as dchurch... "adb reboot bootloader" reboots Xoom to the "M" logo with "Starting Fastboot protocol support," but I can't continue with nay further commands. My computer no longer recognizes the presence of my Xoom and my Xoom doesn't progress past this screen. I can boot it normally with no problem. I've extracted all of the necessary files into my platform tools folder with adb.. any input?
Click to expand...
Click to collapse
You can try manually going into fastboot as well... there are two ways to do this:
No matter what, power off the Xoom. Then, 1) Power on the Xoom and as soon as you see it turn on (within a second or two of the power on), press the Volume Down button, which kicks it into Fastboot. 2) If you miss the 1st couple of seconds and press Volume Down after 3-5 seconds, it will say "Android Recovery." You can then press Volume Down until you get to Fastboot, then press Volume Up.
My guess is that you have a different issue, something to do with your Fastboot image. Not sure if booting the Xoom into the OS and connecting with USB Debugging on will work or not to flash the files, perhaps maybe just the boot.img?
I also believe that when the Xoom says "Starting Fastboot protocol support", it is in fastboot mode and you can send the fastboot commands to the Xoom. If your PC does not show the Xoom as a device in your PC's Device manager, then you will probably need to load new/correct drivers onto your PC.
Did you make sure that adb recognized your device? Adb devices in the camaned prompt
Sent from my Xoom using Tapatalk
How To Re-Flash Stock Image
Assuming you have ADB and everything setup already....
1. I just did this for practice. I did not need to do it –but I wanted to do it successfully before I “needed” to do it. I thought I would expand a little on the process and make it a little more noob friendly.
2. Getting started.
a. Read through the entire set of instructions first.
b. I am not responsible if you BORK your phone. I BORKED mine using someone else’s instructions and tried to write a very detailed step-by-step to help others out– but it is completely possible I have also made some small error in the instructions.
3. This will completely wipe your phone – including the SD partition – so transfer any files you need before you do this.
4. This will not re-lock your bootloader. It will remain unlocked.
5. Syntax (spelling, spaces, periods, dashes, CAPITOL, or lower case) matters. There were some spelling errors and file extensions left off the commands – and that will not work.
6.I used the file…
mysid-icl53f-factory-65895fa8.tgz
…which is 4.0.2 for the cdma/lte galaxy nexus [code name = toro/mysid]. The file is located here...
http://www.google.co...NiI9yTxKdUyW1tA
7. Unzip the file (I used 7.zip to do this).
Then you will have a .tar file…
mysid-icl53f-factory-65895fa8.tar
8. Unzip that file and you should end up with a folder…
mysid-icl53f
Inside that folder you will have five files…
i. bootloader-toro-primekk15.img
ii. flash-all.sh
iii. radio-cdma-toro-i515.ek05.img
iv. radio-toro-i515.ek02.img
v. image-mysid-icl53f.zip
Do not unzip “image-mysid-icl53f.zip”
9. Go ahead and copy and paste all these files to your directory…
/android/platform-tools
(or whatever directory you work from. You do not need the “flash-all.sh” so you do not have to copy it).
10. Open the Command Prompt in the directory where you have placed the necessary files by navigating to the directory, pressing shift, and then right mouse click (normally “C: /android/tools” or C: /android/platform-tools). This will bring up the dialogue box and you can select “open a command window here”.
11. Then enter the command…
adb devices
[…this should return your serial number…]
12. enter the command…
adb reboot-bootloader
[wait for bootloader – you should here 2 alert sounds – not just 1]
13. enter the command…
fastboot flash bootloader bootloader-toro-primekk15.img
14. enter the command…
fastboot reboot-bootloader
[wait]
15. enter the command…
fastboot flash radio radio-toro-i515.ek02.img
16. enter the command…
fastboot reboot-bootloader
[wait]
17. enter the command…
fastboot flash radio-cdma radio-cdma-toro-i515.ek05.img
18. enter the command…
fastboot reboot-bootloader
19. enter the command…
fastboot -w update image-mysid-icl53f.zip
20. So you know, steps 17 (flashing the cdma radio) and step 19 (flashing the update image) took longer than the rest so don't freak out - just be patient. If you did the steps in the proper order after entering the last command your phone should reboot on its own and be completely “fresh”. If you made mistakes (like I did the first time) and flashed the radios out of order (like I did) or did not wait long enough for an “Okay” dialogue (like I did) then when you reboot you will have no signal and no phone number and you will have to go through the process again and do it right (like I did).
Hope this helps someone.
Credit goes to JW at that other site for the fastboot commands. I just added detail for the write up.
Great guide, but what if the serial number doesn't show up?
Thank you for the excellent walkthrough. I am following it, but when I enter "adb devices" at the command prompt I receive "list of devices attached" but no serial number. Also, my Nexus displays: "Fastboot Command Read Error -2147483647". I did a battery pull after getting stuck in a bootloop, and am trying to recover. I can unlock and relock the bootloader, but that is the only command that is working.
Ominous39061 said:
Thank you for the excellent walkthrough. I am following it, but when I enter "adb devices" at the command prompt I receive "list of devices attached" but no serial number. Also, my Nexus displays: "Fastboot Command Read Error -2147483647". I did a battery pull after getting stuck in a bootloop, and am trying to recover. I can unlock and relock the bootloader, but that is the only command that is working.
Click to expand...
Click to collapse
if it does not return a serial number than the phone is not being recognized. I believe that there are 2 different sets of drivers that are needed. Let me look for the link and info.
the fact that it returns "list of devices attached" but no number means that it is not finding your device which means it is probably a driver issue. let me see what I can come up with. But I am no expert at any of this.
Ok - so I just did some testing of my own. I ran into the same problem as you. And I know that I have the drivers installed. So what I did was try and "shut down" any thing that could interfere with with ADB/Fastboot.
Any tethering apps that you may have - PDA NET, Easy Tether, etc, could possibly do this. Also - when you plug your phone in - and the Auto Play options pop up for FTP (File Transfer Protocol) - X out of that.
I initially plugged in my phone. Opened the command prompt in my platform-tools folder. typed in...
adb devices
...and I got the same message as you. I then "turned off" everything that could be causing problems with the process. I unplugged the phone and replugged it in (and closed the dialog box again) and then re-opened the command prompt and entered...
adb devices
...and then I got the proper return message.
thepolishguy said:
Ok - so I just did some testing of my own. I ran into the same problem as you. And I know that I have the drivers installed. So what I did was try and "shut down" any thing that could interfere with with ADB/Fastboot.
Any tethering apps that you may have - PDA NET, Easy Tether, etc, could possibly do this. Also - when you plug your phone in - and the Auto Play options pop up for FTP (File Transfer Protocol) - X out of that.
I initially plugged in my phone. Opened the command prompt in my platform-tools folder. typed in...
adb devices
...and I got the same message as you. I then "turned off" everything that could be causing problems with the process. I unplugged the phone and replugged it in (and closed the dialog box again) and then re-opened the command prompt and entered...
adb devices
...and then I got the proper return message.
Click to expand...
Click to collapse
I got the same problem with mine i dont have anything like pda net installed but nothing i have tried is able to get adb to list my phone
Getting the same issue myself...help!
Thank you so much I'm a total noob with this stuff but your guide was very helpful!
Noev said:
I got the same problem with mine i dont have anything like pda net installed but nothing i have tried is able to get adb to list my phone
Click to expand...
Click to collapse
ChuckTu said:
Getting the same issue myself...help!
Click to expand...
Click to collapse
Ok - so another member posted this...
ADB/Naked Drivers
...and I have heard some people say that it was very helpful. So hopefully this will help you guys to get your devices recognized.
Then there is also this thread and the OP said this...
Code:
On your windows PC. Use the root guide by bman
( [url]http://rootzwiki.com...nlock-and-root/[/url] )
and download the third option for drivers. Extract all
of these tho wherever you have your fast boot
( for me it was c:/users/thatmayh3mguy/) then run
fastboot in the cmd. The adbapi.DLL file will be there
and will make the fast boot work. I didn't have the sdk
installed ( fresh install of win 7 ultimate last week and
don't have it all set up yet) and it worked
thread...
adb help/getting your drivers installed correctly
OK - here is also another method that I found. I have PDA Net installed and I did not have any issues with fastboot. Here are some instructions that say the drivers that PDA Net use are the same drivers that you need for fastboot. So here is a link to the thread and hopefully one of these methods is going to work for you.
Installing PDA Net to solve your fastboot problems
ah ha - just read something else that I should have thought of...
If your phone is already in bootloader - the command...
adb devices
...will not work. so if you are in bootloader you should try the command...
fastboot devices
...instead and see if that returns anything for you.
just wanted to jump back in hear and say i was able to get mine working again. adb was allowing me to lock/unlock the bootloader i toggled that on and off then when i went to boot my phone it took a long time to boot but finally did. Thanks for all the help was in a real jam there for a minute. I used the naked adb drivers posted above not sure if that did anything but it worked for me. Thanks again!
Noev said:
just wanted to jump back in hear and say i was able to get mine working again. adb was allowing me to lock/unlock the bootloader i toggled that on and off then when i went to boot my phone it took a long time to boot but finally did. Thanks for all the help was in a real jam there for a minute. I used the naked adb drivers posted above not sure if that did anything but it worked for me. Thanks again!
Click to expand...
Click to collapse
cool. glad to hear it.
trying this with a Linux OS
So I have a Samsung Galaxy Nexus on Verizon and I put 4.0.4 (IMM30B) using the Galaxy Nexus ToolKit on Windows. Since then I've had a few issues with performance so I want to go back to stock (ICF53F) then maybe goto latest IMM76K (I think). I've retrieved the zip file from steps above and untar'd the file, but when I try to flash the boot file it just sits there waiting for device. I'm not sure what it's waiting for. I'm in fastboot mode and then plugged in the phone to the usb cord but nothing happens.
Any ideas?
UPDATE:
I figured out the issue. On a linux machine using fastboot requires super user privileges. Maybe an update to the instructions may be in order?
CMD keeps telling me waiting for device.
How long will it takes first time?
this after entering: fastboot flash bootloader bootloader-toro-primekk15.img
ladyminnie said:
CMD keeps telling me waiting for device.
How long will it takes first time?
this after entering: fastboot flash bootloader bootloader-toro-primekk15.img
Click to expand...
Click to collapse
Does "fastboot devices" return your device?
If not, you may have a driver issue.
Sent from my Galaxy Nexus using Tapatalk 2
A mistake I made a while ago, if you are sure that you have already installed ADB drivers, and your device still isn't being recognized by ADB..
Be sure USB Debugging is checked on.
Sent from my Galaxy Nexus using Tapatalk 2
adb devices returns my number from the phone
adb reboot-bootloader does bring my phone into bootloader
than it stops with the next command. I waited for 45 minutes/
---------- Post added at 07:03 PM ---------- Previous post was at 06:57 PM ----------
usb debugging was/is still on
The white small led is lightning up every 10 seconds orso
problem solved with:
http://forum.xda-developers.com/showthread.php?t=1766475
Hi all,
maybe a very silly question, but when I followed the instructions on https://wiki.cyanogenmod.org/w/Install_CM_for_amami, one of the steps is to open a cmd and type: fastboot getvar version. And well, when I do that and press enter, it says that: fastboot is not recognized as an internal or external command, program or batch file.
The phone is in fastboot mode (a blue light is on), and i have installed sdk and jdk 8u60 on my computer, which runs on windows 7.
Also my computer says that the device driver program is installed.
By the way, when installing jdk, it said I should enter "javac -version" in cmd, but that gave the same notification, howver jdk is installed on my computer.
Who can help me out?
Thanks in advance,
John
Joheee said:
Hi all,
maybe a very silly question, but when I followed the instructions on https://wiki.cyanogenmod.org/w/Install_CM_for_amami, one of the steps is to open a cmd and type: fastbood getvar version. And well, when I do that and press enter, it says that: fastboot is not recognized as an internal or external command, program or batch file.
The phone is in fastboot mode (a blue light is on), and i have installed sdk and jdk 8u60 on my computer, which runs on windows 7.
Also my computer says that the device driver program is installed.
By the way, when installing jdk, it said I should enter "javac -version" in cmd, but that gave the same notification, howver jdk is installed on my computer.
Who can help me out?
Thanks in advance,
John
Click to expand...
Click to collapse
Probably just a typo, but you wrote 'fastbood' in your post. Computer definitely won't recognize that. If you are spelling it right, either 1) you're in the wrong directly in terminal, (cd /(wherever adb is installed), or 2) adb package didn't install correctly, (reinstall). While you're testing it, you can just type 'fastboot', and you should get a list of command options, showing that it is installed.
Sorry yes fastbood was a typo. But what do you mean with: you're in the wrong directly in terminal, (cd /(wherever adb is installed).
A terminal is the same as a command prompt right?
And to reinstall adb package, i would have to delete the platform-tools right? And when i click on delete package, it asks if Im sure about it, bacause it can not be undone.
When you open command prompt, you're 'in a directory', usually in Windows, it's C:/(user)/desktop, or something. You need to get to the directory where adb is. If you installed it with defaults, it's probably C:/adb. If so, once you open command prompt, type 'cd /adb', and hit 'enter'. Then you'll be 'in the right directory'. If adb installed somewhere else, you'll have to find out where, then type 'cd /(whatever)/(whatever)/adb.
I still did not get it working. I deleted the whole android studio package and intalled the sdk tools only now, and installed platform tools in it and tried it all again.
My initial goal was to enter 'fastboot getvar version' in commandprompt. What I tried thus far:
This page (https://wiki.cyanogenmod.org/w/Doc:_adb_intro#Popular_adb_commands) said I should paste ;<path-to-sdk>/platform-tools behind the word Path in Environment variables so I did.
When I open commandprompt it already gives automatically: C:\Users\BTO>
When I just type adb there and hit enter, it says it is not recognized. When I hit cd /adb it says it can't find the given path. (why should I type adb at all by the way, and not fastboot getvar version?)
When I do first 'cd /' it gives C:\> and then adb it also says it can't find the given path.
When I hit C:\>Program Files (x86)\Android\android-sdk\adb it says it can't find the given path.
Deletion of the ;<path-to-sdk>/platform-tools behind Path in the Environment variables does not help.
Thanks for helping me!
Joheee said:
I still did not get it working. I deleted the whole android studio package and intalled the sdk tools only now, and installed platform tools in it and tried it all again.
My initial goal was to enter 'fastboot getvar version' in commandprompt. What I tried thus far:
This page (https://wiki.cyanogenmod.org/w/Doc:_adb_intro#Popular_adb_commands) said I should paste ;<path-to-sdk>/platform-tools behind the word Path in Environment variables so I did.
When I open commandprompt it already gives automatically: C:\Users\BTO>
When I just type adb there and hit enter, it says it is not recognized. When I hit cd /adb it says it can't find the given path. (why should I type adb at all by the way, and not fastboot getvar version?)
When I do first 'cd /' it gives C:\> and then adb it also says it can't find the given path.
When I hit C:\>Program Files (x86)\Android\android-sdk\adb it says it can't find the given path.
Deletion of the ;<path-to-sdk>/platform-tools behind Path in the Environment variables does not help.
Thanks for helping me!
Click to expand...
Click to collapse
First thing you have to do is find out where on your PC the adb files are. The computer won't recognize anything you type with fastboot, adb, etc., unless you're in that directory. I believe adding the environmental variable path is supposed to make that easier, but obviously it's not working out for you, so I would just skip that and find out where the files are, then you can just use 'cd', and go there. It should be easy to do a search in Explorer if you can't find it.
Thank you that you keep helping me.
I worked already 6 hours on it now in total and did not really get any step further. I found the adress of the adb files (the maps were hidden).
I found this page on internet: http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
So I followed those steps very precize, I installed the google usb driver in sdk.
Because the commandprompt still did not recognize the device (list of devices did not give any results) I was trying to force installation of the driver on my phone, but that is the step I now got stuck on. When I try to install it in fastboot mode (my device is then called S1Boot Fastboot) it says it can't find any drivers for my device (while I selected the right folder and clicked next??) and the same case when it's just turned on.
Still when I run fastboot getvar version it says <waiting for device>...
The https://wiki.cyanogenmod.org/w/Doc:_fastboot_intro page gives some poor troubleshooting info about this error. When I hit fastboot devices in the right directory it does not even give the waiting for device error. Changing usb ports does not help either.
Maybe it's something with the 'elevated privileges', I dont't know what they mean with that. But I have Administrator rights.
Joheee said:
Thank you that you keep helping me.
I worked already 6 hours on it now in total and did not really get any step further. I found the adress of the adb files (the maps were hidden).
I found this page on internet: http://www.howtogeek.com/125769/how-to-install-and-use-abd-the-android-debug-bridge-utility/
So I followed those steps very precize, I installed the google usb driver in sdk.
Because the commandprompt still did not recognize the device (list of devices did not give any results) I was trying to force installation of the driver on my phone, but that is the step I now got stuck on. When I try to install it in fastboot mode (my device is then called S1Boot Fastboot) it says it can't find any drivers for my device (while I selected the right folder and clicked next??) and the same case when it's just turned on.
Still when I run fastboot getvar version it says <waiting for device>...
The https://wiki.cyanogenmod.org/w/Doc:_fastboot_intro page gives some poor troubleshooting info about this error. When I hit fastboot devices in the right directory it does not even give the waiting for device error. Changing usb ports does not help either.
Maybe it's something with the 'elevated privileges', I dont't know what they mean with that. But I have Administrator rights.
Click to expand...
Click to collapse
Can you tell me what directory on your PC the adb files are located? As far as drivers, best bet is usually PC companion, or Flashtool.
Hi,
I found some time again. I have installed PC companion, but it doesn't show me how to install drivers. It says the software is up to date.
The location of the driver is C:\Users\BTO\AppData\Local\Android\sdk\extras\google\usb_driver
The location of the ADB files is C:\Users\BTO\AppData\Local\Android\sdk\platform-tools
Thanks
Joheee said:
Hi,
I found some time again. I have installed PC companion, but it doesn't show me how to install drivers. It says the software is up to date.
The location of the driver is C:\Users\BTO\AppData\Local\Android\sdk\extras\google\usb_driver
The location of the ADB files is C:\Users\BTO\AppData\Local\Android\sdk\platform-tools
Thanks
Click to expand...
Click to collapse
If PC Companion is giving you that msg, you might be OK w/ drivers. With that being the location of your adb files, you would open command prompt, and type - cd \Users\BTO\AppData\Local\Android\sdk\platform-tools\adb - then you'll be 'in' the right directory, (just to make sure, look in the 'adb' folder and see if fastboot exe is in there). Your command prompt should show - C:\Users\BTO\AppData\Local\Android\sdk\platform-tools\adb. Then type 'fastboot', and you should get output of command options.
If all goes well and you want to make it easier in the future, just move the whole 'adb' folder to C drive root. Then you'll only have to type 'cd \adb'.
Or you could just open a window in the correct directory, hold right shift button on keyboard and click right mouse button and select "open command prompt here "
Easy peezy
I already found how to fill in the commandprompt from the link from my post of 27 september (you can also go to the map, and shift+rightclick > open command here, then you can misspell anything). But the problem is it doesn't recognize my device. When I go to the right directory and fill in:
fastboot devices > nothing at all
fastboot device > <waiting for device>
fastboot getvar version > <waiting for device>
fastboot > a lot of stuff
adb devices > list of devices (but no items show up)
adb device > a lot of stuff
But to repeat a previous post: "Because the commandprompt still did not recognize the device (list of devices did not give any results) I was trying to force installation of the driver on my phone, but that is the step I now got stuck on. When I try to install it in fastboot mode (my device is then called S1Boot Fastboot in device manager) it says it can't find any drivers for my device (while I selected the right folder and clicked next??) and the same is the case when it's just turned on."
Joheee said:
I already found how to fill in the commandprompt from the link from my post of 27 september (you can also go to the map, and shift+rightclick > open command here, then you can misspell anything). But the problem is it doesn't recognize my device. When I go to the right directory and fill in:
fastboot devices > nothing at all
fastboot device > <waiting for device>
fastboot getvar version > <waiting for device>
fastboot > a lot of stuff
adb devices > list of devices (but no items show up)
adb device > a lot of stuff
But to repeat a previous post: "Because the commandprompt still did not recognize the device (list of devices did not give any results) I was trying to force installation of the driver on my phone, but that is the step I now got stuck on. When I try to install it in fastboot mode (my device is then called S1Boot Fastboot in device manager) it says it can't find any drivers for my device (while I selected the right folder and clicked next??) and the same is the case when it's just turned on."
Click to expand...
Click to collapse
Sorry i missed that... How about Flashtool driver installer? If you DL Flashtool, there's an exe in the 'drivers' folder that will install for you.
Hey you might be using windows 10,8,8.1 if so follow this guide http://forum.xda-developers.com/xperia-u/issues/guide-how-to-install-fastboot-xperia-t2170114
All The Best
Finally getting somewhere, flashtool worked, so fastboot getvar version and all stuff gave some answers.
I extracted the CM11 files, but when I enter fastboot flash boot boot.img in the platform tools directory, it says error: cannot load boot.img.
The CM11 map is in downloads, is is going wrong there? Or something else. The phone is in fastboot mode.
Joheee said:
Finally getting somewhere, flashtool worked, so fastboot getvar version and all stuff gave some answers.
I extracted the CM11 files, but when I enter fastboot flash boot boot.img in the platform tools directory, it says error: cannot load boot.img.
The CM11 map is in downloads, is is going wrong there? Or something else. The phone is in fastboot mode.
Click to expand...
Click to collapse
Try different files. Here's a boot IMG that I've used successfully - https://mega.nz/#!Jh0DETBQ!E-9WTlINpfq5r3PIiKaIXRId7ar8g3c8YHTJha1N6LM - and try this for recovery - https://mega.nz/#!E4UQwIoZ!UFpur2wY3tIAU7SdjuEg5fUA6N4BAVwX_TeK_CFpTyo
Use 'fastoot devices' before flashing to confirm connection.
That didn't work either. I downloaded the files of your links (btw I wouldn't also know what to do with the recovery file), so they are in my Downloads map of my laptop (can I just leave it there?). Then I wrote in the platform tools directory 'fastboot devices' and it gave an answer. When I filled in 'fastboot flash boot boot.img' it said it cannot load boot.img
And maybe I'm getting it wrong, but the size of the CM11 download is 262.87 MB (I took the first snapshot in this list: https://download.cyanogenmod.org/?device=amami), and the size of that boot.img is just 12.1 MB, so I think that that single .img can never be enough for the whole installation of CM11 though?
Joheee said:
That didn't work either. I downloaded the files of your links (btw I wouldn't also know what to do with the recovery file), so they are in my Downloads map of my laptop (can I just leave it there?). Then I wrote in the platform tools directory 'fastboot devices' and it gave an answer. When I filled in 'fastboot flash boot boot.img' it said it cannot load boot.img
And maybe I'm getting it wrong, but the size of the CM11 download is 262.87 MB (I took the first snapshot in this list: https://download.cyanogenmod.org/?device=amami), and the size of that boot.img is just 12.1 MB, so I think that that single .img can never be enough for the whole installation of CM11 though?
Click to expand...
Click to collapse
The boot and recovery files will just enable you to get into recovery. You'll need a ROM file to put a ROM on your phone. There are many to choose from in the 'android development', and 'original android development' threads. To flash with fastboot, put the boot.img and recovery.img files on your PC in the same directory as your adb files, (fastboot, etc). Then type 'fastboot flash boot boot.img', and when that's done, type 'fastboot flash recovery recovery.img, (make sure yor files are named 'boot.img, and 'recovery.img'). Then you can reboot into recovery. Once you download your ROM file, you want it to be on your SD card in the phone. When you get into recovery, you go to your ROM file and install.
Ok so I did this: "To flash with fastboot, put the boot.img and recovery.img files on your PC in the same directory as your adb files, (fastboot, etc). Then type 'fastboot flash boot boot.img', and when that's done, type 'fastboot flash recovery recovery.img, (make sure yor files are named 'boot.img, and 'recovery.img')."
Then I typed fastboot reboot, and it gave: rebooting... with total time 0.008 seconds, and I hit a couple of typed volume down (it said volume rockers on the how-to-wiki, so i guess it doesnt matter up or down) and then the screen turned black (but it's on), and the notification light is off. Battery was 80%, but phone is getting quite warm.
Furthermore, in 'my computer' the phone is not present. So I can not put the download (the CM11 folder of 262.87MB) on the sdcard. When looking into device manager, it could find it at portable devices but with a yellow exclamation mark, with as reason the device does not start (code 10). PC companion also said there is a mistake in the connection between the phone and the computer and advises me to get the phone off the computer and restart it. Good idea?
Update, it's now already over 1,5 hours on the blue 'waving' startscreen, and getting quite hot even. So it is stuck.
Joheee said:
Ok so I did this: "To flash with fastboot, put the boot.img and recovery.img files on your PC in the same directory as your adb files, (fastboot, etc). Then type 'fastboot flash boot boot.img', and when that's done, type 'fastboot flash recovery recovery.img, (make sure yor files are named 'boot.img, and 'recovery.img')."
Then I typed fastboot reboot, and it gave: rebooting... with total time 0.008 seconds, and I hit a couple of typed volume down (it said volume rockers on the how-to-wiki, so i guess it doesnt matter up or down) and then the screen turned black (but it's on), and the notification light is off. Battery was 80%, but phone is getting quite warm.
Furthermore, in 'my computer' the phone is not present. So I can not put the download (the CM11 folder of 262.87MB) on the sdcard. When looking into device manager, it could find it at portable devices but with a yellow exclamation mark, with as reason the device does not start (code 10). PC companion also said there is a mistake in the connection between the phone and the computer and advises me to get the phone off the computer and restart it. Good idea?
Update, it's now already over 40 minutes on the blue 'waving' startscreen, and getting quite hot even.
Click to expand...
Click to collapse
If your phone is stock, it won't boot with the new IMG you flashed. That's also why the computer doesn't recognize it. You can copy your ROM onto the SD card with your computer, using a card reader or adapter. Just flash both IMGs, then unplug, then turn it on, and hit vol up when you see purple. Make sure you type flash 'boot' for the boot, and flash 'recovery' for the recovery, not 'boot' for both. Also, if you want, there are custom IMG files with recovery on xda for stock ROM that you could flash the same way, if you just want to use your stock.
---------- Post added at 04:54 PM ---------- Previous post was at 04:47 PM ----------
Joheee said:
Ok so I did this: "To flash with fastboot, put the boot.img and recovery.img files on your PC in the same directory as your adb files, (fastboot, etc). Then type 'fastboot flash boot boot.img', and when that's done, type 'fastboot flash recovery recovery.img, (make sure yor files are named 'boot.img, and 'recovery.img')."
Then I typed fastboot reboot, and it gave: rebooting... with total time 0.008 seconds, and I hit a couple of typed volume down (it said volume rockers on the how-to-wiki, so i guess it doesnt matter up or down) and then the screen turned black (but it's on), and the notification light is off. Battery was 80%, but phone is getting quite warm.
Furthermore, in 'my computer' the phone is not present. So I can not put the download (the CM11 folder of 262.87MB) on the sdcard. When looking into device manager, it could find it at portable devices but with a yellow exclamation mark, with as reason the device does not start (code 10). PC companion also said there is a mistake in the connection between the phone and the computer and advises me to get the phone off the computer and restart it. Good idea?
Update, it's now already over 1,5 hours on the blue 'waving' startscreen, and getting quite hot even. So it is stuck.
Click to expand...
Click to collapse
Try this for stock - https://mega.nz/#!k0cTUQbS!5XUZhTEK4xBKVBSeO83TEHE3xs9JEpvxt3g1Sc8tVH8
I tried to flash the 2.0 image on my Huawei watch and as I launched the "flash all" command, it failed with the message "data package too big". Watch rebooted and remained stuck on the huawei logo. I can enter recovery , I can enter bootloader, but even if I wipe all data and factory reset, the reboot still stops at that screen. Any ideas? Is it bricked?
Sent from my SM-G935F using XDA-Developers mobile app
I had this issue last week.
I resolved it by reflashing 1.4, booting it up, and eventually having the courage to retry 2.0.
I got the latest ADB, but in my case, for the various flashing attempts, the .bat's did not work, so I had to manually flash each file. Apparently, the first time I flashed 2.0 I must have missed a file, because on my second attempt, everything worked perfectly.
As long as you can access fastboot, everything is fine (i.e any damage you do is resolvable).
hi
i managed to get mine working as well ! (Thanks to abhanli, pkt_lnt and skin180)
make sure you are in fastboot menu on your watch (holding the power button till switches off and the pressing again after vibrates)
most important thing next is to press shift and right click anywhere in the adb folder on your computer, and then run command prompt from there, otherwise adb will not load up and you will think that you have just run a dodgy script !
unlock your bootloader (typing "Fastboot Oem Unlock" in the command prompt in adb folder)
then you can use steps of skin180 (link above)
OR
https://developer.android.com/wear/preview/downloads.html
scroll down to huawei watch and choose second download option (non preview image for after testing) (thanks pkt_lnt)
extract into your adb folder (located in c:\)
then using the command prompt in adb folder, navigate to that extracted folder (using dos commands)
then if you are on windows, type "flash-all.bat"
hey presto - will work !
when it reboots, you may think "darn it still has spinning dots !" but if you wait about 5-10 mins it progresses past that stage and comes up with welcome screen !
My watch is working again !
HUAWEI customer services are a pile of POO. Their repair centre in UK is waste of time. They never answer the phone and never reply to messages.
If the Huawei watch wasnt so beautiful, i'd never bother with them !
Good luck and thanks all.
can you please give me a more detailed steps
i only want to get back to 1.4
Hi all! It took me a lot of time to finally being able to root this tablet. It's old, slow and practically unusable, but with some tricks it can be made much, much better. I'm going to explain what you need to do to root this tablet, and in case of brick (which happened to me many, many times) how to unbrick it. I even got to a point where I could not even boot into recovery mode, and only fastboot was working, that was scary, but I managed to get out. Every single file I will use will be bundled in a ZIP you can download, and I'll try to make sure this link stays up, because there's nothing more frustrating than wanting to make these things in the future only to find out the link is dead, along with all your hopes. Before we begin, a little disclaimer:
Code:
#You, and only you are responsible for everything that you do or happens to your tablet.
#If you screw up, I have a number of backups to help you recover, but if that's not enough don't point a finger at me.
#I will not be babysitting anybody to help restore their tablet or recover lost data.
#This process WILL wipe all of your data, do a backup before beggining.
#YOU HAVE BEEN WARNED!
1. ENABLING USB DEBUGGING
This is a very basic step, but it's needed if you want to even begin to do this. You'll need to go to "Settings -> About Phone". There, look for a line that says "Compilation Number" (or something like that) and tap it multiple times. You will see a message pop up saying "You are now a developer" (I wish it was that easy). Go back to the settings screen, you will see a new option appeared called "USB Debugging". Enable it, and make sure "Developer Options" are enabled too at the very top of the screen. Now, connect the tablet to your computer. You will see a message pop up asking for permission, tap "Always allow from this computer" and press "Allow".
That's it for this step.
2. SETTING UP ADB TOOLS AND MAKING SURE THEY WORK
Now that we have USB debugging enabled, and we have allowed our PC to access the tablet, we can begin setting up ADB. The required files are attached in the zip.
Extract the "platform-tools" folder and move it somewhere nice. Then open it, hold shift and right click in a white space and select the option "Open command window here". CMD will pop up, now type:
Code:
adb devices
It will probably say something about a server followed by a list of attached devices. If you see a serial number there, then great! ADB is working as it should. If not, make sure the tablet is connected, that USB Debugging is on, and if all else fails, try with another cable.
Now for the juicy part.
3. UNLOCKING THE BOOTLOADER
We will have to unlock the bootloader if we want to do anything here. Here's what to do. Type:
Code:
adb reboot fastboot
Wait until the tablet reboots into fastboot. Once there type:
Code:
fastboot oem unlock
fastboot oem unlock confirm
This should unlock the bootloader.
NOTE: This method of unlocking is reported to not work anymore, but I listed it anyway just in case, as it doesn't hurt to try. If this is not working for you, don't panic, it's normal, use the following code instead:
Code:
fastboot oem asus-go
fastboot oem asus-go confirm
This should work, and the bootloader should be unlocked now.
4. INSTALLING THE REQUIRED FIRMWARE
Now, your tablet may or may not have the required firmware for the procedure, but just in case we will flash one that's sure to work. If you followed along, you should be in fastboot mode right now. Type:
Code:
fastboot reboot
Your tablet should boot as normal, without any changes (unless the first bootloader unlock method worked for you, in which case it probably wiped all of your data). Now we can access ADB once again, so type:
Code:
adb reboot recovery
The tablet will reboot into recovery mode and you should see an image of wasted android with an open belly (if you don't see this it doesn't matter). You should see a list of options with blue text, you must use the volume keys to navigate this menu. If you don't see any options, press any volume key and they should appear. If instead of getting into recovery mode, the tablet just turned off, then go to the "Fixing recovery" section.
In this menu, you must select "Wipe data/factory reset". This will, obviously, wipe all of your data. Once that finishes, select the "Install update through ADB" option. Once that's done, make sure the "updated_firmware.zip" file is in the same directory as the "adb.exe" file, then type:
Code:
adb sideload updated_firmware.zip
This will install the firmware, it will take about 20 mins. Once finished, reboot the device. You may think it got bricked at this point, fear not, the first boot really takes this long (about 10 mins).
Once everything is done, the device should boot up and everything should be exactly as it was when you took it out of the box, meaning, it doesn't even remember your wifi password. Do a quick (but proper) set up and enable USB Debugging again, make sure to allow the PC again (and check the "always allow" box). Also, scroll down a bit more in the developer options section and look for one that says "Verify apps installed through USB" or something of that kind. Make sure it's unchecked. Now, we gotta install root.
5. ROOTING
The all holy root, finally here. Type this into the terminal:
Code:
adb reboot fastboot
You should be familiar with this process by now. Once in fastboot mode, type:
Code:
fastboot boot root.img
Once finished, reboot. You should boot up as a rooted user, hooray! Only one final step, we gotta give ourselves some means to control this new power, that's where the SuperSU app comes into play.
6. INSTALLING SUPERSU
Apparently, not every single SuperSU apk file works... but lucky for you, I managed to scout and bundle one that does, so use that one. Make sure the apk file is in the same folder as "adb.exe" (as with all of the previous files) and type:
Code:
adb install supersu-2-82.apk
Leave it a few mins, and you should see a "success!" message when it's finished. Open the SuperSU app and it will tell you that you need to update the binaries. Say yes to that, and when asked wether to do a "Normal" update or "TWRP" update, select normal. It should be successful and prompt you to reboot, do so.
That's about it, you now have root access in the ASUS ZenPad C 7.0.
NOTE: Every single attempt I made to make the SuperSU app a system app resulted in the app crashing and I needed to reinstall it again, do as you please.
Why would you even want to do this you might ask? Well, I personally used this to make a few tweaks with Kernel Auditor and L Speed, two apps that will let you customize the performance of the machine to its maximum... sacrificing battery of course. You can search online for the best configuration for you for these apps. With the right tweaks, it transforms from **** to usable, and you need root for all of this.
As a quick note, you might notice that the SuperSU pop up that prompts you wether to grant or deny root access to an app is delayed, that's just how life is with this machine, it's slow. As a tip, when an app is trying to acquire root access, go back to the home screen and open the SuperSU app, then go back to the app you were trying to give it access to, it should appear quicked that way. Sometimes it's so slow that the app says I don't have root, only to have the pop up appear 10 seconds later. Now... to a final chapter.
7. UNBRICKING
This would be the end of the story if nothing went wrong, you have a rooted tablet and you can now do whatever you want with it, but that's not how life is. **** happens, things can go wrong, and when they do, you better have a backup plan. I don't know how to get back your ex, but I know how you can unbrick your tablet if that should happen. Follow these steps if you want to recover this machine...
Code:
#This process will wipe all data, but you shouldn't care about that since you can't access it anyway.
So, if the tablet doesn't turn on and gets stuck at the boot up screen, what can we do? Well, let it sit at the boot up screen for a few mins, and then type in the terminal:
Code:
adb devices
If it's recognized, then type:
Code:
adb reboot recovery
If it's not recognized, press the power button and the volume down key until the tablet turns off. Once that happens, press the power button and the volume down key, when the logo appears, let go of the power button and keep the volume down key pressed, that should boot the tablet into recovery mode. If you got into recovery mode, skip to 7.2
7.1 FIXING RECOVERY MODE
Sometimes, (it happened to me), recovery mode is broken.... it just doesn't appear, no matter what you do you can't get into it. To fix this, we gotta flash it again. We gotta enter fastboot mode. One option is to boot up the device until it gets stucked and wait a few mins, then adb should be able to recognize it and you type:
Code:
adb reboot fastboot
If that's not the case, turn the tablet off and press power and volume up, that should get you to fastboot. Once there type:
Code:
fastboot devices
And the tablet should appear there, if it doesn't... well it better do. I don't really know what to do if it doesn't appear there, but there shouldn't be a reason for it not to. I guess you can try to enter fastboot once again, with the tabler connected from the beggining or something like that, let's just assume it does, and if it doesn't then I'm sorry to tell you that's homework you will have to do.
Once here, we must format the cache and the data partition, for that type the following:
Code:
fastboot format cache
fastboot format userdata
Now, we need to get the recovery files, grab them from the zip I gave you. The files in question are "recovery.bin" and "vrl.bin". We will start with vrl. Once the two formats are finished, type:
Code:
fastboot flash vrl vrl.bin
Followed by:
Code:
fastboot flash recovery recovery.bin
Once that's done, press the power button and volume down keys until the tablet turns off. Then, press them again until the logo appears, and when that happens let go of the power button, that should get you (finally) into recovery.
7.2 UNBRICKING (FOR REAL THIS TIME)
Well, now that everybody is on the same page, and we could get to recovery mode, it's time to repeat some steps really... Follow the procedure from step 4 onwards (from the part that tells you to go to recovery). So, wipe data and apply that damn zip with sideload, the tablet should work now.
That's all I have to offer guys. I'm not a developer, I'm just a guy with a bunch of free time on his hands, so I was able to gather all of this information and (most importantly) files so you can root and fix this god damn tablet. Until the next one!
FINAL NOTE: In the files I included, there's a TWRP.img file. This is the TWRP custom recovery. As far as I know, this version should work with this tablet, but I was unable to flash it and make it work. IF YOU WANT TO TRY THIS DO SO AT YOUR OWN RISK, IT'S HIGHLY PROBABLE THAT THIS WILL RESULT IN BRICKING YOUR TABLET AND BREAKING THE STOCK RECOVERY, IN WICH CASE YOU WILL NEED TO FOLLOW THE STEPS STATED IN THIS GUIDE.
I couldn't upload the files as an attachment directly... sorry.
The "updated_firmware.zip" file is added as a separate download because it's a bigger file, and I prefer to let people decide if they even want it in the first place.
updated_firmware.zip
Everything else
None of the 8 drivers from Intel or Google detect the device in fastboot mode. I tried fixing this tablet years ago and had the fastboot drivers. As far as I know I have the same ones. These all loaded with no problem, but I could never get ADB Device to detect it in fastboot mode
Google: Android ADB Interface | Android Bootloader Interface | Android Composite ADB Interface
Intel: Android ADB Interface | Android Bootloader Interface | Intel AndroidADB Interface | Intel Android Bootloader Interface | Intel Android Composite ADB Interface
neghvar said:
None of the 8 drivers from Intel or Google detect the device in fastboot mode. I tried fixing this tablet years ago and had the fastboot drivers. As far as I know I have the same ones. These all loaded with no problem, but I could never get ADB Device to detect it in fastboot mode
Google: Android ADB Interface | Android Bootloader Interface | Android Composite ADB Interface
Intel: Android ADB Interface | Android Bootloader Interface | Intel AndroidADB Interface | Intel Android Bootloader Interface | Intel Android Composite ADB Interface
Click to expand...
Click to collapse
Make sure you enable usb debugging, no driver will work without that enabled.
tralph3 said:
Make sure you enable usb debugging, no driver will work without that enabled.
Click to expand...
Click to collapse
Not possible. This hangs during boot up or I can enter fast boot mode. It has been like this for years. Basically a soft brick. I tried to fix this years ago as stated above, but having seen this latest post about it, I decided to try again. But this time, I cannot find a fastboot driver that shows the device as attached when I run ADB devices
neghvar said:
Not possible. This hangs during boot up or I can enter fast boot mode. It has been like this for years. Basically a soft brick. I tried to fix this years ago as stated above, but having seen this latest post about it, I decided to try again. But this time, I cannot find a fastboot driver that shows the device as attached when I run ADB devices
Click to expand...
Click to collapse
Be aware that when in fastboot mode, adb devices never lists anything, you must use "fastboot devices"
tralph3 said:
Be aware that when in fastboot mode, adb devices never lists anything, you must use "fastboot devices"
Click to expand...
Click to collapse
Yep! That's where I was messing up. Thank you.
And the tablet is now working. Thank you very much.
One last question though. I tried to install the twrp.img file included in the pack
fastboot flash recovery TWRP.img
Here is what I got
Sending 'recovery' (26588 KB) (bootloader) Ready to receive: 0x019f7000 size of data
OKAY [ 0.741s]
Writing 'recovery' (bootloader) Flashing partition: recovery
FAILED (remote: ' Download image size is large than partition size')
fastboot: error: Command failed
How do I get around this if the image file is too large?
neghvar said:
Yep! That's where I was messing up. Thank you.
And the tablet is now working. Thank you very much.
One last question though. I tried to install the twrp.img file included in the pack
fastboot flash recovery TWRP.img
Here is what I got
Sending 'recovery' (26588 KB) (bootloader) Ready to receive: 0x019f7000 size of data
OKAY [ 0.741s]
Writing 'recovery' (bootloader) Flashing partition: recovery
FAILED (remote: ' Download image size is large than partition size')
fastboot: error: Command failed
How do I get around this if the image file is too large?
Click to expand...
Click to collapse
Yeah I never could get around it either. I never could install a custom recovery on this tablet, it just wasn't made for it. But hey, root is cool.
Work?
Still working?
jerryspring said:
Still working?
Click to expand...
Click to collapse
Why wouldn't it? This tablet ain't gonna change. Everything should work no problem.
Hi, any custom rom for this device to make it useful ?
It is in my drawer for more than 2 years and I just do not know what with it
Also how to play with settings in root mode so I can make it faster ?
Hey folks,
I recently followed this guide and a couple of issues.
First, I had expected all my data to be gone, which is fine. But it wasn't. I seemed to have gotten all the way through without it being reformatted, and this makes me suspect I never really achieved all the goals.
One thing I should note, in recovery boot, I had to use the volume button to select a source. No big deal, but it had not worked until I guessed I needed to do that.
Oh, and another thing is I had to install the driver package, and then after, once it was rebooted into fastboot, manually guide the device manager to select from list.
It seems after complete shutdown and then a fresh bootup, my SuperSU software was gone. So, is this only a tethered root boot? Is there a completely untethered?
After rebooting again, it seems my device will not complete booting, but I will give it some more time. I may have bricked it, though I have no idea how lol. All I did was enable USB debugging again and issued the reboot command.
I know this is an old guide, and probably long forgotten by most participants, but I recently got one of these tablets online, open box but new or like new, for around $20, and I would like to get it rooted because otherwise, it is extremely sluggish and the battery drains very fast. I read online it is google play services at fault, but I do not know for sure.
Anyway, if anyone has any updated info or alternative method to achieve full root access untethered, please advise. Unless this guide is that, in which case I just need to try again. Just out of curiosity, what is the TWRP.img for?