Anyone interested in a MIUI rom?
Is there someone how like te help me build?
Greetzzz
voltigeur said:
Anyone interested in a MIUI rom?
Is there someone how like te help me build?
Greetzzz
Click to expand...
Click to collapse
If you can get this out, trying to convert my wife to android from iOS. Would be willing to test, especially since multiRom is in the works.
Assuming you have dropped interest in porting one over. I have never ported a rom or done anything dev wise but may give it a go over the next 2 or 3 days and see if I can get a stable MIUI port.
marshmallow miui on Nexus 5x would be awesome
been waiting for this rom since the N5x was announced
xellion said:
marshmallow miui on Nexus 5x would be awesome
been waiting for this rom since the N5x was announced
Click to expand...
Click to collapse
I will try to port but at the moment I wish to use patchrom and there is no mm code for it. Will try porting the MI4 as it uses the same SoC and same amount of ram.
---------- Post added at 06:42 PM ---------- Previous post was at 06:19 PM ----------
Have never ported a ROM so just trying to figure out everything is daunting for me lol. I don't have a lot of spare time.
Update: will have to wait for a 6.0 update on miui.
Illogi.xbone said:
Update: will have to wait for a 6.0 update on miui.
Click to expand...
Click to collapse
yeah, i've been looking in to this...
can you use a rom like this?
http://en.miui.com/thread-178779-1-1.html
i've never built my own rom, but the process looks like you take an existing rom and mix it with a stock 5x image?
xellion said:
yeah, i've been looking in to this...
can you use a rom like this?
http://en.miui.com/thread-178779-1-1.html
i've never built my own rom, but the process looks like you take an existing rom and mix it with a stock 5x image?
Click to expand...
Click to collapse
You can but want to take it from a device similar like one with a snapdragon 808 like the MI4c. Once I see that get updated to 6.0 globally I will gibe it a shot.
Illogi.xbone said:
You can but want to take it from a device similar like one with a snapdragon 808 like the MI4c. Once I see that get updated to 6.0 globally I will gibe it a shot.
Click to expand...
Click to collapse
How´s the status? I´m really looking for MIUI on the 5x
Too bad I can´t help to build it.
Jangro1107 said:
How´s the status? I´m really looking for MIUI on the 5x
Too bad I can´t help to build it.
Click to expand...
Click to collapse
Not even close. PC went out on me and, to help cover some bills, I had to fall back on my S6 and sell my 5x =( If you are like me and have 0 experience HERE is a really good guide! Sorry I can't be of further help.
Update: Patchrom is still not updated to MM so even without the device or my main PC I couldn't build it anyway and the only way to build it is with MI4c roms. They haven't even released the 5.1 patchrom
Is there anyone else interested in giving a try about this happening?
Of course I am interested in whole MIUI thing.
Sent from my Nexus 5X using Tapatalk
Nexus 6p has a Miui project. Is it possible to talk to these guys and get the info on how to do it for the n5x? Im not an Android dev otherwise I would?
Sent from my Nexus 5X using XDA-Developers mobile app
I am not a dev either but I am interesting in the whole Miui project.
Someone that can help?
am in guys just tell me what to do
Do you have grips with the patchrom?
I have the patchrom source downloaded and the recommended system base(latest marshmallow build for 5x) basing on what i read on this guide but i have problems while creating a dump of the rom if anyone wants to help ping me
https://github.com/MiCode/patchrom
Check it here
../tools/releasetools/ota_target_from_phone -r (this will generate a stockrom.zip, flash this zip in recovery mode to ensure it works)
imarcel99 said:
https://github.com/MiCode/patchrom
Check it here
../tools/releasetools/ota_target_from_phone -r (this will generate a stockrom.zip, flash this zip in recovery mode to ensure it works)
Click to expand...
Click to collapse
yeah but flashing the stock rom to then go back to what i'm currently running ir's quite boring maybe i can just extract files from the factory image?
Well I guess that's the gamble you have to take. And always have a Nandroid backup
Related
I need a CM 4.2.2 Boot.IMG for our m7vzw. Working on soft porting miui and need a 4.2.2 boot image not 4.3. Thanx.
jmotyka said:
I need a CM 4.2.2 Boot.IMG for our m7vzw. Working on soft porting miui and need a 4.2.2 boot image not 4.3. Thanx.
Click to expand...
Click to collapse
I have a cm-10.1.3 rom here. http://vp-zp.com/snuzzo/roms/flyhalf205/cm10.2/m7vzw/cm-10.1.3-m7vzw.zip
Flyhalf205 said:
I have a cm-10.1.3 rom here. http://vp-zp.com/snuzzo/roms/flyhalf205/cm10.2/m7vzw/cm-10.1.3-m7vzw.zip
Click to expand...
Click to collapse
I love you! No homo!
jmotyka said:
I love you! No homo!
Click to expand...
Click to collapse
I will say i never have tried this ROM. I built it for a user and I only assumed it worked cause he never came back complaining lol
Sent from my One using Tapatalk now Free
LOL. Ive always been a fan of the customization. So its worth it to me. Im not and android pro but i know how to get things working after a while of tinkering. If i have trouble do you feel like helping?
jmotyka said:
LOL. Ive always been a fan of the customization. So its worth it to me. Im not and android pro but i know how to get things working after a while of tinkering. If i have trouble do you feel like helping?
Click to expand...
Click to collapse
I can try. Don't know much of MIUI.
I always loved the customization of MIUI. Looking forward to this!
PM sent.
Hey, are you guys still working on this?
Sent from my One using Tapatalk
I too would like to know the progress of the MIUI port. My favorite ROM! Anything I can do to help?
I know that @Notorious is always willing to help
Maybe after you post it he'll help debug logcats
http://consumer.huawei.com/cn/mobile-phones/support/downloads/detail/mt1-u06-cn.htm?id=26642
Anyone upgrade to this latest ROM B930?
Hi syaah..
Havent heard from you lately..
Is the update still on 4.2.2?
...........
My bad.
Still 4.2.
Hope someone try this and see whats updated and improved..
....sold my Mate and now on Honor 3C..
Still missing my mate..
[email protected]
I did. It works way better than any stock I have tried. It have very clever optimisation software/tweaks on board. Keep in mind I have a 1gb version. No gapps so u have to flash your own. I think even if flash by the local upgrade method will still wipe the phone. But it is still root able by eroot. Xposed will give u a bootloop btw.....
scpion said:
I did. It works way better than any stock I have tried. It have very clever optimisation software/tweaks on board. Keep in mind I have a 1gb version. No gapps so u have to flash your own. I think even if flash by the local upgrade method will still wipe the phone. But it is still root able by eroot. Xposed will give u a bootloop btw.....
Click to expand...
Click to collapse
so you're saying that hauwai killed the phone wen it launched releasing it with v4.2.2 and never upgraded it?
btw this thread should be on general discussion
PTGamer said:
so you're saying that hauwai killed the phone wen it launched releasing it with v4.2.2 and never upgraded it?
btw this thread should be on general discussion
Click to expand...
Click to collapse
We.. Dun.. have a general discussion thread...
Worse.. Huawei release 4.2.2 for China device only. International version is stuck on 4.1.2.....
theoppositeman said:
Hi syaah..
Havent heard from you lately..
Is the update still on 4.2.2?
...........
My bad.
Still 4.2.
Hope someone try this and see whats updated and improved..
....sold my Mate and now on Honor 3C..
Still missing my mate..
[email protected]
Click to expand...
Click to collapse
Still using a huawei after all the drama with the mate?
hamdimo said:
Still using a huawei after all the drama with the mate?
Click to expand...
Click to collapse
Ive been with huawei and htc for very long time. And for ovee ten years been using tons of brands. Though am not a devs and still a noob, i am gratefull to all devs here with their guides and helps, each brands i used has been rooted and changing roms as often as i can.
Yeah, still with huawei. I guess its a personal interest i get glued to them..
[email protected]
friends enjoy modified b930
http://cn.club.vmall.com/forum.php?mod=viewthread&tid=1237908&extra=page%3D1%26filter%3Dtypeid%26typeid%3D236%26typeid%3D236
theoppositeman said:
Hi syaah..
Havent heard from you lately..
Is the update still on 4.2.2?
...........
My bad.
Still 4.2.
Hope someone try this and see whats updated and improved..
....sold my Mate and now on Honor 3C..
Still missing my mate..
[email protected]
Click to expand...
Click to collapse
Hi theoppositeman,
I am still around, had my HAM bricked, got the service centre to replaced both the motherboard and battery under warranty. At the moment on stock Rom, looking into flashing any latest update available.
syaah said:
Hi theoppositeman,
I am still around, had my HAM bricked, got the service centre to replaced both the motherboard and battery under warranty. At the moment on stock Rom, looking into flashing any latest update available.
Click to expand...
Click to collapse
Wow. You bought another one? Since you said its repaired under warranty, ive been using mine since january last year, bricked on march this year, sent it to SC and they replace me with new unit on 1st april for 300myr. Never regret using this monster, though my friend force me to sell it since its almost 2 years with it he said and i should move on with new one..haha what a lame excuse..
........
I have been using many custom roms and the beat choice was by kangvip. Everything seem functional and fast. Miui roms are good but for me adjusting the large icons through the build.prop has some side effects especially the smoothness. Well since we had a new B930 update, i guess devs will work their hands on customised it..
[email protected]
could you please post a mirror for the modified one, google translate refuses to translate the page
thank you
shoguncito said:
could you please post a mirror for the modified one, google translate refuses to translate the page
thank you
Click to expand...
Click to collapse
Maybe its already in needrom.com too. Try checking it there, hopefully its uploaded in the list too. I usually get roma over there if links here having trouble.
..........
Just checked needrom. Maybe its this one uploaded on 2 sept.
http://www.needrom.com/download/ascend-mate-3/
[email protected]
Hello guys
i have problem
i installed Hydrom rom from husen4u and i want to test this rom
what do you thinking about this rom ?
is it was stable and fastable ?
what do you think ?
theoppositeman said:
Wow. You bought another one? Since you said its repaired under warranty, ive been using mine since january last year, bricked on march this year, sent it to SC and they replace me with new unit on 1st april for 300myr. Never regret using this monster, though my friend force me to sell it since its almost 2 years with it he said and i should move on with new one..haha what a lame excuse..
........
I have been using many custom roms and the beat choice was by kangvip. Everything seem functional and fast. Miui roms are good but for me adjusting the large icons through the build.prop has some side effects especially the smoothness. Well since we had a new B930 update, i guess devs will work their hands on customised it..
[email protected]
Click to expand...
Click to collapse
Hi theoppositeman,
Nope, still using the old unit, with new motherboard and new battery which was replaced by the service centre in May. Had a WP8.1 device for a short while, but then decided to return back to my mate as the battery for mate is still better. After awhile, now looking to flash custom or new rom. Any suggestions?
scpion said:
I did. It works way better than any stock I have tried. It have very clever optimisation software/tweaks on board. Keep in mind I have a 1gb version. No gapps so u have to flash your own. I think even if flash by the local upgrade method will still wipe the phone. But it is still root able by eroot. Xposed will give u a bootloop btw.....
Click to expand...
Click to collapse
Thks scpion, does it come with the 4 or 5 icons on each row?
syaah said:
Hi theoppositeman,
Nope, still using the old unit, with new motherboard and new battery which was replaced by the service centre in May. Had a WP8.1 device for a short while, but then decided to return back to my mate as the battery for mate is still better. After awhile, now looking to flash custom or new rom. Any suggestions?
Click to expand...
Click to collapse
As far as i hv using roms for my mate, Hyd52Rom is the best one.
Stable and definitely smooth with fast response.
Everything works on it even the latest beta xposed frameworks.
[email protected]
syaah said:
Thks scpion, does it come with the 4 or 5 icons on each row?
Click to expand...
Click to collapse
5 x 5 .
---------- Post added at 12:35 AM ---------- Previous post was at 12:27 AM ----------
theoppositeman said:
As far as i hv using roms for my mate, Hyd52Rom is the best one.
Stable and definitely smooth with fast response.
Everything works on it even the latest beta xposed frameworks.
[email protected]
Click to expand...
Click to collapse
If I have the 2GB version I will go definitely go with hyd52Rom. But me having the 1GB seriously impairs the performance and multitasking. B930 helps me to take care of that by selectively shutting down apps after screen is off .. But I guess greenify does that as well.
theoppositeman said:
As far as i hv using roms for my mate, Hyd52Rom is the best one.
Stable and definitely smooth with fast response.
Everything works on it even the latest beta xposed frameworks.
[email protected]
Click to expand...
Click to collapse
I know that, the last time I bricked my HAM was with the Hyd52Rom.
Hello fellow XDA members, I recently purchased a Le Pro 3 and a Le S3 during the flash sale and would like to use Cyanogenmod on my devices. I was wondering if anyone on this forum has ever ported a ROM before as I have not, and only know about the CM porting guide and opensource.le.com for the kernel source. If anyone has any tips or would like to assist me in porting CM13 to the Pro 3 please reply to this thread or PM me. Thanks, and let's hope LeEco releases the source soon!
Love to help but this isn't my department ????. But we should probably see more support in a couple more days once they start arriving here
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
dr4stic said:
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
Click to expand...
Click to collapse
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
limitlesscodes said:
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
Click to expand...
Click to collapse
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
dr4stic said:
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
Click to expand...
Click to collapse
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
limitlesscodes said:
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
Click to expand...
Click to collapse
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
dr4stic said:
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
Click to expand...
Click to collapse
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Not a lot. I've identified the CAF tag the sources are based on and have been working to separate the relevant LeEco mods from the less relevant ones. I've also been attempting to remove the leeco specific things from the drivers that i'm keeping since they're a horrible mess and CM won't be able to make use of them anyway. I've also been finding the appropriate open versions of the drivers and taking the latest ones instead.
The mods from LeEco seem to be a mess, the dmesg output I got from a user on the chinese model (the x720) had segfaults from the modifications just after boot. The logcats are so full of errors I was unable to get the user to send me a full logcat from boot.
Interestingly enough, the chinese system rom looks like it came from a Le Max2. This makes sense since it's LeEco's first msm8996 device, and the Le Pro3 is the second one. I imagine the kernel sources work across a number of the 8996's.
Can you send me the link to where you got the open drivers.
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Please share the sources.
Sent from my LEX727 using Tapatalk
ceo.mtcl said:
Please share the sources.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
here
limitlesscodes said:
here
Click to expand...
Click to collapse
Thank you so much!
limitlesscodes said:
here
Click to expand...
Click to collapse
This is not a International version? Its USA version? Where is the International source code?
Here's a mega mirror in case the drive link goes down.
https://mega.nz/#!7Ek3HYaB!1H0WibOjwlg1P0vaaJ2qcrAAsl-PjruB9-_X1ECqfnw
Wish i could help more, but it looks like the kernel source is in there too, perhaps that means a fully functional cm13 rom that works AT LEAST as well as the stock rom. VERY EXCITE!
+1
I'm also waiting for CM13.
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
:good:
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
giogio1 said:
:good:
Click to expand...
Click to collapse
Waiting for CM 14.1
http://opensource.le.com
Huawei has finally uploaded the opens source code for all of our devices (the 3 hardware versions).
I have reuploaded it to Google Drive for easier download.
Grab them here : https://goo.gl/DiAj78
Wooooowwww, if that's the sources all is getting great now. Xelfmade, make or phone great again ?
So anybody have the original download link?
Great news! I Assume custom roms etc will become available now once people have built them?
You can get the original downlaods from here : http://consumer.huawei.com/en/opens...Type=openSourceSoftware&pageSize=10&curPage=1
Just search Nova. The download speed was a tad slow.
Huh, i was asking them several times over the past days about the sources. Pleasent coincidence.
Thanks for posting this. Let the fun part begin
Grarak said:
Thanks for posting this. Let the fun part begin
Click to expand...
Click to collapse
Can you PM me? I would like to work with you..
I would like to help, too!
Someone already working on changing of original rom? I'm thinking about trying to modify it for myself.
merlin21 said:
Someone already working on changing of original rom? I'm thinking about trying to modify it for myself.
Click to expand...
Click to collapse
Look this by @Grarak
https://twitter.com/Grarak/status/828231440441700354
pasmadferit said:
Look this by @Grarak
https://twitter.com/Grarak/status/828231440441700354
Click to expand...
Click to collapse
Oh wow Nice! My variant is the CAN-L01 one.
Probably it will work for any variant, even chinese ones.
But my problem is not the rom itself, is the kernel. I'm wanting to learn to mod and compile kernel just for this, as Nova kernel is awful to tweak.
Vinnom said:
Probably it will work for any variant, even chinese ones.
But my problem is not the rom itself, is the kernel. I'm wanting to learn to mod and compile kernel just for this, as Nova kernel is awful to tweak.
Click to expand...
Click to collapse
I know that it will probably work for all variants it's just cool to see my one used as a base for a custom rom.
Do you guys have any guides how to apply these stock roms to unrooted phone? i want to get rid of the carrier crap that's why thinking to apply the stock rom. Thanks.
G3 and G5 got fulmics rom and now they think about G6 !
Our G4 is skipped again hahahaha !!!!
Worst phone Novel earned !
I'll wait until the end of this year and if i don't see a better support i'm gone too !!!
The creator off this rom simply passed from g3 to g5 and so he does't have the g4 to work on, unfortunately
kessaras said:
G3 and G5 got fulmics rom and now they think about G6 !
Our G4 is skipped again hahahaha !!!!
Worst phone Novel earned !
I'll wait until the end of this year and if i don't see a better support i'm gone too !!!
Click to expand...
Click to collapse
G5 port in the works.. almost done. not by me. its 99% done.:good:
raptorddd said:
G5 port in the works.. almost done. not by me. its 99% done.:good:
Click to expand...
Click to collapse
May I ask where you got that information from? Just curious
And what is the port based on? A LG G5 Stock ROM?
---Edit---
Or where you talking about this port that just got released?
---> https://forum.xda-developers.com/g4/development/rom-h-rom-g5-port-t3614857
Mr.FREE_Bird said:
May I ask where you got that information from? Just curious
And what is the port based on? A LG G5 Stock ROM?
---Edit---
Or where you talking about this port that just got released?
---> https://forum.xda-developers.com/g4/development/rom-h-rom-g5-port-t3614857
Click to expand...
Click to collapse
yes thats the one.
raptorddd said:
yes thats the one.
Click to expand...
Click to collapse
Ah alright, seems to be a interesting framework port , I'll may try out the ROM when I have the time...
Mr.FREE_Bird said:
Ah alright, seems to be a interesting framework port , I'll may try out the ROM when I have the time...
Click to expand...
Click to collapse
please do.. let the dev know how much you like his work.:good:
raptorddd said:
please do.. let the dev know how much you like his work.:good:
Click to expand...
Click to collapse
I will let him know for sure, I'm grateful for the dev's who put efforts into such projects for our device.
raptorddd said:
yes thats the one.
Click to expand...
Click to collapse
Mr.FREE_Bird said:
Ah alright, seems to be a interesting framework port , I'll may try out the ROM when I have the time...
Click to expand...
Click to collapse
Did you use this thread where i ask about fulmics rom to talk about g5 ux ? -_-
Anyway. I'm going to port fulmics soon. I just need time cause of my bad network.
Yeah raptor mine is worst. Until i download a rom i have 12 dc and i need 2 days to upload a rom. Thats why i can't sync to a repo in git and have some real fun......
4mbps at its good days............
EDIT:
not porting the android 7 fulmics, im not messing with new drivers and trying to make the drivers that lg wont release. That needs months and im alone i dont have a whole team !
The MM fulmics ill port. Full.
kessaras said:
Did you use this thread where i ask about fulmics rom to talk about g5 ux ? -_-
Anyway. I'm going to port fulmics soon. I just need time cause of my bad network.
Yeah raptor mine is worst. Until i download a rom i have 12 dc and i need 2 days to upload a rom. Thats why i can't sync to a repo in git and have some real fun......
4mbps at its good days............
Click to expand...
Click to collapse
Well I'm sorry to have bothered you, I was just curious.. Didn't mean to take over your thread.
You are going to attempt porting a Fullmics ROM? Nice! Have you already chosen a Fulmics ROM release of a specific device as a base to start with? There are a couple of releases for a couple of different LG devices.
Man I feel ya about your bad internet speeds, if there's anything I could do for you, just say it. I am willing to help or to test something in the future. :good:
Mr.FREE_Bird said:
Well I'm sorry to have bothered you, I was just curious.. Didn't mean to take over your thread.
You are going to attempt porting a Fullmics ROM? Nice! Have you already chosen a Fulmics ROM release of a specific device as a base to start with? There are a couple of releases for a couple of different LG devices.
Man I feel ya about your bad internet speeds, if there's anything I could do for you, just say it. I am willing to help or to test something in the future. :good:
Click to expand...
Click to collapse
Everything will be kept a secret until its 100% tested and working. i'm a perfectionist by nature
not gonna say anything , make promises and then release a buged rom.
kessaras said:
Everything will be kept a secret until its 100% tested and working. i'm a perfectionist by nature
not gonna say anything , make promises and then release a buged rom.
Click to expand...
Click to collapse
I understand that :good:
Good luck with your project!
Mr.FREE_Bird said:
I understand that :good:
Good luck with your project!
Click to expand...
Click to collapse
not luck. im already running fulmics rom. i just need time to perfect it and much much time to upload it when its ready........ in 2 or 3 weeks it will be ready.
i need to add h811 variant. compare it with the h815 to see which ones are needed , which not needed (otherwise the rom will go up to 2,5gb lmao), h811 stock kernel and lastly correct the aroma installer...... thats the hardest part in fulmics. The aroma installer is huge. So forget fulmics rom for now until its 100% working !!!
When its ready it wont even need a single bug fix. I hate bugs.
kessaras said:
Did you use this thread where i ask about fulmics rom to talk about g5 ux ? -_-
Anyway. I'm going to port fulmics soon. I just need time cause of my bad network.
Yeah raptor mine is worst. Until i download a rom i have 12 dc and i need 2 days to upload a rom. Thats why i can't sync to a repo in git and have some real fun......
4mbps at its good days............
EDIT:
not porting the android 7 fulmics, im not messing with new drivers and trying to make the drivers that lg wont release. That needs months and im alone i dont have a whole team !
The MM fulmics ill port. Full.
Click to expand...
Click to collapse
well you asked about no FULMICS beign port to LG G4. and that G4 was dead . did not use this thread. i said regarding the dead development that a new G5 port was in the works. this isnt a FULMICS rom thread rather a Q&A.
so i see no harm there. good luck. we need lots of developers for our G4.:good:
i sspent 1 day uploading...
i failed ...
its so hard to port this... if i use the g3 i can make it boot but with the g4 libs and apps. So it wont even be close to fulmics, it will look like stock.
otherwise i have to learn how to change the apks stracture from x86 to x64...... i don't know how to do that.
If i use the g5 fulmics i don't have android 7 drivers............ i so much wait for those drivers from LG.........
Edit :
It's a notice for the future since we wait nougat these days.
We are not allowed to Port fulmics rom and we will not get fulmics rom. So don't even think about asking or porting it.