Develop Bugs

Sprint Note 2 and CM13 - Sprint Samsung Galaxy Note II

I have no idea if it will happen anytime soon. I am always looking! . . .
What really makes me sad everytime I look at the changelogs from CM is that the Galaxy S3 has CM13. I chuckle . . . and then become sad. I look at my note 2 and feel bad for it.

I have a really rough build of cm13 running on my l900.
No cell service ("No sim card") and Bluetooth doesn't work but it's fast and even the video freeze from cm 12.1 nighties is gone. I'll work on it a little more this weekend though...

ProperNoun said:
I have a really rough build of cm13 running on my l900.
No cell service ("No sim card") and Bluetooth doesn't work but it's fast and even the video freeze from cm 12.1 nighties is gone. I'll work on it a little more this weekend though...
Click to expand...
Click to collapse
That sounds pretty nice. Let me know if you need anything.

any update on this?

Sbrissen was working in it but I'm not sure what's up now.

First official CM13 nightly. Any brave people out there?
https://download.cyanogenmod.org/?device=l900
Sent from my SPH-L900 using Tapatalk

ProperNoun said:
First official CM13 nightly. Any brave people out there?
https://download.cyanogenmod.org/?device=l900
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
It installs and boots up fine. I used open gapps micro and TWRP 3.0.2.0 and of course it was a clean install!

justlookin412 said:
It installs and boots up fine. I used open gapps micro and TWRP 3.0.2.0 and of course it was a clean install!
Click to expand...
Click to collapse
Don't suggest it but a dirty install over CM12.1 works fine in a pinch. ?
Have to fiddle with getting SuperSU through recovery though.

Anyone try Miitomo on CM13 yet?

ProperNoun said:
Don't suggest it but a dirty install over CM12.1 works fine in a pinch. ?
Have to fiddle with getting SuperSU through recovery though.
Click to expand...
Click to collapse
I actually ran into tons of issues that were only solved by formatting the data partition. Do a clean install you will be much happier. One of the weirder ones was rebooting with headphones plugged in.
Sent from my SPH-L900 using XDA-Developers mobile app

Fresh install of today's nightly an no data I had hope. If it wasn't for the camera and video issues I would of been content on 12.1
EDIT:
I have latest cwm recovery
fresh install of 5/24/16 nightly
gapps aroma installer very few gapps kept stock camera.
After I flashed the ROM and gapps I flashed a radio from rwilco's
When I rebooted I said no to fix root(if you click fix root you loose root and the ROM runs buggy)
Enable root in developer options
Install busy box
Profit...
So far no real issues calls text and MMS and data works. sprint vmm installed no force closes on anything.
None of the video playback issues I had on cm12.1.
Issues:
1.I haven't got screen recorder to work it records the videos but can't playback video. Working on trying to get it to work currently. Gonna try finding the apk and reinstalling it.
2. Since cm12.1 I've had and issue with sending and uploading recorded videos with apps. I fixed this by opening the camera app switched the video quality to standard recorded a video then switched it back to 1080 and video upload works fine.
Pics attached of course I've already themed it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Flashed July 1st nightly with the zino fix to get data working and it is smooth a butter
Sent from my SPH-L900 using XDA-Developers mobile app

beansnorice said:
Flashed July 1st nightly with the zino fix to get data working and it is smooth a butter
Sent from my SPH-L900 using XDA-Developers mobile app
Click to expand...
Click to collapse
What's the zino fix? Would it work for Boost Mobile?

Yes it will I used it on my girls d2spr to get data working with boost let me find the link
Edit original post..
I am doing my due diligence to post that I found this ChangeOfJinzoData-APNFix-V1.2.zip which has enabled 3g and 4g LTE for my SGS3 on RingPlus with CM13 5/5 nightly! THIS WAS CREATED FOR THE LG VOLT but it has worked effortlessly for my d2spr. ALSO this is supposed to be made for CM12/13.<br />
<br />
I DID NOT need to do the aforementioned "wipe-flash rom-flash gapps-flash fix-reboot-dirty flash rom-flash gapps"<br />
I simply applied the fix after a clean flash and after gapps. I will say that I fiddled with the *#*#4636#*#* settings but I don't think that was necessary. I only have a day on this but all has been well. I traveled about town and had LTE almost the whole time. For reference the APN settings menu is missing for me. I created an activity to get there through NOVA launcher but no APNs show up - but they are working.<br />
<br />
This also changes your network to say "RingPlus" or "Ting" or whatever you flash with.<br />
<br />
The file is attached to this post with indirect permission from the creator (credit being given).<br />
The link to the creator is here: http://androidforums.com/threads/al...-lg-volt-on-cm13-cm12-other-roms-too.1024839/<br />
<br />
It is said to work with RingPlus, Sprint, Textnow, FreedomPop, Boost Mobile, Ting, Virgin Mobile and you pick with a menu option.

RandomReboot
Hi All. I am loving the fact that i can run Marshmallow on my sprint note 2.
But every nightly i flash ends up giving me Random Reboots.
I end up reverting to CM 12.1. I really want this to work.
Anybody else have this issue and fix it? everything else seems fine.
GPS, Wifi, in call volume, all good. I LOVE the daylight brightness too!!
Anybody got anything on this?? Please?

Bobbaloo said:
Hi All. I am loving the fact that i can run Marshmallow on my sprint note 2.
But every nightly i flash ends up giving me Random Reboots.
I end up reverting to CM 12.1. I really want this to work.
Anybody else have this issue and fix it? everything else seems fine.
GPS, Wifi, in call volume, all good. I LOVE the daylight brightness too!!
Anybody got anything on this?? Please?
Click to expand...
Click to collapse
I have lots of random reboots, especially when using gps navigation or streaming audio over bluetooth. I seen a few other people talking about random reboots but it seems to work fine for others. When I find some time I would like to try to reproduce the error while logging, but for now im hoping someone can get one of the later 12.1 nighties because I can oly find a really old one.

bizmog said:
I have lots of random reboots, especially when using gps navigation or streaming audio over bluetooth. I seen a few other people talking about random reboots but it seems to work fine for others. When I find some time I would like to try to reproduce the error while logging, but for now im hoping someone can get one of the later 12.1 nighties because I can oly find a really old one.
Click to expand...
Click to collapse
the latest snapshot works for me just fine. 20151117 YOG7DAO1K0

Has anyone tried the 7/3 nightly or later?? I had the same reboot issues that you had, so I went back to the stock rom for now...

7/6
MysticGold04 said:
Has anyone tried the 7/3 nightly or later?? I had the same reboot issues that you had, so I went back to the stock rom for now...
Click to expand...
Click to collapse
The last one i tried was 7/6, i had the previous one, had random restarts then dirty flashed the following day the newest nightly, same thing so i reverted to saved backup. TWRP is working great on this now.
Stock? Why stock? KK???
The CM12.1 rom works fine for me.
Its the latest snapshot.

Im on the 7/1 nightly and the only reboot I have is if I'm using data and hit a service deadzone which for me is like twice a week
Sent from my SPH-L900 using XDA-Developers mobile app

Related

After a month, a couple false starts and plenty of soft bricks I am pleased to bring you CyanogenMod 10 for the Samsung Rugby Smart
Please note this is for the Rugby Smart which is a Galaxy W variant. This will NOT run on a Galaxy W.
Links for download / install / other info
Sources
Install Insructions
Download Links / Builds
Status of Features
Thanks to motorhead1991 for all the ideas / research and kernel help
Thanks to nicedream06 for all the ideas / research and testing
Thanks to arco68 for the tips on what needed to be done with the Linux Kernel and making it work with CM10 and for the general work on the Galaxy W which this is based upon. Without his help this wouldn't have been possible
Startup Logo / Animation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
System Info
I am not responsible for anything bad that comes to your device when using the information posted in this thread. Everything here is dangerous, may cause a brick, will void a warranty and has the potential to just plain wreak havoc. Do not complain you followed my instructions and met with a dead device. Consider yourself warned
I've tested to the best of my ability, but I am one person with one device, I cannot catch all potential failure modes. If you find a problem and a fix, or have information that should be added let me know and I will update the necessary information.

Sources
Sources
Please note you will want the 'jellybean' branch and that sources should be checked out with apache substituted for rugby. The device name is apache, not rugby.
Build Instructions / Info: https://github.com/TeamRugby/android_samsung_apache
Sources: https://github.com/TeamRugby

Installation
Install Instructions
The rom should install cleanly over a stock or non-stock rom. It will also work with any of the basebands we are aware of.
Install ClockWorkRecovery or TWRP (See this thread for more information) Without this recovery installation will fail
Download a build from post 4
Copy to sd card
Wipe Data / Factory Reset (Only do this if SWITCHING ROMS)
Wipe cache
Wipe dalvik cache
Install from zip
Select build from sd card
Reboot
Enjoy!
Install gApps as necessary. Given the nature of the installer, I will not be posting links. Check below in the thread / google.
If you need / want google accounts sync / play store / many google apps you will need the gapps installer. I will not be releasing it on this page, it is readily available via a google search

Builds
Goo.im Mirror
There is now a goo.im mirror that will contain the latest and greatest of the items listed below. I will be updating the thread and mirroring to goo whenever there is an update. You can find the files here or within goo manager (available from the play store) under devs/kemonine/apache/cm10.
Builds
Alpha 4 - Release 2
Download link: cm-10-20130109-UNOFFICIAL-apache.zip
Changelog:
Sync with upstream CM10 sources
Alpha 4
Download link: cm-10-20121226-UNOFFICIAL-apache.zip
Changelog:
Resync to upstream CM
Motorhead 3.0 kernel
Greatly improved responsiveness thanks to 3.0 kernel
Alpha 3
Download link: cm-10-20121210-UNOFFICIAL-apache.zip
Changelog:
Resync to upstream CM
Misc fixes merged from arco
Alpha 2
Download link: cm-10-20121126-UNOFFICIAL-apache.zip
Changelog:
WiFi Fix
Alpha 1
Download link: cm-10-20121125-UNOFFICIAL-apache.zip
Changelog:
Initial release

Status Of Port
Untested
Camera Panorama
Tethering (BT/USB/WiFi)
Current issues
SD Card swap (CM10 Limitation)
Orientation sensor
Camera (Alpha 4 breaks the camera due to use of 3.0 kernel)
Working
SMS
Phone
WiFi
Noise suppression option
Wired Headphones
Music Playback
Torch
Front Camera
Bluetooth
Motorhead1991 boot logo
A2DP
BT Headset protocol
Compass
GPS

No one's found this yet, so BUMP. I'm more than happy to help and the big orange button has been pushed. I'm hoping I'm not too far behind with AOKP.

Flashed the initial release and cannot turn on the Wifi. I tried to flash twice but the same result

Hieutt said:
Flashed the initial release and cannot turn on the Wifi. I tried to flash twice but the same result
Click to expand...
Click to collapse
Same issue here, could be something in the kernel iirc
Sent from my SGH-I847 using xda premium
---------- Post added at 04:28 AM ---------- Previous post was at 04:20 AM ----------
Compass and GPS seems to work for me, tethering does not since WiFi is broken, maybe something in the kernel for WiFi to check into.
I love seeing cm10 working none the less on Apache!
Sent from my SGH-I847 using xda premium
---------- Post added at 04:39 AM ---------- Previous post was at 04:28 AM ----------
Also when I try to change the WiFi region to united States it goes back to europe
Sent from my SGH-I847 using xda premium

mviruz said:
Also when I try to change the WiFi region to united States it goes back to europe
Click to expand...
Click to collapse
Thanks for the heads up, you likely just saved me a bit of digging.

Nice work, I'm surely gonna try .

kemonine96 said:
Thanks for the heads up, you likely just saved me a bit of digging.
Click to expand...
Click to collapse
i try to help as much as i can, wifi tethering is out of commission also until wifi works btw, i will test cm10 until monday night, then i will try latest beta cm9 for a few days at work since wifi tethering is useful at times

A build that addresses the wifi issue is up on the goo mirror. I'm uploading to the box mirror now and will update the op in the morning after I get some sleep.
mviruz said:
i try to help as much as i can, wifi tethering is out of commission also until wifi works btw, i will test cm10 until monday night, then i will try latest beta cm9 for a few days at work since wifi tethering is useful at times
Click to expand...
Click to collapse
Thanks for the help testing. If you confirm wifi tethering let us know and I'll update the op.
Sent from my SAMSUNG-SGH-I547 using Tapatalk 2

Wifi works well now, WiFi tetheeing works also, awesome work!!!
Sent from my SGH-I847 using xda premium

Did anyone try Chainfire 3d ? I got the boot loop at CyanogenMod ... so weird ... I tried twice and also the same result with CM10 ...

Hieutt said:
Did anyone try Chainfire 3d ? I got the boot loop at CyanogenMod ... so weird ... I tried twice and also the same result with CM10 ...
Click to expand...
Click to collapse
sorry to say, chainfire 3d is not working on jb yet. it is not weird bro, because all face the same

This is great! Been testing all day and so far only thing I found is the screen auto rotation does not seem to work. Otherwise a great alpha release!
Edit: I realize the orientation sensor was a known issue, just commenting on how well everything else works. Regarding the panorama, I found it to work just fine. The original zip file did not contain a camera app but the one I downloaded from the play store works great with picture, video, panorama, and save to sd card (an issue with cm10 on other devices).
Sent from my SGH-I847 using xda premium

I've been playing around with the vm settings in build.prop a bit. I believe that changing Dalvik.vm.heapsize from 128 to 64 has made things noticeably faster. Anyone else want to test this and report their observations?
Sent from my SGH-I847 using xda app-developers app

Trying the change now, I've noticed the battery life is very good for me, I charged once every two days since going to cm10 so far.
Sent from my SGH-I847 using xda premium

This is awesome! The only problem I have ran into is my GPS won't turn on. it says it is on but the widget says its off and the programs do too. any suggestions?

Snaple4 said:
This is awesome! The only problem I have ran into is my GPS won't turn on. it says it is on but the widget says its off and the programs do too. any suggestions?
Click to expand...
Click to collapse
Try toggling it via the settings application.

///WARNING\\\
I am not a developer or maintainer!
I only compiled the ROM from source and can only attest to it running properly on my Note 2.
I make no guarantees that the zip will even install on your device, nevertheless run without issue.
Be warned that you flash this zip at your own risk and I refuse to take any responsibility for it bricking your phone,
breaking any of your apps, missing calls or unable to make calls,
becoming self-aware and making you it's slave, overheating the battery and making your pants explode,
or any other issue that may not be as likely as these.
\\\WARNING///​
The thread for the official build of Dirty Unicorns for the t0lteatt (http://forum.xda-developers.com/showthread.php?t=2640856) maintained by JMZ hasn't been updated in quite some time and the Dirty Unicorns download site (http://download.dirtyunicorns.com/?device=t0lteatt&folder=Weeklies) hasn't posted a weekly for t0lteatt since July 21, so I chose to build my own flashable zip from source at https://github.com/DirtyUnicorns-KitKat. I have had to make small changes to a couple of source files to get the zip to build, but everything still seems to work just fine, so I figured I'd post it for y'all to have a look at.
If you have any problems, you can go ahead and post your issue here to see if anyone can help you. I wouldn't post your problems in the official thread unless they're also problems faced with an official build. I can't guarantee that I'll be able to help you figure out your issue, or be able to squash any bugs you may find, but I'll try to do everything I can to help.
Of course... Credit goes out to TeamDirt for such a great ROM... JMZ and all the other maintainers who spend their own time to make sure this ROM is available on a variety of devices... All the various projects thanked and credited by JMZ in the official thread (sorry... I'm too lazy to list them myself, but if you feel I should list them, let me know and I will list them in the future)... And all of you who continue to have patience and loyalty with this great ROM. Thank you all!
Flashing Instructions:
* Dirty Unicorns recommends TWRP, but I use Philz Touch recovery and it works just fine.
* Download ROM and GAPPS from the links below.
* Reboot into recovery.
* Full wipe: Wipe cache, dalvik, wipe data/factory reset, clean to install a new rom.
* Flash ROM and GAPPS.
* Reboot into system.
* Enjoy!
Downloads:
ROM Download Link: Click Here
GAPPS Download Link: Click Here
I hope you enjoy this and let me know if you run into any issues. Have a good one!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Just wanted to let you know that your ROM installed without issues on my SGH-317M (Canadian Note II on Telus).
Everything I've tried is working so far.
Thanks!

gorfchris said:
Just wanted to let you know that your ROM installed without issues on my SGH-317M (Canadian Note II on Telus).
Everything I've tried is working so far.
Thanks!
Click to expand...
Click to collapse
+1 I have the same phone except i'm on the koodo network (Telus's little brother)-lol

Nice to see an updated version of a great Rom. Flashed perfectly, and is working great.

Im stuck on bootloop with Agni kernel. You guys running on stock kernel?

Unknownkj said:
Im stuck on bootloop with Agni kernel. You guys running on stock kernel?
Click to expand...
Click to collapse
I'm using stock, so I won't be able to help ya too much... Perhaps someone else will be able to assist ya.

Unknownkj said:
Im stuck on bootloop with Agni kernel. You guys running on stock kernel?
Click to expand...
Click to collapse
I'm running Agni 2.8.3. With no issues. However I did run into issues with 2.8.5.
In Samsung the word Note 2 is pronounced t0lte.

Audio player issues (Google play and music app) only play on home screen, audio muted when app or drawer opened. And I get DSP fc.

jtsin67 said:
Audio player issues (Google play and music app) only play on home screen, audio muted when app or drawer opened. And I get DSP fc.
Click to expand...
Click to collapse
I'm sorry... I'm not able to recreate the issues you are having on my own device. Perhaps it's a bad flash... You could try a full wipe and reflash, or wait and see if anyone else has a better recommendation. Good luck!

AzraelsKiss said:
I'm sorry... I'm not able to recreate the issues you are having on my own device. Perhaps it's a bad flash... You could try a full wipe and reflash, or wait and see if anyone else has a better recommendation. Good luck!
Click to expand...
Click to collapse
Thanks - i did a full reflash and still had the same issue. But, found a setting under main menu options (where you add widgets etc) to turn off Google voice etc. and this seems to have done the trick.

still breaks with the google+ update

jtsin67 said:
Thanks - i did a full reflash and still had the same issue. But, found a setting under main menu options (where you add widgets etc) to turn off Google voice etc. and this seems to have done the trick.
Click to expand...
Click to collapse
Ahhh... That may be the confusion. I never turn on the audio history for Google Now, because it always seems pretty buggy on almost every ROM I've ran since the OK Google Detection from every screen was added. Glad you were able to figure it out and thank you for updating, so we can pass the info along if anyone else has a similar issue. Have a good one!

New build uploaded... https://www.androidfilehost.com/?w=files&flid=18842
You should be able to update with just a cache/dalvik wipe, but if you run into any problems, do a full wipe. Have a good one!

AzraelsKiss said:
New build uploaded... https://www.androidfilehost.com/?fid=23622183712471211
You should be able to update with just a cache/dalvik wipe, but if you run into any problems, do a full wipe. Have a good one!
Click to expand...
Click to collapse
Bossman, am I able to use any pa_gapps instead of the options provided in the OP? Thanks for the great ROM, nonetheless!!

shoeprano27 said:
Bossman, am I able to use any pa_gapps instead of the options provided in the OP? Thanks for the great ROM, nonetheless!!
Click to expand...
Click to collapse
I don't see why not. pa_gapps seem to be what most of the official maintainers of the ROM recommend and copies from August 10 are even hosted on the Dirty Unicorns download site. Give it a try and let us all know how it turns out. Have a good one!

Works great with latest PA Gapps, agni v2.8.5

Duskycub said:
still breaks with the google+ update
Click to expand...
Click to collapse
I didn't have any problems with the G+ update and I purposefully installed the update while the rest of my apps were downloading and updating, just like what used to cause the repetitive System UI FCs for me in the past on the official build. Perhaps it's a problem with the GAPPS you're using. I'm using the du_tbo-gapps, but I can only comment on using them with the total black out mode set. Which GAPPS are you installing?
You could try the pa_gapps micro or nano packages, as neither of these contain a copy of G+ and then install G+ from the play store (if you want to). Another work-around may be to not accept the G+ update. I know on my device, I have to implicitly install the update. Let us know how things work out for ya... Have a good one!

So I noticed that with any other kernels, the WiFi doesn't stick. Even sometimes, WiFi won't work at all. I figured leaving the stock kernel alone, it rums well.

AzraelsKiss said:
I didn't have any problems with the G+ update and I purposefully installed the update while the rest of my apps were downloading and updating, just like what used to cause the repetitive System UI FCs for me in the past on the official build. Perhaps it's a problem with the GAPPS you're using. I'm using the du_tbo-gapps, but I can only comment on using them with the total black out mode set. Which GAPPS are you installing?
You could try the pa_gapps micro or nano packages, as neither of these contain a copy of G+ and then install G+ from the play store (if you want to). Another work-around may be to not accept the G+ update. I know on my device, I have to implicitly install the update. Let us know how things work out for ya... Have a good one!
Click to expand...
Click to collapse
i redownloaded the du_tbo-gapps and the size was different from mine so i did a fresh install and then updated gplus and omg it worked thank you so much for this updated rom love it.

Does this rom have sound on charge like other roms I don't see it in options

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS AN UNOFFICIAL BUILD OF LIQUID LOLLIPOP AND NOT SUPPORTED BY THE NORMAL DEV TEAM. SO IF YOU FIND A BUG, DON'T ASK THEM FOR ANY KIND OF SUPPORT. IF YOU ARE LOOKING FOR THE OFFICIAL LIQUID LOLLIPOP, YOU CAN FIND THAT HERE.
Here is a build I put together today of LiquidSmooth v4.0 (Android 5.0.1). I build unofficial builds for one of the S2 variants, and having the d2att S3, I figured I would build it for it too. And since it worked, figured I would just drop it here.
THINGS TO NOTE
ABOUT THE ROM
This build does not use the Material Dark theme that the official Liquid Lollipop uses it. I reverted it to Material Light in some places just because I prefer it. There are still a few system apps and places you will find the darker theme, but most of the ROM is light. Camera is a little off still. Works for some, doesn't for others. I recommend Open Camera from the PlayStore. Pictures work flawless with it.. Video will cause FC.. Wifi, Mobile Data, etc are also working. As far as bugs, I'm sure there are some, but being early in the Lollipop era, it should be expected.
ABOUT THE KERNEL
The D2-Shift that I recommend to use with this comes from the awesome @rogersb11. It's built with Linaro GCC-4.9.1 and includes the faux sound mod (thanks to @faux123). When flashing the kernel, it will install Stweak kernel control app. HOWEVER Stweaks support is not complete yet. So use Trickster or whatever kernel control app you wish with it.
DOWNLOAD AND INSTALLATION
THAT USUAL DISCLAIMER STUFF
Yup, you knew this was coming. Neither I nor anyone else including, but not limited to, my wife, kids, your neighbor, or that annoying Fluffy the cat down the road are responsible to damage to your phone while flashing this. This includes, soft brick, hard brick, one brick, two brick, red brick, blue brick. ALSO, I built this specifically for the d2att variant. If you want to try it on another d2 variant then you do so at your own risk. It's up to you to know if it can work and how.
DOWNLOADS
Unofficial Liquid Lollipop from this link right here.
Gapps from this here link (or 5.0 Gapps of your choice)
Shift-D2 Kernel can be found here.
Update SuperSU (thank you @Chainfire) from the link you can click on right here.
INSTALLATION
1) BACK THAT THANG UP! Seriously, it never hurts.
2) Factory Reset, Full Wipe
3) Flash ROM, Gapps, Kernel
4) Flash Update SuperSU
5) Safety Wipe of Dalvik (ART now)
6) Reboot
SPECIAL THANKS
First and foremost thanks to the entire LiquidSmooth team because of course, without them, this wouldn't exist. I always have to thank @rogersb11 like my life would cease without him. Seriously though, the kernel is all his building, and the help he has given me over the last little while as I learn how to build from source. Say thank you to the man, would ya? Thanks to @bob24260 who first introduced me to Android and rooting and all that fun stuff a long time ago, and who also took that nervous step of being the first to flash this with me.
DEV INFO
ROM: LiquidSmooth v4.0
ROM Source: LiquidSmooth Github
Kernel: Shift-D2 by @rogersb11
Android Version: 5.0.1
ROM Status: Unofficial Alpha​

No Thank you!
I've had the distinct pleasure of knowing GeekyNimrod for a while now in "real" life and I also had the pleasure of being the first to flash this.I'm loving it.Great job Geeky.I may have been the person to introduce Geeky to Android but I've always been old school gingerbread person.Geeky changed that with his work.I'm absolutely in love with this build.Camera straight out of the "box" so to speak.Once again great job and I look forward to future builds.In my thread title it says No thank you,it should have said No,thank you!Was thanking Geeky not criticizing as the lack of comma implied.Overlook me,I'm a doofus.
Oh yeah,First!!!!Lol

Camera working in this build?

Yes it is

Maheshzx said:
Camera working in this build?
Click to expand...
Click to collapse
For pics, yes. Video, no.
Sent from my SAMSUNG-SGH-I747

I was just getting ready to clarify

Hardware repo should be good to go. Video MOST LIKELY comes from a d2 common repo. IDK tho, I don't have this device and my N2 is Exynos not Qualcomm

not taking pics also,It took a pic first time,next time it stopped working,the focus circle stuck and it won't take pictures
there's no file manager!

Maheshzx said:
not taking pics also,It took a pic first time,next time it stopped working,the focus circle stuck and it won't take pictures
there's no file manager!
Click to expand...
Click to collapse
Try clearing data on camera in settings,reboot to recovery and wipe dalvik (ART)and cache.Its worked for me on similar issues before.Camera is working fine for me.As far as file manager there's plenty to choose from in the Play store.

I found Clear Dalvik cache,but why you mention (ART)
I do not find such option in my TWRP 8

Flash failed. Re-downloading now.

Maheshzx said:
I found Clear Dalvik cache,but why you mention (ART)
I do not find such option in my TWRP 8
Click to expand...
Click to collapse
There is no dalvik on Lollipop.When you clear dalvik in recovery you are actually clearing ART.ART stands for Android Run Time.It replaced dalvik.

[QRCODE][/QRCODE]thanks for your quick reply!
Everything working fine,But hoping to get a working "camera" soon.
btw How to disable Volume boost?

Maheshzx said:
[QRCODE][/QRCODE]thanks for your quick reply!
Everything working fine,But hoping to get a working "camera" soon.
btw How to disable Volume boost?
Click to expand...
Click to collapse
Not sure what you're referring to on volume boost.As far as camera,if its not working for you I would suggest Open Camera on the Play Store.Its free and it should work for you.

open camera has video recording working?

Maheshzx said:
open camera has video recording working?
Click to expand...
Click to collapse
Don't know.Never tried.I'm only speaking on the camera.

Hah,reverting back to 4.4 because I cannot get my camera to work!
Because I need the camera mostly on my mobile.
Anyway thanks

Maheshzx said:
Hah,reverting back to 4.4 because I cannot get my camera to work!
Because I need the camera mostly on my mobile.
Anyway thanks
Click to expand...
Click to collapse
Don't know why your were having camera issues, but mine has taken pic after pic with no problem. File managers can be downloaded from the PlayStore.
As for video recording, a read of the OP would have told you it wasn't working.
Sent from my SAMSUNG-SGH-I747

TyJones916 said:
Flash failed. Re-downloading now.
Click to expand...
Click to collapse
What recovery are you using?
Sent from my SAMSUNG-SGH-I747

Yeh,I downloaded Es file manager.But Camera sometimes stuck,or stop taking pics,some times says can't connect to camera>

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello guys, This is my port of the awesome Euphoria-OS.
I stopped supporting this rom
but as of 13th sept 2015, I am back ​
DOWNLOADS​
You can click here DOWNLOADS for the ROM
GApps here (5.1 only)
THIS ROM SUPPORTS LVM, COLDBIRD Unification and Stock.
Installation Instructions
- Make sure you're running Nameless TWRP Recovery
- Make sure you updated your modem (Flash latest CM nightly)
- Make sure you updated your TrustZone firmware (Install latest CM nightly for it)
-No need to flash any modem or any CM nightly. Modem is now included in the ROM
- Copy GApps and ROM to your internal/external SDCard
- Boot into Recovery
- DO A DATA WIPE / FACTORY RESET
- Flash Euphoria-OS zip
- Flash GApps zip
-Flash Supersu
- Reboot and profit!
LVM UNIFIED
To set up LVM, download this zip and flash it via recovery
To remove LVM, download and flash this zip
COLDBIRD UNIFIED
We are offering unified versions, using Coldbird's unification method. Please have a look at
this thread (http://www.oppoforums.com/threads/tutorial-unified-storage-layout-for-oppo-find-7a.17952)
​CREDITS​Euphoria-OS Team
CyanogenMod
Euphoria-OS Team​
XDA:DevDB Information
[5.1] Euphoria-OS, ROM for the Oppo Find 7a
Contributors
suraj.das
Source Code: https://github.com/Euphoria-OS-Legacy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest CM12 Firmware/Modem
Based On: CyanogenMod

Just in case..

Nice, I was planning on making it, but you were faster.
Definately going to give it a try.

your device trees sure helped a lot

Wow yet another port , freking great
Dl ......
Thx a lot

What kind of storage does that rom use ?
Vanilla ?
Unified ?
LVM ?
None of the above ?
thx a lot for bringing more choice to our Find7

theradec said:
What kind of storage does that rom use ?
Vanilla ?
Unified ?
LVM ?
None of the above ?
thx a lot for bringing more choice to our Find7
Click to expand...
Click to collapse
stock partition only..
but it might change in the future..

What a beast you are

New build is up guys! Use the first "download" link in OP to get it.. ill be uploading on the second link too, in a minute!!
Changes - Check Euphoria's gerrit.
Sync was done like 7 hours back!
Used a new toolchain. UBER TOOLCHAIN 4.8 for ROM and 4.9 for kernel!
Everything is frikking smoother and faster now.
SELinux is set to permissive. I like it that way.
I am still looking to implement LVM. Might take time. I am a NOOB

I've tried both beta's and they both run extremely smooth. Only problem I've had with both is when someone sends me a text I get unfortunately messenger has stopped on both beta's. I've tried clean installs on both coming from nameless then tried clean install coming from cyanogen 12. Tried cleaning data and cache from messenger app but nothing has worked. Everything else has worked but receiving texts. Correct APN was verified so I'm at a loss.

JRW 28 said:
I've tried both beta's and they both run extremely smooth. Only problem I've had with both is when someone sends me a text I get unfortunately messenger has stopped on both beta's. I've tried clean installs on both coming from nameless then tried clean install coming from cyanogen 12. Tried cleaning data and cache from messenger app but nothing has worked. Everything else has worked but receiving texts. Correct APN was verified so I'm at a loss.
Click to expand...
Click to collapse
I can say, I am experiencing the same. Using Google Messenger for the meantime.
Smooth builds.

carlsbad28 said:
I can say, I am experiencing the same. Using Google Messenger for the meantime.
Smooth builds.
Click to expand...
Click to collapse
I've seen where people were having same issues with cyanogen 12.1 as well so might be an underlying issue there. Wish they could get it resolved for what time I've played with this ROM I'd love to give it more time as a daily driver but I need to be able to receive texts. Other then this issue the work looks very good and promising.

WiFi is broken when flashing SuperSU for root.
ROM worked fine prior.

carlsbad28 said:
I can say, I am experiencing the same. Using Google Messenger for the meantime.
Smooth builds.
Click to expand...
Click to collapse
JRW 28 said:
I've tried both beta's and they both run extremely smooth. Only problem I've had with both is when someone sends me a text I get unfortunately messenger has stopped on both beta's. I've tried clean installs on both coming from nameless then tried clean install coming from cyanogen 12. Tried cleaning data and cache from messenger app but nothing has worked. Everything else has worked but receiving texts. Correct APN was verified so I'm at a loss.
Click to expand...
Click to collapse
sorry guys. I didnt get that error because I install Hangouts as soon as I boot a new rom.
I will try to see what the problem is.
Next build will come in a day or two. My exams are on so thats why.
Lets hope its fixed on the build. Btw I uploaded a new build on AFH. You could try that for the time being

carlsbad28 said:
WiFi is broken when flashing SuperSU for root.
ROM worked fine prior.
Click to expand...
Click to collapse
which version of supersu? No one else has reported this bug. Could be an issue on your end?

suraj.das said:
which version of supersu? No one else has reported this bug. Could be an issue on your end?
Click to expand...
Click to collapse
Same here, after deep sleep , wifi is gone and need reboot , then it's working again!
Super su 2.46
Thanx for a great build
(Just flashed beta 2.48, wifi speed is back at normal again, it was extremely slow and sluggish on 2.46?)

spoonymoon said:
Same here, after deep sleep , wifi is gone and need reboot , then it's working again!
Super su 2.46
Thanx for a great build
(Just flashed beta 2.48, wifi speed is back at normal again, it was extremely slow and sluggish on 2.46?)
Click to expand...
Click to collapse
Thanks, will try out 2.48
Everything actually works at first boot. ROM backups my apps through cloud. But after restarting, WiFi breaks and am unable to fix the issue until I do another clean install. Only happens on 5.1, can't replicate it on 5.0.2.
EDIT: Scratch that, I actually flashed 2.48 :banghead: Wonder what the issue is.

carlsbad28 said:
Thanks, will try out 2.48
Everything actually works at first boot. ROM backups my apps through cloud. But after restarting, WiFi breaks and am unable to fix the issue until I do another clean install. Only happens on 5.1, can't replicate it on 5.0.2.
EDIT: Scratch that, I actually flashed 2.48 :banghead: Wonder what the issue is.
Click to expand...
Click to collapse
is it working now?

Wifi works with 2.48, but no way rom will enter deep sleep!
Even changing sleep mode in kernel tweaker doesn't change anything!

spoonymoon said:
Wifi works with 2.48, but no way rom will enter deep sleep!
Even changing sleep mode in kernel tweaker doesn't change anything!
Click to expand...
Click to collapse
This deep sleep problem is really weird. Which gapps do you use?
I am using the gapps that I linked in the OP. and phone enters to deep sleep just fine

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM12.1 is here for the LS980, aka the Sprint LG G2.
This is a source build rom, which includes all the latest changes from cm. The nightlies are starting August 2nd.
Instructions
Official support is now limited to ZVE and ZVG basebands. CM-12.1 is based on a completely new kernel. This has enabled support for the latest basebands newer than ZV8.
While many people and devices are in various states we officially recommend flashing back to stock then fully updating your device before using cm-12.1.
If you are coming straight from cm-12.0 the rom will not boot.
Download cm-12.1, and gapps. Put them on your sdcard, reboot to recovery. Flash, and enjoy!
The latest will be available at:
http://get.cm/?device=ls980
Gapps:
Official CM ones (soon):
http://wiki.cyanogenmod.org/w/Google_Apps
Click to expand...
Click to collapse
Known Issue
None!
Click to expand...
Click to collapse
Change Log
Click to expand...
Click to collapse
Special Thanks To!
None of this would be possible without the following people:
rashed
acree
Click to expand...
Click to collapse
Source
http://github.com/CyanogenMod
Click to expand...
Click to collapse

sweet, been waiting for this! but-- latest nightly is from 7/26, and is only version 12, not 12.1, and no google apps? seems a bit preemptive to me

Downloaded and installed nightly from 08-04. Flashed over stock rooted ZVG then a full wipe.
good:
GPS seems to be much more responsive with cm12.1.
bad:
camera app wont open, downloaded google camera and others from the play store, nothing works.
no flashlight shortcut in quick settings panel, when i try to turn on via "OK google" causes force close. this is a really useful tool for me and its bumming me out its not included here, or in stock ZVG

Shiny, may be able to abandon the official firmware (again) a bit later when things are a bit more stable.
Anyone have any reports on if the screen double tap to wake works?

Can't wait to flash this. Been having issues updating past 5/17 on CM12.
After fighting with ZVG to get root it's all working. 7-17 Gapps was giving me issues though. Downgraded to 4-21.

Fnord12 said:
Shiny, may be able to abandon the official firmware (again) a bit later when things are a bit more stable.
Anyone have any reports on if the screen double tap to wake works?
Click to expand...
Click to collapse
Double tap didn't work on older versions, but you can tap 5 times to wake in the version I'm using (I don't know why it's 5... but that has worked reliably for me)

Hi everyone, Just when i think i am starting to understand this stuff i become a newbie again. I am running cm12 on my rooted LS980 with recovery installed and no sim at the moment want to update to CM 12.1 but what i understand is I just cant flash it like other nightlys. Is that true and if then what do i do to get 12.1 flashed on my device. I have tried to flash it like any other one but i get a big fail. Thanks for the help !!!

larryb1951 said:
Hi everyone, Just when i think i am starting to understand this stuff i become a newbie again. I am running cm12 on my rooted LS980 with recovery installed and no sim at the moment want to update to CM 12.1 but what i understand is I just cant flash it like other nightlys. Is that true and if then what do i do to get 12.1 flashed on my device. I have tried to flash it like any other one but i get a big fail. Thanks for the help !!!
Click to expand...
Click to collapse
Tot to kitkat, take lollipop ota. Root, autorec then flash 12.1

ok thx i assume tot to kitkat with lg flash tools is that 4.4.2 what vrsion of stock is reccomended? then take lollipop ota which i assume is 5.0 root with???????? autorec for twrp and then flash 12.1/. Correct?????

larryb1951 said:
ok thx i assume tot to kitkat with lg flash tools is that 4.4.2 what vrsion of stock is reccomended? then take lollipop ota which i assume is 5.0 root with???????? autorec for twrp and then flash 12.1/. Correct?????
Click to expand...
Click to collapse
If you tot to any version of kit kat the phone will update to lollipop. Paste this address into your browser for root tool. http://sourceforge.net/projects/avicohh/files/Android/LG_One_Click_Root_by_avicohh.exe/download. Sorry, don't know how to put link in post as of yet. Autorec file is specific to sprint. File name is something like omg so good version. Autorec will take care of everything else for you. Then just flash 12.1 and gapps normally.

What gapps version are you guys using with 12.1? Initially I flashed 7-17 but ran into issues with the Play Store being unable to download/install any apps. I flashed 4-21 and now I get occasional, seemingly random vibrations, sometimes up to 30 seconds long. Doesn't seem to interfere with operation though.

JWFokker said:
What gapps version are you guys using with 12.1? Initially I flashed 7-17 but ran into issues with the Play Store being unable to download/install any apps. I flashed 4-21 and now I get occasional, seemingly random vibrations, sometimes up to 30 seconds long. Doesn't seem to interfere with operation though.
Click to expand...
Click to collapse
IM Using tk_gapps-stock-5.1.1-20150809-signed and have had no problem

Is the camera working? How is this not reported in the OP under "known issues".
double tap to wake worked fine for me, by the way

thehawdis said:
Is the camera working? How is this not reported in the OP under "known issues".
double tap to wake worked fine for me, by the way
Click to expand...
Click to collapse
Camera is working for me on 8/10 with a clean install over ZVG.

Edit: Moved to Q&A area

Good thing this phone is still being updated.

Anyone using this on freedompop? its a prepaid service that uses sprint towers.. works great on my stock rom, 3g,lte, but on cyagenmod, i only get 3G, i tried flashing an apn fix i found, but didnt help..

Ok so just installed latest nightly (9/2) and knock-on not working. This was working in previous nightly I tried. Also, no superuser? or no root?

Hey guys, iv been trying for the past couple of hours for cm12.1 to work with 5.1 gapps, but google pay services always crash non stop, iv tried several different gapps and they all crash.
edit: nvm got it fixed.

ebowen 747 said:
Tot to kitkat, take lollipop ota. Root, autorec then flash 12.1
Click to expand...
Click to collapse
What tool do you use to tot to kitkat? The LG Flash Tool will not recognize device model anymore after you flash CM12.1 nightly.