When trying to change my SIM Card pin my phone just locked up and went to a screen that says:
Emergency Calls Only
Please see the User Guide or contact Customer Care.
It's on T Mobile UK and has been fully rooted, and is running the latest CM7 build.
When i go to enter the PUK code, it allows that but does not come up with an option to click next, and when i press dial it just tells me that it's not an emergency number.
Any ideas?
I have worked it out. If anyone else has this problem then this is how i solved it:
Tap Emergency call and enter the following sequence using the keypad: * * 0 5 * [PUK] * [new PIN] * [new PIN] #
Click to expand...
Click to collapse
Thanks to fleurperkins from androidforums.com
Issue:
No BT call.
Broken audio in VOIP (viber,skype,teamspeak etc). Tinyalsa would fix that, but it breaks calls.
Mic key (voice search) works, you need to enable: settings -> system -> hardware keys -> enable custom actions (check) and app switch set to voice search.
To get home key logn press action: settings -> system -> hardware keys -> enable custom actions (check) and home key (long press) set to Recent app switcher
When you upgrade, phone app may not work, you must remove the shourtcut, and readd. (thanks scotte9999)
Sometimes it stuck boot logo (cm,samsung,roger), please remove the battery and wait atleast 5 minutes,
Offline charger, you can leave with removing charger and holding power button for 2 sec, and glide will boot.
Liblight works very simple, when your lcd birghtness low buttons and keyboard light is on. You can use qwertyled or other liblight,read more.
Slow storage performance in some apps.
download
http://dualhoki.vim.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
http://rpi.bubor.hu/bubor/dev/pac_i927_4.3.Build-1_20140225-111215.zip
changelog
20130912: phone encrypt support
20130913: BT LPM support, overclock support
20130921: PACMAN update
20130925: camera and charger
20131002: www/com key fix
20131007: PACMAN update
20131018: keyboard arrow fix
20131028: vibration intesity
20140102: just PACMAN update
20140225: just PACMAN update, I havent tested.
install
factory default
install zip
gapps included in my zip file, you dont need to install any gapps
reserved
can´t swap SDCards
edit /sysrem/build.prob and add:
Code:
# Change to 1 for swapping SD cards
persist.sys.vold.switchexternal=1
below
Code:
# Storage configuration
ro.vold.switchablepair=/storage/sdcard0,/storage/sdcard1
You can use recovery installable zip: http://dualhoki.vim.hu/bubor/dev/swap-internalsd-externelsd.zip
gyroscope fix
power off the phone (better remove battery for sure), put on a desk, power on and wait, it shoud calibrate itself.
Credits:
* tonyp https://github.com/tonyp/android_vendor_google
* Epsylon3 https://github.com/tpruvot/android_device_samsung_i9103
* kick buttowski
* Adam77Root
* yohan4ws
* gtmaster303
* The-Covenant team
* dman3285
* thegreatergood
* spyke555
yippppy downloading right now
thanks bubor, looks great
How do I make the keyboard lights work ?
---------- Post added at 03:18 AM ---------- Previous post was at 03:14 AM ----------
greeneyez15o said:
How do I make the keyboard lights work ?
Click to expand...
Click to collapse
nvmd
Do I need to download gapps for this? Or is it included?
Kombatant said:
Do I need to download gapps for this? Or is it included?
Click to expand...
Click to collapse
included, original gapps doesnt compatible with tegra2 devices.
Thanks for the quick reply man, flashing as we speak; haven't updated my ROM in ages Will report back any findings.
edit: Apart from some text to speech crashes, everything's peachy so far
so far so good gooodwork!
flashed, no problem so far (except the known issues). No lag wake or delayed-until-wake SMS seen, but i've just flashed the ROM for 12 hours so I can say that they are reduced, but i'm not sure if they are fixed or not. I prefer the old style quick setting button, but this is good tho
Wow, I was surprised at how functional this was for how new the thread is.Everything I've tried has worked with no issue (basic functions, data, a2dp bluetooth, sd card, wifi, gps). going to try and Wifi tether and actually trying to use the "phone" functins when I get a chance.
One thing so far, I don't think this has been said, is that the recents takes forever to pop up (like 6-7 seconds!). I tried remapping it away from the home button, but it still didn't speed up.
Also, where do I customise those handy shortcuts in the recents? and wtf is a ribbon?
it looks like there's some problem with the WiFi toggling.
Action: pressing the WiFi button on quick setting panel and the quick pulldown menu
Expected result: the button flipped and show the new icon indicate that the WiFi has been turned on
Actual result: the button flipped, but the icon is still the old one (it's the icon when WiFi is off)
I tried going to setting and press the WiFi button, it switched from "Off" to "On" and stayed there for about 10 seconds, then switched bak to "Off" again.
It's pretty rare 'cause I only met this twice after 2 days using, a reboot will solve the problem.
Tyfighter said:
Wow, I was surprised at how functional this was for how new the thread is.
Click to expand...
Click to collapse
Seconded and signed, this is a quality release from the get go. Cheers man!
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
PghSportsGuy said:
Question for you, since I am currently running PAC do I need to do a complete wipe/reset prior to flashing this update?
Click to expand...
Click to collapse
better, but not must.
Phone app changed, so you must remove shortcuts and readd.
Bug: when you try to use the navbar widgets, the system UI get crash.
Sent from my SGH-I927 using xda app-developers app
Today I got a lot of "Cell Broadcasts" messages, contents are unreadable (only weird symbols), this ended after a reboot, anyone ?
BTW, when plugin in the charger while the phone is off it displays a charging icon (a circle with a battery), normally it will automatically turns on the phone when the battery reaches - let's say - 15%. But to this ROM it doesn't, I have to do a manual reboot.
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
dadashi.reza said:
hi
help
I can not download apps from google play
expl:
facebook could not be download due to an error. (error retrieving information from server . [RPC:S-5:AEC-0])
Click to expand...
Click to collapse
did you do full wipe install?
bubor said:
did you do full wipe install?
Click to expand...
Click to collapse
yes dear bubor...
I had to flash 4.2.2
4.3 rom after reset stay on rogers logo
Greetings to all. There is a Samsung GT-I9195 Galaxy S4 Mini LTE, operator MTS, sim with support for 4G (tested on another phone - LTE appears at once), the firmware 4.4.2, item selection LTE / WCDMA / GSM in the Settings menu is selected, but the phone in any does not want to catch 4G.
Also there is a strange feature in the service menu, in which I go through the program Advanced Signal Status (incidentally a good substitute command * # * # 4636 # * # * which is closed in the latest firmware), do not select LTE only, not selected EvDO only .
Can someone tell me what is the problem and how to fix it?
Try flashing a stock ROM again.
install different firmware was 4.2.2 and 4.4.2, and the result of the same everywhere, do not select LTE only, not selected EvDO only
Hi
I have a s6 edge from us cellular (cdma) is there any way to turn on the option for gsm as the only option i have in settings is LTE/CDMA.
Im rooted, but now I'm stuck.
Thanks
Google is your friend , i googled gsm unlock us cellular s6
Copied from there teamuscellular dot com
ayfi18 May 2015
Anyone interested in unlocking their S6 it's fairly simple. Root and activate the hidden menu (directions are in xda verizon thread) and from the menu you can enable GSM. I have fully working voice,text and edge/LTE data. I have only tested on T-mobile
GUIDE TO GSM UNLOCK S6:
* Root Phone (Use Ping Pong root)
* Enable service menu
* Insert GSM SIM card
* Dial *#27663368378# -This will put you in service mode
* - UE Settings & Info
- Settings
- Protocol
- NAS
- Network Control
- Band Selection
* Make these selections above
* *Make sure you use the more button in the upper right corner to go back if needed(Back Key on phone will exit menu)
* Choose choice 7 “LTE/GSM MODE ONLY”
* Reboot
* Go to settings/Wireless & networks/more and it will allow you to add the correct APN
* Change preferred network type to LTE
Let me know if you need clarification. I don’t have the phone in front of me currently but am pretty certain that is everything