I am looking for a Car Charger that will fit for the Galaxy 10.1.
any recommendations?
Thanks!
Hello.
I picked up this charger (EZOPower 6ft 2-in-1 Samsung Tablet Data Charging Cable plus AC & Car Charger Power Adapter for Samsung Galaxy Note 10.1) from Amazon and it works just fine. You also get an extra long cable with it. Hope this helps.
Cheers!
I bought (Samsung Galaxy Tab Detachable Car Charger with USB to 30 Pin Data Cable) from Amazon for 13 bucks. You basically get a car charger with a usb slot that comes with the data cable for the Tab/Note. So you can use the charger for your phone or other USB devices if you just swap out the cable.
Would someone with a TabPro 10.1 please answer the following charging questions?
How long does this tablet take to fully charge from 25% or less charge?
If you attach a micoUSB OTG cable to a powered USB hub will the tablet still charge while using a device (USB harddrive, SDCard reader ... etc) that is also attached to the powered USB hub?
Can a microUSB OTG Y Cable concurrently charge from the standard USB charger and run an OTG USB device (e.g. SD card reader)?
I'm asking as I currently use a Nexus 10 attached to a powered hub with a USB ethernet adapter attached. Unfortunitely the Nexus 10 does not utilize the charge provided by the powered USB hub and looses charge. In this set up the powered hub only helps to power the Ethernet adapter so overall the Nexus 10 does not discharge due to the Ethernet adapter. I am hoping the TabPro 10.1 has a better charging implementation than the Nexus 10.
FYI: The Nexus 10 will not charge from its pogo connector when the micoUSB port is being used for charging or with an OTG device. The charging notification falsely indicates the device is charging.
Thanks for anyones insights.
I would like to know this too. I've purchased and the Note 10.1 2014 and this is the only issue I have with it is the lack of support for charging and USB OTG use. If the Tab Pro 10.1 or even 8.4 can charge with OTG I may exchange the Note. Thanks!
I just tried an OTG Y cable, it wont charge. I also tried a trick that worked on my lenovo windows 8 tablet where you turn the tablet off, turn it on with charger in, rip out the charger and plug in the OTG cable before it fully boots and then connect the charger to the OTG cable which allowed OTG+Power, didn't work on the tab.
IIRC this is something that can only be changed by a kernel modification as I think the old 2012 Nexus 7 could do this with a custom kernel, but I could never find a working download.
EDIT: Tried on my Tab Pro 8.4 running latest CM nightly
I am installing my Pro 8.4 in the dash of my car. I have to plug a 90° cord into the tab for space considerations. The one I found is OTG. I don't plan on using accessories, only to charge.
http://www.amazon.com/IVSO-Micro-Ca...le+(OTG+Cable)+For+Samsung+Galaxy+Tab+Pro+8.4
Will this cord pass through the 2.1A I need for charging only?
Hello,
As explained in title, I am looking for a 3-4 usb hub that supports otg and can charge the Nexus 7 at the same time at full voltage, without drain.
Any ideas? thanks
Deeco7 said:
Hello,
As explained in title, I am looking for a 3-4 usb hub that supports otg and can charge the Nexus 7 at the same time at full voltage, without drain.
Any ideas? thanks
Click to expand...
Click to collapse
Yes http://www.ebay.com/itm/201372917160
but I'd prefer http://www.ebay.com/itm/191859127277
You will also need a kernel
What are you trying to accomplish
k23m said:
Yes http://www.ebay.com/itm/201372917160
but I'd prefer http://www.ebay.com/itm/191859127277
Click to expand...
Click to collapse
I have both, but it didn't output enough maH, wouldn't go above 300
deadgiveaway said:
You will also need a kernel
What are you trying to accomplish
Click to expand...
Click to collapse
Forgot to mention, I'm doing a car install. I'm currently using Elementalx Kernel with Otg charge enabled.
hi there, im crazy with this
i got a nexu 7 2013 wifi, as like you I use CM 13 with elementalx installed and otg and charge enable.
i use a Y cable, a hub cable too and any works.
if someone can explain or tell me why.....i need it for my car
rhipone said:
hi there, im crazy with this
i got a nexu 7 2013 wifi, as like you I use CM 13 with elementalx installed and otg and charge enable.
i use a Y cable, a hub cable too and any works.
if someone can explain or tell me why.....i need it for my car
Click to expand...
Click to collapse
Otg splitter and hub is so you can power your tablet and any devices that are connected to the hub .. Ex. Joycon , video grabber , dac ...ect
Timurs kernel is the most reliable but you have to donate to get it ... Elemental is free but sometimes has issues with otg/charge bugs upon wake
You need the ability to enable Fast Charging for the kernel.
Simple USB-OTG won't get you full charge speed.
I know Timur's kernel for 2012 model has a Fast Charge option that is probably also available on the 2013.
And ElementalX kernel *might* be getting that option soon too, if not already.
deadgiveaway said:
Otg splitter and hub is so you can power your tablet and any devices that are connected to the hub .. Ex. Joycon , video grabber , dac ...ect
Timurs kernel is the most reliable but you have to donate to get it ... Elemental is free but sometimes has issues with otg/charge bugs upon wake
Click to expand...
Click to collapse
i got a micro usb with female USB, i connect a male USB to USB male from the female of the micro usb to the hub, and the USB of the hub to de car charger, and tablet wont charge.
so...
nexus 7-micro usb male to usb female-usb male to usb male- hub-usb hub to power supply
in the hub i got one pendrive
rhipone said:
i got a micro usb with female USB, i connect a male USB to USB male from the female of the micro usb to the hub, and the USB of the hub to de car charger, and tablet wont charge.
so...
nexus 7-micro usb male to usb female-usb male to usb male- hub-usb hub to power supply
in the hub i got one pendrive
Click to expand...
Click to collapse
You need to install a kernel for otg and charging ....
Two options
Elemental kernel ....slightly buggy loses charge on boot
Timurs kernel ...works flawless ... But you have to donate ...
deadgiveaway said:
You need to install a kernel for otg and charging ....
Two options
Elemental kernel ....slightly buggy loses charge on boot
Timurs kernel ...works flawless ... But you have to donate ...
Click to expand...
Click to collapse
i got elemental X, with Y cable and wireless charge, doesnt work, if I plug something on USB port, the tablet stop charging, I use CM firmware so I suppouse to install elementalX CM kernel, right?
Not sure what roms are compatible with elemental x.... I use stock android with timurs ...xposed can do everything i need as far as custom ...
is there a kernel or ROM that allows the nexus 7 (WiFi) to be charged wireless while OTG is in use? I'm trying to install it in my car and need my phone plugged into it via OTG. but I would like to charge wirelessly. I think I can get OTGy cable to work if it comes down to it.
Thats not possible
itm/Micro-USB-Host-OTG-Cable-with-Micro-USB-Power-for-Nexus-4-5-7-10-U0-/282515294952?epid=1654504794&hash=item41c7394ae8:g:14IAAOSwEzxYO9Zt.
Why no use one of these? Elemental x kernel supports usb org + charging.
Elemental-X for the N7 2013