I messed up when going back to stock rom - T-Mobile HTC One (M8)

so i was trying to install android revolution hd and then i had been thinking that the stock lollipop is better and then i forgot/don't know how to relock the bootloader so i skip the relocking and went straight to RUU_M8_TMOUS_1.57.531.7.exe and when i watched someone on youtube doing it, he said that it will not work if i don't relock it and that explain why it's not doing anything after 30 minutes, s̶o̶ ̶i̶ ̶u̶n̶p̶l̶u̶g̶g̶e̶d̶ ̶t̶h̶e̶ ̶u̶s̶b̶ ̶c̶a̶b̶l̶e̶ ̶a̶n̶d̶ ̶t̶h̶e̶n̶ ̶a̶ ̶b̶o̶o̶t̶l̶o̶a̶d̶e̶r̶ ̶s̶c̶r̶e̶e̶n̶ ̶c̶a̶m̶e̶ ̶u̶p̶ ̶(̶i̶ ̶t̶h̶i̶n̶k̶.̶.̶ ̶i̶t̶'̶s̶ ̶t̶h̶e̶ ̶s̶c̶r̶e̶e̶n̶ ̶w̶i̶t̶h̶ ̶w̶h̶i̶t̶e̶ ̶b̶a̶c̶k̶g̶r̶o̶u̶n̶d̶ ̶a̶n̶d̶ ̶a̶n̶ ̶a̶n̶d̶r̶o̶i̶d̶ ̶s̶k̶a̶t̶e̶b̶o̶a̶r̶d̶i̶n̶g̶ ̶a̶t̶ ̶t̶h̶e̶ ̶b̶o̶t̶t̶o̶m̶)̶ ̶i̶t̶ ̶o̶n̶l̶y̶ ̶s̶h̶o̶w̶i̶n̶g̶ ̶R̶U̶U̶ ̶(̶n̶o̶r̶m̶a̶l̶l̶y̶ ̶y̶o̶u̶ ̶w̶o̶u̶l̶d̶ ̶g̶e̶t̶ ̶s̶o̶m̶e̶t̶h̶i̶n̶g̶ ̶l̶i̶k̶e̶ ̶r̶e̶s̶t̶a̶r̶t̶ ̶t̶o̶ ̶r̶e̶c̶o̶v̶e̶r̶y̶ ̶e̶t̶c̶.̶ ̶b̶u̶t̶ ̶t̶h̶i̶s̶ ̶t̶i̶m̶e̶ ̶i̶t̶s̶ ̶o̶n̶l̶y̶ ̶s̶h̶o̶w̶i̶n̶g̶ ̶R̶U̶U̶ ̶o̶p̶t̶i̶o̶n̶ ̶a̶n̶d̶ ̶w̶h̶e̶n̶ ̶i̶ ̶p̶l̶u̶g̶g̶e̶d̶ ̶t̶h̶e̶ ̶u̶s̶b̶ ̶b̶a̶c̶k̶e̶d̶ ̶i̶n̶,̶ ̶i̶t̶s̶ ̶o̶n̶l̶y̶ ̶s̶h̶o̶w̶i̶n̶g̶ ̶d̶a̶r̶k̶ ̶h̶t̶c̶ ̶l̶o̶g̶o̶)̶,̶ ̶i̶ ̶c̶a̶n̶'̶t̶ ̶r̶e̶s̶t̶a̶r̶t̶ ̶o̶r̶ ̶t̶u̶r̶n̶ ̶o̶f̶f̶ ̶m̶y̶ ̶p̶h̶o̶n̶e̶!̶!̶
i managed to get it restarted by holding power+vol down (i didn't know that lol) and i relocked bootloader with All in One toolkit for M8 but it's still doesn't progress at all when i use the RUU_M8_TMOUS_1.57.531.7.exe. it's already an hour and it doesn't seem to progress at all
and now i completely cannot restart the phone after relocking the bootloader (it just go back to the bootloader), please help!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

FinnTHidayat said:
so i was trying to install android revolution hd and then i had been thinking that the stock lollipop is better and then i forgot/don't know how to relock the bootloader so i skip the relocking and went straight to RUU_M8_TMOUS_1.57.531.7.exe and when i watched someone on youtube doing it, he said that it will not work if i don't relock it and that explain why it's not doing anything after 30 minutes, s̶o̶ ̶i̶ ̶u̶n̶p̶l̶u̶g̶g̶e̶d̶ ̶t̶h̶e̶ ̶u̶s̶b̶ ̶c̶a̶b̶l̶e̶ ̶a̶n̶d̶ ̶t̶h̶e̶n̶ ̶a̶ ̶b̶o̶o̶t̶l̶o̶a̶d̶e̶r̶ ̶s̶c̶r̶e̶e̶n̶ ̶c̶a̶m̶e̶ ̶u̶p̶ ̶(̶i̶ ̶t̶h̶i̶n̶k̶.̶.̶ ̶i̶t̶'̶s̶ ̶t̶h̶e̶ ̶s̶c̶r̶e̶e̶n̶ ̶w̶i̶t̶h̶ ̶w̶h̶i̶t̶e̶ ̶b̶a̶c̶k̶g̶r̶o̶u̶n̶d̶ ̶a̶n̶d̶ ̶a̶n̶ ̶a̶n̶d̶r̶o̶i̶d̶ ̶s̶k̶a̶t̶e̶b̶o̶a̶r̶d̶i̶n̶g̶ ̶a̶t̶ ̶t̶h̶e̶ ̶b̶o̶t̶t̶o̶m̶)̶ ̶i̶t̶ ̶o̶n̶l̶y̶ ̶s̶h̶o̶w̶i̶n̶g̶ ̶R̶U̶U̶ ̶(̶n̶o̶r̶m̶a̶l̶l̶y̶ ̶y̶o̶u̶ ̶w̶o̶u̶l̶d̶ ̶g̶e̶t̶ ̶s̶o̶m̶e̶t̶h̶i̶n̶g̶ ̶l̶i̶k̶e̶ ̶r̶e̶s̶t̶a̶r̶t̶ ̶t̶o̶ ̶r̶e̶c̶o̶v̶e̶r̶y̶ ̶e̶t̶c̶.̶ ̶b̶u̶t̶ ̶t̶h̶i̶s̶ ̶t̶i̶m̶e̶ ̶i̶t̶s̶ ̶o̶n̶l̶y̶ ̶s̶h̶o̶w̶i̶n̶g̶ ̶R̶U̶U̶ ̶o̶p̶t̶i̶o̶n̶ ̶a̶n̶d̶ ̶w̶h̶e̶n̶ ̶i̶ ̶p̶l̶u̶g̶g̶e̶d̶ ̶t̶h̶e̶ ̶u̶s̶b̶ ̶b̶a̶c̶k̶e̶d̶ ̶i̶n̶,̶ ̶i̶t̶s̶ ̶o̶n̶l̶y̶ ̶s̶h̶o̶w̶i̶n̶g̶ ̶d̶a̶r̶k̶ ̶h̶t̶c̶ ̶l̶o̶g̶o̶)̶,̶ ̶i̶ ̶c̶a̶n̶'̶t̶ ̶r̶e̶s̶t̶a̶r̶t̶ ̶o̶r̶ ̶t̶u̶r̶n̶ ̶o̶f̶f̶ ̶m̶y̶ ̶p̶h̶o̶n̶e̶!̶!̶
i managed to get it restarted by holding power+vol down (i didn't know that lol) and i relocked bootloader with All in One toolkit for M8 but it's still doesn't progress at all when i use the RUU_M8_TMOUS_1.57.531.7.exe. it's already an hour and it doesn't seem to progress at all
and now i completely cannot restart the phone after relocking the bootloader (it just go back to the bootloader), please help!!
Click to expand...
Click to collapse
Sorry for the late reply. When you are running the ruu.exe be sure nothing that can talk to the phone is running (HTC sync, eclipse, all-in-one kits, etc). It is best to uninstall any of that to be sure it isn't running. I had HTC sync installed, not running and it caused a plethora of issues on ruu process until I uninstalled it.

Uzephi said:
Sorry for the late reply. When you are running the ruu.exe be sure nothing that can talk to the phone is running (HTC sync, eclipse, all-in-one kits, etc). It is best to uninstall any of that to be sure it isn't running. I had HTC sync installed, not running and it caused a plethora of issues on ruu process until I uninstalled it.
Click to expand...
Click to collapse
i got it fix 2 days ago (big thanks to garmig for helping me out!)
it turns out the RUU i found on some random website is old i think, so that is why it won't flash.
i had tried using a nandroid backup from garmig ( http://forum.xda-developers.com/showthread.php?t=2714456 ), it did get me back to Lollipop, but for some reason my wifi didn't start at all and it crashes everytime for a short time after i reboot. the worst part is, after i tried doing a factory reset it soft bricked.
but then garmig told me to use the RUU again but i need to download it from the official HTC website and it actually work!
the different is when i use that RUU is the software load faster than the broken one and it actually progressed.

Related

[Q] Stock A510e updating main version is older error

I'm currently running 2.35 on my WFS and I want to reflash my ROM because I have the dialler error and can't seem to fix it. The phone is unrooted, uneverything. It's stock. I tried updating with the RUU and get error 140. When I use the SD method I get the 'main version is older' error. Any tips?
There is are many tutorials for downgrading you software. Please check the index thread at the top of the general section
Sent from my HTC Wildfire S A510e using Tapatalk 2
your hboot is 1.080099 ?
gq455402012 said:
your hboot is 1.080099 ?
Click to expand...
Click to collapse
yeah.
I'll check the tutorials and see how it goes
ratboy90 said:
yeah.
I'll check the tutorials and see how it goes
Click to expand...
Click to collapse
becaue the hboot only update by RUU,your hboot1.080099 is very high,so you need found one hboot 1.080099 or even higher 1.090099 and flash it.
this hboot 1.090099 Ruu:http://dl.dbank.com/c0iwj76sdj
gq455402012 said:
becaue the hboot only update by RUU,your hboot1.080099 is very high,so you need found one hboot 1.080099 or even higher 1.090099 and flash it.
this hboot 1.090099 Ruu:http://dl.dbank.com/c0iwj76sdj
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I get that error when I tried doing it. And I just checked my HBOOT version and it's 1.08.0000
Radio Version: 7.54.39.28M
Hopefully you can give me a couple tips.
ok if your hboot is 1.080000,you need to update it to 1.080099,and then unlocked the bootloader.http://forum.xda-developers.com/showthread.php?t=1432199&page=24
gq455402012 said:
ok if your hboot is 1.080000,you need to update it to 1.080099,and then unlocked the bootloader.http://forum.xda-developers.com/showthread.php?t=1432199&page=24
Click to expand...
Click to collapse
ok danke but how do I update the bootloader to 1.08.0099?
just now I give you a link,there is a tools to update and unlocked your phone.
gq455402012 said:
just now I give you a link,there is a tools to update and unlocked your phone.
Click to expand...
Click to collapse
ahh sorry. didn't realise I had to go through HTCDEV to update my bootloader. So my boot loader is now at 1.090099. I can't post this in simonsutiltiy thread(because I don't have 10 posts yet) but I'm getting stuck when it tries booting into recovery mode. The phone just goes to the red triangle and stops doing anything. I pulled that battery and it's still locked.
Do I even have to unlock it? Or can I just reflash the 2.13 rom?
Ok. New update and I could use some help. My bootloader is now unlocked and on 1.090099 on ROM 2.13. But I still can't update to ROM 2.14 or ref lash ROM 2.13. The RUU gives me the error 155. I went through USB fastboot but still the same error. Could anybody else help me?
You simply Unlock the Bootloader, and again reset HBoot using Supervision(I hope so), Then flash out the RUU file. But the only problm s it will be relocked again, then u need to proceed to unlock(if uy need to break rules) means>>>>>

Update via OTA to JB (with HOX unlocked bootloader, rooted & stock ROM)

Today I receive this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So, before do bad thing, I want to know if I can update my HOX via OTA, without re-unlock bootloader or anything else.
Right now,I'm using the stock rom, I only unlock bootloader, flash custom recovery in order to root it.
Thanks
You need to re flash stock recovery
Sent from my HTC One X using xda app-developers app
tomascus said:
You need to re flash stock recovery
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I already do it and nothing. Does anyone know if I update the firmware to 1.36 (my CID is HTC__044) and flash stock boot.img will work? Anyone can provide me just the boot.img file?
And if I flash the stock RUU 2.17.707.3 (which is the one I got) I don't have to update the firmware manually?
All I want is to update to stock JB via OTA.
Thanks.
What is the question?
The fact you got the update means you are good to go. Probably if you boot in bootloader it says re-locked?
The update will update your hboot to 1.36 and firmware to stock 3.14
Where you will lose cwm and root.
If you want root then you need to re-unlock it by cmd and with unlock file you got from the first time.
Sent from my HTC One X
xSilv85 said:
What is the question?
Click to expand...
Click to collapse
The question is why I can't update?. As I say already flash stock recovery, and I have the bootloader unlocked.
But what happens when you try to update?
BenPope said:
But what happens when you try to update?
Click to expand...
Click to collapse
After download the update, the phone reboot and an exclamation red icon appears, then reboot again and you can see that nothing is updated.
Did you got the smaller update too or not? When i flashed stock recovery from RUU i got the small battery update first.
Do you have stock recovery from when you unlocked the phone?
Sent from my HTC One X
xSilv85 said:
Did you got the smaller update too or not? When i flashed stock recovery from RUU i got the small battery update first.
Click to expand...
Click to collapse
Yes.
xSilv85 said:
Do you have stock recovery from when you unlocked the phone?
Click to expand...
Click to collapse
Yes, also I flashed again but nothing. I think that the problem might be that I uninstall some bloatware apps. Anyone know which bloatware apps are updated with the OTA update?
Ah that's the problem, your rom has to be as it came out of the box ! Otherwise it won't work
I should back this rom up and copy it to pc, then run the matching ruu to get back to stock or get the matching nandroid backup in the general section - nandroid backup collection from matt95 !
It's he easiest way in my opinion

[Q] [help me]HTC touch pro2 t mobile error

when i try setup bootloader i have trouble
this is screen error when i push volum - & power
security unlocked
RHOD*** 32M SS-BC
SPL-0.85.0liNex
MicroP(LED) 0X0A
MicroP(KEY) 0X04
TURBO HW/TURBO SW
TP MFG DATA
516,540 806,878
819,196 212,197
217,881 Calibrated
serial
can't reset, hard reset.
when i hard reset my phone just show
restore...
waiting for completed
but never done
please help me!!
What are you trying to do? Flash a ROM? Does it not boot WinMo? Can you not flash stock? Did you try task29?
arrrghhh said:
What are you trying to do? Flash a ROM? Does it not boot WinMo? Can you not flash stock? Did you try task29?
Click to expand...
Click to collapse
i try flash a new rom, my device can't boot to win mobile. I can't flash stock (maybe i don't know anothe way)
can't use task29 because my device can't boot normal
cctoti said:
i try flash a new rom, my device can't boot to win mobile. I can't flash stock (maybe i don't know anothe way)
can't use task29 because my device can't boot normal
Click to expand...
Click to collapse
http://bit.ly/10Yjzc9
U are flashing the wrong rom
I have thesame phone with u,it only allows sprint Roms,so find a sprint rom www.shipped-roms.com or flash this one Verizon shipped-roms.com/download.php?model=RhodiumW&file=RUU_Rhodium_W_WM65_VERIZON_WWE_3.04.605.3_RS_2.23.00WV_NV_VZW_1.94_1111_PRL58005_Ship.exe&send_file=yes
copy and paste in your browser to download, and put ur phone in tri-colour screen and click on your download ...if that doesnt work open the download file change the Nbh file to Rhodimg.nbh extract to your Sd card ,put to ur phone press and hold vol down button and press power button then update from there..........
Himmmm... Interesting advice. Flashing a Sprint or Verizon rom onto a T-mobile phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wizardknight said:
Himmmm... Interesting advice. Flashing a Sprint or Verizon rom onto a T-mobile phone.
Click to expand...
Click to collapse
,Wizard that is not a Tmobile Phone,,,,that was my tought at First.Rhod **** ,no certain model.
Emmaugoh said:
,Wizard that is not a Tmobile Phone,,,,that was my tought at First.Rhod **** ,no certain model.
Click to expand...
Click to collapse
Did you read the title?
[Q] [help me]HTC touch pro2 t mobile error
wizardknight said:
Did you read the title?
[Q] [help me]HTC touch pro2 t mobile error
Click to expand...
Click to collapse
,that was my confusion because it came with a Rhod 100 spec at back and Tmobile casing ...i can say it was Rebranded.....The bootloader was saying a difrent thing...see the bootloader Pic
cctoti said:
when i try setup bootloader i have trouble
this is screen error when i push volum - & power
security unlocked
RHOD*** 32M SS-BC
SPL-0.85.0liNex
MicroP(LED) 0X0A
MicroP(KEY) 0X04
TURBO HW/TURBO SW
TP MFG DATA
516,540 806,878
819,196 212,197
217,881 Calibrated
serial
can't reset, hard reset.
when i hard reset my phone just show
restore...
waiting for completed
but never done
please help me!!
Click to expand...
Click to collapse
,which rom are u trying to flash..
Did you unlock or try to unlock the phone?
many thanks, i fixed

Cant flash TWRP

Hey guys I'm kinda new to Android I've had a chappy phone and now an LG g pad after attempting root about a dozen times I finally managed to get it root now I am trying to get TWRP to backup the tablet and change the boot animation later but every time I tried on my pc it would fail so I installed flashify and tried with that I then I got a boot error saying security issues. The tablet stills boots but I believe the problem is the locked boot loader. Thanks for any help offered.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Look at this thread where some options for flashing TWRP are discussed: http://forum.xda-developers.com/lg-g-pad-83/help/recovery-mode-t2880087
Okay thanks ill check it out
Btw i think my boot loader is locked will this affect it?
Thanks
rooing problems
Joshhi said:
Btw i think my boot loader is locked will this affect it?
Click to expand...
Click to collapse
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
yojimboj said:
Have you installed root checker or another program to confirm that you do, in fact, have root? Start with that.
If you haven't installed a superuser app to handle permissions, I'd do that as well before trying to install TWRP.
I'll admit I had troubles installing TWRP as well, when looking at the forums, make sure you're downloading the version for your EXACT version of android and firmware, and following the instructions for the right version as well. Good luck!
Click to expand...
Click to collapse
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Joshhi said:
I got it flashed yesterday forgot to post that so i tried to change the boot animation and soft bricked it luckily i backed up
Click to expand...
Click to collapse
Will be good if you share how you doit, becouse i have a same problem. Tnx
adler123 said:
Will be good if you share how you doit, becouse i have a same problem. Tnx
Click to expand...
Click to collapse
Do what? Unbricked it or flashed twrp?
Joshhi said:
Do what? Unbricked it or flashed twrp?
Click to expand...
Click to collapse
flashed twrp to v50020d
atomicblue said:
flashed twrp to v50020d
Click to expand...
Click to collapse
I believe it was this
Further in the thread they tell you that you have to change the command from v500-20a to d
http://forum.xda-developers.com/showthread.php?t=2698267
I also think youll have to flash the latest version of twrp from a zip manually

Want to downgrade to 3.38.x to 3.35.617.12 firmware so that I can install Viper?

Hi Everyone,
I have an Australian HTC One M9 with Telstra (carrier). ATM it has Marshmallow installed, and firmware version 3.38.x, but I would like to downgrade the firmware to 'M9_3.35.617.12_FullStock' (International Version). I would like to do this in order to install the Viper ROM. For me Viper ROM is the 'bees knees' (Aussy Slang for F**king GREAT!). I understand that Viper will not run with the firmware that I currently have installed (both through the XDA forums, and from personal experience; developed by attempting to install the ROM). Is the ADB / fastboot method, outlined in the link below, a safe way to proceed?
http://forum.xda-developers.com/one-m9/development/firmware-t3068243
FYI - My phone is S-OFF and Rooted...
Any advice or guidance will be greatly appreciated.
Kind Regards,
Davo
Just tried a couple of firmware..."Patience, you must have patience!"
Ok, so patience is a virtue, but apparently...not so much one of mine! I just tried to flash a couple of the firmwares that I had in mind - unsuccessfully - and below is a screen cap of my results!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mr Davo said:
Ok, so patience is a virtue, but apparently...not so much one of mine! I just tried to flash a couple of the firmwares that I had in mind - unsuccessfully - and below is a screen cap of my results!
Click to expand...
Click to collapse
Did you change your cid and mid to match the firmware you're trying to flash?
Sent from my HTC 10 using XDA Labs
You should change cid to supercid or something that lets you flash the international (European) version aka 3.35.401.12. You can flash whatever you like with this fw without running into issues )
Skickat från min HTC6535LVW via Tapatalk
SuperCID allowed me 'to turn the corner'
Thanks guys, Roobwz in particular; my phone is now SuperCID. I have also successfully flashed 3.35.x firmware ('M9_3.35.401.12_NoWipe_TWRP2871b1.zip'). I made the decision to use the 'htc_fastboot' software rather than 'standard' fastboot. Even though the flashing completed successfully I did have to issue the same command (through htc_fastboot.exe) twice - in between rebooting the phone - please see the screen shot below.
I am now running Viper ROM...but will all the effort be worthwhile?
Glad you figured it out
Skickat från min HTC6535LVW via Tapatalk
Could anyone help me out? I flashed Android Revolution HD on my verizon HTC one M9.
I accidentally did not set my CID or MID to superCID. CID is at VZW__001
Could that be the cause of me not having service anymore? Boots up fine but just no service.
Been lurking reading everything...just can't figure out how to go back as my backup got corrupted somehow. Verizon files seem like the holy grail I've yet to find... Please if anyone knows anything shoot me in the right direction. I never had to do this CID stuff flashing my old HTC Incredible.
Hi coldbloodio,
Phone service was definitely an issue for me, until I performed the SuperCID and then flashed the appropriate firmware. The correct firmware was not possible until I had SuperCID, and without the correct firmware I could not receive any signal using a custom ROM.
Good luck.
Davo

Categories

Resources