Develop Bugs

[Q] Why is the newest Netarchy Kernel making my Stock Root Rom's FPS WORSE?!

Can anyone help me out?
I'm running stock rooted 2.2 (deodexed) and flahsed over the 4.0 zip... and the scrolling is choppier than all hell. I re flashed the stock kernel, and it was back to being fine again. So, I tried again, with wiping the caches first, and still choppier than all get out when I flashed the kernel.
It's definitely the right kernel, but what the hell am I doing wrong here? Any help would be appreciated.

And, I'll even throw in 5-10 dollrs for someone who can give me an answer that works.

This could be because of the new settings he just changed. Try the download that is 4.0.2 and not 4.0.3, or try overclocking your processor to 1.2GHZ with OC widget or SetCPU.

What kind of screen do you have? If you have a Nova panel, you may need to adjust T2 values to get the best performance. Just my 2 cents.

Ok, so I installed 4.0.2, and it seems to be running better, but still some choppiness on the menu up and down scrolling when "all apps" is opened.
I have no idea how to use SetCPU (noob yep... graphics guy... not a tech guy_, so I took a screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wpould you mind just telling me where the sliders should be?

nukedukem said:
What kind of screen do you have? If you have a Nova panel, you may need to adjust T2 values to get the best performance. Just my 2 cents.
Click to expand...
Click to collapse
I have a Nova, but, I have no idea what T2 panels are and how to adjust them. If you could point me to the right app or direction, that'd be awesome. I'll donate to you as well if it helps.

There's an app floating around here called NovaFreq formerly evoswitch. It allows you to change the panel frequency to improve fps. Everyone gets different results. 450ish was usually the best for me. Basically trial and error. Most haven't needed it with recent kernels though. As for setcpu, the higher the max frequency the better fps performance, but overclocking comes with some risks. Im usually underclocked at 576max / 245min. You can also set profiles to run certain speeds when screen off, charging, etc. Helps a lot with battery life. I would move your max down to 998 or 1113 and min to 245. Ondemand is usually a good scaling setting. Hope this helps.
Sent from my FROYO'D EVO using xda app

dglowe343 said:
There's an app floating around here called NovaFreq formerly evoswitch. It allows you to change the panel frequency to improve fps. Everyone gets different results. 450ish was usually the best for me. Basically trial and error. Most haven't needed it with recent kernels though. As for setcpu, the higher the max frequency the better fps performance, but overclocking comes with some risks. Im usually underclocked at 576max / 245min. You can also set profiles to run certain speeds when screen off, charging, etc. Helps a lot with battery life. I would move your max down to 998 or 1113 and min to 245. Ondemand is usually a good scaling setting. Hope this helps.
Sent from my FROYO'D EVO using xda app
Click to expand...
Click to collapse
Wow thanks. I downloaded nova frequency, but just left it at default, and changed the setcpu, bc I was getting random reboots with the overclock. I also set profiles to way lower when the screen is off and the phone is at lower battery percents.
This phone officially runs like it's on crack now. Good stuff.
Guys, PM me ur paypals, and I dont' mind donating a few bucks tomorrow.

Glad to help. Feel free to send my donation to one of the developers on this forum. Without them I wouldn't have known any of that.
Sent from my FROYO'D EVO using xda app

dglowe343 said:
Glad to help. Feel free to send my donation to one of the developers on this forum. Without them I wouldn't have known any of that.
Sent from my FROYO'D EVO using xda app
Click to expand...
Click to collapse
Good ****
Sent from my PC36100 using XDA App

TJDuckett said:
Wow thanks. I downloaded nova frequency, but just left it at default, and changed the setcpu, bc I was getting random reboots with the overclock. I also set profiles to way lower when the screen is off and the phone is at lower battery percents.
This phone officially runs like it's on crack now. Good stuff.
Guys, PM me ur paypals, and I dont' mind donating a few bucks tomorrow.
Click to expand...
Click to collapse
LOL bro. Not only did I tell you to use NovaFreq, but I also told you not to use SetCPU. You were getting reboots b/c it was set too high and you don't want to set it below 245 when screen is off. I don't think SetCPU is so great for *most* people. I could have helped you on GTalk and taken your money...gladly would have

[Helpful Aplication] [Windows] Vsel Calculator

Since alot of people have trouble with Vsel values, i created a Vsel calculator!
This program calculates your Vsel by simple formula !
This formula is used by many other xda (people?)
I hope you find this heplful
OFFTOPIC:
I tried making it with python, but py2exe script got messed up, so i created it with SmallBasic!
Run .exe..it will extract 2 files for you! One is library, and other is the program itself!
EDIT: APPLICATION UPDATED! NOW YOU HAVE TO TYPE HOW MANY VSELS YOU HAVE (3 OR 4) AND TYPE FREQUENCY FOR EACH VSEL AND IT WILL SHOW YOU IDEAL VSEL IN 2mV(+/-) RANGE FOR EACH VSEL!
THANKS TO CRAKERON FOR GREAT IDEA!
ENJOY!
[URL="http://www.mediafire.com/download.php?1jsrisf2rozlp59]Download[/URL]

BUMP!
I MIGHT DELETE THIS THREAD! IT'S POINTLESS!
Sent from my MB525 using xda app-developers app

Dude why are u bumping a thread that's old only 1h?
Wait omg that someone tries.
You even missed the forum, you should've posted this into Themes & Apps.
And you didn't mention that it is for Windows.

mihovil13 said:
Dude why are u bumping a thread that's old only 1h?
Wait omg that someone tries.
You even missed the forum, you should've posted this into Themes & Apps.
And you didn't mention that it is for Windows.
Click to expand...
Click to collapse
Thank you Mitch(bug forum )
Sent from my MB525 using xda app-developers app

installation buttons are in language that i dont understand
take english instead?

cannabis4711 said:
installation buttons are in language that i dont understand
take english instead?
Click to expand...
Click to collapse
??? It should be English! It only extracts those 2 files...you can open exe with winrar or 7zip
Sent from my MB525 using xda app-developers app

It seems like a very good idea. Perhaps could you give a (small) range of Vsel values (-/+ 2mV) as an output? That could take into account the random tolerance of each CPU chip, and would be easy to add to the formula =).
Idea for the future: maybe collect a database of user's CPU settings, and calculate average values for users who have no idea what to enter.
Maybe even make an android app instead of a windows exe? I'm willing to help if you like, i have some spare time ^^. PM me to talk about it =)
01:00 Edit: i am making a little app, only the layout right now, to show you. I'm testing it and i'll PM you the app. It's my 2nd app i've made =D
02:23 Edit2: here's the test app for those who want to see: http://d-h.st/IHr
As you'll see, there is 3 editable boxes where you enter the CPU frequencies you'll like, a button to launch the calcul, and 3 non-editable boxes which will (in the future) post the recommended results

Just tried this upper levels seem good but i have never run that low on 300 will have a go thanks

crakeron said:
It seems like a very good idea. Perhaps could you give a (small) range of Vsel values (-/+ 2mV) as an output? That could take into account the random tolerance of each CPU chip, and would be easy to add to the formula =).
Idea for the future: maybe collect a database of user's CPU settings, and calculate average values for users who have no idea what to enter.
Maybe even make an android app instead of a windows exe? I'm willing to help if you like, i have some spare time ^^. PM me to talk about it =)
01:00 Edit: i am making a little app, only the layout right now, to show you. I'm testing it and i'll PM you the app. It's my 2nd app i've made =D
02:23 Edit2: here's the test app for those who want to see: http://d-h.st/IHr
As you'll see, there is 3 editable boxes where you enter the CPU frequencies you'll like, a button to launch the calcul, and 3 non-editable boxes which will (in the future) post the recommended results
Click to expand...
Click to collapse
Wow..great...checking it now
EDIT: can't open apk
Sent from my MB525 using xda app-developers app

ken bentley said:
Just tried this upper levels seem good but i have never run that low on 300 will have a go thanks
Click to expand...
Click to collapse
So does it work? Also i updated the app, so it can be easier!

ppero196 said:
Wow..great...checking it now
EDIT: can't open apk
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Hmm what version of Android are you running? Froyo or GB?
I've just downloaded the app, it installs correctly and works.
Can you install it or simply can't open lit?
I see it has been downloaded a few times, do other people have a problem too?
12:20 Edit: I suspect it may be because you are running a lower version of android? (lower than 2.3.3). I've changed the minSdkversion of the app. I'm hoping it's that... Otherwise it's those stupid certificates they forced me to create for signing the app --'
http://d-h.st/bhg
Motorola Defy, CM7 @ 1Ghz + CM9 multiboot
[Guide] Install double boot CM7 + CM9
[Guide][Root needed] Unsimlock your Defy
[Mod/Fix][APP]Messaging apps with ENTER button enabled!

umm, im always using this formula to find out the needed vsel: (MHz/20)+2, so my settings are:
17/300, 32/600, 42/800, 1000/52
proved to be stable on all roms for a year now, and its quite battery friendly.
sent from my jellybean defy...

ppero196 said:
So does it work? Also i updated the app, so it can be easier!
Click to expand...
Click to collapse
Yes all is good and very battery friendly,thanks.

zakoo2 said:
umm, im always using this formula to find out the needed vsel: (MHz/20)+2, so my settings are:
17/300, 32/600, 42/800, 1000/52
proved to be stable on all roms for a year now, and its quite battery friendly.
sent from my jellybean defy...
Click to expand...
Click to collapse
ken bentley said:
Yes all is good and very battery friendly,thanks.
Click to expand...
Click to collapse
Guys could you please download the app a few posts above and tell me if it installs/opens correctly please? Anyone ^^
Edit: here's the link http://d-h.st/bhg

thx for the app .. it would be nice to have a web version also (html+javascript for example).

zakoo2 said:
umm, im always using this formula to find out the needed vsel: (MHz/20)+2, so my settings are:
17/300, 32/600, 42/800, 1000/52
proved to be stable on all roms for a year now, and its quite battery friendly.
sent from my jellybean defy...
Click to expand...
Click to collapse
You just told the formula :laugh:

Nagash666BR said:
thx for the app .. it would be nice to have a web version also (html+javascript for example).
Click to expand...
Click to collapse
Are you talking about the windows one or the one i'm asking to be tested?

ppero196 said:
You just told the formula :laugh:
Click to expand...
Click to collapse
true story hehehehheheheh

Can somebody PLEASE tell me if this app works??
http://d-h.st/xHt
It's the to-be android app of ppero's windows app so it is important
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

crakeron said:
Can somebody PLEASE tell me if this app works??
http://d-h.st/xHt
It's the to-be android app of ppero's windows app so it is important
Click to expand...
Click to collapse
not working for me.. on 30 july quarx jb defy+..

Performance governor

Anyone run this?

The only real reason to run performance governor is for benchmark testing. I wouldn't run it any more than that.
Sent from my SPH-D710 using XDA

g_ding84 said:
The only real reason to run performance governor is for benchmark testing. I wouldn't run it any more than that.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Most use it that way, as for me i use to keep the high end freq set and to keep the cpu from cycling and wasting battery
Example.... i like to run at 800, i set to preformance so the phone will not cycle lower then 800 no matter what.

Unknown Zone said:
Most use it that way, as for me i use to keep the high end freq set and to keep the cpu from cycling and wasting battery
Example.... i like to run at 800, i set to preformance so the phone will not cycle lower then 800 no matter what.
Click to expand...
Click to collapse
Battery life difference?

donsh00tmesanta said:
Battery life difference?
Click to expand...
Click to collapse
it might be small but little things add up ........instead of bouncing/cycling up and down from low to high freqs cause it is monitoring the processes/work load even when the phone is not in use. Performance takes the cycling/monitoring of the processes out of the equation and just sets the cpu at the high end.

its weird in set CPU it shows it going to 800mhz instead of staying at 1200mhz
Bug? Glitch?

donsh00tmesanta said:
its weird in set CPU it shows it going to 800mhz instead of staying at 1200mhz
Bug? Glitch?
Click to expand...
Click to collapse
It could be, I use "System Tuner Pro" and when I select "Performance" it stays at 800, since 800 is what I have my high end set at.
Btw I am running EL29 GB with Gunslinger so that is also something to consider.
Edit: I tried different high end freq on performance 1k/1.2k/1.4k and they all were setting and not fluxing to other fregs.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I running rh13

interesting try the free version of system tuner and see if it will stick

Done I'll check in a bit

Same thing

weird, r u running stock? since i only saw 1200 on your high end. btw i am waiting for work that is why I am up.... lol
---------- Post added at 05:55 AM ---------- Previous post was at 05:49 AM ----------
i was going to say try a ics overclock kernel but is there any? maybe the stock kernel does not have a performance governor built in
---------- Post added at 05:58 AM ---------- Previous post was at 05:55 AM ----------
maybe the stock kernel does not have a performance governor built in

Try agats 4.5 or the kuban kernel. They have the over clocking steps built in.
Sent from my SPH-D710 using XDA

I'm stock but tried others

donsh00tmesanta said:
I'm stock but tried others
Click to expand...
Click to collapse
Try wiping the cache and dalvik before you try the kernels that g_ding stated.
agats or kuban should stick on performance if they still dont....I really dont know what to tell you any more to help.....
g_ding84 said:
Try agats 4.5 or the kuban kernel. They have the over clocking steps built in.
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Thanks I knew there were some ICS overclock kernels , I am on GB so I dont look/have ICS stuff.

Unknown Zone said:
Try wiping the cache and dalvik before you try the kernels that g_ding stated.
agats or kuban should stick on performance if they still dont....I really dont know what to tell you any more to help.....
Thanks I knew there were some ICS overclock kernels , I am on GB so I dont look/have ICS stuff.
Click to expand...
Click to collapse
I always wipe twice
They stick to performance but they down clock to 800mhz not stay at 1200

donsh00tmesanta said:
I always wipe twice
They stick to performance but they down clock to 800mhz not stay at 1200
Click to expand...
Click to collapse
I'm on voltage control. And both kernels show proper scaling and on performance I have it stick to 1200mhz. Do you have CPU spy?
Sent from my SPH-D710 using XDA

donsh00tmesanta said:
I always wipe twice
They stick to performance but they down clock to 800mhz not stay at 1200
Click to expand...
Click to collapse
You've been using SetCPU and now apparently System Tuner Pro. It's possible you may have EX Tweaks installed as well, ROM Toolbox Pro, or Tegrak.
The thing you want to remember, is that any and all of these utilities can set CPU performance and governors, so you want to be sure that if you are testing with any of them, that ALL of the others are disabled (at least the functions that would control CPU).
That said, I wouldn't be surprised if it's not a kernel issue. You might have Stock, but it may have been modified or not compatible w/OC/UC. Try one of Agat's kernels with confirmed working overclock/underclock (0.4.4) http://forum.xda-developers.com/showthread.php?t=1767421
I've been using that with SetCPU and it works well.
Oh - one last point -- do you have any Profiles set up in SetCPU? Because if you do, one of them might be overriding your Performance governor setting on the Main SetCPU screen.

Capp5050 said:
You've been using SetCPU and now apparently System Tuner Pro. It's possible you may have EX Tweaks installed as well, ROM Toolbox Pro, or Tegrak.
The thing you want to remember, is that any and all of these utilities can set CPU performance and governors, so you want to be sure that if you are testing with any of them, that ALL of the others are disabled (at least the functions that would control CPU).
That said, I wouldn't be surprised if it's not a kernel issue. You might have Stock, but it may have been modified or not compatible w/OC/UC. Try one of Agat's kernels with confirmed working overclock/underclock (0.4.4) http://forum.xda-developers.com/showthread.php?t=1767421
I've been using that with SetCPU and it works well.
Oh - one last point -- do you have any Profiles set up in SetCPU? Because if you do, one of them might be overriding your Performance governor setting on the Main SetCPU screen.
Click to expand...
Click to collapse
i uninstalled set cpu before using system tuner
i have been using stock, kuban kernel and 4.0 to 4.4 of agats kernels all same issue
zero profiles

[ROM][MIUI-ICS] MIUIANDROID's port for VISION[2.11.23]

MIUIANDROID.COM 'S BUILD 2.11.23
Android 4.0.4
Kernel 3.0.50 - yozgatg
Sense 3.x camera
This is a port(not official miui) that appeared on miui uk site a week ago.
I'm merely posting about it here on XDA. Credits to people who worked on it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
Original Build
The above build had a lot of Chinese bloat and also partly chinese IME. So I cleaned it up a little for you guys to try out.
miuiandroid_vision_2.11.23-cleaned.zip - 255.42 MB​

What are the bugs in this?:0

i suppose there is no landscape sms?

Web page not available. Please provide bugs with rom. Thanks for the post, will try it tomorrow if there is a mirror.
Sent from my HTC Vision using xda app-developers app

btrst said:
i suppose there is no landscape sms?
Click to expand...
Click to collapse
Nope
Palingenesis said:
Web page not available. Please provide bugs with rom. Thanks for the post, will try it tomorrow if there is a mirror.
Sent from my HTC Vision using xda app-developers app
Click to expand...
Click to collapse
I'm not using my dz so I haven't tested it extensively for bugs.. I'm merely posting the rom. Links are working fine...
Sent from my HTC Desire Z using xda premium

rom is just a touch sluggish, especially waking from screen-off.
haven't noticed any bugs.
questions:
- where can i find "long press back to kill apps"
- is there a possibility of bypassing the setting that MIUI has put in place to prevent landscape SMS?
overall a little slower than the JB version of the rom, but everything works well.

Careless_ said:
rom is just a touch sluggish, especially waking from screen-off.
haven't noticed any bugs.
questions:
- where can i find "long press back to kill apps"
- is there a possibility of bypassing the setting that MIUI has put in place to prevent landscape SMS?
overall a little slower than the JB version of the rom, but everything works well.
Click to expand...
Click to collapse
wait, is there a jb version out?

Careless_ said:
- where can i find "long press back to kill apps"
Click to expand...
Click to collapse
complete settings >buttons & keys > back key setting

2.11.23 build has come up after a week's absence.

for miuiandroid.com rom we can use Control Panel Suite from here.
It give landscape mode for message app, 4 way reboot and other.

i tried installing the control panel zip and it boot locked.
going to back up and try again now, but it doesn't seem like its compatible with this stripped version.
---------- Post added at 01:06 AM ---------- Previous post was at 12:36 AM ----------
got it working.
landscape mode working well now too
going to try the rest of the features out.
thanks vlad.
edit:
what is surface flinger?

Dude. Any tips for getting the panel to work. Gonna DL all the packages and flash away. Just wandered if I need to do anything in particular. Coming from a flinny JB test build so I'm guessing a full wipe and GApps is needed?
Sent from my HTC Vision using xda premium

i'll admit it's not that straightforward. so i'll help out.
install the rom only.
boot up.
set up your phone how you want, maybe run it for a couple of minutes, load apps you want to start on boot like setcpu or whatever.
use 4ext control to select the control panel zip to be installed, and make a backup of your steady state when you get everything set up.
when the control panel is done installing, it's not a setting in the phone menu, it's an app on your dashboard that you need to click on.
i think the trick is letting the rom boot and optimize the apps before installing. i got a boot loop when installing both at the same time.
best of luck.
---------- Post added at 09:51 PM ---------- Previous post was at 09:48 PM ----------
sooooooo.... is we gittin' some JB 4.1.2 or 4.2 luuuvin' soon, strawzies? :fingers-crossed:

Thanks mate. Worked a treat. Now rocking 2.11.23 with landscape sms
As a first impression for anyone who cares, I came from flinnys test 129. Straight away I notice better battery. Its more responsive even with the cpu set lower on min. Not seen any crazy text stuff which I got from time to time previously.
Overall its the same smooth miui that I remember.
Thanks guys
Sent from my HTC Desire Z using xda premium

MarkyG82 said:
Thanks mate. Worked a treat. Now rocking 2.11.23 with landscape sms
As a first impression for anyone who cares, I came from flinnys test 129. Straight away I notice better battery. Its more responsive even with the cpu set lower on min. Not seen any crazy text stuff which I got from time to time previously.
Overall its the same smooth miui that I remember.
Thanks guys
Sent from my HTC Desire Z using xda premium
Click to expand...
Click to collapse
indeed, i'd have to say this is the best rom i've run in a very long time.

which device should we select to download control panel?
theres no vision on list so im guessing maybe ace?
edit: they just uploaded vision file so nevermind.

lol vision file has been there since i downloaded it dood. ya just missed it the first time.

MIUI 4 is epic.
But with 130mb free ram you can use android..
With GB you get 230 ..

nagash91 said:
MIUI 4 is epic.
But with 130mb free ram you can use android..
With GB you get 230 ..
Click to expand...
Click to collapse
its quite usable on my end. im thinking about making this my dd.
you wont need 230mb free ram if you wont be doing much multitasking anyway.

Its usable but very slow. I hope miui based on jb improve the situation.

[APP][ROOT][Battery Saver]One Power Guard

LATEST VERSION- 2.6
Ok straight foward. U hav very bad phone battery drain? Over the night u hav a bad battery drain on ur S2? Android OS drain? In betterbatterystats its showing awake>Screen ON?
Now forget them all. The one stop solution is One Power guard.. Caution: U must be rooted to use this app!! Thanks to onexuan for his miracle app which stops the battery drain by stopping the apps while phone is in deep sleep mode. I personally tried this on S2 with ROOTBOX JB ROM.. Got more than 3hrs On screen time with 2G ON(will attach screenshot later)...
Features:
1. Extends stand-by time and battery life; optimizes charging parameters
2. Optimizes system kernel and CPU usage to improve device performance
3. Six (6) customized power-saving modes to suit different scenarios
4. Proactively guards from power-killer apps and safely shuts down useless power-consuming programs
5. Fast ON/OFF settings for 100% system customization
6. Intelligently switches to/from WiFi/Cell data to preserve battery life
7. Professional Tips on power optimization
Why do you need One Power Guard? and Test One Power Guard for yourself.
1. Fully charge your battery before you go to bed. In the morning, check your battery status and note how much is remaining.
2. After installing One Power Guard, fully charge the battery before you go to bed. In the morning, check your battery status, you will be impressed by the power savings!
3. To compare the optimization results, you need to restart the phone so that you have a clean environment.
Play store link---> Click Me!!
If u dont want play store link u can download from the main post
Screenshots-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JUST TRY THIS APP ONCE...

I have some problems.
1. I am on stock ROM and Kernel..
In all mode, can not set CPU frequency more then 1.2GHz and less then 200MHz. Is this due to my phone kernel limitation?
2. I have also installed some power saving apps like Lux brightness, Greenify....
Is this app will kill all these app?
Please reply me. I am noob to app these
Sent from my GT-I9100 using Tapatalk 2

MBariya said:
I have some problems.
1. I am on stock ROM and Kernel..
View attachment 1763346
In all mode, can not set CPU frequency more then 1.2GHz and less then 200MHz. Is this due to my phone kernel limitation?
2. I have also installed some power saving apps like Lux brightness, Greenify....
Is this app will kill all these app?
Please reply me. I am noob to app these
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
1. Dude stock ROM kernel means are u rooted? I dont think so.. If so u need a OC kernel..
2. If apps r trying to wakeup i wont allow them to stay long.. I think LUX has no issue. Greenify i hav to check and let u know.

Prashanthme said:
1. Dude stock ROM kernel means are u rooted? I dont think so.. If so u need a OC kernel..
2. If apps r trying to wakeup i wont allow them to stay long.. I think LUX has no issue. Greenify i hav to check and let u know.
Click to expand...
Click to collapse
Yes i have rooted my phone with universal root method.
http://forum.xda-developers.com/showthread.php?t=1746794
So i am on stock kernel. My question is, can i change frequency of my kernel or i have use other?.
Sent from my GT-I9100 using Tapatalk 2

MBariya said:
Yes i have rooted my phone with universal root method.
http://forum.xda-developers.com/showthread.php?t=1746794
So i am on stock kernel. My question is, can i change frequency of my kernel or i have use other?.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Ya change to ICS OC kernel ur stock kernel doesnt support OC.... Try Dorimanx kernel its OCd upto 1600 Mhz.. If u more concerned abt battery dont OC... Thx to the app i m getting 4+ hrs of screen on time...

Downloaded this for my nexus 4 and the idea of this app is pretty cool just open app and tap on 1 of the battery or power modes BUT i have a problem with this app which im not sure is normal or can be fixed, when i choose 1 of the power options e.g performance and i then want to switch to powersave or standby it does not change, i can tap on it and it will say powersave on but u can see on cpu its still on performance so basically have to reboot everytime i want to switch which obvioisly is very annoying

Question regarding Defence Feature
I am new to this app but eager to learn more about it and to increase it's effectiveness..
I am puzzled a bit about the Defence feature...
Does this feature identify apps that are using excess power so that one can disable them?
Any other uses for this feature?
thanks