Can I use this charger on my phone? As oppose to the orig charger I have?
cell2011 said:
Can I use this charger on my phone? As oppose to the orig charger I have? Is the orig charger just as fast charging time?
Click to expand...
Click to collapse
Is the orig charger just as fast charging time?
You can use standard (non quick charge enabled) phones on a quick charge adapter, there should be no issue. Quick chargers will lower the voltage down to what the phone can handle so presumable it should charge at the same rate as the stock charger.
Related
I have a couple of generic chargers I've been using with my note 2 for a couple of years. I realize these will charge slower than the samsung fast charge charger but is there any reason we can't use them or will they impact battery life (I would think they would increase battery life); i supect the answer is that they are fine but maybe battery technology has changed and there is some 'smarts' between charger and battery that would be damaged by these ?
No issue using your old charger except as you mentioned it won't be fast charging. I do not believe that the fast charging will hurt the battery. The fast charge only works for the first portion of the charge then the rate of charge slows to a trickle charge.
U can use any charger but i recommend to use any charger with 2amp output as it charges quick 40% in 30 mins insteas of 50%in 30 mins with original.
Original charger has two modes 9v and 5v it charges with 9v untill 50% and switches to 5v after that.
I think the unit i use is a sanyo 800ma 5 volt. I don't mind the slwo charge as long as it can't harm the battery. This is only used during travel and office; @ home I use the charger that came with the device.
You can definitely use another charger. Like said before it wont charge as fast. The adapter that comes with the phone will charge your phone at 9v instead of the normal 5v. If you use a different usb cable with the charger it will still charge at 9v. If you change the adapter, it will charge at the normal 5v whether you use the another usb cable or the one that came with the phone. The usb cable is just wires. The wall adapter is what determines how fast it will charge...
So the G4 comes supplied with a 1.8A output charger, and I am wondering whether it is okay to use another charger I have, which has a 2.1A output? As in will it damage the battery over time?
I have heard the G4 supports quick charging so I'm guessing in that case it would be okay.
Thanks in advance.
It's fine. The phone will charge at whatever current it deems safe, even if you had a 100A supply available.
RedOCtobyr said:
It's fine. The phone will charge at whatever current it deems safe, even if you had a 100A supply available.
Click to expand...
Click to collapse
Would it charge faster?
Maybe a little.
I get about 1600mA with the stock charger. And about 1900mA with my Quick Charge 2.0 charger, which can provide the equivalent of >2.1A. I don't have any good-quality normal 2.1A chargers available to try.
So the largest benefit you could see would be about 20%, if the phone charged as quickly as it does from a QC 2.0 charger. I doubt it would charge that quickly, personally.
http://forum.xda-developers.com/showpost.php?p=62308705&postcount=104
I'm thinking to buy a new charger for my phone since it was broken. Do I need to buy the default (1A) or should I go to 1.5A?
isssaputra said:
I'm thinking to buy a new charger for my phone since it was broken. Do I need to buy the default (1A) or should I go to 1.5A?
Click to expand...
Click to collapse
AFAIK, the phone will only take a maximum of 1A. It doesn't help or hurt to go more though. So, if the 1.5A charger is cheaper, I'd go that route since you could then use it on other devices that require more juice ("future proofing").
isssaputra said:
I'm thinking to buy a new charger for my phone since it was broken. Do I need to buy the default (1A) or should I go to 1.5A?
Click to expand...
Click to collapse
Go with any Quick Charge charger. I personally have the Quick Charge 3.0 Aukey 2 port because I also have an HTC 10. I can tell you that it will charge the phone faster than the stock charger. The M7 has Quick Charge 1.0 technology but the stock charger wasn't a quick charge charger. With with a quick charge charger you can get a fill charge in a little over a hour 40 mins.
The HTC M7 is not on Qualcomm quick charger 1.0 compatibility list.
https://www.qualcomm.com/news/onq/2...-charge-10-less-time-charging-more-time-doing
John.
BlitzWolf™ 4.8A 24W Dual USB Travel Wall US EU Charger With Power3S Tech For iPhone iPad Samsung.
Available in black or white.
USA http://www.banggood.com/BlitzWolf-2...th-Power3S-Tech-For-iPhone-iPad-p-988945.html
EU http://www.banggood.com/BlitzWolf-2...ith-Power3S-TechFor-iPhone-iPad-p-987689.html
Review http://lygte-info.dk/review/USBpower BlitzWolf 24W Dual wall charger UK.html
Or
[Qualcomm Certified] BlitzWolf® BW-S6 QC3.0+2.4A 30W Dual USB Fast Charger US Adapter (Qualcomm Quick Charge 3.0)
EU http://www.banggood.com/Qualcomm-Ce...r-EU-Adapter-With-Power3S-Tech-p-1047935.html
USA http://www.banggood.com/Qualcomm-Ce...r-US-Adapter-With-Power3S-Tech-p-1047936.html
Review http://lygte-info.dk/review/USBpower BlitzWolf 30W QC3.0 Dual-Port USB Adapter BW-S6 UK.html
John.
You might as well stick to original charge because fast chargers can mess up the battery.
b$ mate. Charging controller is in the phone, not in the charger. You can use even 100A charger, but phone will limit charging current go to the batter as it needs.
Mike
Hi guys, the Zenfone 3 deluxe supports qualcom quick charge 3.0 however it seems to be locked to the oem charger. Any other licenced qc 3.0 charger does not quick charge the phone. How hard would it be to get around this? Mainly for qc 3.0 powerbanks.
Huffy1 said:
Hi guys, the Zenfone 3 deluxe supports qualcom quick charge 3.0 however it seems to be locked to the oem charger. Any other licenced qc 3.0 charger does not quick charge the phone. How hard would it be to get around this? Mainly for qc 3.0 powerbanks.
Click to expand...
Click to collapse
This is not true. I am using this one - https://www.amazon.de/gp/product/B01EH11AS8/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
and the quick charge 3.0 works fine. I am still using the original type-c cable that came with the phone though.
Note: Make sure that you have plugged in the USB end of the charger correctly, push it all the way in. If it's only pushed in partially, then you may not be getting the full power for Quick Charge. You can verify this by using a tool like AIDA64 from the playstore and checking the "Charge Rate" under battery.
This is where I was told it's not supported.
wap.ithome.com/html/262150.htm
Does it say Fast charging on the lock screen?
Huffy1 said:
This is where I was told it's not supported.
wap.ithome.com/html/262150.htm
Does it say Fast charging on the lock screen?
Click to expand...
Click to collapse
Update: Sorry guys, I realized that the OEM charger is indeed much faster at charging. Read posts below.
postimg.org/image/6wis1rux1/ - using licenced qc3.0 charger
postimg.org/image/ndr13s0pv/ - using oem charger.
Further test screen off
15min charge with licenced qc3.0 gives 13%
15min charge with oem charger gives 27%
Same test with screen on (playing video)
15mins with either charger yields about 15%, no noticible difference. Seems like the oem charger throttles when screen is on.
All tests are run when the battery is below 20%.
Same oem cable used for all tests.
Using the oem charger to fully charge my phone does it nearly twice as fast as the qc3.0 charger.
Don't know how your able to achieve the same speed regardless of charger
Hi guys, I've been experiencing the same problem with original charger, that's very big and it's seems that didn't have quick charge. I've a samsung charger and with samsung charger it wroks fine. I'll try to well plug thw original , but, it's thinner samssung's one.
Huffy1 said:
postimg.org/image/6wis1rux1/ - using licenced qc3.0 charger
postimg.org/image/ndr13s0pv/ - using oem charger.
Further test screen off
15min charge with licenced qc3.0 gives 13%
15min charge with oem charger gives 27%
Same test with screen on (playing video)
15mins with either charger yields about 15%, no noticible difference. Seems like the oem charger throttles when screen is on.
All tests are run when the battery is below 20%.
Same oem cable used for all tests.
Using the oem charger to fully charge my phone does it nearly twice as fast as the qc3.0 charger.
Don't know how your able to achieve the same speed regardless of charger
Click to expand...
Click to collapse
Interesting ... I stand corrected now regarding the "Fast Charging" on the lock screen.
I never used the original charger because I bought mine directly from Taiwan which has an US plug which I cannot use here in Germany directly without an extension.
I tried the OEM charger now with an adapter and yes you are right, the Charge Rate with the OEM charger is 2 times faster than with other chargrers.
OEM charger - 2900ma charge rate
Other charger - 1300ma charge rate
---------- Post added at 11:29 AM ---------- Previous post was at 11:02 AM ----------
Actually now I'm confused. When I plugged in the OEM charger, it said "Fast Charging" for a short while and then it says "Charging". The Charge rate also came down from 3000ma to 1300ma and down to 800ma when the battery is at 90%.
I will do some proper tests with the different chargers and post back.
Confirmed: OEM charger is much faster than other QC 3.0 chargers
When the phone reaches 70-80%, the charging rate will slow down and just trickle charge. This is normal as it can be dangerous to keep charging at Fast speeds when the battery is close to full capacity. So if your phone has 80% and you put it on charge, it will not Fast charge regardless of the charger you use.
Huffy1 said:
When the phone reaches 70-80%, the charging rate will slow down and just trickle charge. This is normal as it can be dangerous to keep charging at Fast speeds when the battery is close to full capacity. So if your phone has 80% and you put it on charge, it will not Fast charge regardless of the charger you use.
Click to expand...
Click to collapse
Thanks for the information
I can also confirm fast charging doesn't work with my QC 2.0 charger. Interesting thing to note is it outputs 5V - 2A and 9V -2A. My guess is this charger from Asus that fast charges the Zenfone 2 would work on our phones because it has the same outputs if you read the description. It's worth a shot and you could always return it to Amazon if it doesn't work.
http://store.asus.com/us/item/20150...nFone+2+&+T100CHI+18W+Power+Adapter+and+Cable
Also sold at Amazon
https://www.amazon.com/ASUS-Charger-Zenfone2-T100CHI-Retail-packaging/dp/B00XR0FBYK
It would be nice to remove the red light when the phone is charging. Maybe it's something that can only be removed after rooting?
pacattack81 said:
I can also confirm fast charging doesn't work with my QC 2.0 charger. Interesting thing to note is it outputs 5V - 2A and 9V -2A. My guess is this charger from Asus that fast charges the Zenfone 2 would work on our phones because it has the same outputs if you read the description. It's worth a shot and you could always return it to Amazon if it doesn't work.
http://store.asus.com/us/item/20150...nFone+2+&+T100CHI+18W+Power+Adapter+and+Cable
Also sold at Amazon
https://www.amazon.com/ASUS-Charger-Zenfone2-T100CHI-Retail-packaging/dp/B00XR0FBYK
It would be nice to remove the red light when the phone is charging. Maybe it's something that can only be removed after rooting?
Click to expand...
Click to collapse
Unfortunately, even though the charger referenced above has the same outputs it doesn't fast charge. Seems you can only fast charge with the included charger. At least we can use our own charging cable. If anyone gets another charger to fast charge the device let us know. It doesn't appear Asus sells the included charger on it's webpage yet.
Not allowing the standard quickcharge charger to work forces people to once again purchase / replace current QC chargers.
One tick to the CONs side of the evaluation.
ewingr said:
Not allowing the standard quickcharge charger to work forces people to once again purchase / replace current QC chargers.
One tick to the CONs side of the evaluation.
Click to expand...
Click to collapse
At this moment, I don't really think it's a CON side...
The quality of all those QC2.x/3.x charger are not even today (may get better in future, however I really doubt those cheap, knock-off charger from China). Some are good, some are outright bad. QC is quite sensitive with the voltage/current delivered by the charger (it's by design of QC, I believe) and not optimum voltage/current will shorten the battery life at best, create danger at worst scenario.
LiPo battery is really not designed to be charged in high speed. The associated temperature issues needs to be check very carefully and charge current needs to be controlled strictly to avoid dangerous thermal runaway. It cannot only be done by phone itself and need co-work from adaptor (switching voltage, for instance.) Thus an adaptor which have good communication with phone is a safety requirement as far as QC is concerned.
Same with me. I bought a wall charger aukey PA-16 and a car charger Aukey CC-T8. Using the ampere APP, The original zenfone charger gets 2800 mAh. And the aukey chargers up to 1300 mAh.
K6 charger also does not enable Quick Charge function on 570KL
Input type: 100-240V 50-60Hz 0.5A - Quick charge 3.0 output: 3.6V-6.5V-3A/6.5V-9V-2A/9V-12V-1.5A - Power: 18W
I am wondering if someone achieved any solution to remove OEM charger lock to use fast charge with third party Qualcomm Certified Chargers/Power Banks?
Sorry to resume this thread but i lost my oem charger and id like to get one that works with the zenfone 3 deluxe and quickcharge. Can anyone post a link where i can buy it or maybe the model number of the charger? The EU version would be nice.
Thanks
Any solution to the original question?
pacattack81 said:
I can also confirm fast charging doesn't work with my QC 2.0 charger. Interesting thing to note is it outputs 5V - 2A and 9V -2A. My guess is this charger from Asus that fast charges the Zenfone 2 would work on our phones because it has the same outputs if you read the description. It's worth a shot and you could always return it to Amazon if it doesn't work.
http://store.asus.com/us/item/20150...nFone+2+&+T100CHI+18W+Power+Adapter+and+Cable
Also sold at Amazon
https://www.amazon.com/ASUS-Charger-Zenfone2-T100CHI-Retail-packaging/dp/B00XR0FBYK
It would be nice to remove the red light when the phone is charging. Maybe it's something that can only be removed after rooting?
Click to expand...
Click to collapse
ASUS locked the fast charge function to the OEM QC 2.0 charger that comes with the phone (it will NOT work even with other ASUS QC 2.0 - or 3.0 - chargers, only with the specific type/"model" that came with the phone). Therefore we don't get QC3.0 - as advertised - at all. The QC3.0 compatibility with 3rd party chargers, powerbanks and car chargers was disabled with one of the updates, I think it was the Android 7.0 Update (that replaced Android 6.0) that removed QC3 compatibility. So... any ideas how to re-enable the QC 3.0 functionality?
Quick charge was disabled for other chargers from day one. I'm still on marshmallow (Android 6.0) and only the charger that came with the phone works with quick charge.
Hi!
I have change my pixel 2 XL to buy OP 9 Pro. I charged P2XL with 5V/1A at night, so don't how much time stay charging.
Now I have read and Wrap charge uses 10V (OP9 Pro has a dual battery) and 6,6A but I wanted to charge it slowly. Do yo know it is correct to use an 5V/3A charger? (For exemple the P2XL original charger). I know that 5V/1A is too low for this OP.
Thanks!
LluisAzm said:
Hi!
I have change my pixel 2 XL to buy OP 9 Pro. I charged P2XL with 5V/1A at night, so don't how much time stay charging.
Now I have read and Wrap charge uses 10V (OP9 Pro has a dual battery) and 6,6A but I wanted to charge it slowly. Do yo know it is correct to use an 5V/3A charger? (For exemple the P2XL original charger). I know that 5V/1A is too low for this OP.
Thanks!
Click to expand...
Click to collapse
You can use even slower charging, like the USB power from your laptop, starting with USB 3, which is 5V and 900mA (4,5W). USB 2 with 2,5W needs way longer to charge your 4,5 Ah battery.
A charger with 5V and 3A is fine, the max current could be cut down a bit by the phone, I didn't test it with a charger. Therefore you can use your P2XL charger.
Frankly, charging with 4,5W (USB 3) is fast enough, if you have your phone right next to your laptop all day. It chargers while I am using it and when it reaches 80%, tasker drops a notification and popup. Charging done.
I just got mine. Charged with 65w wall charger 0 to 100% in a little more than 25 minutes, (i did not noted the exact time). With the phone off.
Thank you for your replies!
I am many times with computer, really it's a good option to charge it at 0,9A. I have a some Chromecast's chargers at 5V/1A too.
If 5V/0,9-1A is correct, I think that only will use chargers of P2XL and OP9Pro when I need to charge in few minutes...
Thanks again!
LluisAzm said:
Thank you for your replies!
I am many times with computer, really it's a good option to charge it at 0,9A. I have a some Chromecast's chargers at 5V/1A too.
If 5V/0,9-1A is correct, I think that only will use chargers of P2XL and OP9Pro when I need to charge in few minutes...
Thanks again!
Click to expand...
Click to collapse
You can also buy a "chargie" which pairs over Bluetooth and let's you limit the charge current and voltage to whatever you want. I use it to protect my battery lifespan
dkcats3 said:
You can also buy a "chargie" which pairs over Bluetooth and let's you limit the charge current and voltage to whatever you want. I use it to protect my battery lifespan
Click to expand...
Click to collapse
Oh thanks! I didn't know it and is perfect to save battery.