Related
Hi guys!
I had rooted u9200 on ICS firmware version B100, but I didn't manage to unlock bootloader to install CWM. So I decided to flash update 4.1.1 B508 offical beta firmware. I had to change build.prop to match the B508 version and I succesfully flashed 4.1.1 update. The problem now is that I can't root it. No way, I tried everything, not a chance. Also I can't downgrade because I have to change build.prop again to match the version I'm trying to downgrade to, but since I don't have root access I can't change build.prop. So now I'm stuck on unrooted beta version of 4.1.1.
Plese if anyone has any ideas and suggestions do not hesitate to write.
Out with the old, in with the new
So, I finally menaged to root 4.1.1 and to flash cwm. So now I flashed CM10 4.2.1 and it's working fine, but... When I go to settings/storage I can see my internal memory as "Internal storage" 2.14GB and I can see my sd card as "sd card" 29.78GB, but from any file menager I tried to use the situation is different, I see my internal storage as "sd card" and my real sd card is nowhere to be found, I can't access it from anywhere. The card is working fine, I tried it on my pc, and I used it to install this CM10 I'm on now.
Anyone with similar issues?
Please help me.
Tux2609 said:
So, I finally menaged to root 4.1.1 and to flash cwm. So now I flashed CM10 4.2.1 and it's working fine, but... When I go to settings/storage I can see my internal memory as "Internal storage" 2.14GB and I can see my sd card as "sd card" 29.78GB, but from any file menager I tried to use the situation is different, I see my internal storage as "sd card" and my real sd card is nowhere to be found, I can't access it from anywhere. The card is working fine, I tried it on my pc, and I used it to install this CM10 I'm on now.
Anyone with similar issues?
Click to expand...
Click to collapse
Hi,
I have the exact same problem and have been scouring the internet for answer.
I bought my P1 in Hongkong, so had a Hongkong stock B104 firmware, i used unlockroots software to unlock it successfully, but like you did not put any recovery on it, so have no way to flash a new rom or any recovery. i also like you edited the build.prop file using root explorer and flashed B508 (Jellybean).
1) Can you please tell me in a step by step guide how u managed to get CM10 & recovery on your phone & where u got the software etc.
2) I have backed-up my phone using Hisuite and Hicloud using cload software to the Internet & SD cards, will this be ok or will your procedure erase my SD card and will i be able to restore.
3) How would you rate CM10 compared to B508 firmware, is everything working as it should.
Your help would be much appreciated, and i would be extremely grateful.
Regards
Nil
nilbymouth said:
Hi,
I have the exact same problem and have been scouring the internet for answer.
I bought my P1 in Hongkong, so had a Hongkong stock B104 firmware, i used unlockroots software to unlock it successfully, but like you did not put any recovery on it, so have no way to flash a new rom or any recovery. i also like you edited the build.prop file using root explorer and flashed B508 (Jellybean).
1) Can you please tell me in a step by step guide how u managed to get CM10 & recovery on your phone & where u got the software etc.
2) I have backed-up my phone using Hisuite and Hicloud using cload software to the Internet & SD cards, will this be ok or will your procedure erase my SD card and will i be able to restore.
3) How would you rate CM10 compared to B508 firmware, is everything working as it should.
Your help would be much appreciated, and i would be extremely grateful.
Regards
Nil
Click to expand...
Click to collapse
Hi!
I used this guide to root, unlock bootloader and install cwm (I know the b508 is 4.1.1 but it worked for me): http://betanews.com/2012/11/13/how-to-root-android-4-2/
Download recovery image from here: http://www.mediafire.com/?pdaj3bohegu0vox
ROM is here (if you haven't found it already): http://forum.xda-developers.com/showthread.php?t=1930207
I don't know if you will be able to restore, but I don't see why not. I used titanium backup, you must be careful not to restore any system apps or settings. Also make a full backup from recovery before restoring because it's possible that it gets stuck on boot. Also it will not erase your SD card but it might be wise to use a clear one just in case.
I've been using this ROM for some time now and it works great. The only thing that bothers me is that video recording doesn't work, but I guess this will be solved in new versions.
Tux2609 said:
Hi!
I used this guide to root, unlock bootloader and install cwm (I know the b508 is 4.1.1 but it worked for me): http://betanews.com/2012/11/13/how-to-root-android-4-2/
Download recovery image from here: http://www.mediafire.com/?pdaj3bohegu0vox
ROM is here (if you haven't found it already): http://forum.xda-developers.com/showthread.php?t=1930207
I don't know if you will be able to restore, but I don't see why not. I used titanium backup, you must be careful not to restore any system apps or settings. Also make a full backup from recovery before restoring because it's possible that it gets stuck on boot. Also it will not erase your SD card but it might be wise to use a clear one just in case.
I've been using this ROM for some time now and it works great. The only thing that bothers me is that video recording doesn't work, but I guess this will be solved in new versions.
Click to expand...
Click to collapse
Hi,
Thank you ever so much, i will give this a go and let you know how it goes, by the way the link for the recovery image is not working, do you have any other links or know where or what i should be looking for.
Rgds
nilbymouth said:
Hi,
Thank you ever so much, i will give this a go and let you know how it goes, by the way the link for the recovery image is not working, do you have any other links or know where or what i should be looking for.
Rgds
Click to expand...
Click to collapse
Yeah, most links work for a short period of time.
Here, this is the one I use
Tux2609 said:
Yeah, most links work for a short period of time.
Here, this is the one I use
Click to expand...
Click to collapse
Thanks for that, the tutorial mentions putting the phone in to fastboot, i have tried holding vol up & down buttons with power, phone just reboots.
I saw others saying to first take the battery out, how the heck do you take the battery out of the Ascend P1 (U9200)?
Could you please tell me how you proceeded at this step, also do you have google play working on it?
Would i not be able to flash a recovery image on the phone using AndroidControl app, it has a tab for flashing recovery but did not want to try it without asking if you tried this method?
Thanks in advance.
nilbymouth said:
Thanks for that, the tutorial mentions putting the phone in to fastboot, i have tried holding vol up & down buttons with power, phone just reboots.
I saw others saying to first take the battery out, how the heck do you take the battery out of the Ascend P1 (U9200)?
Could you please tell me how you proceeded at this step, also do you have google play working on it?
Would i not be able to flash a recovery image on the phone using AndroidControl app, it has a tab for flashing recovery but did not want to try it without asking if you tried this method?
Thanks in advance.
Click to expand...
Click to collapse
Turn off the phone, hold the volume down button and then plug in the usb cable. This should turn the phone on and put it into fastboot.
After that just follow the instructions provided in the link above. I got a few error messages in the process but I proceeded with all commands and it worked.
Tux2609 said:
Turn off the phone, hold the volume down button and then plug in the usb cable. This should turn the phone on and put it into fastboot.
After that just follow the instructions provided in the link above. I got a few error messages in the process but I proceeded with all commands and it worked.
Click to expand...
Click to collapse
Have you tried AndroidControl as it seems to have all the files thats mentioned in the tutorial and makes flashing recovery supposedly easy, i wonder if it will work on an unrooted phone.
nilbymouth said:
Have you tried AndroidControl as it seems to have all the files thats mentioned in the tutorial and makes flashing recovery supposedly easy, i wonder if it will work on an unrooted phone.
Click to expand...
Click to collapse
I have and it didn't work for me. You can try it for yourself if you want to. But this tutorial is easy enough for everyone I think, you just type in the commands it says and that's it.
Tux2609 said:
I have and it didn't work for me. You can try it for yourself if you want to. But this tutorial is easy enough for everyone I think, you just type in the commands it says and that's it.
Click to expand...
Click to collapse
UPDATE: I was able to flash the recovery using AndroidControl, i installed the driver first in fastboot mode and then restarted the phone, while still connected to the pc i ran AndroidControl then chose the flashing tab and flashed the recovery using cwm touch recovery, and then flashed with supersu file you gave me, to give me root acess, all went fine and my phone is now rooted with cwm touch recovery.
I still have not upgraded to CM10 as i wanted to see how B508 will be with Google play now working. As i did not have a recovery mode which could flash zip from sdcard, i was unable to flash gapps zip, i have now flashed gapps and all is working fine.
What was the reason you changed to CM10 rom, was the beta version of B508 not very good for you, i would really like to know what the difference is before flashing another rom?
Thank you very much for your help & assistance and your prompt replies.
XDA develepors forum rocks.
nilbymouth said:
UPDATE: I was able to flash the recovery using AndroidControl, i installed the driver first in fastboot mode and then restarted the phone, while still connected to the pc i ran AndroidControl then chose the flashing tab and flashed the recovery using cwm touch recovery, and then flashed with supersu file you gave me, to give me root acess, all went fine and my phone is now rooted with cwm touch recovery.
I still have not upgraded to CM10 as i wanted to see how B508 will be with Google play now working. As i did not have a recovery mode which could flash zip from sdcard, i was unable to flash gapps zip, i have now flashed gapps and all is working fine.
What was the reason you changed to CM10 rom, was the beta version of B508 not very good for you, i would really like to know what the difference is before flashing another rom?
Thank you very much for your help & assistance and your prompt replies.
XDA develepors forum rocks.
Click to expand...
Click to collapse
Hi!
I'm glad to hear you made it. Why I use CM? Well, there really is no good answer to that. I was using CM on all my other phones too, I'm used to it, I like its speed and stability, I like look and feel and also I like it's additional options. That being said, there is one problem not with CM but with Jelly bean in general. Android 4.2 has a different directory structure, due to its new multiuser features. The problem with that is that you can't install apps on sd card and you can't use directory bind to bind data from sd card. So if you wish to play some games on your phone you will be limited by your phone's memory capacity. I hate this, I used to have a lot of big games on my phone and now I can't have more than two at the same time. At the moment I'm reverting back to 4.0.3 ROM just because of that, at least until theres some kind of solution or workaround for this.
Also theres nothing stopping you from playing with other ROM's. Just make a full backup in recovery and you can always go back to the ROM you find most suitable. In fact I would encourage you to download a few ROM's and try them out, see which one you like the most and which one suits your needs the best.
Tux2609 said:
Hi!
I'm glad to hear you made it. Why I use CM? Well, there really is no good answer to that. I was using CM on all my other phones too, I'm used to it, I like its speed and stability, I like look and feel and also I like it's additional options. That being said, there is one problem not with CM but with Jelly bean in general. Android 4.2 has a different directory structure, due to its new multiuser features. The problem with that is that you can't install apps on sd card and you can't use directory bind to bind data from sd card. So if you wish to play some games on your phone you will be limited by your phone's memory capacity. I hate this, I used to have a lot of big games on my phone and now I can't have more than two at the same time. At the moment I'm reverting back to 4.0.3 ROM just because of that, at least until theres some kind of solution or workaround for this.
Also theres nothing stopping you from playing with other ROM's. Just make a full backup in recovery and you can always go back to the ROM you find most suitable. In fact I would encourage you to download a few ROM's and try them out, see which one you like the most and which one suits your needs the best.
Click to expand...
Click to collapse
Thanks for your advice, you & this forum have been nothing short of brilliant, i myself is contemplating going back to ICS 4.0.3 as it also had the option to install apps on to the SD card, as it is my phone memory is almost full which makes even updating apps difficult as there's no more room to even do this.
I've tried certain apps like gemini app manager & driodsail to move apps to the SD card but none of these seem to work. I'm thinking of trying the official B226 firmware from Huawei just to see if it is ok, i know by doing this it will erase the root permissions, as i can't find a rooted version of this firmware and so will need to root again, but now that i have touch recovery on the phone it will be i presume easier to do this.
I hope they have made improvements on B226, because one of the reasons i actually upgraded to JB 4.1.1 was the sound from the stock google music player seemed low in comparison to JB where the sound was a lot better.
Do you think Huawei will release an official Jellybean firmware for this phone?
Any way thanks again, and keep in touch by letting me know how you got on, would be interested to know on what Rom and why and i shall also let you know on anything that i try or use.
Install apps on sd card, jelly bean 4.2
nilbymouth said:
Thanks for your advice, you & this forum have been nothing short of brilliant, i myself is contemplating going back to ICS 4.0.3 as it also had the option to install apps on to the SD card, as it is my phone memory is almost full which makes even updating apps difficult as there's no more room to even do this.
I've tried certain apps like gemini app manager & driodsail to move apps to the SD card but none of these seem to work. I'm thinking of trying the official B226 firmware from Huawei just to see if it is ok, i know by doing this it will erase the root permissions, as i can't find a rooted version of this firmware and so will need to root again, but now that i have touch recovery on the phone it will be i presume easier to do this.
I hope they have made improvements on B226, because one of the reasons i actually upgraded to JB 4.1.1 was the sound from the stock google music player seemed low in comparison to JB where the sound was a lot better.
Do you think Huawei will release an official Jellybean firmware for this phone?
Any way thanks again, and keep in touch by letting me know how you got on, would be interested to know on what Rom and why and i shall also let you know on anything that i try or use.
Click to expand...
Click to collapse
Hey!
I managed to solve the problem with low internal memory on 4.2. I partitioned my sd card with Mini tool partition wizard, made [fat32 ~16Gb] [ext4 ~ 14Gb], and then I used Mounts2SD app from google play to mount my ext partition as internal storage (Reversed Mount option in app). So far everything seems to be working just fine. (I tried the normal mount, just to move data folder to sd-ext but it didn't work).
Tux2609 said:
Hey!
I managed to solve the problem with low internal memory on 4.2. I partitioned my sd card with Mini tool partition wizard, made [fat32 ~16Gb] [ext4 ~ 14Gb], and then I used Mounts2SD app from google play to mount my ext partition as internal storage (Reversed Mount option in app). So far everything seems to be working just fine. (I tried the normal mount, just to move data folder to sd-ext but it didn't work).
Click to expand...
Click to collapse
Hey,
That's great news, i can't even download Mount2SD from google play as it keeps on saying i have insufficient space on internal storage. I have 255mb left surely this app is not bigger than that, so what could be the problem? as i cant even update existing apps. maybe something got messed up and it's either giving the wrong internal storage amount or something, as i was able to update apps from the google play as soon as i rooted and flashed gapps.zip. Now after that first lot i can't seem to download anymore apps or even update them as it's reporting as insufficient storage space and this is with even un-installing some apps. I may have to flash the firmware again to get rid of any crap that was in there and flash recovery/root & gapps as well.
mount sd-ext as internal storage
nilbymouth said:
Hey,
That's great news, i can't even download Mount2SD from google play as it keeps on saying i have insufficient space on internal storage. I have 255mb left surely this app is not bigger than that, so what could be the problem? as i cant even update existing apps. maybe something got messed up and it's either giving the wrong internal storage amount or something, as i was able to update apps from the google play as soon as i rooted and flashed gapps.zip. Now after that first lot i can't seem to download anymore apps or even update them as it's reporting as insufficient storage space and this is with even un-installing some apps. I may have to flash the firmware again to get rid of any crap that was in there and flash recovery/root & gapps as well.
Click to expand...
Click to collapse
Just try to do a full wipe and reflash the rom. I'm still using CM10.1 and it works great. (except the video recording still doesn't work). Be sure to flash the right version of gapps. You can partition your sd card before doing all this, you can even partition it with cwm but it supports the maximum size of 4Gb, so I used mini tool partition wizard (as I mentioned before). When you're done, install mounts2sd from google play, install scripts from there and choose reverse mount option, restart your phone and that should be it, your sd-ext partition is now mounted as internal storage. I strongly recommend class 10 sd cards for this, I'm using one myself and so far haven't experience any lag, even games work perfectly.
Tux2609 said:
Just try to do a full wipe and reflash the rom. I'm still using CM10.1 and it works great. (except the video recording still doesn't work). Be sure to flash the right version of gapps. You can partition your sd card before doing all this, you can even partition it with cwm but it supports the maximum size of 4Gb, so I used mini tool partition wizard (as I mentioned before). When you're done, install mounts2sd from google play, install scripts from there and choose reverse mount option, restart your phone and that should be it, your sd-ext partition is now mounted as internal storage. I strongly recommend class 10 sd cards for this, I'm using one myself and so far haven't experience any lag, even games work perfectly.
Click to expand...
Click to collapse
Thanks mate, i'll give that a go.
Just out of interest now that you have changed the format of your microsd card to ext4, is it still visible as a drive when you connect to the pc,or did you have another program in Windows to make them visible?
nilbymouth said:
Thanks mate, i'll give that a go.
Just out of interest now that you have changed the format of your microsd card to ext4, is it still visible as a drive when you connect to the pc,or did you have another program in Windows to make them visible?
Click to expand...
Click to collapse
Yes, if you connect it as MTP device it shows as u9200 device with two partitions: internal storage (which is sd-ext partition) and sd card.
Tux2609 said:
Yes, if you connect it as MTP device it shows as u9200 device with two partitions: internal storage (which is sd-ext partition) and sd card.
Click to expand...
Click to collapse
Will i loose my cwm touch recovery if i flash the rom again?
nilbymouth said:
Will i loose my cwm touch recovery if i flash the rom again?
Click to expand...
Click to collapse
No.
First post of as long time lurker, so wanted to say hi!
The question is, and you good people are my last hope, is there any way to bring my n7100 back to life after wiping the internal storage?
The story is that i had this phone for almost a year (bought second hand) running several roms (dn3, dn4 and others). Yesterday wanted to switch from ressurection rom to nameless 5.1.1. Flashed twrp to replace the cyanogenmod recovery which was no use here. Resetted it to the latest twrp and wanted to go ahead with flashing the new rom. But, somehow i lost it and wiped the whole internal storage, so lost everything but some mp3s and zip files with rom, gapps and supersu for the one i wanted to start using. Of course after wiping the internal memory i am not able to flash anything on it, only thing i can do is to access either download mode or twrp. Tried to bring it back to life by flashing stuff via odin but all i get is failed after trying to flash the bootloader, both with the pit file and without it. I am aware that this is my really major mess-up but i would like to ask people who are way smarter by me in such cases, is there any way to save this phone? As i mentioned, you guys are my last resort, because i am left without my daily driver, no working pc (tried to flash with odin from my gf's laptop) and being financially ruined, so any help would be much appreciated.
Cheers for reading and any help
gnrxinc said:
First post of as long time lurker, so wanted to say hi!
The question is, and you good people are my last hope, is there any way to bring my n7100 back to life after wiping the internal storage?
The story is that i had this phone for almost a year (bought second hand) running several roms (dn3, dn4 and others). Yesterday wanted to switch from ressurection rom to nameless 5.1.1. Flashed twrp to replace the cyanogenmod recovery which was no use here. Resetted it to the latest twrp and wanted to go ahead with flashing the new rom. But, somehow i lost it and wiped the whole internal storage, so lost everything but some mp3s and zip files with rom, gapps and supersu for the one i wanted to start using. Of course after wiping the internal memory i am not able to flash anything on it, only thing i can do is to access either download mode or twrp. Tried to bring it back to life by flashing stuff via odin but all i get is failed after trying to flash the bootloader, both with the pit file and without it. I am aware that this is my really major mess-up but i would like to ask people who are way smarter by me in such cases, is there any way to save this phone? As i mentioned, you guys are my last resort, because i am left without my daily driver, no working pc (tried to flash with odin from my gf's laptop) and being financially ruined, so any help would be much appreciated.
Cheers for reading and any help
Click to expand...
Click to collapse
I don't get it. You wiped internal, so just copy rom to storage and flash.
you can also try THIS
gnrxinc said:
First post of as long time lurker, so wanted to say hi!
The question is, and you good people are my last hope, is there any way to bring my n7100 back to life after wiping the internal storage?
The story is that i had this phone for almost a year (bought second hand) running several roms (dn3, dn4 and others). Yesterday wanted to switch from ressurection rom to nameless 5.1.1. Flashed twrp to replace the cyanogenmod recovery which was no use here. Resetted it to the latest twrp and wanted to go ahead with flashing the new rom. But, somehow i lost it and wiped the whole internal storage, so lost everything but some mp3s and zip files with rom, gapps and supersu for the one i wanted to start using. Of course after wiping the internal memory i am not able to flash anything on it, only thing i can do is to access either download mode or twrp. Tried to bring it back to life by flashing stuff via odin but all i get is failed after trying to flash the bootloader, both with the pit file and without it. I am aware that this is my really major mess-up but i would like to ask people who are way smarter by me in such cases, is there any way to save this phone? As i mentioned, you guys are my last resort, because i am left without my daily driver, no working pc (tried to flash with odin from my gf's laptop) and being financially ruined, so any help would be much appreciated.
Cheers for reading and any help
Click to expand...
Click to collapse
If your custom recovery is ok no problem at all, copy your rom in a fat32 USB flash drive (you need an adapter to change the port from normal USB to mini or a flash drive with mini USB port) connect to phone mount with your recovery and flash it from there. Both twrp and philz can do this, also philz can mount ntfs and other formats.
Sent from my GT-N7100
I tried, but i am not able to, when trying to flash the rom it showed as not compatible, because it's for n7100 etc, while when the phone got connected to a pc it showed up as t03g, whatever that means.
gnrxinc said:
I tried, but i am not able to, when trying to flash the rom it showed as not compatible, because it's for n7100 etc, while when the phone got connected to a pc it showed up as t03g, whatever that means.
Click to expand...
Click to collapse
T03g is the n7100, your phone is n7100 correct? Also the rom you downloaded is for n7100, you downloaded from here
http://sourceforge.net/projects/namelessrom/files/n-2.1/n7100/
if you are not sure if your phone is n7100 put the battery out and check what is writing.
Sent from my GT-N7100
---------- Post added at 07:21 PM ---------- Previous post was at 07:12 PM ----------
Also I hope you flashed the correct recovery, if you are not sure post the file name for your recovery that you have flashed and the model which you can find down of battery to check it.
Sent from my GT-N7100
Somehow it didn't work through the sd card but got it from a usb stick. Flashing nameless rom now, thanks a lot for help, if any of you guys will be in Warsaw let me know, i'll get you a good beer
gnrxinc said:
Somehow it didn't work through the sd card but got it from a usb stick. Flashing nameless rom now, thanks a lot for help, if any of you guys will be in Warsaw let me know, i'll get you a good beer
Click to expand...
Click to collapse
I am already drinking it
Sent from my GT-N7100
i was running cm12 with no probs on htc one m9
then by mistake i installed the new update and it was cm13.
after the phone rebooted i got google play error saying i need to update google play.
downloaded the latest gapps6 but when trying to install in recovery mode from internal phone memory (as sd card for some reason is not mounted anymore) it gives an error E: FAILED TO MAP
is there a way to go back to cm12 or fix these faults on cm13?
Linx78 said:
i was running cm12 with no probs on htc one m9
then by mistake i installed the new update and it was cm13.
after the phone rebooted i got google play error saying i need to update google play.
downloaded the latest gapps6 but when trying to install in recovery mode from internal phone memory (as sd card for some reason is not mounted anymore) it gives an error E: FAILED TO MAP
is there a way to go back to cm12 or fix these faults on cm13?
Click to expand...
Click to collapse
Install gapps immediately after rom installation, do not allow a full boot..
There is also an issue with the SD and the way it's read, this is an android M issue.
dladz said:
Install gapps immediately after rom installation, do not allow a full boot..
There is also an issue with the SD and the way it's read, this is an android M issue.
Click to expand...
Click to collapse
that's the problem, i didn't realize it's cm13 (thought it's another cm12 nightly) till rebooted the phone...
now it won't allow me to install anything at all giving that e: map... error.
Linx78 said:
that's the problem, i didn't realize it's cm13 (thought it's another cm12 nightly) till rebooted the phone...
now it won't allow me to install anything at all giving that e: map... error.
Click to expand...
Click to collapse
Ask in the forum mate, where u got the rom from.
dladz said:
Ask in the forum mate, where u got the rom from.
Click to expand...
Click to collapse
i'm really sorry if i posted in wrong place... (please direct me in the wright way)
the rom itself was downloaded automaticaly on the phone as an update and i pressed the option update, so the phone rebooted itself into recovery installed it and then i rebooted the phone myself not even looking what was installed... the rest you already know...
Linx78 said:
i'm really sorry if i posted in wrong place... (please direct me in the wright way)
the rom itself was downloaded automaticaly on the phone as an update and i pressed the option update, so the phone rebooted itself into recovery installed it and then i rebooted the phone myself not even looking what was installed... the rest you already know...
Click to expand...
Click to collapse
You will have to have downloaded the rom from xda surely? The Rom you downloaded initially I assume was cm 12.1, then you updated to cm 13, that thread is in the original android development section, I'm sure you can find your way there as you've been there before. The thread is now called cm13 I believe..
Also make sure you're on the latest TWRP recovery, I'm guessing you are but it'd be nice to be sure.
Might also be worth downloading G apps from the cm13 thread then rebooting to recovery, flashing the rom again and installing gapps whilst once complete, don't allow a reboot.
Wiping cache and dalvic will be fine, don't perform a full wipe just incase you can't install the rom again.
If you get stuck, you can push files to your phone using recovery and the push command..
Not 100% but I think storage works via TWRP, could be wrong about that and I've not tested it with cm13.
Either way you have a way back..
---------- Post added at 06:55 PM ---------- Previous post was at 06:55 PM ----------
Install from your internal memory not your SD card. Get the necessary files on your internal memory instead.
thank you very much, will try there.
yes, you are right, got rom from xda and i'm on latest recovery, but no matter what i do, even after wiping cashe still getting the bloody
E: failed to map file
Installation aborted
Linx78 said:
thank you very much, will try there.
yes, you are right, got rom from xda and i'm on latest recovery, but no matter what i do, even after wiping cashe still getting the bloody
E: failed to map file
Installation aborted
Click to expand...
Click to collapse
i can't post anything there... not enough posts...
did i brick my phone now? or is there a way to clean install? recovery mode won't work...
Linx78 said:
i can't post anything there... not enough posts...
did i brick my phone now? or is there a way to clean install? recovery mode won't work...
Click to expand...
Click to collapse
No it'a not bricked..
Are you installing from internal or external memory?
Connect your phone to your computer and go to recovery, then mount storage in recovery, copy G apps to internal memory.
Make more posts in here, i think you need ten
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Also I tried to flas Gapps just after installing MM (not reboot and with Aroma) and the installation freezes, so im stuck with pure Android no Google Apps, so I did return to Lollipop VipeOne 3.5.0 with a full backup made with TWRP.
Sorted. Avoid it til it'a fixed like me unless you want to be a Guinea pig.
dladz said:
Sorted. Avoid it til it'a fixed like me unless you want to be a Guinea pig.
Click to expand...
Click to collapse
sorry, i did copy everything onto internall memory, still no luck...
also the cm13 updated the recovery aswell, and i can't even do a factory reset...
please is there a way to go back to cm12.1?
once again i can't install anything in recovery mode.
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
dladz said:
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
Click to expand...
Click to collapse
that wasn't my post, some else posted here too...
i'm stuck, adb won't install anything too
LLegion said:
I tried it and found Android 6.0 is having issues with my PC, not recognizing my SD Card, not even the Internal SD !!! :S I know it is pure Super fast but i cant live without connecting my phone to PC.
Also I tried to flas Gapps just after installing MM (not reboot and with Aroma) and the installation freezes, so im stuck with pure Android no Google Apps, so I did return to Lollipop VipeOne 3.5.0 with a full backup made with TWRP.
Click to expand...
Click to collapse
i wanted to ask how to go back to cm12.1 from cm13?
i don't have any backups, nor my recovery is allowing to install anything as per post above...
adb method is not working either, just says waiting for the device when rebooted to download and nothing else.
also my firmware is 2.10..... is that an issue?
dladz said:
Hang on you just said you reverted back to viper?
You should be able to install things now?
At this point I'm not too sure mate.. Sorry, perhaps install recovery again, might not be the right thing to do though, ask in the viper thread, you might have enough posts now.
Click to expand...
Click to collapse
i also tried install recovery through adb, didn't work, just says waiting for the device and nothing happens
Linx78 said:
i also tried install recovery through adb, didn't work, just says waiting for the device and nothing happens
Click to expand...
Click to collapse
Nah i'm on 2.10 that's fine.
At this point it appear to be an issue with CM13 rather than anything else, I'm not up to speed with Android 6.0 so I think it would be best if you asked in the thread, you've made over 10 posts now so i'm assuming you can post there.
See what they say, let them know what you've done so far, someone will have either been through it or will know what to do.
Sorry i can't be of more help mate.
PS: Just thought of something, if you have connectivity to your computer / laptop, update your recovery if you haven't already, chances are it's an issue with cm13 but might be worth a try.
I had similar problem - Google Services crashing after unintentional update to CM13.
I realized that I need to install new GApps to fix the issue but GApps installation in recovery was constantly failing.
I used to have some recovery there, I even don't know which one, but during update to CM13 the recovery has been changed to some kind of CM recovery.
After installing TPRW recovery (ir forked for me from the TPRW Manager App from play store) I was able to install Nano GApps.
It solved the issue with Google Services crashing, now I got some Wizard crashing. The issue with crashing wizard is solved by going to privacy setting and allowing the wizard all rights. Later I realized that many other applications were crashing on start as well. I solved it for each of them by uninstalling and installing from Play Store again.
Hello Everybody
I hope you can help me with my first Androidproblem.
I installed rootprivileg on my Tab by flashing Custom-Rom with Odin etc.
Everything was working fine after that. Super-SU was working and i was root and was able to change CPU-Settings and everything else. Now my problem. Since i am a Technerd and always want to learn more, i wanted to restore the system to default to have a clean device. I made a backup with Kies which worked fine (Windows 10). Then i went to the Settings menu on my tab and choose the reset option. Than the screen went black. Since then Android is only booting into CWM-Mode and the Tablet is not recognized anymore by Kies when i connect it via USB-Cable. It is recognized as a USB-Device by Windows but i cant restore the backup on the tablet.
When i press the powerbutton the tab always reboots in CWM-Recovery v. 6.0.4.8.
What can i do to solve the problem? Thank you very much for your help.
I really need it.
Naturestone said:
Hello Everybody
I hope you can help me with my first Androidproblem.
I installed rootprivileg on my Tab by flashing Custom-Rom with Odin etc.
Everything was working fine after that. Super-SU was working and i was root and was able to change CPU-Settings and everything else. Now my problem. Since i am a Technerd and always want to learn more, i wanted to restore the system to default to have a clean device. I made a backup with Kies which worked fine (Windows 10). Then i went to the Settings menu on my tab and choose the reset option. Than the screen went black. Since then Android is only booting into CWM-Mode and the Tablet is not recognized anymore by Kies when i connect it via USB-Cable. It is recognized as a USB-Device by Windows but i cant restore the backup on the tablet.
When i press the powerbutton the tab always reboots in CWM-Recovery v. 6.0.4.8.
What can i do to solve the problem? Thank you very much for your help.
I really need it.
Click to expand...
Click to collapse
Read the last post of the CWM thread.
Sent from my SM-G920V using Tapatalk
Could you please sent me a link to the CWM-Thread, so that i know with thread you mean? That would be very friendly.
I think i got the idea for solving the problem, but after reading for 8 hours on xda i feel like i am blind. So many different roms....so many ways to handle it. I am confused.
I would like to install the Una T111-Rom which also seems to work with the T110 Tab. But there is a big problem: Since i dont have access to my sd-card anymore i cant copy the rom in the backup-folder on the sd. I could take the sd-card out of the tab if i would find the adapter to the bigger format SD-Card, then i could put the card in my notebook and copy the file in the right directory. Maybe it would work then and i have a nice safe googlefree Tab.
Thank you very much for your kindness
Maybe using Adb is an option?:fingers-crossed::
I hope i have a solution now. I will try to install the Criskelo-Rom (although i am not a big fan of the dark colors in there) with Odin. I hope it works....because its starting to get intense....for a newbie like me.
Hello everybody
After having a constant bootloop in the CWM-Recovery i now managed to flash TWRP v.2.7.0.1 and it works. At least i boot into TWRP instead of CWM now. Its the TWRP-Version of SELinux and i cant access the kernels content, it says. What would be the next step? I can access my data on the (wiped) sd and main partition now but i still dont have the possibility to install the rom i would like (Criskelo or Stock NE4lite for T110) because i cant get it on the sdcard. I would really like to get back in the Androidbootup of my Tab...
Please help me out. I really need your experience with this. It took me 24 hours and a lot of reading, downloading etc to get to this point.
Thank you very much.
Very beautiful TWRP-Interface bye the way. Very impressive.
It says: Kernel does not have support for reading SELinux contents.
Hello guys
Keeping you up to date. I am smarter now...
I flashed the device with this custom-rom: T110UEUANE4. I transferred this file to my sdcard using ADB and then installed the Rom. Worked perfect.
Great Tutorial: https://www.youtube.com/watch?v=VTGIAzofZCM
After rebooting i was hoping it would boot into Android, but it didnt. It booted into the TWRP and the screen flickered.
So i flashed again with this one: Philz Touch Advanced CWM recovery
Here i had the problem that ADB didnt work, so i flashed back the TWRP 2.7.0.1
I would like to know why i cant boot into Android after i installed the Custom-Rom for T110.
Any help and suggestions are deeply appreciated cause i am learning fast but i am still learning.
Bye the way: Now i understand how you can get addicted to flashing. But it would be nice to be able to boot in the system again...
Many thanks for your help.
Naturestone said:
Hello guys
Keeping you up to date. I am smarter now...
I flashed the device with this custom-rom: T110UEUANE4. I transferred this file to my sdcard using ADB and then installed the Rom. Worked perfect.
Great Tutorial: https://www.youtube.com/watch?v=VTGIAzofZCM
After rebooting i was hoping it would boot into Android, but it didnt. It booted into the TWRP and the screen flickered.
So i flashed again with this one: Philz Touch Advanced CWM recovery
Here i had the problem that ADB didnt work, so i flashed back the TWRP 2.7.0.1
I would like to know why i cant boot into Android after i installed the Custom-Rom for T110.
Any help and suggestions are deeply appreciated cause i am learning fast but i am still learning.
Bye the way: Now i understand how you can get addicted to flashing. But it would be nice to be able to boot in the system again...
Many thanks for your help.
Click to expand...
Click to collapse
You need to install stock recovery. Then reboot. The first reboot will boot into recovery, then you should be able to boot into rom.
Sent from my SM-T310 using Tapatalk
Hello Everybody
I flashed my Tab successfully now with the custom-rom from mknrls. Many thanks for your work and your passion.:good:
Also i want to thank gr8nole for the keyword: Stock Recovery. Thanks for your files and your help.
The Tab is running well, except for the issue with the contacts - which is not such a big deal cause i use my Nokia N9 as a phone...not only as a phone... After flashing, it took me several days to "recover" myself from the loss of sleep.
I flashed the Tab 4 days ago.
My next Custom-Androidrom will probably be on my beloved N9.:good:
Maybe i will try to install UNA-OS on my Tab...i think i am becoming flash-addicted.
Sent from my SM-T310 using Tapatalk[/QUOTE]
I made this so let me know if it works I tested it on my phone and my girlfriends phone it's for the Hannah varient which is MetroPCS/T-Mobile this was my first ever project I updated it today try out the new one
twrp by SIR KRIEGER and decrypting files credits go out to authors of those files
https://drive.google.com/folderview?id=105qE_sXIiCF2W9IffzSMpfFUXQc7N-dz
sirkrieger1993 said:
I made this so let me know if it works I tested it on my phone and my girlfriends phone it's for the Hannah varient which is MetroPCS/T-Mobile this was my first ever project ill be updating g the version tomorrow to the newest twrp source
twrp by SIR KRIEGER
https://drive.google.com/file/d/1ylBbg4gZt4tXGz-EBnrYtcO9AjXA2qNv/view?usp=drivesdk
Click to expand...
Click to collapse
yes it seems to not work at 1st on first boot! doesnt detect storage 0mb
but when i hit wipe/advanced wipe/data then
hit repair change file system then hit change file system
to ext2 then back ext2
it detects internal storage
but when i booted into android it wanted to encrypt data and wipe it.
so i manually wiped data in recovery then rebooted an bam it works
an it still detects my internal storage........yay thank you so much
it just doesnt detect my micro sd card
brandonlee96 said:
yes it seems to not work at 1st on first boot! doesnt detect storage 0mb
but when i hit wipe/advanced wipe/data then
hit repair change file system then hit change file system
to ext2 then back ext2
it detects internal storage
but when i booted into android it wanted to encrypt data and wipe it.
so i manually wiped data in recovery then rebooted an bam it works
an it still detects my internal storage........yay thank you so much
it just doesnt detect my micro sd card
Click to expand...
Click to collapse
I'll look into trying to fix it but my SD card words so that's weird
Ok so I tried it on another friend of mines phone and his sd card and everything is working fine so I'm really confused why yours wouldn't work????
Me too I really don't understand it.
I'll keep looking into it for you...I wish other people would let me know how it's working on there device
I didn't realize people were still having issues with twrp on the tmo/Metro variant. Id have to double check with Aeorsyn but im pretty sure we posted one somewhere in this forum that works...at least for me...perfectly with the exception of the time being off every now and then. It flashes zip and image files, makes backups, restores, wipes, works with twrp themes, reads internal and external sd, and even usb via otg. I've been running it for a couple months now without issue. Is there something im missing that people are trying to do that I'm just blind too? Lol if anyone wants a link to the twrp I'm using just lemme know.
Sent from my Motorola moto e5 plus using XDA Labs
theUsualSuspexx said:
I didn't realize people were still having issues with twrp on the tmo/Metro variant. Id have to double check with Aeorsyn but im pretty sure we posted one somewhere in this forum that works...at least for me...perfectly with the exception of the time being off every now and then. It flashes zip and image files, makes backups, restores, wipes, works with twrp themes, reads internal and external sd, and even usb via otg. I've been running it for a couple months now without issue. Is there something im missing that people are trying to do that I'm just blind too? Lol if anyone wants a link to the twrp I'm using just lemme know.
Click to expand...
Click to collapse
Please
I tried the one that was posted and I couldn't flash anything so I tried the James varient but I couldn't flash it I had to fastboot boot it
theUsualSuspexx said:
I didn't realize people were still having issues with twrp on the tmo/Metro variant. Id have to double check with Aeorsyn but im pretty sure we posted one somewhere in this forum that works...at least for me...perfectly with the exception of the time being off every now and then. It flashes zip and image files, makes backups, restores, wipes, works with twrp themes, reads internal and external sd, and even usb via otg. I've been running it for a couple months now without issue. Is there something im missing that people are trying to do that I'm just blind too? Lol if anyone wants a link to the twrp I'm using just lemme know.
Sent from my Motorola moto e5 plus using XDA Labs
Click to expand...
Click to collapse
Please ! , Thanks & Merry XMas!
Twrp deletes stock rom
Maybe you can help me out, maybe im missing something. I have the g5 (hannah) MetroPCS variant. Everytime I flash TWRP it deletes my system. Ive tried 3 other TWRPs with no luck. One way or another I cannot boot, (bad key). Then I reflash my stock rom and try again. Ive tried with and without allowing system modifications with no avail. However when I first flash and boot into recovery there is a screen asking to decrypt. it asks to enter a password but the screen doesnt respond to touch for the pattern dots. Does that decrypting need to happen for TWRP to work correctly? Thanks
scaicardi said:
Maybe you can help me out, maybe im missing something. I have the g5 (hannah) MetroPCS variant. Everytime I flash TWRP it deletes my system. Ive tried 3 other TWRPs with no luck. One way or another I cannot boot, (bad key). Then I reflash my stock rom and try again. Ive tried with and without allowing system modifications with no avail. However when I first flash and boot into recovery there is a screen asking to decrypt. it asks to enter a password but the screen doesnt respond to touch for the pattern dots. Does that decrypting need to happen for TWRP to work correctly? Thanks
Click to expand...
Click to collapse
dm me, I have a working twrp build and stock system image on google drive
scaicardi said:
Maybe you can help me out, maybe im missing something. I have the g5 (hannah) MetroPCS variant. Everytime I flash TWRP it deletes my system. Ive tried 3 other TWRPs with no luck. One way or another I cannot boot, (bad key). Then I reflash my stock rom and try again. Ive tried with and without allowing system modifications with no avail. However when I first flash and boot into recovery there is a screen asking to decrypt. it asks to enter a password but the screen doesnt respond to touch for the pattern dots. Does that decrypting need to happen for TWRP to work correctly? Thanks
Click to expand...
Click to collapse
Did you try using the decrypt.zip
sirkrieger1993 said:
Did you try using the decrypt.zip
Click to expand...
Click to collapse
No I have not...I will try and find a copy.
sirkrieger1993 said:
Did you try using the decrypt.zip
Click to expand...
Click to collapse
I used Sir's (THANKS!) twrp and just booted it without flashing,(worked great!) it boots fine but asks for unlock pattern and doesn't accept the one I have set, (I'm guessing this is where decrypt.zip comes into play, but unsure), I hit cancel and KEPT READ ONLY , then made individual backups of boot + system + system.image
I also get the Bad key however I believe this is normal after unlocking the bootloader.. If you wait a bit it should still eventually boot.. I'd like to try to make a boot animation..
scaicardi said:
No I have not...I will try and find a copy.
Click to expand...
Click to collapse
turns out its not deleting the rom. its a problem with the boot image or encryption . When i first boot into twrp i cannot see internal storage. if i change my partition from ext4 then back to ext2 it shows up and the decrypt.zip is successful. however when i reboot phone it hangs at motorola screen. I then went back to fastboot and flashed stock boot.img and the phone almost booted up. I got hung at decryption unsuccessful perform factory reset. I dont know why this is so complicated any suggestions.
kinda sucks i go in for surgery and wake up and find a new twrp for hannah good luck ill be deleting my guide instead of working on twrp bye
Good to see work being done on the device!
skullkid383 said:
kinda sucks i go in for surgery and wake up and find a new twrp for hannah good luck ill be deleting my guide instead of working on twrp bye
Click to expand...
Click to collapse
Bro no keep it up don't hurt to have two twrps that worrk for are device
Project89Odin said:
Good to see work being done on the device!
Click to expand...
Click to collapse
Thanks bro I got a few gsi ROMs to boot up and work also to I'll post a thread soon on which ones I got working so there's more custom ROMs that work