Develop Bugs

[Q] CM10 with trinity

Can anyone who is using trinity with cm10 tell me how to flash the kernel ?
Everytime I flash it I get the trinity logo and then nothing but a black screen.
Help will be appreciated.
Thank You.

viraj071 said:
Can anyone who is using trinity with cm10 tell me how to flash the kernel ?
Everytime I flash it I get the trinity logo and then nothing but a black screen.
Help will be appreciated.
Thank You.
Click to expand...
Click to collapse
I was just told by someone that more current versions of CM10 don't work. You'll have to install older versions and see what works. Can you post this when you find out?

viraj071 said:
Can anyone who is using trinity with cm10 tell me how to flash the kernel ?
Everytime I flash it I get the trinity logo and then nothing but a black screen.
Help will be appreciated.
Thank You.
Click to expand...
Click to collapse
you need to post more info than this.
what ROM did you flash?
what version of said ROM?
did you format all partitions before you flashed?
did you verify your download was good with an md5 checksum?
what recovery are you using?
since you cannot boot into your current ROM, because you have an outdated kernel flashed to your disk....but first pull your battery out.....
put battery back in
hold volume up, your home button, and the power button (in that order) until you see a small line of text flicker on the top of your screen, then release all buttons. you are now in recovery.
wipe cache 3 times
wipe dalvik cache 3 times
re-flash your current ROM
let it boot.
let it sit until the screen automatically turns off
after it boots...go to the original android dev section, download lean kernel 1.9 to your device, boot to recovery again, wipe cache, wipe dalvik cache, flash kernel. just a guess, but i bet that fixes it.
good luck

cobraboy85 said:
you need to post more info than this.
what ROM did you flash?
what version of said ROM?
did you format all partitions before you flashed?
did you verify your download was good with an md5 checksum?
what recovery are you using?
since you cannot boot into your current ROM, because you have an outdated kernel flashed to your disk....but first pull your battery out.....
put battery back in
hold volume up, your home button, and the power button (in that order) until you see a small line of text flicker on the top of your screen, then release all buttons. you are now in recovery.
wipe cache 3 times
wipe dalvik cache 3 times
re-flash your current ROM
let it boot.
let it sit until the screen automatically turns off
after it boots...go to the original android dev section, download lean kernel 1.9 to your device, boot to recovery again, wipe cache, wipe dalvik cache, flash kernel. just a guess, but i bet that fixes it.
good luck
Click to expand...
Click to collapse
You actually don't have to wipe the caches at all. Just flash the kernel and you're good. There is code built in to kernels that takes care of the old kernel for you. And leankernel is NOT trinity.
Anyways CM10 just released a stable release today so I'll wait for trinity to catch up.

sherfick said:
You actually don't have to wipe the caches at all. Just flash the kernel and you're good. There is code built in to kernels that takes care of the old kernel for you. And leankernel is NOT trinity.
Anyways CM10 just released a stable release today so I'll wait for trinity to catch up.
Click to expand...
Click to collapse
I understand lean kernel is not trinity. I told him to flash that one because it will actually boot.
And I instructed him to wipe caches because he needed to re-install his ROM... as it would not boot.
Sent from Galaxy S III

cobraboy85 said:
I understand lean kernel is not trinity. I told him to flash that one because it will actually boot.
And I instructed him to wipe caches because he needed to re-install his ROM... as it would not boot.
Sent from Galaxy S III
Click to expand...
Click to collapse
One wipe is always plenty. But 3 won't hurt I guess
Sent from my SGH-T999 using xda premium

My apologies cobraboy, I skimmed through your post. I've been frustrated trying to get trinity. Cm10's kernel is actually performing very well for me, I have half my battery after a full day of normal use! I recommend installing the new stable version of CM10 and just leave the kernel alone.
Sent from my SGH-T999

[Q] Boot Loop, Need help!

i have been running the kiss kernel for a while now, last night i tried to flash the hellboy kernel and retern to my pacman rom. but it still boots, i have cleared all my caches formated everything but my sd card, have tried flashing all kiss kernels and multipul hellboy kernels, but never gets passed the boot screen.. any ideas?

i managed to get it to the android is upgrading.. starting apps thing, but it gets stuck there.

Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?

lilrob1213 said:
Did you wipe anything when you flashed the kernel? If the kernel was for jellybean it shouldn't hang like that... not sure?
Click to expand...
Click to collapse
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement

JARR3DF15CH3R said:
yeah i wiped the cache, devlink cache, data, system, and a factory reset, been trying to figure it out all day but have not made much improvement
Click to expand...
Click to collapse
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?

lilrob1213 said:
and you installed a rom after wiping those things right? I'm assuming... but just wondering. What rom did you flash and are you CDMA virgin mobile?
Click to expand...
Click to collapse
yeah i installed it after, pacman http://forum.xda-developers.com/showthread.php?t=1948770&page=12
im with telus gsm. the rom was working fine, but i went to change the kernel to hellboy cause i herd it was a bit better and now im in this bootloop

also not running the newest version of that rom, i am running v15a

Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?

lilrob1213 said:
Oh okay wellllll I'm on virgin mobile and I don't know much about the primou phones and rom and kernel compatibility so I'm afraid I'll have to leave this to someone who knows more... good luck to you though... maybe try booting into bootloader from the recovery and flash the boot.img you had before then flash the rom again?
Click to expand...
Click to collapse
thanks anyways, ill be sure to give that a try:silly:

Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!

bahubali67 said:
Did u wait Little longer time while first boot???? Choose latest kernel n flash. .
Hit thanks if I helped u!!!
Click to expand...
Click to collapse
yeah i always wait a little while, i have chosen latest kernel, has not made a difference, i have gotten better results using an older one of the titanium kiss, hellboy doesnt seem to work with my phone for some reason

Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.

mihirengg19 said:
Did you use the command
fastboot flash boot boot.img or just
fastboot boot boot.img?
Also,after flashing it,does the terminal say something like this?
Okay.
Okay.
Finished.
Edit:also,see that you are flashing the kernel in the fastboot screen(where it says 'fastboot usb'),and not in the Hboot(bootloader) screen.
Click to expand...
Click to collapse
i am using the all in one tool kit to flash my kernel, yes i am in fastboot, a window pops up runs through code and my phone reboots, i have changed the kernel on it before, but for some reason this time it wont boot properly at all, the phone is currently at the " android is upgrading" screen, it was the starting apps box with the spinning circle

if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.

1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel: hellboy
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
thank you so much 1ceb0x! my phone has been in this bootloop for an entire 24 hours,

1ceb0x said:
if you say that it is stuck at android is upgrading - that's because the dalvik works and it is deodexing your gapps.
so i suppose you flashed kernel, flashed rom and gapps and rebooted. well this works from time to time but you have to reboot between flashing rom and gapps.
1. download this kernel:
2. go to bootloader and flash the kernel.
3. go to recovery and: do a factory reset + wipe system - no need for wiping dalvik or cache cause factory reset does them both.
4. flash your rom
5. reboot.
6. if it boots properly, reboot to recovery and now flash GAPPS package.
Click to expand...
Click to collapse
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!

chikuera said:
hey icebox, i have the same problem, stuck on pacman logo
can you tell me which hellboy kernel should i use?
i've flashed the 1st one on the mediafire list. thanks!
Click to expand...
Click to collapse
Thats the old version.... See the changelog code and flash dat in future..... Right now.... Here u go....
http://www.mediafire.com/?waggdha1ir1lxz0

[Q][Resolved] Freezing after install any kernel.

Hi guys,
Im facing problem here, if i install any firmware my rom getting freeze, Kindly assist me pls.
.587
Already unlocked bootloader
Already root my device
i follow the instruction to install kernel
Thanks in advance.
Edit:
Case resolved.
It was my mistake. at last i learned from mistake
to go to recovery mode shud press Back button.
thanks for the reply guys.

Does flashtool show any bad blocks?? Can you see the kernel logo??

Do you wipe your dalvik cache after changing kernel? If not then the rom will probably fail.

With full wipe?

LoneWanderer said:
Does flashtool show any bad blocks?? Can you see the kernel logo??
Click to expand...
Click to collapse
No bad blocks. its hang at kernel logo. im unable to reboot cwm as well. i did follow the instruction well
i tried fastboot & flashtool both giving same freezing issue.

sinkster said:
Do you wipe your dalvik cache after changing kernel? If not then the rom will probably fail.
Click to expand...
Click to collapse
after delete dalvik cache also still remain same

rod555 said:
With full wipe?
Click to expand...
Click to collapse
do i need to do the full wipe before install the kernel or after?

you dont need to wipe data after installing a kernel. but you should wipe data and dalvik...
Sent from my Xperia Arc S using xda premium

Stuck at HTC welcome screen after flashing kernel

Hey,
I used the 18.5 version of Shpongle with the 14.5 version of HELLBOY kernel until today.
I tried to update only the kernel today to the latest HELLBOY (21.5), so what I did I booted into recovery (TWRP), erased only cache and dalvik, and flash the new version of the kernel using cmd, with these two commands:
Code:
Fastboot flash boot boot.img
fastboot reboot
After my One V rebooted, it got stuck on the HTC welcome screen (with the red development purposes warning) and I can't get out of it, all I can do is reboot then it comes back to that screen.
What did I do wrong? Can I fix that somehow? I can't seem to go back to recovery so it feels lost...
Thank you for any help.

Might be a bad flash. Wipe everything and reflash, then try to reboot.

MameTozhio said:
Might be a bad flash. Wipe everything and reflash, then try to reboot.
Click to expand...
Click to collapse
How do I wipe everything? My PC doesn't recognize the SD and I can't go to recovery...

amiregelz said:
How do I wipe everything? My PC doesn't recognize the SD and I can't go to recovery...
Click to expand...
Click to collapse
Turn off the phone and quickly press volume down and power on to try to get into bootloader otherwise it will turn itself back on (happened to me before when I got a bad flash). Try to get into recovery from there.

MameTozhio said:
Turn off the phone and quickly press volume down and power on to try to get into bootloader otherwise it will turn itself back on (happened to me before when I got a bad flash). Try to get into recovery from there.
Click to expand...
Click to collapse
Thank you! that's what I was looking for. I was hopeless. Thanks again!
Is there something wrong with what I did to update the kernel? I kept the ROM and just deleted the cache and dalvik and then flashed the new kernel. I just don't want to lose all the data so I'm hoping to fix it without wiping everything.

amiregelz said:
Thank you! that's what I was looking for. I was hopeless. Thanks again!
Is there something wrong with what I did to update the kernel? I kept the ROM and just deleted the cache and dalvik and then flashed the new kernel. I just don't want to lose all the data so I'm hoping to fix it without wiping everything.
Click to expand...
Click to collapse
No there was nothing wrong with what you did to update the kernel, you were just unlucky and got a bad flash. If it still gets stuck try reflashing the ROM, without wiping data.

MameTozhio said:
No there was nothing wrong with what you did to update the kernel, you were just unlucky and got a bad flash. If it still gets stuck try reflashing the ROM, without wiping data.
Click to expand...
Click to collapse
Thank you for your help, it was the wrong HELLBOY version - the HELLBOY kernel MediaFire library is very confusing. I picked the CM9 kernel instead of the 42 one. Now everything's working

amiregelz said:
Thank you for your help, it was the wrong HELLBOY version - the HELLBOY kernel MediaFire library is very confusing. I picked the CM9 kernel instead of the 42 one. Now everything's working
Click to expand...
Click to collapse
That's good , and you're welcome btw!

Help
How can i flash kernel under Ubuntu 13.04???

[Help] Problem with ElementalX

My phone HTC One M8 international. I'm use Rom ARHD 7.0 and dot view with kernel ElementalX 0.18. I'm choose stock during Aroma install, don't overclock or undervolt but my phone is always reboot. Back 0.10, my phone is good no problem. Help me.

Kent21 said:
My phone HTC One M8 international. I'm use Rom ARHD 7.0 and dot view with kernel ElementalX 0.18. I'm choose stock during Aroma install, don't overclock or undervolt but my phone is always reboot. Back 0.10, my phone is good no problem. Help me.
Click to expand...
Click to collapse
Maybe try reinstall kernel. Im on the same ROM and 0.18 Kernel and everything works perfekt.

VectorM8 said:
Maybe try reinstall kernel. Im on the same ROM and 0.18 Kernel and everything works perfekt.
Click to expand...
Click to collapse
tks for reply but reinstall kernel, my phone is always reboot

Kent21 said:
tks for reply but reinstall kernel, my phone is always reboot
Click to expand...
Click to collapse
Redownload ElementalX to make sure you don't have a corrupt file. Wipe cache and dalvik in recovery and re-install again.

GermanGuy said:
Redownload ElementalX to make sure you don't have a corrupt file. Wipe cache and dalvik in recovery and re-install again.
Click to expand...
Click to collapse
i'm download kernel with my pc and copy to phone with usb, not download over air. check md5 is correct. Wipe cache and dalvik in recovery before reinstall kernel. but my phone is reboot 10 times. i don't understand my phone. i think my problem is dot view
http://forum.xda-developers.com/showthread.php?t=2705613&page=187