Android wear keeps looking conection to moto 360 - Moto 360

Hi guys, I am hav I ng this issue with latest android wear's update, if I am not using the clock with the phone I usually turn of conection on the android wear, but, if I go back and then again open the android wear app it just turned on the conection. It doesn't turn on Bluetooth, just activate the app switch, you know what I mean? If don't let me know
Enviado desde mi SM-T700 mediante Tapatalk

My phone is a Moto x2 with stock Android 6 (retail Brazil ota)
Enviado desde mi XT1097 mediante Tapatalk

No one?
Enviado desde mi XT1097 mediante Tapatalk

If you have turned off google now cards, then turn it on. The connection is much more stable on my watch after doing this. Hope it helps you too. Mine disconnects only after i install any new app/watchface. But a restart fixes that.

Related

[Q] 3g is intermittent

Hey guys
I have a serious problem with my Xperia ZL that's driving me nuts... Everytime I try to use any app that needs mobile data access, my 3g works fine fot about 30 secs, then it disconnects (the 3g symbol disappears from the top bar) for about 5-10 seconds and it reconnects again until the cycle starts again.
This whole thing started since I tried to root my phone. The process went wrong and I had to flash the phone with Sony's recovery app, but my 3g never acted as it was before.
Do you know what could be going on? Or should I ask for a new phone?
I have a similar problem. Even in 2G modo. But my time off is bigger
Enviado desde mi C6502 mediante Tapatalk
melquisedec said:
I have a similar problem. Even in 2G modo. But my time off is bigger
Enviado desde mi C6502 mediante Tapatalk
Click to expand...
Click to collapse
Hey there, sorry for the delay.
Finally I was able to fix this. It was a company's problem, not mine. They adjusted some parameters here and there and magically, my 3G worked properly again. So maybe you should just call your company and talk to a tech guy, tell him that you did every test out there and that you're absolutely possitive that it's their problem =)
Best!
Do you know the config?
Enviado desde mi C6502

11-c0255 issues. bluetooth and weather app.

Just installed a new 11-c0255 into my car. When I attempt to set up bluetooth I can find my phone no problem but when they try attempt connect you can see the bluetooth icon appear for a split second on the car screen, and the bluetooth buttons become colored. Then it all goes back to grey. A few second later it happens again(both the bluetooth icon and the colored buttons) then back grey.
I have tried on with both mine and my girlfriends phone and it does the same with both.
Also the weather app is always blank, even if i manually add a city it remains blank.
Any ideas?
Interesting enough my friends Iphone and his girlfriends stock HTC both connect fine. Could be a bluetooth issue with the CM13 me and my g/f are running.
Confirmed an issue with the CM13 rom we are using.
Still dont know why I have the blank weather app.
Finally! I thought i was the only one. CM13 in my Oneplus One does the same thing. I go back to 12.1 (5.1.1) and all is fine.
EDIT: Mine is a Pumpkin C0250
I have a OnePlus One and have been having TERRIBLE problems with Bluetooth not always connecting. I haven't suspected the phone because my Bluetooth OBD dongle also can't connect when it happens... but it may be possible something the phone is doing is crashing the bluetooth stack on the radio. Guess I'll switch back to the old Nexus 5 for a test run... *sighhhh*... Changing SIMs is a pain because I have a pretty hefty case on the OnePlus One.
EDIT: Oh, I see you were on CM13. I'm still on CM12.1 YOG4PAS3JL. Still, worth a shot.
singlecell83 said:
Also the weather app is always blank, even if i manually add a city it remains blank.
Any ideas?
Click to expand...
Click to collapse
Start here: http://forum.xda-developers.com/android-auto/mtcb-android-head-units-qa/weather-widget-t3305168
Hello. I have this problem too. My phone is a oneplus one. When i was on cm12.1 I had no problems at all. Now I'm on cm13 and i have exactly the same issue as you... Connects and disconnects two times, just for a moment and then keeps disconnected...
Bluetooth media works fine...
Anybody know any fix?
Thnx!
Enviado desde mi A0001 mediante Tapatalk
---------- Post added at 09:14 PM ---------- Previous post was at 09:13 PM ----------
itzal77 said:
Hello. I have this problem too. My phone is a oneplus one. When i was on cm12.1 I had no problems at all. Now I'm on cm13 and i have exactly the same issue as you... Connects and disconnects two times, just for a moment and then keeps disconnected...
Bluetooth media works fine...
Anybody know any fix?
Thnx!
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
Enviado desde mi A0001 mediante Tapatalk
singlecell83 said:
Also the weather app is always blank, even if i manually add a city it remains blank.
Any ideas?
Click to expand...
Click to collapse
Try this:
http://forum.xda-developers.com/showpost.php?p=65228919&postcount=1353
With this version my weather app start working.

MXB48T kilos sound on my Píxel C

As the title says (*kills). Sound working ok and after the update when I don't use the tablet for a while sound goes off for all the system. I reboot it and after the reboot it works. But several minutes later the sound is dead again. Any one with this issue???
This is so f..king annoying.
Thanks!!
Edit: kills the mic too.
Edit2: while it's charging through the charger it seems, even letting it a while locked, that sound doesn't go off. Really Google? So fuc..d up developers you have?
Enviado desde mi Pixel C mediante Tapatalk
No problems here with the update.
All good here too
Mine is also fine on the new update.
Could be a bad flash. Try flashing the factory image and seeing if that helps.
Don't have a USB C cable and I won't buy one for this ****ty tablet. I spend 500€ to work my ass out to make this thing run okay? Hell no. Rooted and unlocked all my Android devices, not this one guys. It's really annoying. A month a go my nexus 6 battery died. Do you know how many years my Galaxy SIII worked before saying good bye? 5 years.
Back on topic. Safe mode won't help, sound even does not comes up at start. Factory reset won't help, issue persists. Only when charging sound wont go off.
Enviado desde mi Nexus 6 mediante Tapatalk
Maybe you have a bad device?
Never seen that issue on mine or on wife's, but my sample size is 2 ....
beardymcgee said:
Maybe you have a bad device?
Never seen that issue on mine or on wife's, but my sample size is 2 ....
Click to expand...
Click to collapse
Yes post it in google forums products and obvious answer came up like "safe mode", bla, bla, bla.
Already done an RMA. I won't bother myself doing anything else than updating via OTA with this Google device.
Thankfully the Google representative was really really nice and did all the tedious work a pleasure :laugh:
Same here. Sound won't work after a while. Reboot helps.
No errors during flashing the factory image. Even the keyboard upgrade worked flawlessly.
Sound Issue
I had a sound issue yesterday on my tablet, which may or may not be the same thing.
No media sounds coming out of the speakers, even though the volume was turned up high, odd thing was notifications still seemed to work - i.e. calendar reminders still made the notification sounds and trying to change notification sounds also played the sounds as usual.
Grabbed my headphones and plugged them in and media sound was OK - removed headphones again and speakers were back.
I had been been using my tablet to watch movies on a flight back home with my headphones and assume that for some reason the tablet did not identify the removal event - so still had the speakers blocked!!
No errors too when flashing my unit. But there the problem was.
Regarding about plugging headphones in and out, and reverting sound back to normal, did not work for me. But when sound was working after restart and headphones were plugged, before every media sound was played a clacking noise appears.
Enviado desde mi Nexus 6 mediante Tapatalk
I came here to post the same issue. At first I thought it was a third party app, however it is not. I'm currently in contact with Nexus Support and will update when I have an answer.
Edit: contacted Google Support and, of course, trouble shooting came down to a factory reset. I will try this and update if the issue was resolved.
Didn't work for me
Enviado desde mi Nexus 6 mediante Tapatalk
New unit here. Updated to last fw. So far everything OK. Will post with updates.
Enviado desde mi Pixel C mediante Tapatalk
Hazzo31 said:
New unit here. Updated to last fw. So far everything OK. Will post with updates.
Enviado desde mi Pixel C mediante Tapatalk
Click to expand...
Click to collapse
I'm experiencing the lost sound problem. Please let us know if the problem returns on your new unit. Haven't decided whether to RMA mine.
madAdam6LOVE said:
I'm experiencing the lost sound problem. Please let us know if the problem returns on your new unit. Haven't decided whether to RMA mine.
Click to expand...
Click to collapse
Update here was working flawlessly. I activated Google now when screen off and issue returned. Seems to be software. But I don't understand why the factory reset on the other unit didn't fixed it. Try turning that option off.
Enviado desde mi Pixel C mediante Tapatalk
I thought this had happened to me too but then after reading through this and someone mentioned audio blocking I remembered that I had this button called Pressy installed in my headphone jack, once I removed it, the sound worked again!
Sent from my Pixel C using Tapatalk

Moto 360 didnt sync watchfaces

Hi guys, im kind of new in smartwatches and i have a problem with my moto 360. I have i Note 5 with android 5.1.1 and my moto360 runs android 4.4w (tried a million times to force update and nothing), android wear and moto connect sync good no issues, but if i install facer or another watch faces app the watch didnt show up anything, in moto conect if i change the apparience and save changes the watch didnt refresh...
Please help me, this is going me crazy....
Enviado desde mi SM-N920I mediante Tapatalk
My problem was OS version, I made a DIY usb cable and update to 5.1.1 manually, thanks to all.
Enviado desde mi SM-N920I mediante Tapatalk

Smart lock?

Most of smart lock features are missing, the only present is Bluetooth smart lock and it doesn't work, can't find any of my connected devices. It's a know problem, can I do anything to solve this issue?
Sent from my MI MAX using Tapatalk
Mi Band 2 should work.
Even Mi Band 1 is working.
Install RR 5.8

Categories

Resources