Asus fonepad 7 / Bricked/USB screen show/Not detected by computer - Asus Fonepad 7

I have an ASUS K012 \fe170cG tablet and wanted to change my ROM but I encountered this problem that only USB screen shows up and then it turns off and on. Can't enter droidboot. Anyone can help? Thanks in advance.

Ummmmm. If you can't enter droidboot mode, your tablet is dead. Try try. If you can enter droidboot, you can look through the forums. Im sure i posted a guide to unbrick the tab somewhere. If not get it to a service center fast

Related

[Q] LG G3 stuck in fastboot

Hello!
I have one LG G3 D815 16GB wich is stuck on fastboot mode, all I can do on it is to enter the Hard Reset menu, but even if I choose Yes from that menu, nothing happens.
When I try to put it in Download Mode it does nothing, but after few moments after the phone is connected to PC on screen appears "[211630] Fastboot mode started".
Can anyone help me? The phone has get bricked from nothing, I didn't do anything to him to get it bricked.
If I try to power it on normally it remains stucked with LG logo on the screen.
Can anybody help me? With a tutorial or something?
Thx!
PS: I didn't installed any custom firmware or something like this on this phone. I attached down there a photo with the screen wich appears after I connect it to PC.
The same problem as me: http://forum.xda-developers.com/lg-g3/help/lg-g3-hard-break-t2977485
No one can help me?
Do you have warranty?
I believe jtag is only option here as you cant enter anywhere.
Happened to me today, this one worked! http://forum.xda-developers.com/showpost.php?p=57655028&postcount=15

[Q] LG G3 D855 Error: Boot Certification Verify

Hi guys,
I was running CloudyG3 2.5 on my D855. Today I wanted to go back to stock using LG Flash Tool with D85520h firmware file (lollipop) (in Windows 10). It got stuck at 4%. After waiting for close to an hour, I just unplgged the device. Now when I power it up, I get the secure boot error message and it starts blinking the notification LED (alternating red and blue). Going into download mode also brings up the same blinks, as does attempting to go into recovery mode.
All the threads I have gone to seem to assume that the phone can boot, or enter recovery mode or enter download mode. My phone can do neither.
I desperately need help.
Thanks in advance
ling_c said:
Hi guys,
I was running CloudyG3 2.5 on my D855. Today I wanted to go back to stock using LG Flash Tool with D85520h firmware file (lollipop) (in Windows 10). It got stuck at 4%. After waiting for close to an hour, I just unplgged the device. Now when I power it up, I get the secure boot error message and it starts blinking the notification LED (alternating red and blue). Going into download mode also brings up the same blinks, as does attempting to go into recovery mode.
All the threads I have gone to seem to assume that the phone can boot, or enter recovery mode or enter download mode. My phone can do neither.
I desperately need help.
Thanks in advance
Click to expand...
Click to collapse
you go to this page (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
i also same your problem but i ald fix that.
thurasisyein said:
you go to this page (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
i also same your problem but i ald fix that.
Click to expand...
Click to collapse
Thanks a lot mate. I used the willcracker tool attached in the OP of the thread and it worked like a charm. My phone could go into the Qualcomm HS-USB mode but one of the following factors could have been at play:
1. The BoardDiag tool I was used was fake (as mentioned in the thread you referred me to.
2. The PC I was working on has all ports as USB 3.0 (I'm not sure if that was issue or the fact that I had other devices connected-- just a mouse adaptor, but I could see my phone in Device Manager)
So, I went ahead and changed all of the above: used the newly-found BoardDiag (willcracker), on a another PC with a USB 2.0 port and made sure no other devices were connected.
My phone is now back to life!

not going to droidboot nor download mode (ASUS Fonepad 7 k012-fe170cg)

i am flashing my asus fonepad 7
"fastboot erase system "
suddenly my datacable was disconnected in the process
i rebooted the device
it was stuck on asus logo
i have no access to driodboot menu(the menu which i usally get by pressing volume up+power button)and stuck on asus logo
my device is not even going to download mode
Please help
Thank in advance
Mine too.. . Cant enter the Fastboot/Recovery mode..
Looking for all the available solution for that..
Sent from my 2014817 using Tapatalk
try try try to get in fastboot mode coz if you cant you are lost...
i've the same problem............ someone who help me??

Brick - Asus logo forever(no loop), no recovery, no fastboot, no connection ISoc driv

Hello everyone, I have Zenfone 2 this device bricked but how I don't remember.
Before I could fix it via xFSTK downloader but this time it couldn't connect
No vibration
No fastboot mode, no download mode opening
When I plug charge, it is charging well...
When I open the phone it try to open but stack on Asus Logo forever.
I tried step by step this: https://forum.xda-developers.com/zenfone2/help/thead-bricked-phone-updating-to-mm-tips-t3452785
but 1.2 Connect Zenfone with computer IntelSoc Mode: is false because Computer doesn't see my device, I tried different laptops but still same...
How can I fix this issue could you help me please?
Thank you

Help me ASUS ZENFONE 2 ZE500CL HARD BRICK

I'm practically a repair technician I got this asus zenfone ze500cl replaced lcd + battery but when I turn it on it remains fixed stuck with the asus logo tried to go into recovery mode and it doesn't even go in fastboot and fastmode mode can you do something?
I followed the guide step by step (https://forum.xda-developers.com/zenfone2/general/guide-bring-to-life-zenfone-2-ze500cl-t3503144) but as soon as I connect the phone to the PC it connects and disconnects immediately and on xfstk 5% freezes because it disconnects and no longer proceeds

Categories

Resources