Hi everybody:
I just bought one of Asus Zenfone 2 ZE551ML. In the second day
of use, electrical noise showed up on the screen, so I decided to wipe cache, since
then I can't boot up my device, it has blink sleeping android error.
I've already tried holding power button and pressing volume up button to go in
recovery mode but it doesn't work, I can't access to recovery mode.
On the other hand, I can access only to fastboot page.
Another problem is that my computer doesn't recognize my phone at all(I already
installed driver and ADB).
Please help me, I don't know how to solve the blinking sleeping android error.
I have the same problem has somebody here an easy solution or a easy description for a girl from germanny with no which big experience in technology
thank you guys
Jennygermanny said:
I have the same problem has somebody here an easy solution or a easy description for a girl from germanny with no which big experience in technology
thank you guys
Click to expand...
Click to collapse
Greetings Jenny:
¿The guide in http://forum.xda-developers.com/show....php?t=3191244 made by Mael_RadecFR worked for you?
jechav2 said:
Greetings Jenny:
¿The guide in http://forum.xda-developers.com/show....php?t=3191244 made by Mael_RadecFR worked for you?
Click to expand...
Click to collapse
Right link: http://forum.xda-developers.com/showthread.php?t=3191244
Related
my galaxy wonder shut down suddenly ,rebooting to the samsung logo screen only ,and it keep rebooting only to this screen.
I can't access cwm recovery.
I'm using One of a kind rom stable v32.
Is this a brick?!
Any help would be appreciated ASAP
btw i discovered that i can't access download mode too ,and connecting the phone to charger or pc brings it to death
Somor said:
my galaxy wonder shut down suddenly ,rebooting to the samsung logo screen only ,and it keep rebooting only to this screen.
I can't access cwm recovery.
I'm using One of a kind rom stable v32.
Is this a brick?!
Any help would be appreciated ASAP
btw i discovered that i can't access download mode too ,and connecting the phone to charger or pc brings it to death
Click to expand...
Click to collapse
now after searching rhe forums,this is a faulty power button,so I managed to boot it by (errr) abusing it.
now i want to disable the power button ,and find another way to reboot ,any help?
Somor said:
now after searching rhe forums,this is a faulty power button,so I managed to boot it by (errr) abusing it.
now i want to disable the power button ,and find another way to reboot ,any help?
Click to expand...
Click to collapse
If you install any rom Android 4.0+ you can install Xposed Framework + the module Xposed Additions to remap any buttons you like
LS.xD said:
If you install any rom Android 4.0+ you can install Xposed Framework + the module Xposed Additions to remap any buttons you like
Click to expand...
Click to collapse
Thumbs up ,dude:good:
I'm using one of a kind v32 ,but when i try to install xposed ,i get segmentation fault!
so i suppose it won't work on cm9,I wanna try another version but don't know what is suitable..
can you advise me?
I'm so grateful to your solution.
Somor said:
Thumbs up ,dude:good:
I'm using one of a kind v32 ,but when i try to install xposed ,i get segmentation fault!
so i suppose it won't work on cm9,I wanna try another version but don't know what is suitable..
can you advise me?
I'm so grateful to your solution.
Click to expand...
Click to collapse
Mokee should work stable. Its basd on CM11. --> LINK
Mate......get the button fixed.....there WILL come a time when you need it.....like if you have to use recovery.....remapping buttons and software modifications WILL NOT be of ANY use then.......
My wife says I'm a phone geek....She's probably right
keithross39 said:
Mate......get the button fixed.....there WILL come a time when you need it.....like if you have to use recovery.....remapping buttons and software modifications WILL NOT be of ANY use then.......
My wife says I'm a phone geek....She's probably right
Click to expand...
Click to collapse
what if I told you that everything especially electronics is ridiculously priced here in egypt ,and knowing from similar posts that they will change the mainboard ,they're gonna charge hell of a price that I'd probably buy a new phone!
Then I would say 'I feel your pain' lol.......
Things here in the UK ain't exactly cheap either.......
But I've done some research.....the home button assembly is separate to the motherboard and can be purchased separately. The only downside is that you have to completely disassemble the phone in order to replace it......
Here's a YouTube guide that might help.......
http://youtu.be/ZjcucJDzfmk
My wife says I'm a phone geek....She's probably right
I've a big problem... my phone won't turn on, won't charge (and no led) but is not totally dead.
The problem has happening after install TWRP with Autorec on V30B firmware, i reboot my phone and nothing... My phone won't reboot, just turn off.
Since, there is no vibration when i press start button, no DL mode when i connect to the PC (and hold volume up) but, sometimes i can see boot logo during 3 second and nothing anymore, just a black screen. When i remove the battery and i plug it, the phone shows me a logo which indicates the battery is removed.
I plug my phone during 10 minutes, but always nothing...
If someone can help me, i would be so gratefull
Used twrp for marshmallow or lollipop and your phone version is what?
Give this a try: http://open-freax.fr/guide-unbrick-your-lg-g3/
If that does not help I guess there is nothing you can do.
did you check that you have TWRP? Try to enter recovery since you can see the logo and you certainly flashed recovery. Main thing is that you flashed wrong boot and can not boot system.
Check this post from autoprime.
http://forum.xda-developers.com/showpost.php?p=64626209&postcount=529
Thank you very much for your help. Your link @two_handed was very helpfull
Silver Wx said:
Thank you very much for your help. Your link @two_handed was very helpfull
Click to expand...
Click to collapse
Have you been successful? It helped me with my Soft/Hardbrick.
two_handed said:
Have you been successful? It helped me with my Soft/Hardbrick.
Click to expand...
Click to collapse
Yes ! Tanks again
Silver Wx said:
Yes ! Tanks again
Click to expand...
Click to collapse
Does that method keep the internal memory files? pictures etc?
My g3 is fully bricked and i just want the files!
Ray1000 said:
Does that method keep the internal memory files? pictures etc?
My g3 is fully bricked and i just want the files!
Click to expand...
Click to collapse
Nope , internal memory will be erased..
Hi there. I tried to update my Elephone P8000 but to no avail – my phone stuck in a boot loop and I couldn’t use it at all.
I noticed it had happened to more people online so I tried one of their fixes of flashing the stock ROM...which didn’t work.
I have downloaded all drivers, followed every tutorial step by step but nothing! And now instead of being stuck in a boot loop my phone won’t turn on at all.
My PC still recognises the phone which I guess is good, except I still cannot flash the stock ROM.
It gets past the red bar and the purple bar but then gets stuck at Download Flash 0%
Is there anything else I could possibly try as I’m all out of ideas and I really love this phone!
Thank you!
Try again using this http://forum.xda-developers.com/elephone-p8000/help/how-to-guideline-install-mtk-drivers-t3334698
It is just the same exact thing that happened to me. I would thank any help.
oldbeardedman said:
It is just the same exact thing that happened to me. I would thank any help.
Click to expand...
Click to collapse
Your going to need to flash a Rom to fix it. Follow steps in the guide I linked above to flash.
Updates will brick these phones if they are rooted.
thundermuppet said:
Your going to need to flash a Rom to fix it. Follow steps in the guide I linked above to flash.
Updates will brick these phones if they are rooted.
Click to expand...
Click to collapse
Yep I have tried that several times before but my laptop won't even restart in advanced mode. I know it is weird but...
I even tried to make the whole process in a virtual so without results.
What windows are you running?
thundermuppet said:
What windows are you running?
Click to expand...
Click to collapse
Windows 10. When I try to reboot into advanced mode it shuts down normally but then it freezes in a black screen doing nothing.
oldbeardedman said:
Windows 10. When I try to reboot into advanced mode it shuts down normally but then it freezes in a black screen doing nothing.
Click to expand...
Click to collapse
Try pressing the 7 key and see if anything happens. If it's still the same search Google for problem, I'm sure someone had had same problem as well.
Don't worry about phone, I've bricked many and have always fixed them.
thundermuppet said:
Try pressing the 7 key and see if anything happens. If it's still the same search Google for problem, I'm sure someone had had same problem as well.
Don't worry about phone, I've bricked many and have always fixed them.
Click to expand...
Click to collapse
7 or F7? Yes I have searched and tried to disable the driver signature policy through command too as I have seen in other pages but it did not work. I think I will have to borrow a friend's PC.
Thank you anyway. I am still worried tough haha
oldbeardedman said:
7 or F7? Yes I have searched and tried to disable the driver signature policy through command too as I have seen in other pages but it did not work. I think I will have to borrow a friend's PC.
Thank you anyway. I am still worried tough haha
Click to expand...
Click to collapse
The number 7 key. If you're using keypad and numlock is off you will be pressing curser left. If you're using a laptop with a monitor attached to it the monitor will be black and the display will be on the laptop screen.
Other methods, try here http://pcsupport.about.com/od/windows-8/a/open-advanced-startup-options-windows-8.htm
Posting in case someone has the same problems as me.
I finally could do it with flashtool and some generic drivers I found here:
http://www.mediafire.com/download/5ff6s5bk1couva9/Compelte+USB+Drivers+PDanet+Adb+Installer.rar
These drivers are signed, so I could install them without issues.
I have installed a custom recovery and a custom rom (nexus).
However, thank you very much, thundermuppet.
So I broke my screen kept it lying around for 24 months then finally got it fixed this week
After replacement my power button doesn't wake up the screen at once
prolly press 20 times before it wakes up
The capacitive buttons light up on each press and even vibrates with fingerprint but screen stays off
It works fine in twrp lock screen. Locks and wakes up properly there.
The repair guy said that it's a software problem so he'll software reset it for for me I send it back
just clean flash havoc os latest but still the same problem
DrDarthZ said:
So I broke my screen kept it lying around for 24 months then finally got it fixed this week
After replacement my power button doesn't wake up the screen at once
prolly press 20 times before it wakes up
The capacitive buttons light up on each press and even vibrates with fingerprint but screen stays off
It works fine in twrp lock screen. Locks and wakes up properly there.
The repair guy said that it's a software problem so he'll software reset it for for me I send it back
just clean flash havoc os latest but still the same problem
Click to expand...
Click to collapse
you have to flash caesium kernel as he probably replaced screen with cheap version not real one,so flash this https://github.com/msfjarvis/oneplus3/releases/tag/CalumniousCarambola its the top one if on pie rom and u will be good
thanks that worked, but why does only this kernel work ?
ireaper4592 said:
you have to flash caesium kernel as he probably replaced screen with cheap version not real one,so flash this https://github.com/msfjarvis/oneplus3/releases/tag/CalumniousCarambola its the top one if on pie rom and u will be good
Click to expand...
Click to collapse
Can I install this kernel on latest OOS?
Hey guys
My ONEPLUS 3 display got broke down.
So I went for a display replacement in service centre.
For which they charged me 7500/- ₹
But after replacement.. the phone is crashig a lot.
I need to press power button end number of times & still the phone won't respond.
I don't know why this is happening.
Can someone suggest a solution?
Currently the device is on - Oxygen OS 9.0.5 (non-rooted)
Please help! ?
please try and unbrick your device by downloading this tool https://androidfilehost.com/?fid=6006931924117936392 then run msm download tool as administrator
kallum7 said:
please try and unbrick your device by downloading this tool https://androidfilehost.com/?fid=6006931924117936392 then run msm download tool as administrator
Click to expand...
Click to collapse
will this wipe device internal storage??
Lucifer213_ said:
will this wipe device internal storage??
Click to expand...
Click to collapse
yes
kallum7 said:
yes
Click to expand...
Click to collapse
what about caseium kernel?
someome told me to install it..but im not sure if it supports oxygen os latest build.
Lucifer213_ said:
what about caseium kernel?
someome told me to install it..but im not sure if it supports oxygen os latest build.
Click to expand...
Click to collapse
nope because the system drivers are corrupt so it needs to be reset by unbricking the device
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Lucifer213_ said:
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Click to expand...
Click to collapse
Firstly download the unbrick tool I have sent you through the link then switch off your phone and make sure cable is unplugged then hold the volume up button on your phone and then plug in the USB cable to the computer and phone then on your computer and open device manager and make sure under ports it says Qualcomm 9 and then extract the unbrick tool then run mam as admin then click start
Lucifer213_ said:
ok thanks, but can u explain me the steps , cause i don't exactly know how to unbrick. Cause I've never done so.
I don't want anything wrong to happen.
Click to expand...
Click to collapse
This has a collection of unbrick tools and versions of OOS.
This contains detailed instructions also.
Hope you solve your problem.
If not and you still have warranty for the display (OnePlus gives atleast 3 months warranty on replacement), take the phone to the Service Center. In fact, if you have warranty, that should be the first option.
Thanks for the response.
But I don't think my device is bricked, cause the phone is on working mode, but it's just that whenever I lock my phone.. It does not gets unlock on the first attempt. I need to press the unlock/power button end number of times & the phone still don't responds. It gets crashed and the System UI error occurs & asks for force stop & the phone is lagging a lot. I can't even use it properly.
I would still recommend doing it
have you got it sorted
kallum7 said:
have you got it sorted
Click to expand...
Click to collapse
I'll do it today/tomorrow
& Share the details.
kallum7 said:
have you got it sorted
Click to expand...
Click to collapse
I completed the process.
But it's still happening.
Not that much. But it is happening every 5th time I try to unlock my phone.
By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired
kallum7 said:
By this point you have two options get another device or get your op3 and take it to a OnePlus service center and get it repaired
Click to expand...
Click to collapse
OnePlus service is worse.
I guess I need to purchase a new smartphone then, or find some other solution.
Hi,,
I have a rooted red magic 5 International version that I am trying to update it, since I am new to this stuff I tried one of videos that led me to a black screen. I tried to charge, press power and volume buttons and there is no response. so please if any one can help me or suggesting anything to do will make me glad.
Thanks
RedMagic999 said:
Hi,,
I have a rooted red magic 5 International version that I am trying to update it, since I am new to this stuff I tried one of videos that led me to a black screen. I tried to charge, press power and volume buttons and there is no response. so please if any one can help me or suggesting anything to do will make me glad.
Thanks
Click to expand...
Click to collapse
I need help too.
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device then unbrick.
zayidhs said:
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device then unbrick.
Click to expand...
Click to collapse
I did try all the Unbricked tools from XDA. Nothing work. Seems like when it start flashing it disconnect the phone.
Salor123 said:
I did try all the Unbricked tools from XDA. Nothing work. Seems like when it start flashing it disconnect the phone.
Click to expand...
Click to collapse
Its mean?y device
zayidhs said:
You both have bricked your devices.
Please, if you haven't perfected customization, don't do anything you see online.
Go to this and download the unbrick tool for your device t
Click to expand...
Click to collapse
Its mean my devuce us aldo briked coz of my prblm as like same i was also try to local update i just copy and paste zip other directry and install to update then my device is shutdown i hv try many time to turn on but no response
" i just want to knw its possible to fix or not..