Develop Bugs

Installing Debian Squeeze on Android Optimus - Walkthrough

Installing Debian Squeeze on Android Optimus S - Walk-throughs
This is slowly becoming a larger topic. So for now i will post various ways proven to work on the Optimus S and V as links below:
Installing Debian Squeeze on Android Optimus - Walk-through Compiled by uamadman
Install Debian Squeeze - non-loop sd-ext chroot method (prebuilt!) By bigsupersquid
ALL-Thumbs GUI to replace LXDE By bigsupersquid
4 Steps to Linux on your Optimus S - written by uamadman hosted by uamadman

All of this work was done by other people. I am simply compiling information and specializing it to the Optimus S.
This method does not require a pc, and everything is done through your android interface.
Current Abilities I've tested with success.
Play Sound
Surf the web
Access entire SD Card
Currently Working on:
Flash Support through IceWeasel
Completed:
Making this a simple download and phone restore - Done
Needs:
A GUI with bigger buttons and scaled for 480x320 - Done thanks bigsupersquid
Transparent Keyboard
Sources:
Howto Install Ubuntu by NexusOneHacks.net
secret hidden note to self psychocats.net/ubuntu/nonfree
Lets begin.
You need the following requirements:
Recommended: 2+ gigabytes of free SD card Space (Minimum 1.25gb)
A Rooted Optimus S
Kernel/Recovery: Xionia CWMA v1.2518.6
ROM:The Scott Pilgrim ROM (CM7 Gingerbread, Zefie Edition)
BusyBox Installer - You can get this from google apps store by JRummy16
Linux Installer – You can get this from google apps store by Galoula
Items worth having to things that make this easier:
A Wifi Internet Connection
A fully Charged Battery and a Wall Charger ^.^
2 Bottles of Mountian Dew
Your favorite Movie
and
The Patience to NOT Touch/use your phone for the 2 hours needed to complete the initial install process.
I started this endeavor with a clean install of the ROM listed above.
!!Make backups if you MUST save your data before you proceed any further!!
Warning: In The Simplest Terms(More detail will be in the final walkthrough)
Sometimes the Linux Installer doesn't work or if it is working and the process is interrupted while creating the .LOOP or extracting the build. The Linux Installer will stop working. I've found two (2) ways to fix the issues. The first is to go into setting and clear the cache for Linux Installer, Then open the superuser app and forget the permissions assigned to Linux Installer (Note: Try this a few times before resorting to a clean wipe, this method sometimes takes a few tries). The second is a clean wipe/recovery of the phone. Additionally if for some reason there is a interruption and the process stops. reboot the phone delete linux.loop off your sdcard and start from scratch. BEWARNED
*Walk-through - Under Construction*
To clarify any confusion the button names I use from left to right:
Home : Menu : Back : Search
Pre-Install Check List for Formatting/Reloading Rom
install sdcard with ROM/Recovery's
Reboot > Recovery
wipe data/factory reset
mounts and storage> format system
install zip from sdcard >choose zip from sdcard > update-cm-7-04282011-NIGHTLY
install zip from sdcard >choose zip from sdcard > gapps-gb-20110120
Remove sdcard with ROMS
Install sdcard marked for Linux
mounts and storage > format sdcard
reboot system now
Pre-install Checklist phone prep. (If you choose to overclock your phone this would be a great time to do it)
Wait 2 minutes for phone to fully load
tap droid
tap skip
tap next/done
Settings > Display > Screen timeout > 30 minutes
Settings > Applications > Check Unknown sources (not sure if nessesary)
Settings > Applications > Development > Check Stay awake (Required!!!!)
Settings > Accounts & Sync > Add Account (Go Through Menu's should take you though Market Install)
Market > Search Busy Box > tap BusyBox Installer by JRummy16 > free > ok
Market > Search Linux Installer > tap Linux Installer by Galoula > free > ok
Market > Search vnc > tap android-vnc-viewer Installer by androidVNC team + antlersoft > free > ok
Press Home Key
Apps> Busybox Installer >Allow Permissions> OK > Install
Install Check List
Warning
DO NOT ROTATE YOUR PHONE
ALLOW THE SCREEN TO SHUT OFF
LOCK THE PHONE
WHILE THIS APP IS OPEN UNLESS STATED
(you will see bad things if you do)
For Debian
Apps > Linux Installer > Allow SU Permissions > Allow SU Permissions > Allow SU Permissions > Click OK (First time start up, Yes 3 Approvals. If you don't recieve 3 notifications from super user it means Linux Installer is bugged. Go Settings>Applications>Manage Applications> under the Downloaded tab find Linux Installer > Select > Clear Data > Try step again. May take a few tries.)
Press Menu Key > Tap Setup > Tap File Size > Set to 1250 or more but must be less than the size of your SD Card.> ok > Press The Back Key (Linux installer will exit to your apps menu)
For Ubuntu - Currently bugged. I would avoid this. The source.list seems to have issues and won't download packages.
REQUIRED: Set you phone some where flat plugged into power Do Not Let The Screen Rotate!!!!!Apps>Linux Installer > Tap 1) Create target loop
Be Patient Wait until the Creating LOOP menu disappears. The length of time is dependent on the size of Megabytes set in the File Size option. About 10 minutes for 1500 Mb
Tap Liberate Loop -- Really Fast
Tap Format target loop (ext2) - This is the Buggy Part. If you get an Error message everything is most likely ok. Pickup your phone and Physically Rotate it so the screen rotates. Two additional menu's should appear. [3) Copy and Extract into loop and Install Linux Boot Script]
Lay your phone back down flat it doesn't matter if the screen rotates back to its original.
From here on DO NOT let the Screen Rotate Again! The process will be interrupted and you will get to start from step 1
Tap 3) Copy and Extract into Loop (it will start downloading and extracting the packages necessary to install Linux) This can take up to an hour. On a good 3g connection less than 45minutes.
Tap 4) Install into loop (This takes less than 10 minutes)
Tap Install Linux boot script
30 Seconds Later you officially have a version of Linux installed on your phone
CONGRATS
Verify Install Works
Apps > Terminal Emulator > Type: su > Enter > Grant Permissions > Type: linuxboot > Enter
You should get a string of code then get something like:
[email protected]:/
Most of the next portion comes from the Nexusonehecks.net
Setting up VNC and LXDE (so you don't have to look at terminal lines all day)
Apps > Terminal Emulator > Type: linuxboot > Enter <---If your not already in already.
Type > apt-get update > enter --- 5 minutes
Tight VNC Server
Type > apt-get install tightvncserver > Type y > Press enter --10 minutes
LXDE
Type > apt-get install lxde > type y > Press enter - 30 Minutes+
After a while you should get this screen
Press Menu > Preferences > Control key > Choose Camera Key > Back key > Back Key
Fully Depress the Camera Button Down and Tap the number 9 on the soft key board > Release Camera key > Tap Space Bar -- now two times more
Fully Depress the Camera Button Down and Tap the number 9 on the soft key board > Release Camera key > Tap Space Bar
Fully Depress the Camera Button Down and Tap the number 9 on the soft key board > Release Camera key > Tap Space Bar
The process should continue installing LXDE
tightvncserver Setup
Type> export USER=root > enter
Type> vncserver -geometry 1024x800 > enter
enter password > enter (use something simple you can remember i used 123123123 like they did on the nexusonehacks.net writeup)
verify password > enter
Press Enter after typing each line of the following code. Be Very Slow and Deliberate. Double Check Each line for Capitalization and accuracy before pressing Enter! I do not know how to edit this again --hidden note-->Perhaps some one can show me/tell me how
cat > /root/.vnc/xtartup
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
icewm &
lxsession
Now Press and Hold the Camera Key and Tap D twice on the soft keyboard > Press Enter (it may ask to press 1 do not and only press enter)
If your camera key wasn't set look here to set it again--->Press Menu > Preferences > Control key > Choose Camera Key > Back key > Back Key
Setting up VNC on android ... After all those command lines I'm sure this is a very very nice change xD
Press Home Screen
Apps > androidVNCviewer > For Password enter 123123123 (Or whatever you set it to in the previous server setup)
Scroll to Port and enter 5901
Change the Color Format if you wish. It runs rather nicely on 24bit color but consumes more cpu cycles.
Tap Connect -- A Very Pretty LXDE should appear with a working CPU Monitor and everything nice
I know you want to play but we have a little more work to do this next step uses Terminal Emulator as the auto start/config file to boot linux and start and configure tightvncserver
Press Home
Open Termial > Menu Key > Preferences > Initial Command > Tap to Edit
Make Edit look like this
export PATH=/data/local/bin:$PATH
linuxboot
vncserver -geometry 600x480
Tap OK > Back out of Teminal to home
vncserver -geometry 600x480<--- this is where you change your screen size. you need a minimum of 600x480 to use the synaptic package manager and a few other things. but when i'm surfing the net or other things I prefer 480x320 (The Exact Size of the Optimus S Screen)
Now whenever you want to run linux simply open the Terminal Emulator. Wait 60 seconds for the code to run.
open androidVNCviewer and click Connect
DONE
Extra things go here
apt-get install synaptic - installs synaptic manager a nice GUI interface for the apt-get command

I have been running a Debian chroot on my optimus V for a few months now, squeeze and sid both work fine. I did it manually without the stuff from the market, and I use the sd-ext partition instead of a loop file
per your GUI issues:
I like xfce4 better than lxde on my optimus V.
Code:
apt-get install xfce4 xfce4-goodies
instead of lxde.
oh, also, the OP pointed out to me that
Code:
apt-get install xfce4-goodies
alone will also pull down xfce4 as a dependency (and that I left out the word install which is now corrected.)
modify the /root/.vnc/xstartup accordingly.
replace
Code:
icewm&
lxsession
with
Code:
xfce4-session&
or, you can cut-and paste my complete file here:
Code:
echo "#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
export XKL_XMODMAP_DISABLE=1
xfce4-session&" > /root/.vnc/xstartup
I have modified a theme for xfce to be more finger-friendly.
see attachment
decompress that file, it contains a folder, Xfce_large.
place the folder in /usr/share/themes
tap on the rat in the lower-left of the desktop (opens menu)
select Settings by tapping its arrow (xfce is twitchy about the menu through the VNC, it may take a few tries to select items on the main menu.)
select Appearance. Then Style.
Scroll down to Xfce_large and tap it, then tap Close at the bottom.
Voila, oversized scrollbars and menu bar buttons!
If you don't like the size, the settings I modified are in the gtk-2.0 subfolder of Xfce_large in the file gtkrc
the modified settings are not tabbed over like the rest of the settings in the file.
I also changed the default font size, icon size, icon font size, and DPI settings, but that has to be done in the settings menus.
The optimus display is about 120 DPI, the default is 75. 120 looks much nicer I think.

You are awesome

good luck with flash. gnash only plays ads on my V, not whole videos.
get-flash-videos from google code works nicely, but it's a capture utility.
it does try to play with mplayer, but only shows a couple of frames per few seconds because the VNC display method of manually copying the framebuffer is very slow.
using a bandwidth meter (debian package cbm to be exact) the vnc uses from 14 to 80Kb per second of system bandwith on device l0.
I don't know what's pegging your CPU use, mine only tops out when the debian system is doing something. I built my chroot with debootstrap instead of using the market installer, no telling what is preinstalled on the image it downloads.

I am going to try this out once i'm finished trying to get the ubuntu side of the house working.
Can I append this to my post here and androidcentral with proper credits due to you so all may share?

uamadman said:
...Can I append this to my post here and androidcentral with proper credits due to you so all may share?
Click to expand...
Click to collapse
certainly. just test the instructions for functionality before adding them in.
I considered starting a thread on this myself but never got around to it.
I'll continue to contribute info as this develops.
as an extra, here's a link I've posted, a few places on both forums, with a clean debootstrapped debian filesystem, tarred up to shrink it for download.
I goofed a bit when compressing it though, when decompressed it's a single folder containing the filesystem.
http://www.4shared.com/file/iWuUtZgS/squeeze_05_2011tar.html
uncompressed, 9645 items, totalling 264.3 MB
compressed, 116.3 MB (121929580 Bytes)
this will either need the contents of the freshsqueeze folder it contains copied to an ext2 (or ext3/ext4 if you want to brave the damage from journalling on a SD card, which seemed to cause corruption when I tried ext4) partition on your SD card, or, copied into a blank loop ext filesystem if you prefer.
with an empty debian img file mounted as a loop filesystem on a linux box, you can copy everything from the freshsqueeze folder to the loop filesystem by:
Code:
cp -av /path/to/freshsqueeze/* /path/to/loopmountedimg
the loop filesystem method should allow you to continue using your startup scripts as-is, they'll need slight modifications to work with an ext partition like I'm using.
its resolv.conf and sources.list are already configured for 3g access and the main Debian repository, so it's pretty much plug-n-play. no extra packages are installed, you'll need to apt-get tightvncserver and a window manager of your choice, unless you just want the bash shell.
the first time you chroot in, you should use passwd to set a root password, and adduser to get a non-root account on there.
this is not a loop filesystem like what you are using. it is a full directory tree of a base squeeze install.

I would like to see this on the V.its my only phone right now.if I had 2 I would try it.
Sent from my BumbleV using XDA Premium App.

ummkiper said:
I would like to see this on the V.its my only phone right now.if I had 2 I would try it.
Sent from my BumbleV using XDA Premium App.
Click to expand...
Click to collapse
I don't think a chroot can hurt your phone. I even run mine bind-mounted into the root filesystem, with system r/w, and haven't ever had any problems a reboot didn't solve. and it's been since April since I had a forced reboot from running stuff in debian.
now, I don't know about the installer from the market, if it asks for root access multiple times, I'm not sure just what it's doing. I'll post my sd-ext startup script and instructions for using it here after dinner if you want to try it that way instead of with the installer app.
honestly, it's a much simpler process than the OP, but, hey, if it works, I'm not one to dismiss the method out-of-hand.

bigsupersquid said:
I don't think a chroot can hurt your phone. I even run mine bind-mounted into the root filesystem, with system r/w, and haven't ever had any problems a reboot didn't solve. and it's been since April since I had a forced reboot from running stuff in debian.
now, I don't know about the installer from the market, if it asks for root access multiple times, I'm not sure just what it's doing. I'll post my sd-ext startup script and instructions for using it here after dinner if you want to try it that way instead of with the installer app.
honestly, it's a much simpler process than the OP, but, hey, if it works, I'm not one to dismiss the method out-of-hand.
Click to expand...
Click to collapse
Sounds good to me.

non-loop sd-ext chroot method (prebuilt!)
Standard disclaimer:
These scripts and chroot method may bork up your phone, trash your userdata, destroy system files, get you slapped by your mother, make your phone catch fire and/or explode, and etc., ad nauseum.
Use at your own risk.
MAKE A NANDROID BACKUP BEFORE DOING THIS!
You'll probably be just fine, but it's nice to have a backup in case something goes haywire.
Disclaimer aside, it's worked great for me since March, hasn't crashed for months, and I use it multiple times per day.
My main inspiration was Saurik and his Debian & Android together on G1.
I'm sorry that I can't point to all the many, many sources I read through over the couple weeks it took me to get this set up, I took little bits from here, there, and everywhere, but Saurik's work was the main core of this system.
Apologies if you see some tidbit of your work in this... let me know and I'll be happy to give you credit.
Dysfunctions:
things that don't work while the chroot is running:
wifi hotspot in aospCmod and Bumblebee won't initialize; does work during chroot in aospCmod if turned on before chroot, though.
network info II app won't start during chroot; if opened before chroot it's fine.
ringtones on SDcard don't work in Bumblebee; but OI File Manager can read the sdcard during chroot.
these things still work ok once the chroot is exited on aospCmod. The chroot borks wifi on Bumblebee until reboot.
Click to expand...
Click to collapse
Info:
This script remounts / and /system both read/write and leaves them that way until you type exit in the bash shell of the chroot. Without r/w mounting of the / directory, installing Debian packages gives some errors, since it's running in the real root filesystem. Also, the / directory is wiped out on a reboot, so it's relatively safe to have mounted r/w. /system doesn't need to be r/w, I just like it that way, and I haven't had trouble with it since I was first experimenting with this. Feel free to modify the 'boot' script if having /system mounted r/w makes you nervous.
This has been tested on Zefie'sCM7 (outdated) and aospCmodOV ROMs.
It also worked on Bumblebee, but not as effectively.
The chroot will not stop Android from functioning. If Debian is busy with something, it will slow Android down, though.
You will still get/can make phone calls, text messages, etc. You can send the VNC viewer to the background and use Android apps while the Debian system is in the background.
Click to expand...
Click to collapse
On to the meat of the matter. I'm using an 8Gb SD card. I advise no smaller than 4Gb unless you just want to do command-line work in Debian and don't need a GUI.
First, these instructions require a Linux pc. On M$ Windoze? Use a Live CD or a virtual box, or you're on your own.
The first part of these instructions is to be completed on your pc. I'll let you know when to switch to the phone.
1) Mount your <empty> SD card on the pc. If it's not empty, back it up, because this will wipe it out. You'll need at least two partitions on it, three if you're using something like apps2sd (which I'm not using, and not really familiar with, so this tutorial is set up assuming you don't need to dodge an existing ext partition,) and another if you have a swap-enabled kernel and want to use it.
2) Use Gparted or a similar tool to partition the SD card. First partition FAT32 for Android, whatever size you feel you need. I'm using 1Gb.
Second partition is an ext2, ext3, or ext4 partition. Apps2SD style, you know what size and filesystem type you need here, I don't. For Debian on the 2nd partition, I advise 3Gb or more, ext2. ext4 corrupted my files, so I switched back to ext2. If you need an apps2sd partition, Debian will go on the 3rd partition, and you'll have to modify the two attached scripts accordingly.
If you're lucky enough to have a swap-enabled kernel, you can make a swap partition; it'll go last, whatever size is left. 256Mb-1Gb should be plenty depending on whether you use image processing or large compiling projects or some other memory hogging programs.
3) Mount the sd FAT32 and Debian ext partitions on the pc.
4) Download to your pc the base Debian Squeeze filesystem which I've debootstrapped, configured, and uploaded for you to save hours of hassle.
Also download to the same directory the two attached script files.
boot.txt
firstrun.txt
5) Open a ROOT shell. You need root privleges to untar the filesystem and retain its permissions. If you don't have a root shell, put sudo in front of the tar and cp-av commands.
6) cd to the directory you downloaded the squeeze_05_2011.tar.gz into. then type
Code:
tar -zxvf squeeze_05_2011.tar.gz
cp -av ./freshsqueeze/* /full/path/to/sdextDebianpartition
sync
and wait for it to finish.
7) type
Code:
cp ./boot.txt /full/path/to/sdFAT32partition/boot
cp ./firstrun.txt /full/path/to/sdFAT32partition/firstrun
sync
8) Now is the time to copy back the stuff you backed up from the SD card to the FAT32 partition, and any apps2sd style stuff if you have it. Then unmount your SD card and put it in the phone.
Now all remaining steps are done on your Optimus. You're finished with the desktop pc.
9) Open a terminal on your Optimus. I like SL4A, but Terminal Emulator works well too. Both are free.
10) Next step merges your existing Android system files into the Debian partition. This is neccesary because I haven't compiled a kernel and don't know of one for the Optimus with UFS enabled. So, Debian gets bind-mounted over the Android rootfs ( / directory) and having the Android system files accessible in the Debian filesystem is required to keep them playing nicely together, while protecting the original Android files from Debian at the same time.
Code:
sh /sdcard/firstrun
You won't need this script ever again unless you change ROMs and/or need to reinstall Debian. Changing ROMS without reinstalling a fresh copy of Debian may mess things up a bit since system files vary between ROMs and you'll still have the Android files from your previous ROM in your Debian filesystem.
This script and the 'boot' script are both listed at the bottom of this post if you want to read 'em.
11) Next, remount system r/w, copy the 'boot' file to /system/xbin and chmod 4755 /system/xbin/boot. If scripts are in /system/xbin and executable, you can run them with 'su -c'
Code:
su
mount -o remount,rw /system /system
cp /sdcard/boot /system/xbin
chmod 4755 /system/xbin/boot
mount -o remount,ro /system /system
OK, a basic Debian filesystem with no extra packages is now installed!
my Debian filesystem is on my 2nd sdcard partition. The comments in the 'boot' script should explain how to use another partition if you have apps2sd running or somesuch (I don't have many Android apps on my phone so don't need/use apps2sd function)
to use the script as-is, your linux flavor should be in the 2nd card partition. I use Debian, but any Debian-based distro should work, for example Ubuntu or DSL.
open a terminal and type
Code:
su -c boot
don't kill the terminal app... leave it running in the background.
when you're finished with linux, reopen the same terminal and type
Code:
exit
to cleanly dismount your linux. No reboot required!
Before you exit the first run of your new Debian system, you should download some packages. I advise tightvncserver, xfce4 (and xfce4-goodies if you want the extra glitz like a cpu monitor, bandwidth monitor, and such, without hunting the individual packages) and iceweasel so you can have a real rebranded firefox on your Optimus.
Code:
apt-get update
apt-get install tightvncserver xfce4 xfce4-goodies iceweasel
It'll take a while to download all that. Lots of data.
Once it's done downloading, configure tightvncserver.
Code:
vncserver
It'll ask you for a password. Choose one that's easy to remember. You'll need to enter it in the VNC viewer as well (next step)
IMPORTANT!
tightvncserver will ask you if you want a view-only password. Tell it no!
next:
Code:
vncserver -kill :1
to politely exit the vncserver. Otherwise you'll have to exit the chroot, reboot the phone, and run the 'boot' script again or it'll open server :2, :3, and so on each time you type vncserver. Each instance will eat more CPU, RAM, etc.
configure /root/.vnc/xstartup
Code:
echo '#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
export XKL_XMODMAP_DISABLE=1
xfce4-session&' > /root/.vnc/xstartup
after that,
you should use
Code:
passwd
to set a root password, and
Code:
adduser
to get a non-root account on there.
Code:
exit
will close the chroot. You can close the terminal after that until you're finished setting up the VNCviewer and want to start your lovely GUI.
Now, set up the VNC viewer like in the OP. Make sure your password matches the one you gave tightvncserver!
I advise 24 bit color. It slows things down ever so slightly, but to me, it's well worth the increase in eye candy you get over 8 bit.
most of the tutorials on the VNC suggest modifying the /root/.bashrc file to start the vncserver automatically (like here on xda) but I don't like that myself. I use the shell a lot, and the vncserver eats system resources. So, I manually start and stop the vncserver from the command line.
Code:
vncserver
to start, it defaults to a 1024x768 which seems to make programs happier than the 480x320 phone native resolution.
Code:
vncserver -kill :1
to stop it politely. Otherwise a phone reboot is required to get rid of vncserver files (by clearing out everything in the / directory which isn't replaced by the boot.img ramdisk) which make it open desktop :2, :3, and so on each time you run the program.
One major advantage to the bind-mounting in the rootfs is that Thunar works as a root explorer, and has access to the entire Android filesystem (except for the bind-mounted Debian directories, which hide the Android directories underneath, including /system/etc which is symlinked to /etc by the boot.img ramdisk,) as well as the complete Debian filesystem.
Pretty much everything I've tried works, unless it wants speed from the display. The VNC just slows that down way to much to use for video or games or suchlike. I'm working on native window support for X, but I need more practice in C to get it done.
Iceweasel works great, if a little slow, a rebranded full firefox on an ARMv6 device that mozilla won't release an apk for its wussy mobile version on. Go figure. The biggest problem is finding plugins compiled for ARM, the 'get plugin' button send you to sites offering x386 versions of the plugins. Yuk.
Icedtea open source java works fine.
Gnash plays ads but not videos.
Gimp works well.
Qemu works!
Eclipse even installs and runs (very slowly)
get-flash-videos captures flash exceptionally well. combined with an Android video player for .mp4 files, you can download and watch flash from lots of places, just not streaming.
alsa audio works through Iceweasel. Played audio clips from yodajeff.com just to test it.
3g works great.
Wifi detects the connection with iwconfig, I haven't tried sending data through it but the way 3g plugs right in I bet that wifi works equally well.
Since wifi and 3g work out of the box, I bet bluetooth would too with some config, but it needs extra packages to see the functionality.
The network meter plugin for xfce works. The device is rmnet0.
The cpu meter plugin also works.
At one point I had the battery meter from xfce-power-manager working but my last install broke it somehow. Ah, well.
once it's all together
open a terminal
to start it up:
Code:
su -c boot
for a gui,
Code:
vncserver
to kill the GUI,
Code:
vncserver -kill :1
to exit the chroot,
Code:
exit
the first time you run the GUI, you might want to add my Xfce_large theme to make the scrollbars and menubars easier to hit on the touchscreen. See the earlier post.
hopefully this helps people out. I spent quite a while getting it just how I wanted it, many googlings and picking bits from here and there.
contents of the scripts follow.
firstrun
Code:
#make /sd-ext directory if it doesn't exist
if [ ! -d /sd-ext ]
then
mkdir /sd-ext
fi
# mount 2nd sdcard partition
# if your linux is on a different partition than 2, substitute that number for the 2 in .../mmcblk0p2 below
# first unmount it; if not already mounted, system will echo 'umount: can't forcibly umount /dev/block/mmcblk0p2: Invalid argument' but this isn't an error to worry about
umount -l /dev/block/mmcblk0p2
mount -o noatime,exec,suid /dev/block/mmcblk0p2 /sd-ext
#copy files from Android to Debian without overwriting anything
yes n | cp -aiv /etc/* /sd-ext/etc
yes n | cp -aiv /root/* /sd-ext/root
yes n | cp -aiv /sbin/* /sd-ext/sbin
yes n | cp -aiv /sys/* /sd-ext/sys
boot
Code:
# debian lives here
export mnt=/sd-ext
# remount / and /system rw
mount -o remount,rw / /
mount -o remount,rw /system /system
# make new subdirectories in / for binding
for x in \
bin boot home lib media \
opt selinux tmp usr var
do
mkdir /$x
done
#make $mnt directory if it doesn't exist
if [ ! -d $mnt ]
then
mkdir $mnt
fi
# mount 2nd sdcard partition
# if your linux is on a different partition than 2, substitute that number for the 2 in .../mmcblk0p2 below
# first unmount it; if not already mounted, system will echo 'umount: can't forcibly umount /dev/block/mmcblk0p2: Invalid argument' but this isn't an error to worry about
umount -l /dev/block/mmcblk0p2
mount -o noatime,exec,suid /dev/block/mmcblk0p2 $mnt
# cleanup last session's tmp files, including last VNC session
rm -r -f $mnt/tmp
mkdir $mnt/tmp
# bind mount debian directories to /
for x in \
bin boot home lib media \
opt selinux tmp usr var \
etc root sbin
do
mount --bind $mnt/$x /$x
done
# set some system variables
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/etc:/sys:$PATH
export TERM=linux
export USER=root
export HOME=/root
# mount proc,sys,devpts
umount -l devpts
mount -o remount -t proc proc /proc
mount -o remount -t sysfs sysfs /sys
mount -t devpts devpts /dev/pts
# softlink framebuffer (for future use,) and existing mounts
ln -s /dev/graphics/fb0 /dev/fb0
cat /proc/mounts > /etc/fstab
cat /proc/mounts > /etc/mtab
# 'boot' with chroot into debian bash shell at /
chroot / /bin/bash
# done now, clean up after exit to keep Android happy
# remove softlinks and replace backed up mtab and fstab
rm /dev/fb0
cd /
# unmount subdirectories
for x in \
bin boot home lib media \
opt selinux tmp usr var \
etc root sbin
do
umount -l /$x
done
# remove non-Android subdirectories
for x in \
bin boot home lib media \
opt selinux tmp usr var
do
rmdir /$x
done
# remount / and /system ro
mount -o remount,ro / /
mount -o remount,ro /system /system

That is an excellent write up. Link added to first post.

appreciate the compliment.
it took two hours to type up and another two to redo it all after firefox crashed on my pc right as I was finishing.
if anyone notices issues or errors in it, let me know and I'll try to fix 'em.
I'll try to help out if anyone has problems getting it working, odds are I missed some detail or typo.

well it took me all day to install ubuntu on this pc to find out it was my video card so im using the built in video on the mb and it worked.I will be doing this tomorrow as its 2am here now.ive never had a problem installing ubuntu before lol.the live cd would just freeze no matter which flavor of linux i used.

ummkiper said:
well it took me all day to install ubuntu on this pc to find out it was my video card so im using the built in video on the mb and it worked.I will be doing this tomorrow as its 2am here now.ive never had a problem installing ubuntu before lol.the live cd would just freeze no matter which flavor of linux i used.
Click to expand...
Click to collapse
eek.
I don't really like ubuntu much, it reminds me too much of Windoze, all bloated up and running a bunch of stuff I never told it to
but I put it on after reading dev reccomendations to use it when making the final switch from windoze, and now I only use it for watching dvds and the stupid digital tv the broadcasters switched to a while back to obsolete everyone's receivers (use an hvr950 usb tuner, which I had to force an older driver into the kernel to get working.)
put debian on the pc to dev with, much less gripey and intrusive, but trickier to configure.

ummkiper said:
well it took me all day to install ubuntu on this pc to find out it was my video card so im using the built in video on the mb and it worked.I will be doing this tomorrow as its 2am here now.ive never had a problem installing ubuntu before lol.the live cd would just freeze no matter which flavor of linux i used.
Click to expand...
Click to collapse
I have yet to get Ubuntu running nicely on a android. I'm sure i'll figure it out soon enough. I'm donating close to 2-4 hours a day to this right now. I hope i can get everything running how i like without learning how to write my own code... which would take forever ...

oh i dont want it on android i just wanted it on my desktop but it appears my desktop has issues while everything works fine in windows ubuntu still freezes or restarts the gui.i have xubuntu on my ibm thinkpad its slow but runs its ubuntu with xfce so i guess ill use my laptop to do this and keep win on my desktop.

ummkiper said:
oh i dont want it on android i just wanted it on my desktop but it appears my desktop has issues while everything works fine in windows ubuntu still freezes or restarts the gui.i have xubuntu on my ibm thinkpad its slow but runs its ubuntu with xfce so i guess ill use my laptop to do this and keep win on my desktop.
Click to expand...
Click to collapse
it shouldn't really matter too much what machine you use to set things up, the key things you need are a way to untar the premade filesystem, ext2 support, and a usb port to transfer files to the phone.
you could download the files in windoze if your laptop lack web access.
you <might> be able to use a windoze utility to format the first part of the SD card with a small FAT32 partition, then use CWMA recovery to add an ext2 partition to the card, then extract with 7zip on windoze into the ext partition.
I used to have a freeware program to add ext2 support to windoze, but it's buried on one of my old 500Mb harddrives in a box somewhere. bet you could google something like that up if your laptop gives you trouble.

cp ./boot.txt /media/disk/boot
cp ./firstrun.txt /media/disk/firstrun
sync
cp: cannot stat `./boot.txt': no such file or directory
cp: cannot stat `./firstrun.txt': no such file or directory
yeah um i dont see these files in the tar and this is the errorr im getting so where do i get these 2 files from

ummkiper said:
cp ./boot.txt /media/disk/boot
cp ./firstrun.txt /media/disk/firstrun
sync
cp: cannot stat `./boot.txt': no such file or directory
cp: cannot stat `./firstrun.txt': no such file or directory
yeah um i dont see these files in the tar and this is the errorr im getting so where do i get these 2 files from
Click to expand...
Click to collapse
I made the tar some time back.
boot.txt and firstrun.txt are attached to the bottom of the instructions.
edit: per ummkiper's suggestion I have also linked the attachments right after the filesystem link.

Got My Xoom running Debain native (without chroot)

Hey all,
I've installed Debian on my Xoom with the help of a few kernel patches applied to the Tiamat Sources and thought I'd share.
I can't post in the development section because I don't have enough posts. (Admin edit: Now in Development!)
I've got a full writeup of the process of installation from the ground up below
I'll be uploading the rootfs and boot.img for it when I get a chance, but i just thought some people would be interested to know that it is indeed possible (without VNC or Chroot...)
WiFi works under linux when you manually run wpasupplicant, the modem is detected by network-manager automatically and I've gotten the touchscreen working so it's actually pretty usable. no sound or graphics acceleration though as they rely on binary blobs from Nvidia.
Cheers,
Matt

Hey all,
I've seen a lot of people running linux on their android devices but chrooted under android and using a VNC client to make use of the chrooted install. quite messy and less than efficient IMHO, so I set out to install it natively on my Xoom
I've managed to get Debian installed on my Xoom with the only issues being no sound and no Bluetooth, this is due to the proprietary nature of the sound drivers for the Tegra, and the lack of documentation for the BCM4329 Bluetooth under linux. if anyone has any tips with these I'd love to hear them.
Anyway, since the Xoom is an android device with an unlockable bootloader from the factory this wasn't too difficult. the only issues were with the TegraFB and Touchscreen drivers. Thankfully Lilstevie from GalaxyLinux helped me out with the touchscreen driver and Robert Morell from NVidia provided a patch to Chromium for the FB which is here http://codereview.chromium.org/6672056
(Todo: Add guide for using WIFI, upload prebuilt images)
(Update: Fixed the links)
Basically all you need to do is build a root fs and a kernel for your Debian install. this is actually quite easy. here's how..
Contents:
Requirements
Building the RootFS
Building the Kernel
Preparing the SDCard
Putting it all together
Rolling back to Android
Acknowledgements
Disclaimer
YOU DO THIS AT YOUR OWN RISK! I TAKE NO RESPONSIBILITY FOR ANY DAMAGES TO YOU, YOUR DEVICE,
YOUR COMPUTER, OR ANY OF YOUR PROPERTY OR SOMEONE ELSE'S PROPERTY
Requirements
A Rooted Xoom with ClockWorkRecovery Installed
[*] Make sure you have a nandroid backup. you will need this to boot back into Android!
A running install of Debian, Ubuntu might work too
An SDCard with at least 4GB for the install, preferably separate from your main SDCard and an SDCard reader for your PC
Android–SDK
An Arm–linux toolchain to compile the kernel, if you're lazy like me you can just use the one that comes with the Android NDK
This Xorg Config
Kernel sources
Fastboot tool
mkbootimg
Building the RootFS
Before we do anything we'll need to get the Wifi Firmware off the default install of Android
To do this run the following commands
Code:
# adb pull /system/vendor/firmware/fw_bcm4329.bin
# adb pull /system/etc/firmware/bcm4329.hcd
MAKE A BACKUP OF YOUR SDCARD AND YOUR XOOM USING CLOCKWORK RECOVERY BEFORE CONTINUING AND KEEP IT SOMEWHERE SAFE!
Now lets install the tools you'll need to create the rootfs
Code:
# apt–get install binfmt–support qemu qemu–user–static debootstrap
Once that's done, make a directory for the rootfs to sit in until it's ready for the SDCard and start installing the debian base
Code:
# cd ~
# mkdir deb_arm
# mkdir deb_arm/boot
# sudo /usr/sbin/debootstrap ––foreign ––arch armel squeeze deb_arm/ [url]http://ftp.au.debian.org/debian[/url]
Once that's done you'll need to copy across some qemu files so you can chroot into the deb_arm folder and finish the installation of the base system
Code:
# sudo cp /usr/bin/qemu–arm–static deb_arm/usr/bin
# sudo chroot deb_arm
# export LC_ALL=C
# export LANGUAGE=C
# export LANG=C
# cd /debootstrap
# ./debootstrap ––second–stage
once that's done you'll need to edit your apt sources, to do so run the following
Code:
# echo debandroid > /etc/hostname
# echo "deb [url]http://ftp.debian.org/debian/[/url] squeeze main contrib non–free" > /etc/apt/sources.list
# apt–get update
And then install any of the apps you'll want to run on your xoom, I'd recommend at least xorg, gdm3 and gnome, so
Code:
# apt–get install xserver–xorg–video–fbdev xserver–xorg–input–evdev gdm3 gnome initramfs–tools wpa-supplicant
You may find that you get an error like the following
Errors were encountered while processing: bluez gnome–bluetooth gnome–user–share gnome–desktop–environment
If you do, it's safe to ignore this for now. you can always complete the installation of any non–critical packages on the device. it seems to be something weird with the chroot or the qemu emulation of ARM (if anyone knows a way to fix this I'd be glad to hear it!)
Once that's done, you'll not only want to set your root password but you'll want to add a standard user account too
Code:
# passwd root
# adduser liv2
# addgroup ––gid 3003 inet
# usermod –aG 3003 liv2
The addgroup and usermod are especially important, the android kernel doesn't normally allow network access to non–root accounts. so we have to add the special group then give the user access to that group (or you could compile the kernel to not use the android paranoid network settings)
Once that's done, exit out of the chroot by hitting CTRL+D and copy the xorg config to deb_arm/etc/X11/ and copy in the wireless firmware you copied at the start
Code:
# mkdir ~/deb_arm/lib/firmware
# cp ~/fw_bcm4329.bin ~/deb_arm/lib/firmware
# cp ~/bcm4329.cal ~/deb_arm/lib/firmware
Building the Kernel
For this part, make sure you've extracted the kernel sources, and the android–ndk to somewhere, in my case they've been extracted in ~/Downloads
Code:
# cd ~/Downloads/Tiamat–AOSP–Tiamat–Xoom–798572c/
# export CROSS_COMPILE=~/Downloads/android–ndk–r5b/toolchains/arm–eabi–4.4.0/prebuilt/linux–x86/bin/arm–eabi–
# export ARCH=arm
# export INSTALL_PATH=~/deb_arm/boot
# export INSTALL_MOD_PATH=~/deb_arm
# make tiamat_defconfig
# make menuconfig
Once you've got the menuconfig screen up, go to Device Drivers > Character Devices > and enable "Virtual Terminal"
go to Device Drivers > Graphics Support > Console Display Driver support > enable "Framebuffer Console Support"
once you've enabled that, exit out and save the changes
Build the kernel and prepare it for use
Code:
# make –j2
# sudo make modules_install
# sudo cp arch/arm/boot/zImage ~/deb_arm/boot
# cp System.map ~/deb_arm/boot/
# chroot ~/deb_arm
# mkinitramfs –o /boot/initrd.img.gz `ls /lib/modules`
mkinitramfs may show some warnings like "warning: can't open /etc/mtab:" and "pkg: version '2.6.36.4Tiamat_Xoom–v1.4.4–Full_Throttle' has bad syntax: invalid character in version number" but it doesn't seem to have caused any issues for me.
Preparing the SDCard
Plug your SDCard reader into your computer and insert the card, you'll then need to partition and format it so make sure you've backed up the content of the card.
Partition it so you have two partitions, the first one being a FAT32 Partition for CWR and for anything you might want to use it for under Android.
Your second partition will need to be EXT3 and big enough to fit your debian install with some room to breathe (about 4GB in my case), you can check how much space you'll need for this by running du -sh ~/deb_arm
Once you've partitioned it, format the first partition as FAT32 and the second partition as EXT3. once you've done that you should put the SDCard back in your Xoom and make a new nandroid backup just to be sure
Code:
# sudo mkfs.ext3 /dev/sdb2
# sudo mkfs.msdos /dev/sdb1
Putting it all together
First we'll mount the SDCard on your PC and copy across the Root FS
# sudo mkdir /mnt/sdcard
# sudo mount /dev/sdb2 /mnt/sdcard
# sudo cp -arv ~/deb_arm/* /mnt/sdcard/
# umount /mnt/sdcard
Click to expand...
Click to collapse
Go to the folder you unpacked mkbootimg to and copy in the boot.img from your CWR backup.
Once you've done that, follow the below steps to create the new boot.img for Debian to use
Code:
# cd ~/Downloads/mkbootimg
# cp ~/deb_arm/boot/zImage .
# cp ~/deb_arm/boot/initrd.img.gz .
# mkdir out
# ./unpackbootimg –i boot.img –o out/
# ./mkbootimg ––kernel zImage ––ramdisk initrd.img.gz ––base "`cat out/boot.img–base`" \
––cmdline "root=/dev/mmcblk0p2 console=tty0" –o newimg.img
Now reboot your Xoom into Fastboot mode and insert the SDCard, this can be done by holding power + volume up until the screen goes black, then power it back on and hold down the volume down key
Code:
# cp ~/Downloads/fastboot .
# ./fastboot flash boot newimg.img
# ./fastboot reboot
Your Xoom should now boot up into Debian, on the login screen select the accessibility options and enable on-screen keyboard to log in.
Alternatively, if you happen to have a USB-OTG adapter you can just use a keyboard and mouse to interact with the system.
Going Back to Android
To Roll back to Android, simply boot into Clockwork Recovery, go to Backup/Restore > Advanced Restore and restore boot.img only, reboot and you'll be back in Android
Acknowledgements
Lopi from the IX Project was a great help, and so was everyone from #IX
Lilstevie from @GalaxyLinux provided the Touchscreen patches
Framebuffer Patch was originally provided by Robert Morell for the Chromium Project
RootFS instructions are based on info at the Debian Wiki

Wow fantastic work, soon as I have some time to dedicate to this, I"m going to have a crack at it.

Reserved. Awesome. Hey OP just bump this thread to get your post count up so you can post this in developement. I was looking for an alternative that didn't require vnc.
Sent from my PC36100 using XDA App

I've asked a mod to move it now, I think I have the required postcount now anyway.
Just to note, you should be able to install Ubuntu, Gentoo, Fedora etc as long as you can build the root and the initrd for it.
If you do go through with this, be sure to post here! I'd love to see some ubuntu or gentoo or anything running on people's xooms really.
Also, I'm currently uploading a video I made showing how usable it really is
Cheers

maybe one day we can have a dual boot....<insert e-gasm>

Another reason xoom is a great tablet. I'm not linux savvy so I hope this becomes much easier in the future.

bilago said:
maybe one day we can have a dual boot....<insert e-gasm>
Click to expand...
Click to collapse
Actually, you kinda can!
If you don't need 3G support under Linux, you can flash the boot.img to the recovery partition and boot it that way.
If you need to use CWR later you can just restore the partition from a backup

LIV2 said:
Actually, you kinda can!
If you don't need 3G support under Linux, you can flash the boot.img to the recovery partition and boot it that way.
If you need to use CWR later you can just restore the partition from a backup
Click to expand...
Click to collapse
Can you post a pre configured build for users that dont know much about linux can use once you get sound working?

Unfortunately it's not likely I'll get the sound working due to the proprietary nature of the sound drivers. I should be able to upload the prebuilt packages soon though.

Isn't sound support typically built into the kernel or at least built as a kernel module? Is there something i'm missing?

Hey,
The problem with the sound is the same reason there is no GPU Acceleration, it requires proprietary support from NVidia binary blobs that I don't have.
It's possible I will be able to get it going properly once they release the next Linux4Tegra, but I'm not sure.

I've tried to get this going with Gentoo all weekend. I can't seem to get any boot.img to boot on the Xoom once flashed (just stays frozen at the Moto logo). Apparently fastboot boot is locked out as well so I am unable to get any debug info on screen...

Hey equid0x
I'd be glad to help
Did you make sure to enable vt support in your kernel and set console=tty0 in your boot parameters?
Is it rebooting itself when you try to use your boot.img? if so make sure your initrd is being stored in the SRV4 format, you can do this by gunziping it then type file initramdisk.img which will tell you the version.
if that doesn't help let me know

looks like i left out a step in the kernel config section
which is "go to Device Drivers > Graphics Support > Console Display Driver support > enable "Framebuffer Console Support" " after enabling VT Support
I've updated the OP now.

hi LIV2, interesting stuff you're working on here. i'm not sure if you're aware, if you aren't this is gonna be a good news most likely: http://phoronix.com/forums/showthread.php?56505-Linux-for-Tegra-release-12-alpha-1-Released
I believed there are binary blobs inside the package (haven't got the time to look at it), but there might be kernel changes needed to make it work too. I'm not sure as I'm not an expert in this area. But hopefully, this would realize a full blown linux OS on our Xoom.

Hebrew + Easy Dual Boot + Awesomeness
Well aint this something !!!
Have been waiting for this type of functionality for a long time !!! This absolutely awesome !!
So first of all - THANK YOU !
Second of all - Is there any chance you could include hebrew package with the RTL support ?
P.S : the dual boot idea is cool, but is there a way to make the device just boot into linux with a click on an icon ? (I mean run an app from android that'll reboot the tab into debian)

Firstly: this is awesome. Thank you for putting this how-to together. I've been wanting to boot Linux natively off my Xoom pretty much since the day I got it.
I originally tried to set up the chroot environment on Fedora and had all kinds of weird issues with the packages. I'm not sure if it was me or Fedora, but I ended up doing it in an Ubuntu VM instead and it worked out fine. Ultimately I'd like to actually get Fedora on the Xoom (maybe Ubuntu if I can get Unity to behave; the interface could be nice with a touchscreen).
Also, a question: How did you get your wifi set up? You noted that wpa_supplicant would work but I don't even seem to have a wifi interface present unless it has a name other than wlanX. It's not the usb0 interface, is it? My 3G adapter seems like it's recognized in the NM applet but I don't have a data plan, so it doesn't do me much good.
Lastly, I'll add a picture to the collection. Nothing super exciting - this is XFCE running on top of Debian. I've never been a big fan of GNOME and I figured it might be a little snappier
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

arctu said:
hi LIV2, interesting stuff you're working on here. i'm not sure if you're aware, if you aren't this is gonna be a good news most likely: http://phoronix.com/forums/showthread.php?56505-Linux-for-Tegra-release-12-alpha-1-Released
I believed there are binary blobs inside the package (haven't got the time to look at it), but there might be kernel changes needed to make it work too. I'm not sure as I'm not an expert in this area. But hopefully, this would realize a full blown linux OS on our Xoom.
Click to expand...
Click to collapse
Awesome
I've compiled a kernel with the audio components from the L4T Kernel sources but they don't seem to include codec support for the Xoom, I'm still playing around with this
However that is going to hopefully help with GPU support
Hyperion82 said:
Well aint this something !!!
Second of all - Is there any chance you could include hebrew package with the RTL support ?
P.S : the dual boot idea is cool, but is there a way to make the device just boot into linux with a click on an icon ? (I mean run an app from android that'll reboot the tab into debian)
Click to expand...
Click to collapse
I'll see what I can find re: language. shouldn't be too difficult, it'd just be a few different steps
As for the dualboot idea, it'd be possible to do so but I'm no coder
All it'd require is dding the boot img from within android, not sure how the NAND would hold up to constant rewrites though
eldarerathis said:
Firstly: this is awesome. Thank you for putting this how-to together. I've been wanting to boot Linux natively off my Xoom pretty much since the day I got it.
I originally tried to set up the chroot environment on Fedora and had all kinds of weird issues with the packages. I'm not sure if it was me or Fedora, but I ended up doing it in an Ubuntu VM instead and it worked out fine. Ultimately I'd like to actually get Fedora on the Xoom (maybe Ubuntu if I can get Unity to behave; the interface could be nice with a touchscreen).
Also, a question: How did you get your wifi set up? You noted that wpa_supplicant would work but I don't even seem to have a wifi interface present unless it has a name other than wlanX. It's not the usb0 interface, is it? My 3G adapter seems like it's recognized in the NM applet but I don't have a data plan, so it doesn't do me much good.
Lastly, I'll add a picture to the collection. Nothing super exciting - this is XFCE running on top of Debian. I've never been a big fan of GNOME and I figured it might be a little snappier
Click to expand...
Click to collapse
Awesome!
Something I have to add to the guide is the wifi, to do this you should have the module for bcm4329 in your /lib/modules somewhere
so to use it, run modprobe bcm4329 nvram_path=/lib/firmware/bcm4329.cal firmware_path=/lib/firmware/fw_bcm4329.bin
then you should see the interface as eth0
you'll need to make sure your wpa_supplicant conf has ap_scan=1 and fast_reauth=1 set, otherwise it won't find any APs

LIV2 said:
Awesome!
Something I have to add to the guide is the wifi, to do this you should have the module for bcm4329 in your /lib/modules somewhere
so to use it, run modprobe bcm4329 nvram_path=/lib/firmware/bcm4329.cal firmware_path=/lib/firmware/fw_bcm4329.bin
then you should see the interface as eth0
you'll need to make sure your wpa_supplicant conf has ap_scan=1 and fast_reauth=1 set, otherwise it won't find any APs
Click to expand...
Click to collapse
D'oh, I didn't even think to try running modprobe, I just assumed it was loaded That was the ticket, and wireless is working great (posting from the Debian install now!).
Looks like it's play time for me...thanks again!

[HOWTO] Install Sugar Learning Platform on a low-cost tablet

Hi there,
so this is a guide how to install the Sugar Learning Platform ( http://www.sugarlabs.org/ ), which might be known from the OLPC project ( http://one.laptop.org/ ) on a low cost tablet using Android. In this example I used the Zync Z930 ( http://www.zync.in/index.php/our-products/tablet-phablets/zync-z930-detail ), but generally spoken it should be possible on every tablet / device running Android.
Software requirements
Complete Linux Installer ( https://play.google.com/store/apps/...linuxonandroid&feature=search_result&hl=en_GB )
android-vnc-viewer ( https://play.google.com/store/apps/details?id=android.androidVNC&feature=search_result&hl=en_GB )
Android Terminal Emulator ( https://play.google.com/store/apps/details?id=jackpal.androidterm&feature=search_result&hl=en_GB )
All the software above should be free of cost (at least at the time this is written). Technically we will have running a special Fedora-ARM-Image in a chroot environment on the top of Android. But you will need root rights for this, so be aware of warranty conditions and other things as it might harm your device and make it unusable.
To root your device, you must find a method that works for your device. Many devices can be rooted according to that method , for my device I used simply adb commands as described by arunal_123 in this thread: http://forum.xda-developers.com/showthread.php?t=2093663
I did not use the files he offered as I had my own, but I think this should not change a thing. However, be aware what rooting means and if you do not know it, DO NOT DO IT.
OK, so I expect you to have downloaded the 3 applications I suggested, now that we have a rooted device, let us start the real work!
First, download the Fedora-Image file from here As you can read, this is an ALPHA version, and in fact there are some bugs, however, it should work for us, so do not worry.
Now I expect that you have the image file at /user/home/fedora.img
First you might want to enlarge the image file to allow us to install all the applications we want. You can do that like this. I used method 1. If you face some trouble that the mount-point does not exist, feel free to create it by yourself manually like that as root on terminal (I expect you to run a GNU/Linux on your computer, if you do not have one, just load down an image of for example Ubuntu and put it on your USB drive ( http://www.ubuntu.com/download/help/try-ubuntu-before-you-install )):
mkdir /media/fedoranew
OK, now that you have enlarged your image file (maybe to 2GB), let´s proceed.
Open the terminal app and type su. Now there should be a # instead of a $. If this does not work, you have not successfully rooted your device, go back to step one, if you face trouble, make a specific thread for your device, but search on the forum before. Now you can already start up fedora using the following command:
Code:
sh /data/data/com.zpwebsites.linuxonandroid/files/bootscript.sh /mnt/sdcard/fedora/fedora.img
(your image file would be on your sd-card in the folder fedora named fedora.img, on some devices the real extern sdcard might be available under ext_sd instead of sdcard).
Now some errors will popup, let us ignore them right now. So we are in fedora right now, but without graphical view. First, we can update all the stuff by using yum. Just type yum update (that might take some time, take a cup of coffee or realize that you should repaint your wall again)
Alright, so now let us install the programs we need, that is the tightvnc-server and the sugar-desktop, therefore type
Code:
yum install tightvnc-server
yum groupinstall sugar-desktop
yum install sugar-emulator
OK, now we must change the xstartup file of our vnc-server to use our own version. I actually prefer the nano-editor (you can install it with yum install nano, but vi is pre-installed, to use it, type: vi /home/fedora/.vnc/xstartup In the case it does not exist, just recreate the user fedora by deleting it by userdel fedora, also erase all files by rm -r /home/fedora and create it again by adduser fedora, just ignore any warnings. Now you should change the file like that:
Code:
#!/bin/sh
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
dbus-launch --session sugar &
Right now if you would try to start it, you would find various errors in the logfile in /home/fedora/.vnc, that is due to some strange rights for some folders and some missing devices. So here is how to fix this issue:
Code:
chmod 666 /dev/null
chmod 777 /tmp
yum install MAKEDEV
cd /dev
MAKEDEV tty
MAKEDEV pts
So now you should have all devices and sufficient permissions, but you might not have a vnc-user-password for fedora, so change to the user and make a dummy start of the vnc-server
Code:
su - fedora
vncserver
...and choose your favorite password.
Alright, go back to root via exit and shut the hole thing down via exit again.
So start Fedora again by pressing the Vol-Up button and w on the terminal, press enter.
OK, now we should have a more or less graphical interface, so start android-vnc-viewer, use the following settings:
Code:
Port-Number: 5900
Username: fedora
Password: <your_choice>
24bit colours
And connect....
Now you should see some terminal, type
Code:
sugar-emulator
Wait a second and sugar should power up. Now you should be able to start activities and also install new ones.
Enjoy Sugar on your tablet and tell me about your experiences and problems.
I just wrote this hole post out of my memory, so probability is high I forgot something, just tell me about your issues and I will update the guide.
Happy hacking!

Sugar Learning Platform on Inexpensive Chinese Tablet
I was very happy to find a post on this topic. I have a couple of Yeahpad Pillbox7 inexpensive Chinese tablets, which I purchased specifically because they are the only thing I can afford and my 4 year old twin boy and girl need a real learning computer.
I believe this topic is of the highest importance as successful implementation means making the original goal of the $100 Sugar computer a reality to the individual user who doesn't necessarily need the specifications of the XO machine.
I have been as detailed as I can be - perhaps painfully so - because I don't know what I am missing that could make the difference in turning this from a lengthy set of failed directions and notes into a functional demonstration project that proves that it is possible to reach this goal, which has been more than a decade in the making, albeit by taking some shortcuts with the lofty hardware goals and in this case running in a virtual environment which hampers performance and functionality.
If you want to start reading where following your directions starts to go haywire then skip to the dotted line of astrixs "* * * * * * * * *" and the heading in capital letters that says, "YUM UPDATE, INSTALLING TIGHTVNC-SERVER, SUGAR-DESKTOP, & SUGAR EMULATOR - RESULTING UNFOUND FILE DEPENDENCIES NOT AT ANY MIRROR"
The specifications of the Yeahpad Pillbox7 are about identical to the machine you used.
SPECIFICATIONS ON THE YEAHPAD PILLBOX7
Android Ice Cream Sandwich
Allwinner A13 CPU and Mali-400 GPU - which is ARM Cortex-A8 architecture
512 Mb RAM
4 GB internal memory
7" capacitive touch screen
some kind of wifi - supposedly 802.11n
I have a 16GB miniSDHC card I am using with a microSD adapter
I have a USB hub and have connected a mouse and keyboard to make the work easier.
PREVIOUS EXPERIENCE RELEVANT TO THIS ENDEAVOUR
I have been using the Linux On Android / Complete Linux Installer app with Terminal Emulator app and Android VNC Viewer app all from the Play store.I have successfully chroot virtualized a very basic Debian with XFCE, and also Ubuntu 12 with LXDE with these tools.
I also have been spending some time on the Linux on Android IRC channel and have Zac the creator of the app on my FaceBook page. Zac has been helpful and is very curious as to how this project goes.
My device the Yeahpad Pillbox7 is pre-rooted and only requires a "su" at terminal to get the "#" prompt.
Despite any details that indicate otherwise, I am a complete Android noob and my experience in linux is just as a distro-hopping enthusiast with no professional experience and almost no understanding. Nonetheless I try to enjoy what I do with these consumer devices and my emphasis has always been on the lower end economically, saving old machines often when there is not any funds for a new one, and for about 5 years now also getting ahold of consumer devices from China at the lowest price that can be had new and trying to modify the stock "computer" into something useful. This is my third attempt to do so in that category.
This type of chroot linux virtualization has shown the most promise as of late in the absence of driver availabilty for installing linux natively on a category of device where the manufacturers, the components they use, and the architecture has been in constant flux - but at this point in the market they are all aiming for Android v4 and up with Play store access. Since these devices are small, they seem to lend themselves to the application of young children, and also since the largest percentage of very poor users without access are young children, the application of a learning environment that emphasizes classical computer literacy with such allegories as turtle graphics to teach programming at a young age is a worthwhile lofty goal for the community to apply to the flood of inexpensive tablet computers coming our way now.
ALPHA VS BETA VERSION OF FEDORA CORE IMAGE FOR LINUX ON ANDROID
Perhaps this is where I went wrong I am using the BETA version of the Linux on Android Fedora Core image. It wasn't available when you wrote this post. Perhaps I was mistaken in thinking that the BETA would be the better image to start with. I will go back and do it with the ALPHA version next, which is per your instructions, and I will post my results again. Anyhow I took the Fedora Core image for Linux on Android and I unzipped it using 7zip, I verified the md5sum using fileverifier++ and I put on the miniSDHC card under a folder called /fedora/ and the file I named fedora.img. So I put it at /fedora/fedora.img on the miniSDHC card.
CONFIGURING MY PC TO BE ABLE TO DO IMAGE PREPARATION
I downloaded a the alternate version of xubuntu 12.04.b for 64 bit. Did an md5sum check and burned it to a CD-ROM. Then after updating the VirtualBox install on the PC I have access to is an Acer Aspire 5733-6838 which runs Windows 7 Home Premium SP1 on an Intel Core i5 with 4GB of DDR3 RAM - I installed the Xubuntu as a Guest OS on VirtualBox successfully and applied all the latest updates. Then I also installed Guest Additions and made the Drag'n;Drop and Clipboard functions bi-directional because I like being able to copy and paste in and out of my host OS while I do my work. I was able to mount the 16GB miniSDHC card onto the Guest Xubuntu OS using the USB Devices options on the VirtualBox control bar.
I did all that (installing Xubuntu) because the Linux I've been virtualizing and enjoying lately, Mageia2, did not execute the "cp -r fedoraold/* fedoranew" command which I derived from the 'expand the image directions' you referenced without generating a plethora of "cp: cannot create symbolic link" errors!
EXPANDING THE FEDORA IMAGE TO 2GB
Having switched to Xubuntu 12.04b 64bit alternate - I was able to execute the directions derived from
the directions from the linuxonandroid resource you referenced (I am not allowed to post outside links because I am a new xda forum member)
and enlarge the fedora image file to 2GB. I used these commands from terminal:
dd if=/dev/zero of=fedoranew.img bs=1M count=0 seek=2048
mke2fs -F fedoranew.img
so then I created two folders on the miniSDHC card at /fedora/ one called "fedoraold" and one called "fedorabang"
and then mounted the folders from the terminal using these commands
sudo mount -o loop fedora.img fedoraold
sudo mount -o loop fedoranew.img fedorabang
then I did the copy to the larger 2GB image file using this command from the terminal:
sudo cp -r fedoraold/* fedorabang
and finally I unmounted the folders using these terminal commands
sudo umount fedoraold
sudo umount fedorabang[/B]
I then shut down xubuntu and used the remove usb device icon from the Windows 7 taskbar to get a safe to remove the SDCard message.
I removed the miniSDHC card from the microSD adapter and inserted it into the Yeahpad Pillbox7 while powered off.
TRYING TO MODIFY THE FEDORA IMAGE ON THE TABLET TO RUN SUGAR LEARNING PLATFORM USING LINUX ON ANDROID AND ANDROID VNC VIEWER
I already have Linux on Android / Terminal Emulator / and Android VNC Viewer Apps installed on the Android Tablet.
Using File Manager I see that the newly made image is at: mnt/extsd/fedora/fedoranew.img
So after confirming that the bootscript.sh file is where it is supposed to be I use this command from the terminal to launch Linux on Android with the 2GB FedoraCore image
sh /data/data/com.zpwebsites.linuxonandroid/files/bootscript.sh /mnt/extsd/fedroa/fedoranew.img
I take the advice to ignore the errors, I've seen them before on LinuxOnAndroid during successful launches of other images.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
YUM UPDATE, INSTALLING TIGHTVNC-SERVER, SUGAR-DESKTOP, & SUGAR EMULATOR - RESULTING UNFOUND FILE DEPENDENCIES NOT AT ANY MIRROR
So I continue by trying to get all the current updates for fedora using the terminal command:
yum update
At the Transaction summary - I also respond with: "y" and [ENTER].
This is where I ran into my first set of snags - summarizing the errors Yum couldn't find these files:
bind-license-9.9.2-5.P1.fc17.noarch.rpm
dosfstools-3.0.14-1.fc17.armv5tel.rpm
selinux-policy-3.10.0-167.fc17.noarch.rpm
bind-libs-9.9.2-5.P1.fc17.armv5tel.rpm
dnsmasq-2.65-4.fc17.armv5tel.rpm
coreutils-8.15-9.fc17.armv5tel.rpm
libsss_sudo-1.8.6-1.fc17.armv5tel.rpm
iproute-3.3.0-5.fc17.armv5tel.rpm
bind-utils-9.9.2-5.P1.fc17.arm5tel.rpm
bash-4.2.39-2.fc17.arm5tel.rpm
bind-libs-lite-9.9.2-5.P1.fc17.armv5tel.rpm
selinux-policy-targeted-3.10.0-167.fc17.noarch.rpm
at any of these mirror sites:
apparently I can't post these here because I am a new xda forum member
I tried "yum update" more than once and ran into the identical set up errors, so I continued on hoping that substitute files were found, or that none of those files were essential.
So I conintued to try and install the programs your post says that I need, starting with tightvnc-server, so I use the terminal command:
yum install tightvnc-server
At the Transaction summary - I also respond with: "y" and [ENTER].
This is a summary of the files that Yum couldn't find from the errors:
perl-PathTools-3.33-221.fc17.armv5tel.rpm
perl-Pod-simple-3.16-221.fc17.noarch.rpm
perl-macros-5.14.3-221.fc17.armv5tel.rpm
perl-libs-5.14.3-221.fc17.armv5tel.rpm
perl-Pod-Escapes-1.04-221.fc17.noarch.rpm
perl-Module-Pluggable-3.90-221.fc17.noarch.rpm
perl-5.14.3-221.fc17.armv5tel.rpm
gnutls-2.12.20-4.fc17.armv5tel.rpm
I believe that Yum had tried all the mirror sites listed earlier.
As before, I have nothing else to go on, so I hope that either substitute files were found, or that none of those files were essential.
So I continue to try and install the progams your post says that I need, the next one being the sugar-desktop, so I use the terminal command:
yum groupinstall sugar-desktop
At the Transaction summary - I also respond with: "y" and [ENTER].
This is a summary of the files that Yum couldn't find from the errors:
libarchive-3.0.4-2.fc17.armv5tel.rpm
libproxy-0.4.10-1.fc17.armv5tel.rpm
gnutls-2.12.20-4.fc17.armv5tel.rpm (see above - already not found before)
I believe that Yum had tried all the mirror sites listed earlier.
As before, I have nothing else to go on, so I hope that either substitute files were found, or that none of those files were essential.
So I continue to try and install the programs your post says that I need, the next one being the sugar-emulator, so I use the terminal command:
yum install sugar-emulator
At the Transaction summary - I also respond with: "y" and [ENTER].
This is a summary of the files that Yum couldn't find from the errors:
libproxy-0.4.10-1.fc17.armv5tel.rpm (see above - already not found before)
gnutls-2.12.20-4.fc17.armv5tel.rpm (see above - already not found before)
I believe that Yum had tried all the mirror sites listed earlier.
As before, I have nothing else to go on, so I hope that either substitute files were found, or that none of those files were essential.
All in all from I read that there were 22 .rpm files missing that were not found at any of the relevant mirrors between the general yum update (12 missing files) and dependencies from tightvnc-server, sugar-desktop, and sugar-emulator (10 more missing files)
CUSTOMIZING THE XSTARTUP FILE AT /home/fedora/.vnc/xstartup FOR OUR PURPOSES
So I continud on with the instruction in your post, next on the agenda is an xstartup file for vnc-server.
You describe it as changing the xstartup file - I could used the "ls -a" command on the directory /home/fedora/ and could not find a directory called .vnc and could not find an existing file at /home/fedora/.vnc/xstartup
I too don't seem to have the talent for the vi editor so I take your suggestion and install nano using this terminal command:
yum install nano
At the Transaction summary - I also respond with: "y" and [ENTER].
There were some other files starting with "." that I found in the /home/fedora/ directory - I looked at them with the text editor and I didn't see any information that I could figure was specific to this use instance - but I am no expert. So I did the following strictly on your instructions advice.
It said if I could not find the xstartup file in existance to do the following from the terminal command line, ignoring any warnings.
userdel fedora
rm -r /home/fedora
adduser fedora
I tried the least destructive choices it gave me upon the "rm -r /home/fedora command" but it did not result in a .vnc directory or xtartup file that I could detect when completing the instructions to the "adduser fedora" command - so I repeated the commands but answered the resulting question with removal of even the /home/fedora directory. nonetheless all of that failed in creating a .vnc directory that I could detect (using the 'ls -a' command) or of an xstartup file.
So I went ahead and ad libbed the following from the terminal because otherwise anything I were to write in nano for /home/fedora/.vnc/xstartup would not save for lack of a directory for it to go in.
mkdir /home/fedora/.vnc
For some reason even after I execute the make directory command, "ls -a" from the /home/fedora/ directory still doesn't show it, but I can cd into, /home/fedora/.vnc/
From there I simply followed the directions and from the terminal:
nano /home/fedora/.vnc/xstartup
And from there entered the script given and saved it with ctrl-o and/or ctrl-x nano commands:
#!/bin/sh
[ -r $HOME/.Xresources ] && xrdb $HOME/.Xresources
xsetroot -solid grey
vncconfig -iconic &
x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" &
dbus-launch --session sugar &
ADDITIONAL PERMISSIONS AND MISSING DEVICES
So refering to your instructions once again: it says that I need to execute the following to give certain rights and take care of missing devices. So from the terminal:
chmod 666 /dev/null
chmod 777 /tmp
yum install MAKEDEV
At the Transaction summary - I also respond with: "y" and [ENTER].
Terminal responds "Complete!"
cd /dev
MAKEDEV tty
Then I enter according to your instructions
MAKEDEV pts
And the terminal responds:
don't know how to make device "pts"
So I do some research into the "Makedev" command - I can't post this url here because I am a new xda forum member.
Granted the page I find is not from the same flavor of linux but I don't see a "pts" option and it seems perhaps this is a typo.
So I need to guess what you were trying to accomplish. I decide on the following terminal command:
MAKEDEV pty
And at least there are no errors - but was it what you intended - I have no clue? also was there any reason for the Makedev command to be capitalized either when asking yum to install it or in its usage. Again I am a noob so I have no clue.
VNC-USER-PASSWORD AND DUMMY START OF VNC-SERVER AND OTHER FINISHING TOUCHES (unresolved)
From the terminal the next command in your directions gives no problems:
su - fedora
The result is the changed the prompt from [[email protected] dev]# to [[email protected] ~]$
but the next command:
vncserver
is unrecognized or any variants I try "vnc-server" "tightvnc-server" and I look for anything promising in the /bin/ and /sbin/ directories but fail to find anything.
So the part about 'choosing my favorite password' which I know I will need to use the Android VNC Viewer app to see the graphical install of the sugar learning platform, is sadly not a reality. This is confusing to me as I know the command must be available somehow as everytime one tries to launch the Linux On Android app it is a question on the user dialog, something like "start the vnc-server (y/n)" or some words along those lines, so I know there is a command to do this available.
So to shut everything down requires from the terminal:
exit
and then also again from the terminal:
exit
I am equally perplexed by the whole set of directions instructing to press "Vol-Up" button and w on the terminal.
I try it. and the Vol-Up button does register some symbol in the terminal, and I follow it with the letter "w" on the terminal and enter.
and also I try to do the two actions in conjunction, but nothing I do with those directions seems to restart Fedora that I can tell.
Can you explain that part of the directions in more detail?
I try various combinations of things I know to try but I Android VNC Viewer is failing to connect even if there is something to connect with for lack of a password
that I have not been able to set or already know. Also even after getting Linux on Android to launch the fedoranew.img that has been modified it the terminal is not
responsive on the command line to:
sugar-emulator (does nothing)
AN INVITATION TO ALL THOSE WHO KNOW BETTER AS TO WHAT I CAN OR SHOULD TRY TO DO TO MAKE THE SUGAR LEARNING PLATFORM WORK WITH LINUX ON ANDROID AND ANDROID VNC VIEWER.
I have not been able to enjoy Sugar on the Yeahpad Pillbox7 tablet,
and I am taking you up on your offer to tell you about my experiences and problems.
I know you said you wrote the post out of memory but if you could do it again taking notes while you do it so that others can try to get the same result, please comment on what you think I am doing right or wrong, or if you can remember more that might be helpful - then the world will owe you a debt as there in is in my humble opinion many many people who don't even know that they need this information yet.

OK, so what I think is that this image is somehow messed up as these unresolved dependencies indicate - in my opinion - some mis-configured setup.
Maybe the fastest solution might be to try the alpha-Image I used - if you still face trouble, please feel free to describe it as precisely and well as you did this time.
Good luck

I am about to repeat the process with the ALPHA image but..
I am about to repeat the process with the ALPHA image. But...it would help if you made comment on more than the dependency problems...
These three areas in your instructions and my comments are areas I am particularly curious about and think your input would be valuable in.
1)
For instance it would be helpful to know about what you think about what you think about my comments with the strange behavior around the /home/fedora/.vnc/xstartup file and the del and add of the fedora user.
Wouldn't it be better just to add the .vnc folder and xtartup file and doesn't the lack of a .vnc folder at all seem to indicate a step that wasn't documented?
2)
Please examine what I wrote about the MAKEDEV command. Was I correct about the typo?
3)
Please enlighten me further about your instructions regarding "Vol-up" and "w" - I can't find any information anywhere that gives me a clue about what you were trying to do there. I wasn't able to reproduce the result you got - maybe if I understood more I will be able to replicate what you were trying to do there and or find another way to do it.
Thanks so much in advance... I appreciate your interest in this topic!

For instance it would be helpful to know about what you think about what you think about my comments with the strange behavior around the /home/fedora/.vnc/xstartup file and the del and add of the fedora user.
Wouldn't it be better just to add the .vnc folder and xtartup file and doesn't the lack of a .vnc folder at all seem to indicate a step that wasn't documented?
Click to expand...
Click to collapse
As I understood you, yum install tightvnc-server fails due to unresolved dependencies. Therefore, no such folder will be created as the program is not installed. That is also why you will not get such a folder after recreating the user.
Please examine what I wrote about the MAKEDEV command. Was I correct about the typo?
Click to expand...
Click to collapse
It might be the case that it was in fact pty, not pts, I am not sure about that anymore. You can check for the success by changing into the /dev directory ( cd /dev ) and then list all entries of pty ( ls pty* ) to see whether the device was created successfully.
Please enlighten me further about your instructions regarding "Vol-up" and "w" - I can't find any information anywhere that gives me a clue about what you were trying to do there. I wasn't able to reproduce the result you got - maybe if I understood more I will be able to replicate what you were trying to do there and or find another way to do it.
Click to expand...
Click to collapse
This is only for convenience so that you do not have to write the hole command again. So when you are in the terminal emulator, by default, you should be able to go up in your bash history by pressing "Vol-up" and "w", similar to the "arrow-up" on your PC.
I hope I could help you, good luck.

Thank you.
Thank you, those are some very useful replies!
I will be sure to post the results of my next binge of effort on this project.

SOLVED! Python on the command line (scripts on post #17)

Hello everyone,
If your just reading this, skip to page 2 to save me some embarassment... Been a learning curve.
Go here .... http://forum.xda-developers.com/showpost.php?p=47607547&postcount=17
First post here and well I hope it's in the right place. I am definitely a novice programmer, am a little comfortable writing small python scripts which leads to this...
I got my phone rooted, I have sl4a ( It Nice! I like it. You like dogs?), and I just got my CM 10 source on Ubuntu 10 like Google recommends. I got adb working and Terminal IDE so I originally wanted to get python to be able to be called by the bash shell it provides ( I think its bash). I sorta got it working for a single session but what a drag, and I would get an error along the lines that the title suggests, so I,m not happy about that.
I also managed to get a copy of python from com.googlecode.pythonforandroid into /system/bin/ and now when I type "python" into an ADB shell I get the python interpreter!!! Whoo hooo, but I still got that same error. A "import sys", "import ephem", and maybe a few more workes but still something is wrong it said something thiss stuff here..
"""[email protected]:/data/data # python
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
'import site' failed; use -v for traceback
Python 2.6.2 (r262:71600, Mar 20 2011, 16:54:21)
[GCC 4.4.3] on linux-armv7l
Type "help", "copyright", "credits" or "license" for more information.
>>>
"""

update/bump
Ok so looking at the error message again it seems that it wants two prefixes for the $PYTHONHOME variable, I assume two paths and the secon one is to the executable that I put in /system/bin/ which is already in my path hence why python is callable. I had also fumbled around haphazardly with my $PATH vriables the other day and may have added the path to some of the libs python was asking for such as libpython2.6.so, I think I added the directory that lib is found in to my path (its found in "/data/data/com.googlecode.pythonforandroid/files/python/lib/" I think, need to double check that one), so thats what ive done that made this 'click' so to speak into popping out the python interpretor.
Also I found this file...MSM8960_lpm.rc but I forgot from where it came. It looks as if it contains some global variables that get set during boot, am I right?
This is the top part of it...
"""
on early-init
start ueventd
on init
sysclktz 0
loglevel 3
# setup the global environment
export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
export LD_LIBRARY_PATH /vendor/lib:/system/lib
export ANDROID_BOOTLOGO 1
export ANDROID_ROOT /system
export ANDROID_ASSETS /system/app
export ANDROID_DATA /data
export EXTERNAL_STORAGE /mnt/sdcard
export EXTERNAL_STORAGE2 /mnt/sdcard/external_sd
export USBHOST_STORAGE /mnt/sdcard/usbStorage
export ASEC_MOUNTPOINT /mnt/asec
export LOOP_MOUNTPOINT /mnt/obb
export BOOTCLASSPATH /system/framework/core.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/core-junit.jar
"""
So I am thinking that if I set the paths to my Python exec and libs here, as well as Paths for Lua, Perl, JRuby, Python 2.7, Etc, etc then I would have an assortment of scripting languages to launch into ffrom ADB, am I right? This would help me and others write scripts for ADB in many languages to do repetitive grunt work from scripts.
Any advice would be great as it works but its like python is injured, "import os" didnt work ;( but "import sys" did
It would also be nice if these same vriables could be set for Terminal Emulator, Terminal IDE, and the like, I know SSH is in the works with T. IDE and that one has telnet though I havent figured that out yet.
What should I do? This seems like an OS related issue but if the interpreter is there and compiled for arm and the libs aswell why would this not work?

python -v output
this is the "python -v" output to show what's happening, maybe it'll help....
"""
[email protected]:/ # python -v
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
# installing zipimport hook
import zipimport # builtin
# installed zipimport hook
'import site' failed; traceback:
ImportError: No module named site
Python 2.6.2 (r262:71600, Mar 20 2011, 16:54:21)
[GCC 4.4.3] on linux-armv7l
Type "help", "copyright", "credits" or "license" for more information.
>>> import sys
>>> import os
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named os
>>>
# clear __builtin__._
# clear sys.path
# clear sys.argv
# clear sys.ps1
# clear sys.ps2
# clear sys.exitfunc
# clear sys.exc_type
# clear sys.exc_value
# clear sys.exc_traceback
# clear sys.last_type
# clear sys.last_value
# clear sys.last_traceback
# clear sys.path_hooks
# clear sys.path_importer_cache
# clear sys.meta_path
# clear sys.flags
# clear sys.float_info
# restore sys.stdin
# restore sys.stdout
# restore sys.stderr
# cleanup __main__
# cleanup[1] zipimport
# cleanup[1] signal
# cleanup[1] exceptions
# cleanup[1] _warnings
# cleanup sys
# cleanup __builtin__
# cleanup ints: 3 unfreed ints
# cleanup floats
[email protected]:/ #
"""

That snippet you posted is from the init.rc inside the boot.img...so yes, it has all sorts of initialization code

CNexus said:
That snippet you posted is from the init.rc inside the boot.img...so yes, it has all sorts of initialization code
Click to expand...
Click to collapse
Ok, so I'll so some reading on setting $PYTHONHOME variable and others, I need to learn how that all works anyways. Most if not all of what I find documents how to set the variables for Windows, Mac, or Linux and not for Android. I will do my best to use that knowledge to fit this situation. I also need to dive around the file system a bit more and find all those libs and try to get the paths set for those to work with ADB and not just SL4A.
If I can do that maybe some more Linux programs/commands can be moved into Android's system, I know alot of the GUI apps for Linux have dependencies for python and gtk and qt, those modules might be portable to Android if they haven't already done so. Not to mention the other interpreters like Perl. To be perfectly honest what I want to do is port over Kali's toolset (at least the cmd line tools) over to android to they can be run from a terminal emulator or adb its self. Thats what I want to do with it, then wrap it all up into a ROM and build it. I know they have already compiled most of Kali's and BackTrack's programs on ARM so I was thinking of pulling those apps from there after an upgrade and then moving them into Androids system e.g /system/bin : /system/lib : /etc/* and so on, if the file systems are too different I suppose I can add directories and make a PATH for them or add them to $PATH once I learn how all that works.
Any good documentation on related issued anyone might be able to link to would be great, I'll be droppin by every so often while I'm grinding through google, thanks in advance for any help and thank you for your time, a bit of a read I suppose.

Environment variables like that would need to be set inside the boot.img, so if you want to unpack it and see exactly how things are defined and what other files are there (good exercise all around IMO), grab my tools from over here and unpack it for yourself and take a look:

cool tools
CNexus said:
Environment variables like that would need to be set inside the boot.img, so if you want to unpack it and see exactly how things are defined and what other files are there (good exercise all around IMO), grab my tools from over here and unpack it for yourself and take a look:
Click to expand...
Click to collapse
Well I downloaded twrp 2.3.1.0-d2spr and I used the split_boot tool in the package and got a little tree of files including the init.rc and the other msm one, they seem very similar if not identical (?), weird.
I just have a quick question, do I need to repack all this at a certain size? In other words, if I make any changes in the ramdisk image will it refuse to boot? I browsed over some sites and read somewhere that if I changed the kernal image it would fail a hash check and that the type of hashing ( I use bubble bags, but that's for another forum). How much attention do I need to pay to the size of these files I may alter before I repack and flash to the device?

Edge-Case said:
Well I downloaded twrp 2.3.1.0-d2spr and I used the split_boot tool in the package and got a little tree of files including the init.rc and the other msm one, they seem very similar if not identical (?), weird.
I just have a quick question, do I need to repack all this at a certain size? In other words, if I make any changes in the ramdisk image will it refuse to boot? I browsed over some sites and read somewhere that if I changed the kernal image it would fail a hash check and that the type of hashing ( I use bubble bags, but that's for another forum). How much attention do I need to pay to the size of these files I may alter before I repack and flash to the device?
Click to expand...
Click to collapse
Yes, actually. You need to repack at certain offsets/addresses or the device will be unable to read it properly
Run the boot_info script on your .img file and it will give you everything you need to know to repack the boot.img correctly
First you gotta repack the ramdisk (repack_ramdisk [optional out file])
Then after you do that, you can use the mkbootimg binary along with the info from my boot_info script to make a new boot.img with the right offsets
I've done a ton of boot.img splitting, so here's what it should look like (I forget the cmdline parameter)
Code:
mkbootimg --kernel KERNEL --ramdisk RAMDISK --base 0x80200000 --oversize 2048 --cmdline 'android.I.don't.remember.this.one' --ramdiskaddr 0x81500000 -o new_boot.img
Sent from my S3 on Sense 5 (you jelly?)

CNexus said:
Yes, actually. You need to repack at certain offsets/addresses or the device will be unable to read it properly
Run the boot_info script on your .img file and it will give you everything you need to know to repack the boot.img correctly
First you gotta repack the ramdisk (repack_ramdisk [optional out file])
Then after you do that, you can use the mkbootimg binary along with the info from my boot_info script to make a new boot.img with the right offsets
I've done a ton of boot.img splitting, so here's what it should look like (I forget the cmdline parameter)
Code:
mkbootimg --kernel KERNEL --ramdisk RAMDISK --base 0x80200000 --oversize 2048 --cmdline 'android.I.don't.remember.this.one' --ramdiskaddr 0x81500000 -o new_boot.img
Sent from my S3 on Sense 5 (you jelly?)
Click to expand...
Click to collapse
Thanks,
I actually just got the CWM ROM manager, I updated my CWM and am backing up my rom now, its pretty much stock lacking updates cuz of root I think, I eventually wanna get over to CM or some other rom but CM seems to be supported pretty well.
1) So the backup just finished a second ago, can I pull a boot image out of that? :EDIT: Check. I saw it in the recovered folder.
2) I'll use the boot info on that img when I get it.
3) I guess this is all for testing the variables and getting interpreters to run from adb and T.E. after that I need to install CM 10 to get some blobs, thats all thats hanging me up from modifying the source to build my own version, this is great exercise as it will need to be done when building this "Cyano-Kali" or whatever, I was also thinking "Kali0id" as in Kalioid and Kali zero i.d.

ok well I did some messing around and I got this lill chroot setup working from adb which is kool, I just took a no gui kali.img and a script I found to chroot into it ( Maybe Google "Weaponizing Android"), it needs a lil investigating though I get a couple errors, it looks like it was modified from a chroot into ubuntu (arm).
I put the script into /system/xbin/ and then made it executable (that seems to be the only place I could chmod), I looked at the sript at it points to a coded directory for the kali.img which is something like "/storage/sdcard0/kali/kail.img". This puts the script in a location that is already in the environ variable and you can call it from any cwd by typing "kali".
Note: Interesting tip (may be trivial to the pros), typing "bash" gives me a colorful interface and the bash interpreter, this is good for a first command when entering the terminal or adb because then you can modify the bash rc file found in "/system/etc/bash/" (I think, I'll double check later.*FIXED*).
So, I think I might be able to mod those variables there to include PYTHONPATH, PYTHONHOME, etc...
Then when I launch bash i should be able to launch python and whatever else. (*Check*, it works but you must first "bash" and then "python" to allow the bashrc file to get ran and add PYTHONHOME and PYTHONPATH to the enviroment)
I think the first shell that you get put into is shell and not bash but maybe I'm wrong.
*side note, If you want to su into bash its best ime to do that first, then bash, otherwise when you su while in bash you loose the color, idk why.
heres my results so far...
Code:
[email protected]:~$ adb devices
List of devices attached
xxxxxxxxxx device
[email protected]:~$ adb shell
[email protected]:/ $ su
[email protected]:/ # bash
void endpwent()(3) is not implemented on Android
localhost / # kali
ioctl LOOP_SET_FD failed: Device or resource busy
mount: Device or resource busy
net.ipv4.ip_forward = 1
[[email protected] ~$ cd .. && ls
bin dev home lost+found mnt proc run selinux sys usr
boot etc lib media opt root sbin srv tmp var
[[email protected] /$ which macchanger
/usr/bin/macchanger
[[email protected] /$ which ophcrack
/usr/bin/ophcrack
[[email protected] /$ which reaver
/usr/bin/reaver
[[email protected] /$ which aircrack-ng
/usr/bin/aircrack-ng
[[email protected] /$ python --version
Python 2.7.3
[[email protected] /$ perl --version
This is perl 5, version 14, subversion 2 (v5.14.2) built for arm-linux-gnueabi-thread-multi-64int
(with 80 registered patches, see perl -V for more detail)
Copyright 1987-2011, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using "man perl" or "perldoc perl". If you have access to the
Internet, point your browser at http://www.perl.org/, the Perl Home Page.
[[email protected] /$ bash --version
GNU bash, version 4.2.37(1)-release (arm-unknown-linux-gnueabi)
Copyright (C) 2011 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software; you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
[[email protected] /$ python
Python 2.7.3 (default, Jan 2 2013, 22:35:13)
[GCC 4.6.3] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import os
>>> import sys
>>>
[[email protected] /$ exit
Shutting down Kali ARM
failed: Device or resource busy
losetup: /dev/block/loop255: Device or resource busy
localhost / # exit
1|[email protected]:/ # ^D
1|[email protected]:/ $ ^D
[email protected]:~$
Does anybody know how to mount an external sdcard from the command line on the Debian version of Linux on Android?
Is that even possible, like driver wise and what not?

Nice!
To mount it, first you would need it's device name or UUID..
Sent from my S3 on Sense 5 (you jelly?)

Success!
Alright! I got Python working from the terminal emulator!
I ended up copying the files that got installed by the original installer into my system/ lib, xbin, and, bin directories I just kinda put stuff here or there and then I just got one error about platform independent libraries instead of both dependent and independent. I'm alil add about things sometimes. Then about ten minutes ago while chilling on the patio the syntax for the PythonHome and path variables became clear to me. So i changed it to export and wrapped the paths in quotes and figured out the prefix : exec_prefex thing.
Now python works!!!!!!! ill run it on adb tomorrow and show the results as well as exactly how to get it working after i figure out exactly what i did right. It was probably the last thing.

Edge-Case said:
Alright! I got Python working from the terminal emulator!
I ended up copying the files that got installed by the original installer into my system/ lib, xbin, and, bin directories I just kinda put stuff here or there and then I just got one error about platform independent libraries instead of both dependent and independent. I'm alil add about things sometimes. Then about ten minutes ago while chilling on the patio the syntax for the PythonHome and path variables became clear to me. So i changed it to export and wrapped the paths in quotes and figured out the prefix : exec_prefex thing.
Now python works!!!!!!! ill run it on adb tomorrow and show the results as well as exactly how to get it working after i figure out exactly what i did right. It was probably the last thing.
Click to expand...
Click to collapse
Nice
Sent from my S3 on Sense 5 (you jelly?)

Solution !
Ok I got everything cleaned up a bit, lets see whats going on here...
So hopefully bash is preinstalled for everyone, I just found it, the only changes I made in the past week are installing...
1) CyanogenMod, I believe you will need to already be rooted, have busybox, and a custom recovery to get this far. If you can get CyanogenMod working then you'll probably be able to replicate this, mayeb even with just root and busybox on a stock sprint rom, idk.
2) SL4A along with Python 2.6, Perl, and JRuby. (I hope normal ruby programs can be ran will JRuby, if not I'll either mod the programs or port ruby to android or look for another port.
3) Terminal IDE. This could have been a source of bash if it wasn't native to android or the Terminal Emulator/busybox.
Once you have The above, at least python 2.6 with SL4A, Terminal Emulator, Busybox, and root.
You can (the file system maybe different for different phones but since we are in a specific place of this forum I'll stick with what I found on my phone specifically)
Use a root browser and find a way to remount your file system to read/write or r/w or rw mode so you can write to /system directory. It is located in the / directory of the entire system, not just the sdcard0 partition.
You can open a terminal and type "set" to get a closer look at whats happening here on Android. We are mainly interested in the Environment Variables.
What I did was copy
"/storage/sdcard0/com.googlecode.pythonforandroid/extras/python" ----> "/system/etc/python" ##THIS IS A DIRECTORY
"/data/data/com.googlecode.pythonforandroid/files/python/lib/python2.6" ----> "/system/lib/python2.6" ##THIS IS A DIRECTORY
"/data/data/com.googlecode.pythonforandroid/files/python/bin/python" -> "/system/xbin/python ##THIS IS A FILE, IT IS AN EXECUTABLE!
"/"/data/data/com.googlecode.pythonforandroid/files/python/lib/" ----> "/system/lib/python2.6/" ##WE WANT ALL THE "*.so" FILES NEXT TO THE ORIGIONAL "*/PYTHON2.6/" DIR IN THE "DATA/DATA/" SIDE OF THE TREE TO BE COPIED TO THE SYSTEM SIDE AND INTO THE "/system/lib/python2.6/" DIR NEXT TO THE "/system/lib/python2.6/lib-dynload/" DIR
We want our "/system/lib/python2.6" directory to contain the following :
"/lib-dynload" is a dir; and all the .so files from earlier there are about 8 with a fresh install of python and no modules, some of you may already know how to incorporate modules from this point, but I still need to do some experimenting.
---------------------------------------------------------
OK
if you still following then your gonna wanna do the following
go to "/system/etc/bash" and open the bashrc file, we need to add PYTHONPATH and PYTHONHOME to it, this is how I set it up....
About half way down it will read
Code:
"""
# set some environment variables
HOME=/sdcard
TERM=linux (maybe change this to "Administrator" but that may break something)
"""
# Our additions follow:
export PYTHONHOME="/system/etc/python:/system/xbin/python"
export PYTHONPATH="/system/etc/python:/system/lib/python2.6/lib-dynload:/system/lib/python2.6"
Ok, now if you go to your teminal emulator or ADB shell you can type:
bash [press enter]
python [press enter]
and check out the results
or
su [enter]
bash [enter]
python [enter]
and see what happens
whats happening is that your PYTHONHOME and PYTHONPATH variables are being set when you enter bash, and since they are exported from the bashrc file they get carried over to any child activities that may spawn, such as "python". Correct me if I am wrong.
I may have forgot some little file I put somewere a few days ago or something so let me know if it doesn't work for you i'll do my best to help you get it working on your phone to,
other then finding a rc file for the shell that you start with when you launch the terminal or any other process maybe even, I may need to do what CNex suggested and complete the change in a boot.img to flash to my phone. that should result in the variables being passed to all activities.
Peace yo
Any questions I'll drop around if this dies of from here, well live and let die I suppose.

Just a screen shot
Just a screen shot.

I found the "mkshrc" file in "/system/etc" today so I added the PATHs to that file and now when teminal emulator starts it has access to python's libs. ("/system/etc/mkshrc" should be the location)
I've run into two problems, the first I can live with, the second is only more reason to port Kali's toolset into android.
1) I can't yet access the pydocs for interactive help, for example...
Code:
[email protected]:~$ adb shell
[email protected]:/ $ python
dlopen libpython2.6.so
Python 2.6.2 (r262:71600, Mar 20 2011, 16:54:21)
[GCC 4.4.3] on linux-armv7l
Type "help", "copyright", "credits" or "license" for more information.
>>> import android
>>> help (android)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/site.py", line 431, in __call__
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/pydoc.py", line 1720, in __call__
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/pydoc.py", line 1766, in help
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/pydoc.py", line 1508, in doc
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/pydoc.py", line 1314, in pager
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/pydoc.py", line 1338, in getpager
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/tempfile.py", line 286, in mkstemp
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/tempfile.py", line 254, in gettempdir
File "/home/manuel/AptanaStudio3Workspace/python-for-android/python-build/output/usr/lib/python2.6/tempfile.py", line 201, in _get_default_tempdir
IOError: [Errno 2] No usable temporary directory found in ['/tmp', '/var/tmp', '/usr/tmp', '/']
>>>
And
2) When I chroot into Kali.img the PYTHONPATH and PYTHONHOME variables get carried over and interfear with python within Kali. ????
Work around: is just modifing "bashrc" then when you want python or other inerpreters launch bash first and call kali from shell.
Solution: is porting Kali's Toolkit and more Linux programs and commands into Android. Then release as rom or give instructions on how to set up.

No Really, I think I got it figured out this time.
If your running python 2.6 via Py4a then youll use the first script to access python from the command line or over adb, you'll need su to but it in /system/bin or /system/xbin and to use this command to write to the system partition "mount -wo remount systemfs /system" when your done use "mount -ro remount systemfs /system" (with out the quotes of course).
Note: adbd can only be ran as root, so this method will only work as root. Also I had some trouble disconnecting from adb as "exit", it hung till I unplugged the phone from usb. But, still I got to run scripts python that utilize the androids api with-out having to directly open sl4a and then the python interpreter from there.
Note2: Maybe one who was slick enough could get the source for sl4a and pick out the server and facade code, then make a little dex to be ran from the command-line instead of starting the server via "am" and instead of using sockets, maybe ashmem to share the JSON results that get sent back to python.
This is the script for 2.6 :​
Code:
#!/system/bin/sh
am start -a com.googlecode.android_scripting.action.LAUNCH_SERVER \
-n com.googlecode.android_scripting/.activity.ScriptingLayerServiceLauncher \
--ei com.googlecode.android_scripting.extra.USE_SERVICE_PORT 54326
export AP_PORT=54326
export AP_HOST=127.0.0.1
adbd &
export EXTERNAL_STORAGE=/mnt/sdcard/com.googlecode.pythonforandroid
export PY4A=/data/data/com.googlecode.pythonforandroid/files/python
export PY4A_EXTRAS=$EXTERNAL_STORAGE/extras
PYTHONPATH=$EXTERNAL_STORAGE/extras/python
PYTHONPATH=${PYTHONPATH}:$PY4A/lib/python2.6/lib-dynload
export PYTHONPATH
export TEMP=$EXTERNAL_STORAGE/extras/python/tmp
export HOME=/sdcard
export PYTHON_EGG_CACHE=$TEMP
export PYTHONHOME=$PY4A
export LD_LIBRARY_PATH=$PY4A/lib
$PYTHONHOME/bin/python "[email protected]"
This one is for 3.2 :​
Code:
#!/system/bin/sh
am start -a com.googlecode.android_scripting.action.LAUNCH_SERVER \
-n com.googlecode.android_scripting/.activity.ScriptingLayerServiceLauncher \
--ei com.googlecode.android_scripting.extra.USE_SERVICE_PORT 54332
export AP_PORT=54332
export AP_HOST=127.0.0.1
adbd &
export EXTERNAL_STORAGE=/mnt/sdcard/com.googlecode.python3forandroid
export PY34A=/data/data/com.googlecode.python3forandroid/files/python3
export PY4A_EXTRAS=$EXTERNAL_STORAGE/extras
PYTHONPATH=$EXTERNAL_STORAGE/extras/python3
PYTHONPATH=${PYTHONPATH}:$PY34A/lib/python3.2/lib-dynload
export PYTHONPATH
export TEMP=$EXTERNAL_STORAGE/extras/python3/tmp
export HOME=/sdcard
export PYTHON_EGG_CACHE=$TEMP
export PYTHONHOME=$PY34A
export LD_LIBRARY_PATH=$PY34A/lib
$PYTHONHOME/bin/python3 "[email protected]"
Explanation:​-First, the server which handles calls to Android's APIs gets starts by it's activity with am and port is set.
-Second, AP_PORT and AP_HOST get exported so that android.py will have its parameters set to interact with the "facade"
-Third, adbd gets started in the background (I cant give a full explanation, but I found the RPC mechanism between the python interpreter and the sl4a server when android.py is imported and droid.* is attempted)
-Fourth, Python's environment variables get set, doing it this way helps to avoid copying the whole python installation to /system (as I did in the past ), just put one of these scripts in /system/bin or /system/xbin and name it "python" then chmod the script "chmod 755 python" you will be able to call the interpreter and put the shabang in your python scripts (ie "#!/system/bin/python").
-Fifth, launch the interpreter.
Here is a short session over adb:​
Code:
[email protected]:/ # python
dlopen libpython2.6.so
Python 2.6.2 (r262:71600, Mar 20 2011, 16:54:21)
[GCC 4.4.3] on linux-armv7l
Type "help", "copyright", "credits" or "license" for more information.
>>> import android
>>> droid = android.Android()
>>> droid.makeToast("Hello!")
Result(id=0, result=None, error=None)
>>> droid.getLastKnownLocation()
Result(id=1, result={u'passive': {u'bearing': 0, u'altitude': 0, u'time': 1384816643565L, u'longitude': -67.551754299999999,
u'provider': u'network', u'latitude': 96.0520909, u'speed': 0, u'accuracy': 3533}, u'network': {u'bearing': 0, u'altitude': 0, u'time':
1384816643565L, u'longitude': -67.551754299999999, u'provider': u'network', u'latitude': 96.0520909, u'speed': 0, u'accuracy':
3533}, u'gps': None}, error=None)
>>> exit()
And some credit to others:
http://code.google.com/p/python-for...sh?r=997929b1bbaa53cdf76acfff419ec13c13f869b7
http://stackoverflow.com/questions/10839879/python-sl4a-development
Those are links to where I got some info from to help put this together. The adbd thing was just trying "adb forward tcp:xxxx tcp:xxxx" but that didn't work, so I tried adbd forward tcp:xxxx tcp:xxxx and it looked like it hung there, so I ctl^ c and then just adbd and it hung there again, but when used the "&" to background it and then went to python to try android.py, it worked:good:
And for a lot of fun, go here:
http://code.google.com/p/android-scripting/wiki/ApiReference
-or here-
http://www.mithril.com.au/android/doc/index.html

[GUIDE] Ubuntu Budgie 19.04/19.10 on Schneider SCT101CTM

Copied from github repository. For updated info and download files go to github repository sct101ctm
This document describes the process to install Ubuntu Budgie 19.04 on Schneider SCT101CTM which comes with a preinstalled Windows 10. It is required a working installation of Ubuntu (or virtual machine) to prepare the bootable USB. Installation of regular Ubuntu and Xubuntu is similar. Regular Ubuntu is slow with 2GB RAM. The same process applies for 19.10 versions
Prepare bootable USB on a Ubuntu installation
Download Ubuntu/Ubuntu Budgie
Install isorespin. This tablet requires a 32bit UEFI boot to load a 64bits OS. Ubuntu comes with 64bits bootloader. To replace with a 32bit UEFI bootloader use isorespin script
Create the iso with 32bit bootloader
isorespin.sh -i ubuntu-budgie-19.04-desktop-amd64.iso
Create a bootable USB with Startup Disk Creator
Change UEFI boot order in Windows on Schneider
Boot Windows 10 and insert bootable USB
Open a terminal window with cmd and reboot into UEFI
shutdown /r /fw
In Ubuntu from command line: systemctl reboot --firmware-setup
Or after shutdown press Power on and Volume+ until Schneider logo appears. From grub menu select System Setup
In UEFI menu go to Boot tab and change the boot order or override boot to the USB, then Save & exit
Install Ubuntu
Install Ubuntu Budgie from grub menu. If you select Try before installing the mouse pointer position will be inverted from screen which makes it difficult to use. This is related to the x session manager. Regular Ubuntu comes with gdm3 whereas Budgie comes with lightdm. A workaround is to install gdm3 >=3.32 with limitation to start the session in horizontal position. The pointer is not rotated and you are able to rotate the screen after. Though starting the session in vertical, the problem persist
If screen orientation is inverted xrandr -o 1
For network connection you can use wifi or usb tethering. If using wifi better connect now as in the next step you will need it and the mouse pointer will be rotated (if installing Ubuntu Budgie)
Alternatively you can connnect to wifi using nmcli
nmcli d wifi connect <wifiSSID> password <wifiPassword>
It is recommended the installation option that deletes the entire SSD as it is only 32GB, barely enough for dual boot, altohugh is doable (not covered here)
Fix inverted pointer
After installation at first boot the mouse pointer is inverted from the screen (only Ubuntu Budgie). To fix this install gdm3. If wifi is not available Shutdown and Power on (no reboot)
Press Ctrl+Alt+T to open terminal
Rotate screen
xrandr -o 1
Install gdm3
sudo apt-get update
sudo apt-get install gdm3
In the configuration menu select gdm3
Fix screen orientation
To fix screen orientation create a udev rule for the accelerometer sensor in /etc/udev/hwdb.d/61-sensor-local.hwdb
sensor:modalias:acpi:BOSC0200*:dmi:bvnAmericanMegatrendsInc.:bvrSCH12i.WJ210Z.KtBJRCA03*
ACCEL_MOUNT_MATRIX=-1, 0, 0; 0, 1, 0; 0, 0, 1
(second line has to be indented)
Update udev rules:
sudo systemd-hwdb update
sudo udevadm trigger -v -p DEVNAME=/dev/iio:device0
Shutdown and power on
If installing Xubuntu, iio-sensor-proxy may not work properly. Alternatively use rotate.py script
SD card
Some SD cards are not initialized. If SD card is not initialized with error mmc2: error -84 whilst initialising SD card apply patch to kernel as described below
Touchscreen driver
Wifi, bluetooth and audio works out of the box. For the touchscreen it is needed to install the driver and firmware. Thanks to gsl-firmware I've ported the firmware to linux. Use files in touchscreen folder. There are two open source drivers: gslx680_ts_acpi and silead_ts
gslx680_ts_acpi (the easy way)
Copy silead_ts.fw to /lib/firmware
Compile the driver gslx680_ts_acpi to obtain gslx680_ts_acpi.ko. Test the module with sudo insmod gslx680_ts_acpi.ko. You need to recompile for different kernels
To do this permanent:
Create the file /etc/modules-load.d/gslx680_ts_acpi.conf and add:
gslx680_ts_acpi
Then copy the module to the system folder and build dependencies:
sudo cp gslx680_ts_acpi.ko /lib/modules/$(uname -r)/
sudo depmod
To test the installed module:
sudo modprobe gslx680_ts_acpi
lsmod | grep gslx680_ts_acpi
Kernel driver silead_ts (the hard way recommended)
Delete file /etc/modules-load.d/gslx680_ts_acpi.conf if created
Copy kernel firmware to /usr/lib/firmware/silead/
General instructions to compile the kernel here
Add sources. Uncomment lines in /etc/apt/sources.list
deb-src http://archive.ubuntu.com/ubuntu disco main
deb-src http://archive.ubuntu.com/ubuntu disco-updates main
Prepare environment
sudo apt-get install build-essential devscripts equivs libncurses5 libncurses5-dev
Build dependencies with mk-build-deps so later they can be easily removed
mk-build-deps linux --install --root-cmd sudo --remove
Download sources
apt-get source linux
Change to sources folder (e.g.: linux-5.3.0)
Apply patch touchscreen_dmi.patch
patch -p1 < <path to patch>/touchscreen_dmi.patch
Some SD cards are not initialized. If SD card is not initialized with error mmc2: error -84 whilst initialising SD card apply patch sdhci.patch
patch -p1 < <path to patch>/sdhci.patch
Copy kernel .config
cp /boot/config-$(uname -r) .config
Change config options
scripts/config --disable DEBUG_INFO
scripts/config --set-str CONFIG_LOCALVERSION "-sct101ctm"
(Optionally you can do make localmodconfig and add additional drivers with make menuconfig to reduce building time and increase free ram)
Compile and install
make -j 4
sudo make modules_install
sudo make install
Bluetooth
Bluetooth won't work after suspend. To fix this create the script /usr/lib/pm-utils/sleep.d/99bluetooth to be executed after suspend:
#!/bin/sh
case "$1" in
resume)
rfkill block 2
rfkill unblock 2
esac
Make it executable with chmod
Other tweaks and fixes
Wifi won't work after restart. Instead do a shutdown and power on
The keyboard does not have all keys. Shortcuts for some missing keys:
< Shift+AltGr+Z
> Shift+AltGr+X
Esc Ctrl+AltGr+
Touchscreen scrolling in Firefox doesn't work. To fix this add to the file /etc/security/pam_env.conf
MOZ_USE_XINPUT2 DEFAULT=1
To avoid double click when single clicking with the touchpad increase Double click delay in Settings Universal access
Increase mouse pointer size Settings Universal access
With gnome-tweaks and increase font scale in Settings in Fonts
Install dconf-editor and increase launcher icon size in /net/launchpad/plank/docks/dock1/icon-size
Built-in gnome OSK does not work in Ubuntu Budgie/Xubuntu. Instead install onboard
Cameras not working
Cameras (ov2680) don't work. This camera requires the atomIsp driver and it has been discontinued for now. It was a stagining driver until kernel 4.14, then removed. It compiles and detects the camera, but does not work at all. See bug