Im getting a smartwatch 3, does it with with Mapmywalk app full version ?? If so how does it sync as I can't find anything in the application itself
I just got my watch ! Plugged it in, upgraded to 5.1.1 ... And suddenly Mapmywalk installed on the watch ..happus
Related
I am having problems keeping the watch connected to my phone. Android Wear will report it's connecting... then disconnect very quickly. It will repeat this cycle over and over. On the watch, it shows a little cloud icon with a slash thru it, pulling up Google Now reports the watch is disconnected.
My phone reports it is paired with the watch via bluetooth and the radio is turned on. I tried changing my wifi access to use my 5G radio instead of 2.4 but that didn't help. No other bluetooth devices are paired with my phone or with my watch. Phone is a Galaxy Note 2 running Android 4.4.2. Any suggestions that I can try?
I have this as well with my GS4.
are you having this issue when the phone is near you or like say across the house from you?
I got my watch yesterday.
Problem occured with out of the box firmware (4.4.4). I manage to reconnect and connect last enough to update to 5.0.2. ANd there I was hoping it will be good. But unfrontunately no. I still have the problem.
I have a galaxy note 4 (N910F) on Lollipop. I reset factory my phone and the watch. I have stil random disconnections. And when disconnected, It is hard to made the watch reconnect. Didn't have any problem with my LH watch R.
Kind of disappointed by the Moto 360 (a colleague with a one plus one and the same watch doesn't have such problems.
Really don't know mess things up.
What a burden to have to reset the watch each time we need to connect to a new mobile / reconnect to the current one.
They should have add an option to connect / disconnect
Hi All,
I have receive for Christmas a SW3.
I already have a LG G2 (D802) running Lollipop :
http://forum.xda-developers.com/lg-g2/development/rom-liquidsmooth-v4-0-lg-g2-t2948395
With Render Kernel :
http://forum.xda-developers.com/lg-g2/development/kernel-render-kernel-aosp-lg-roms-t2803929
I have update the SW3 to official 5.0.1 with PC Companion.
Then install Android Wear from the market on the phone :
https://play.google.com/store/apps/details?id=com.google.android.wearable.app&hl=fr
I had "Sleep as Android" app already installed on the phone before get the watch.
I have connect the watch to the phone then I have try to install different apps as :
https://play.google.com/store/apps/details?id=com.npi.wearminilauncher
and
https://play.google.com/store/apps/details?id=com.appfour.wearbrowser
Without problem, the apps appear on the watch., "Sleep as Android" too.
But now, I can't success to install any other apps. I have try :
https://play.google.com/store/apps/details?id=rocketstartups.wearcalculator
Or
https://play.google.com/store/apps/details?id=co.hoomi.athere
But the apps doesn't appear on the watch, I don't understand how to sync the phone and the watch.
I guess I'm too new and there is something that I haven't understand.
Please someone drive me !
Thank you in advance.
Tell me if I'm wrong.
Android Wear is the only "must have" app to manage the watch ?
No need Smart Connect or LiveWear ?...
Open android wear on phone click on the settings gear and click on resync apps
Hello,
Thank you but That doesn't help...
What app do you use to sync the watch?
-JFK- said:
Tell me if I'm wrong.
Android Wear is the only "must have" app to manage the watch ?
No need Smart Connect or LiveWear ?...
Click to expand...
Click to collapse
Android wear is a "must-have" app. And you need also "Google" search app to make sure android wear runs well. (for "ok google" function certainly.)
Did you try to "forget watch device" in android wear and repair it ?
Maybe a factory reset will help, but it is the last option.
Thank you for your reply.
I have disable the location to save battery and the sync have work...
I don't understand!
But now, all work as it should.
Hi,
I'm an expert on SmartWatch 3 and have met with a programmer from the Google team. You require 2 things to fully install apps on your watch, which take max 60 minutes to sync to your watch 100%
1. The first requirement to make sure apps install 100% is a WiFi router network which your phone is connected to, and your SmartWatch 3 is within range of the
area of the router.
2. Your Smartwatch 3 and your Android phone on charge during about 1 hour. The apps sync fast while the battery is being charged, and sync slower if not plugged in.
Do these two things, and the apps will install over WiFi directly from your phone to the watch through WiFi settings of the router.
I just lived in Philippines for 1 month, bought a new Sony phone there and tried installing my Smartwatch 3 over mobil data connection to the phone without a router and not a single app synced. 1 week later ONE app synced. I came home to my country of Sweden with my router and did the same thing with a reset of the watch, and all apps synced in about 45 minutes.
I managed to get my Zenwatch set up for the first time with my Galaxy S4 (running Lollipop 5.0.1) yesterday, but following an OTA update on the watch (to 5.1.1) the battery life seemed awful (about 8 hours), so I tried a factory reset of the watch. Since then I have struggled to get the phone to re-connect to the watch.
I've tried another factory reset of the watch, and un-installing the Android Wear and Asus Zenwatch Manager apps from my phone, but the Android Wear app will not connect to the watch - it just hangs at "Connecting..."
I did manage to manually pair with the watch using Bluetooth Settings on the phone, and this got the Android Wear app connected, but I was still unable to connect the Asus Zenwatch Manager app to the watch, and the clock on the watch was showing 1 hour behind (my local time is BST), and I wasn't receiving any notifications on the watch.
So I factory reset the watch again, uninstalled and re-installed Android Wear on the phone, and I'm back to the situation where the Android Wear app will not connect to the watch.
Any ideas??
I occasionally have that problem, reboot the phone and watch and all is well again.
Sent from my BN NookHD+ using Tapatalk
Unfortunately a phone reboot didn't do it for me. I found that "forgetting" the watch from the Android Wear app, then a factory reset of the watch, got me reconnected to the Android Wear app, but I still couldn't get the Asus Zenwatch Manager to connect to the watch.
Re update again, i find it update are downloaded in the watch and waiting for us to execute, just go to setting on your watch and choose about, then software update. there must be and update waiting and you can just touch update... it works with me... just make sure you check software update regularly if this problem happens. it just need to most update android wear to be installed and will connect with the latest zenwatch manager
hope this help
Maybe the wrong tread but I need help!
I have a HTC 10 (Nougat) with the Gear APP installed and try to connect with my new Gear S3.
But it always fails.
The app will not connect to the watch.
In bluetooth (HTC 10) I can see the watch an it is connected.
I hape that anyone can help me connecting the watch.
rogermiet said:
Maybe the wrong tread but I need help!
I have a HTC 10 (Nougat) with the Gear APP installed and try to connect with my new Gear S3.
But it always fails.
The app will not connect to the watch.
In bluetooth (HTC 10) I can see the watch an it is connected.
I hape that anyone can help me connecting the watch.
Click to expand...
Click to collapse
This Problem was solved by @J To the 4 n , with a modified Samsung Gear Manager App
Here is the link to his Thread...
https://forum.xda-developers.com/an...d-samsung-gear-app-android-n-samsung-t3547035
I have a Gear S3 an its working with LeeDroiD htc10 ROM, with this Fix.
Do you have the Samsung Accessory Service app installed?
and try to remove the pair in bluetooth devices.
I had this problem with my S2 on stock nougat before with the latest versions of the Samsung apps on Nougat. but this was due to a backup of my HTC 10. a clean installed fixed the issues.
But if you don't wanna do that, check that you have all the apps installed.
Samsung Gear
Samsung Accessory Serive
(Samsung S Health)
And do a complete unpair of the watch
Hi guys
So, I've recently picked up my 8 year old Sony SmartWatch 2 and some wristbands for it since mine constantly self destroyed themselves, being the reason i stopped using the watch in 2017 or so.
So, I use a Samsung Galaxy A7 (2018) with android 10 and one ui 2.0 and I installed the Smart connect version 5.7.35.0001 as recommended in one of the posts here I believe and I've sideloaded the Smartwatch 2 host app both found on sony's website (https://www.sony.com/electronics/su...es-xperia-smart-devices/sw2/articles/00241423) and one found on the same post in XDA that i saw for the companion app. The thing is, I can't get the text companion app (the official one) to show up on the watch and on the host app after being sideloaded, neither the gmail, the call manager and anything at all.
I've tried anything from resetting the watch a bunch of times to installing older versions of the host and smart connect app, but i still can't get it to work.
Can anyone help me please? I really like this watch