Related
I see that the wall charger for the Galaxy Nexus outputs 5V and 1A. Unfortunately, none of the extra chargers I'd like to use as additional chargers have this output. Some of them are 5.1V, and some of them all put out under 1A.
From what I understand, using a charger w/ a higher voltage could potentially damage the phone. I know that this unlikely considering it's only an extra .1V in my case, but I don't want to risk it.
As for the amps, I believe that using lower amps isn't dangerous, but may result in charging taking longer than normal.
Are these two assumptions correct? Also, does anyone know of any cheap chargers that put out 5V/1A? If you put in "phone charger" in Amazon, the second hit is a Samsung OEM charger that puts out 5V/0.7A, but I'd rather get one that is going to be an exact match.
700-800mah are fine and acceptable for charging. But if wanting to play games on a charger and still get some kind of charge, go with a 1000 mah charger. 1000 mah charger is also best to use while using mhl so you can hopefully not lose battery charge while streaming video over hdmi.
Sent from my samsung gt i9250 which is in the wrong country.
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Micro-Travel-Charger-M540/dp/B002HJBM04
http://www.amazon.com/Samsung-Travel-Charger-Adapter-MicroUSB/dp/B0049IE70I
Dmw017 said:
Speaking of the charger... anyone found a cheap charger adapter for the Nexus? I don't like the massive brick of a "international adapter" Handtec packaged with the phone >.>
Click to expand...
Click to collapse
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
alee said:
I'm using a Griffin charger for the iPhone (1 amp)... it's very small and the plug blades fold up, making it very pocketable. Give the included iPhone cable to a friend.
http://www.amazon.com/Griffin-NA231...?s=electronics&ie=UTF8&qid=1322795627&sr=1-33
Click to expand...
Click to collapse
it's.. 24 bucks ... for a charger..
lol fml
Dmw017 said:
it's.. 24 bucks ... for a charger..
lol fml
Click to expand...
Click to collapse
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
alee said:
Haha, it's a nice charger.
If you don't get that one, do get a charger that does at least 700mA... or ideally 1A. Some of the cheaper chargers don't put out a lot of power and it will take a long time to charge your phone.
Click to expand...
Click to collapse
...you say it folds too huh :/ ....
but for that price, i wonder if there are any samsung chargers that are just as good if not better..
that is Apple, after all
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Dmw017 said:
hey isnt http://www.amazon.com/Griffin-Techn...al-USB-Charging/dp/B004EYH5WY/ref=pd_sim_e_10 the same product , it says it does 5 volts at 5 watts ... thats the same right?
edit: some people are reporting that the charger only charges at 0.5A instead of the full 1A on [some] android devices. if you have the charger, can you confirm your nexus charges at the full 1A watts
Click to expand...
Click to collapse
Same one.
Good question on whether it's putting out a full 1A. I guess what I do is check the charge times tomorrow with a few different 1A chargers to see if it measures up.
I use this for home:
http://www.amazon.com/Cellet-Charger-Retractable-Cable-myTouch/dp/B004XVM1T0
And this for the car:
http://www.amazon.com/Griffin-Powerjolt-Dual-Universal-Micro/dp/B0042B9U8Q
Both are dual-USB and put out 1amp. Charges my GNEX and iPhone 4 (work) at the same time without issues.
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I've read that the wall charger drops the battery down to 90ish % after it hits 100% and just goes between the two levels until you unplug your charger
While a USB charge is slower and charges your device up to a "fuller" charge
...I may be unfathomably wrong though
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
man that little Apple charger is so damn cute ... lol , ill probably end up buying it once the 1A volt charge is confirmed
edit: just bought it lol, oh well.. it will probably maybe more or less somewhat possibly work like it should at 1A :}
assisterah said:
Just feel like to chime in here for another question.
I know typical USB port from a PC outputs 0.5A while the wall charger outputs 1A, so besides charging time, is there any particular advantages to use wall charger over USB from PC?
I've read somewhere else states that despite the longer charging time using a USB port from a PC, it provides more thorough charges hence is better for the battery than using a wall charger, is this true?
Thanks!
Click to expand...
Click to collapse
I'm not an expert on the subject but I was under the impression that cycles (charge + discharge) were a bigger factor on battery life than something like this. The longer a current is running through the battery (charge or discharge) is detrimental to it's life span.
Leaving a laptop plugged in all the time ruins its battery is my source on this one. I would say it's because it has a constant charge running through the battery.
qreffie said:
I've been doing fine with just plugging it into my computer like I always do with every other phone.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That takes a lot longer vs plugging it into the wall
rashad1 said:
That takes a lot longer vs plugging it into the wall
Click to expand...
Click to collapse
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
[hfm] said:
True dat. Unless it has changed , USB only outputs 500mA.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
500mA is the max before the PC will disable the port. So your actually get less current.
There are some ports, depending on the motherboard that have a option of outputting more power for charging devices, and also have the port powered when the computer is off. But a normal usb 2.0 port is limited to 500mA max per spec... so a normal usb 2.0 port charging a phone is drawing less then 500mA, or it would get and over current condition and disable the port.
I design electronics and work with USB and batteries often, so let me clear some stuff up in no particular order:
- PC ports are limited to 500mA so will only ever output a max of 500mA
- You can use a wall charger that outputs 1000mA but on most devices the data pins on the micro USB need to be shorted to tell the phone it can try to draw more than 500mA. This is true for HTC devices for example. That means if you get a cheap charger that doesn't short the data pins, when you plug your standard micro-usb cable into it, it will still only charge your phone at 500mA.
- The charging controller is actually in the phone. It decides based on temperature (there's a sensor in the battery), current, voltage across the battery (current charge) and characteristics of the type of battery to figure out how much current to allow into the battery. Although its true that a 500mA charger may have different affects than 1000mA chargers, there usually is very little perceivable difference. Which is (slightly) better really depends on the charging controller and how it decides when to stop charging.
- When the battery is full, the phone continues to 'trickle charge' for a period of time. This isn't a bad thing. Overcharging a Lithium battery can be extremely dangerous, so normal charging occurs at a high speed and then slows down at a safe limit below the 'true' 100%. After that the phone continues to trickle charge to top up the battery. This is the reason you read in phone manuals you should charge the phone for 8 hours or overnight for its first charge.
- When charging at 500mA, the battery does not get as hot. This usually means you get closer to the true 100% before 'trickle charging' starts. With a 1000mA charge the battery heats up a lot more so charging may switch to trickle much sooner. Here's an example with made up figures.
Lets say you charge your battery with a 500mA charger, and it takes 2 hours. When the phone shows 100% it may actually be at 99%, and trickle charging. Leaving it for another 30 mins may take it to its full capacity.
Now, lets say you charge your battery with a 1000mA charger, and it takes 1 hour. When the phone shows 100% it may actually be at 98%, and trickle charging - It stopped sooner because the battery was hotter. Leaving it for another 30 mins may take it to full capacity.
Conclusion.. the 500mA charger took 2.5 hours, while the 1000mA charger took 1.5 hours. However if you unplugged both when the phone showed 100%, the 500mA charged battery may last longer, and so you think the 500mA somehow resulted in a more thorough charge!
At the end of the day, it doesn't matter which you use. the absolute charge cycles is what counts. Charge to 100%, then dont charge till its 0 for best battery care. Constantly plugging into a charger or dock all day on and off is bad. But having said that, your phone is there to be used, so a sensible balance of the two is the best bet.
Thank you so much for the detailed response, kam187. Would you recommend avoiding using a 5.1V charger, considering the phone came with a 5V charger?
Sent from my Galaxy Nexus using Tapatalk
I wouldn't use it. The 0.1v probably won't make any difference, but it may not be regulated. Chargers with these odd values sometimes don't have any regulator inside them. That could damage your phone as the voltage could shoot up and down as the current draw changes.
Just search amazon/ebay for any MicroUSB charger, and pick one from a reputable manufacturer like Motorola, HTC, Samsung etc. Since all phones now use MicroUSB, there's loads of these chargers around from previous phone models etc.
Here's just one I saw on amazon.com:
http://www.amazon.com/Samsung-Trave...E70I/ref=sr_1_3?ie=UTF8&qid=1322808220&sr=8-3
The original Samsung charger outputs 5V---1000ma, I have an extra blackberry micro usb charger that outputs 5V---750ma.
I want to use my old blackberry charger in my office, will this different current output affect my battery long term or short term?
edlivian said:
The original Samsung charger outputs 5V---1000ma, I have an extra blackberry micro usb charger that outputs 5V---750ma.
I want to use my old blackberry charger in my office, will this different current output affect my battery long term or short term?
Click to expand...
Click to collapse
One of the immediate side effects will be that your phone will take a longer time to fully charge your battery.
If I helped you out in any way please thank me. Thanks.
Not sure how the blackberry chargers are. I know some of the Motorola chargers are accepted by the phone for high current charging (any charger that doesn't puts the phone in low current mode).
I charge my phone every night on my old 700mah Samsung charger and while it does take longer youd hardly notice unless you were trying to get as much charge in say an hour as possible. So as long as the phone doesn't limit it you should be good. <500mah is very noticeable.
I know it will take longer to charge. But Im not as familiar with appropriate charging output for li-ion as i am for ni-mh Sanyo eneloops for example that ideally should be charged at 220ma to maximize cell life.
edlivian said:
I know it will take longer to charge. But Im not as familiar with appropriate charging output for li-ion as i am for ni-mh Sanyo eneloops for example that ideally should be charged at 220ma to maximize cell life.
Click to expand...
Click to collapse
The rule still applies the less current used to charge the better the lifespan. The phone was paired with a battery with the intention of using a 1 amp charger. The phone will only allow high current charging mode if it thinks the charger is Samsung. Shorting the data pins is a way to fool it and many aftermarket chargers already do this.
With your phone on and the phone in low current mode (320 mah i believe) you will have a hard time charging the phone if anything is wake locking the phone even screen off. You will even have trouble charging and using the phone at 500mah depending on whats going on.
The phone will be eating some amount of power from the charger, the battery is not always seeing as much current as you might think. I always stick by the practice of not deep discharging it, LiION would rather be topped off then not charged (geeze remember NiCad laptop batteries.... lol). I feel this battery will be the shortest lifespan of any phone or laptop I have ever had. Just due to how much use it sees.
Charger
Any micro usb charger should work. I've had a dozen or so different gadgets that all use micro usb from Blue Tooth headsets, to speakers. I use all chargers interchangeably with one noteable exception. My wife's Nook Tablet will only charge using the provided Nook charger. Found that out the hard way.
I have also found that not all micro usb cables will provide data transfer for all phones. I'm guessing different pin-outs? For instance when I was trying to root my ET4G, I forgot my OEM cable at home so I tried to use my EVO cable. That dind't work well at all.
My old blackberry chargers seemed to work fine but I started seeing some strange jumping around of the battery while using. For instance it would all of a sudden jump up to 100% charged then if I unplugged and plugged back in it would go back to 70% or whatever. I went back to only samsung or just charging off usb. I use my pc, printer, cable box etc to charge my phone.
I charge mine with either the stock charger that came with my E4GT, or an old 700MAh charger that came with my old Samsung Rant. Occasionally I use the charger that came with my HTC Evo 4G. I really can never tell a difference. Although, like someone above said, it seems as if non-Samsung usb cables will not charge when plugged into a computer. That's how it is with the HTC cable, and I've also tried an LG usb cable and got the same results.
Sent from my SPH-D710 using XDA
BBJon said:
I have also found that not all micro usb cables will provide data transfer for all phones. I'm guessing different pin-outs? For instance when I was trying to root my ET4G, I forgot my OEM cable at home so I tried to use my EVO cable. That dind't work well at all.
Click to expand...
Click to collapse
Really? I rooted and always use Odin using an HTC cable...
EggosEvo said:
I charge mine with either the stock charger that came with my E4GT, or an old 700MAh charger that came with my old Samsung Rant. Occasionally I use the charger that came with my HTC Evo 4G. I really can never tell a difference. Although, like someone above said, it seems as if non-Samsung usb cables will not charge when plugged into a computer. That's how it is with the HTC cable, and I've also tried an LG usb cable and got the same results.
Click to expand...
Click to collapse
I had the exclaim, the replacement to the rant and thats where my 700mah charger came from.
All of my other Micro USB cables except the one are non samsung and I use them all for charging, data and they charge while connected to pc. But none of them are from other phone manufacturers or anything. The Micro USB spec is what these phones are using there is no difference.
The difference that matters most of the time is tolerances. Its easy to end up with cables that will work well in one port but not another. The rest of the cable may also be out of spec and not work well or at all for certain purposes.
I've ruined two batteries because of non-OEM chargers on the ET4G. (Actually, ruined two, and made a third battery just render terrible performance.) I definitely don't have the problem with other devices I own, and it's definitely happened with two separate ET4G's I've owned.
So, "be very careful using alternate chargers" is all I would advise.
Sent from my SPH-D710 using xda premium
Please correct me if I'm wrong but isn't electricity the same no matter the source?
If the phone is looking to pull 1A and your charger is rated for .7A I'd be worried about the charger not the battery, which technically is a cell not a battery.
Tolerances were mentioned before and I think that is most of the problem with certain cables working fine for some people and not others. All connectors and cabling are supposed to meet the USB spec and many cheap ones don't. Also the supposed 10,000 insertion rating for micro USB is a bit optimistic imo. I replace cables after a couple months max because of loose connections.
Sent from my SPH-D710 using XDA
dberend said:
Please correct me if I'm wrong but isn't electricity the same no matter the source?
Click to expand...
Click to collapse
Not really because these chargers are doing AC to DC conversion and voltage regulation is a huge factor in its job. With a bad charger design not only can charging be affected, possibly even hurt the battery. Since the phone will consumer charger power to run while on the charger the phone can become unstable. Not talking a defective charger, just bad and cheap designs.
dberend said:
If the phone is looking to pull 1A and your charger is rated for .7A I'd be worried about the charger not the battery, which technically is a cell not a battery
Click to expand...
Click to collapse
I think about that alot actually. Coming from PC power supplies you never want to overload the unit. But I know for a fact I have devices that demand more from chargers than can be given, and do not have the low current and high current modes like this phone.
I am no electrical engineer and am only familiar with AC to DC and DC to AC circuits and various voltage regulation techiniques. But it is possible to current limit as well right? You design a half amp charger, with the data pin short to put the Samsung into high current. You limit the current to 500 mah but over build the components just a little to increase lifespan.
Anyways, I bought a 2.1 Amp RCA wall charger from walmart last night on a wim. 9 bucks, might come in handy when i get a tablet. Has a 1 Amp side and a 2.1 Amp thats shared with the 1 Amp. Phone didn't show any ill will to it and I had my Schosche GoBatt on the 1 amp end. If the phones drawing too much current could be bad in the long run but its working so far. Charged at the normal speed of the stock charger.
RainMotorsports said:
Not really because these chargers are doing AC to DC conversion and voltage regulation is a huge factor in its job. With a bad charger design not only can charging be affected, possibly even hurt the battery. Since the phone will consumer charger power to run while on the charger the phone can become unstable. Not talking a defective charger, just bad and cheap designs.
Click to expand...
Click to collapse
I agree with you on bad and cheap designs. How many tv's and other electronics have been rendered useless by a few substandard capacitors that saved the manufacturer $.02 per unit?
I try not to use any charger that doesn't have HTC, Samsung, etc on the label. I figure if they were willing to back it warranty wise for the original device it should put out clean enough power.
I'm far from being engineer but I do quite a bit of hardware hacking and learned a little bit about electronics when I was at Ft Gordon. So I'm not completely lost around a multimeter
I would imagine that there is some protection built into the charging circuit of the phone itself. How effective or what kind of tolerance Idk suppose I could look for datasheets if anybody really cares.
Sent from my SPH-D710 using XDA
Hi everyone,
I have a problem with my original wall charger that came with the phone. There seems to be something wrong between the cable and the connector you are plugging into the phone. I need to have the cable in a specific position for the phone to be able to recharge.
The question is, is there any better charger than the original samsung one? I could probably get it replaced as it still is in warranty, but I don't like how slow it recharges the phone. If I am running a 3D game the phone is slowly DISCHARGING even when plugged in to a wall charger.
I noticed the charger has only 500-700 mA output. I had an older htc charger which had 1000 mA output. Would a charger like this recharge my phone faster? I have seen some posts about non-samsung chargers not being able to recharge the battery fast as there is some kind of protection built into the phone.
I would also consider buying a wireless charger if it was available for a reasonable price.
Are you all using the stock chargers?
Thanks in advance for any help.
you can read this thread: http://forum.xda-developers.com/showthread.php?t=1721677&highlight=charging
Just to make sure it is the charger's fault, does the phone charge normally if connected to a computer, from the USB port?
Thanks for the link.
Yes, phone charges and transfers data from USB without any problem, so it should be fault on the charger.
Reading through that thread, I guess there is no point in buying a more powerful charger.
as i said there, i use a nokia 1200mAh charger and the charging time is more than 2 hours, so we have to deal with it. The thing you should care of is the quality of the charger to avoid the touchscreen known problems
Imho you don`t need better (more powerfull) charger because of the hardware limitations. What you should do is to try any other microUSB charger just to see if that solves your problem. So if any of your friends of family have other samsung or nokia etc. phone, thats charging with microUSB, plug it into your phone to see if it solves your problem. You will know what to do next if it does
al3x_xct said:
as i said there, i use a nokia 1200mAh charger and the charging time is more than 2 hours, so we have to deal with it. The thing you should care of is the quality of the charger to avoid the touchscreen known problems
Click to expand...
Click to collapse
how do I check the quality of the charger?
I was thinking about putting a new receptacle with USB and one outlet somewhere on my kitchen counter. Problem is the two better companies have two very different amperage's. Cooper is .7a and Leviton is 2.1a, both have two USB ports and one outlet. The charger for our E4GT is 1a and I also have a Galaxy Tab 10.1 that would need the higher amp version, but many have said to NOT use a higher amp charger than the one our phones came with, which is 1.
So what do you think? Is it really that bad for our phones/battery to charge it using a higher amp source? I know our charger cube is small but I also need it in various locations at home or at the office so having an outlet like this in my kitchen would be awesome.
I hate how slow USB charges our phones, so I assume .7 would still be kinda slow and not charge my tablet either.
http://www.amazon.com/Cooper-Wiring-Devices-TR7740W-K-Combination/dp/B007NC5GI4
http://www.amazon.com/Leviton-T5630...F8&qid=1350409796&sr=1-1&keywords=leviton+usb
My vote is for the 700. It will be better for your batteries over time.
Interesting thing that I have learned is that the Leviton version only pushes the higher amps on one of the USB ports. There is no where that states how much the one that gets less does though and I have read that if you plug in a device that does not need the extra amps that USB somehow puts out less amps and it charges slower.
I need to do more investigating though.
revamper said:
My vote is for the 700. It will be better for your batteries over time.
Click to expand...
Click to collapse
I agree to an extent.
I feel that it really depends on how long you keep your usb charged devices. Battery degradation may not be an issue if you upgrade often or are the type that never has anything older than the 2nd, sometimes 3rd, newest model device on the market. Also, a lot of the newer devices require higher amps to charge at a reasonable time. This transitions into charging habits. On the 0.7A charger, you may find yourself leaving devices on chargers over night potentially hours longer after fully charging. This is arguably also damaging to the battery.
Either way you go, you may find yourself with a bunch of 6' microUSB cables from devices taking forever to charge or battery degradation. :silly:
Your phone is only going to use as many amps as it can. Say a GS2 charges at 450ma USB and 650ma AC. The phone will recognize if its USB or ac and allow it to charge according to that. Its not going to charge faster on a 1a charger unless you root your phone and hack those parameters. Doing that is what will cause battery life problems, if not cause a complete failure of the battery and/or the device.. The higher you you set the charging amperage, the more likely you are to have problems.
And phones now (especially any model of GS2) have circuitry to prevent overcharging. Leaving your phone charging overnight is not going to cause any problems.
I don't know if USB wall outlets act like USB or a/c (think about a USB cable with a wall adapter) but plugging into the USB outlet and checking in the battery info in the settings menu or a battery app can tell you.
Sent from my SGH-I777
What's next wireless charger outlets?
Get the higher-amperage Leviton.
Your device will only draw the amps it needs. The GS2 will draw < 1amp. But if you have a big tablet, they can pull the full 2.1 amps.
Since you're doing a 'permanent' wall installation, you're somewhat future-proofing yourself.
Good info, thanks all. I did not know that our phone will only pull the amps it needs, so that is good to know. I may get the higher amp version because I have a Galaxy Tab 10.1 that needs higher amperage.
I have my 3rd gen iPad charger which says it's 2.5A.
Will using this charger harm the battery at all?
Also, are all micro USB cables safe to use with charging? What I want to know is whether different cables provide the same function with regards to charging.
Beamed from Jupiter on my Galaxy Note II
Yes, it is safe. The 2.5A rating means the charger is capable of supplying up to (at least) 2.5A. If the Note requires less, that's not a problem.
As for USB cables, considering the relatively high current the Note can take, lower quality (as in thin or not properly soldered) or long cables may cause a voltage drop severe enough that the phone may not be able to charge or may take longer to get a full charge.
Yep, had a 2.5 year old Samsung Galaxy S cable in it connected with usb on my computer, turned the phone off, 4 hours later -> +5% lol.
Cool which brings me to my next question.
Is not possible to obtain chargers with insane Amps?
So my Note 2 charges faster?
Beamed from Jupiter on my Galaxy Note II
Think of the phone and the charger as, say, a small lamp, a washing machine and your home's electric sockets. You should have a good enough electric circuit that allows a washing machine to be be connected. Doesn't mean if you connect a lamp to the same socket, it will consume as much as a big machine.
A charger capable of many more amps would not help at all with charging faster. The phone's circuit asks for 2A or, probably, quite less, and that's all it gets. Even you had a charger capable of giving 10A.
Besides, chargeing the battery at a higher current than what it's designed for would be a very bad idea. The battery wouldn't last very long.
mg35pt said:
Besides, chargeing the battery at a higher current than what it's designed for would be a very bad idea. The battery wouldn't last very long.
Click to expand...
Click to collapse
The resulting fire might, though!
The charger is just a "stupid" supplier. The charging circuitry within the phone provides the "intelligence" that charges the battery in the best way possible. As mg35t says, the charger can handle 2Amps if the unit it charges calls for it, but I doubt it uses the full current in this case, probably 1.2-1.6 when it charges at full current.
Modern chargers usually have built-in current limiters. That is why you can use a older and smaller charger without breaking it, with the cost of slower charging. All phone-brands agreed to use micro-USB, well, except the obvious iPhone who just "must" have a own system, otherwise they would follow the "spirit of Apple" I guess