Develop Bugs

HOX Soft Brick

I have, unfortunately, soft bricked my phone and need a bit of advice in loading the new RUU.
I am trying to flash the stock RUU : RUU_ENDEAVOR_U_ICS_40_S_hTC_Asia_WWE_2.14.707.3_Radio_2.1204.123.18_release_270370_signed
rom.zip shows the following
Code:
modelid: PJ4610000
cidnum: HTC__044
mainver: 2.14.707.3
hbootpreupdate:12
RadioVer: 2.1204.123.18
erasebcid: 1
delgpt: 1
delcache: 1
my phone shows the following:
Code:
INFOversion: 0.5a
INFOversion-bootloader: 1.36.0000
INFOversion-baseband: 5.1204.162.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.14.707.24
INFOserialno: XXXXXXXXXX
INFOimei: XXXXXXXXXXX
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__044
INFObattery-status: good
INFObattery-voltage: 4106mV
INFOdevpower: 100
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
the modelid and cidnum match , but the mainver and hboorpreupdate do not.
My hboot version is 1.36, which i believe was updated with the JB OTA update. I'm using stock recovery and bootloader has been relocked.
When trying to apply the above RUU I get the following error:
bootloader version error
Mind you it was still able to wipe my phone (including all my clockwork backups )

Is your phone HTC-dev unlocked

Whitecookie said:
Is your phone HTC-dev unlocked
Click to expand...
Click to collapse
Sure is

You can't flash an older RUU.

If you need to run RUU, you need RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe
You can get if from HERE or HERE

Base on your hboot version i assume u are already on Jb. But the ruu u try to flash is ics ruu. Try to find jb ruu.
Sent from my HTC One X using xda premium

try this first
Try asking someone for the stock Backup of ur Software version its so much easier to do

ckpv5 said:
If you need to run RUU, you need RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe
You can get if from HERE or HERE
Click to expand...
Click to collapse
Flashed and back up and running, I can't thank you enough!

bankai8003 said:
Flashed and back up and running, I can't thank you enough!
Click to expand...
Click to collapse
NP enjoy your HOX

Cheers mate
Sent from my HTC One X using xda premium

[Q] need RUU for htc one v

Hi,
I've actually downloaded an app called FONT INSTALLER and when i installed one of the fonts and rebooted...It got stuck on the htc one logo so i thought of reflashing stock rom but i need the RUU for my phone...
Here's my phone information:
INFOversion: 0.5
INFOversion-bootloader: 1.18.0000
INFOversion-baseband: 3831.19.00.120
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.23.415.1
INFOserialno: HT25MTV00301
INFOimei: 351816056205630
INFOproduct: primou
INFOplatform: HBOOT-7230
INFOmodelid: PK7610000
INFOcidnum: HTC__J15
INFObattery-status: good
INFObattery-voltage: 3794mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 8591a55c
INFOhbootpreupdate: 12
INFOgencheckpt: 0
all: Done!
ITS AN EMERGENCY
Sent from HTC one V

walidatef97 said:
Here's my phone information:
INFOversion-main: 2.23.415.1
Sent from HTC one V
Click to expand...
Click to collapse
RUU_PRIMO_U_ICS_40A_HTC_ARA_2.23.415.1_Radio_20.76.30.0835U_3831.19.00.120_release_276387_signed.exe

Thanks for the reply
I've downloaded the RUU and followed the steps but unfortunately it gave me error (155)...Am I dong something wrong????

walidatef97 said:
Thanks for the reply
I've downloaded the RUU and followed the steps but unfortunately it gave me error (155)...Am I dong something wrong????
Click to expand...
Click to collapse
1- in fastboot mode - relock the bootloader : run command fastboot oem lock
2- in fastboot mode - flash/run/double click the RUU; follow the updater instruction - next,update,bla,bla,bla until it finish

Thnx a lot for these instructions, now my htc one v is running normally
Sent from my HTC One V using xda app-developers app

hboot comaptible

I'm problably one in hundreds with and old hboot (and no chance to update from htc oficially).
So, I was thinking, if all endeavoru HOX have the same hardware, is there a chance to use any hboot (or a compatible one) on any device??
I mean, my HOx is CID bstar301, version-main 2.17.513.2, but as far as I see, I'm doomed to remain in hboot 1.12, and I was wondering if there is a chance to update my hboot using some similar, or maybe compatible one...
Code:
$ sudo fastboot getvar all
INFOversion: 0.5a
INFOversion-bootloader: 1.12.0000
INFOversion-baseband: None
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.17.513.2
INFOserialno: SH28LW103512
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: BSTAR301
INFObattery-status: good
INFObattery-voltage: 3807mV
INFOdevpower: 42
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
all: Done!
Does anyone knows if there is a chance of doing this? (without brick my phone)

I don't have any idea

Thant said:
ok inside the firmware you must to see one file android-info.txt open this file and see what CID is writen inside!
Click to expand...
Click to collapse
Code:
modelid: PJ4610000
cidnum: BSTAR301
delcache: 1

No way to use another firmware if you don't have S-OFF HOX you must to wait for offical update
And this question is answeared in this thread http://forum.xda-developers.com/showthread.php?t=2159274

need help !!!

---alpharev---
INFOversion: 0.5
INFOversion-bootloader: 6.93.1002
INFOversion-baseband: 5.11.05.27
INFOversion-cpld: None
INFOversion-microp: 051d
INFOversion-main: 2.29.405.5
INFOserialno: HT0xxxxxxxx
INFOimei: 3538330xxxxxxx
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 3703mV
INFOpartition-layout: Generic
INFOs.
----------------------
my htc stuck on htc logo with 4 exclamation marks in the corners of mobile and when i try to install a stock rom, it stopped with an error and telling me that :
error [110]: error opening file
Utility update of the Rom can not open the requested files or the files are damaged. the RUU can not continue the update.
Please get a complete RUU package and try again.
i tried with these two stock roms and the result was the same:
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed
RUU_Brav2_UK_1.20.207.1_Radio_32.36.00.28U_4.06.00.02_2_release_124865
--------------------
anny help please !!

boucheboura said said:
---alpharev---
INFOversion: 0.5
INFOversion-bootloader: 6.93.1002
INFOversion-baseband: 5.11.05.27
INFOversion-cpld: None
INFOversion-microp: 051d
INFOversion-main: 2.29.405.5
INFOserialno: HT0xxxxxxxx
INFOimei: 3538330xxxxxxx
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 3703mV
INFOpartition-layout: Generic
INFOs.
----------------------
my htc stuck on htc logo with 4 exclamation marks in the corners of mobile and when i try to install a stock rom, it stopped with an error and telling me that :
error [110]: error opening file
Utility update of the Rom can not open the requested files or the files are damaged. the RUU can not continue the update.
Please get a complete RUU package and try again.
i tried with these two stock roms and the result was the same:
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed
RUU_Brav2_UK_1.20.207.1_Radio_32.36.00.28U_4.06.00.02_2_release_124865
--------------------
anny help please !!
Click to expand...
Click to collapse
Try this RUU
http://www.htcdev.com/process/legal_download/152

abaaaabbbb63 said:
Try this RUU
http://www.htcdev.com/process/legal_download/152
Click to expand...
Click to collapse
thanx, i ll try and i ll tell you.

now it's S-ON
INFOversion: 0.5
INFOversion-bootloader: 1.02.0001
INFOversion-baseband: 5.11.05.27
INFOversion-cpld: None
INFOversion-microp: 051d
INFOversion-main: 2.29.405.5
INFOserialno: HT0xxxxxxxx
INFOimei: 3538330xxxxxx
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 3732mV
INFOpartition-layout: Generic
INFOs

boucheboura said said:
now it's S-ON
INFOversion: 0.5
INFOversion-bootloader: 1.02.0001
INFOversion-baseband: 5.11.05.27
INFOversion-cpld: None
INFOversion-microp: 051d
INFOversion-main: 2.29.405.5
INFOserialno: HT0xxxxxxxx
INFOimei: 3538330xxxxxx
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 3732mV
INFOpartition-layout: Generic
INFOs
Click to expand...
Click to collapse
it doesn't boot?
Ok. In my sig you will find the 2.3 RUU as a PB99IMG. Take the pb99img.zip, put it directly on your sd-card, so the path to it is sdcard/pb99img.zip. Then boot in hboot and select yes.

abaaaabbbb63 said:
it doesn't boot?
Ok. In my sig you will find the 2.3 RUU as a PB99IMG. Take the pb99img.zip, put it directly on your sd-card, so the path to it is sdcard/pb99img.zip. Then boot in hboot and select yes.
Click to expand...
Click to collapse
RADIO_V2 _Fail.PU

boucheboura said said:
RADIO_V2 _Fail.PU
Click to expand...
Click to collapse
That's a radio brick.

abaaaabbbb63 said:
That's a radio brick.
Click to expand...
Click to collapse
no solutions?

boucheboura said said:
no solutions?
Click to expand...
Click to collapse
I'll quote myself on this one:
abaaaabbbb63 said:
The Fail_PU is sign of a radio brick. A radio brick is difficult to overcome. Few phones get rescued from this state.
First, try the 2.3 RUU a couple of times:
http://www.htcdev.com/process/legal_download/152
If it doesn't work, try putting the phone in the freezer for 10 minutes with the battery taken out, and then imediatelly try the RUU.
If those don't work, then you will have to try to flash a lot of wwe RUUs from here: http://www.shipped-roms.com/?category=android&model=Bravo
Good luck!
Click to expand...
Click to collapse

abaaaabbbb63 said:
I'll quote myself on this one:
Click to expand...
Click to collapse
thanx alot for being with me, i ll tell u the resut at the end.

[q] "how to back to stock kitkat fot desire 816- a5ul cid622"

NEED ROM FOR:
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 1.101.1102.17.0506
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: SH45PWW01323
INFOimei:
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a5_ul
INFOplatform: hTCBmsm8226
INFOmodelid: 0P9C21000
INFOcidnum: HTC__622
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: be7179e5
INFOhbootpreupdate: 11
INFOgencheckpt: 0

find backup and restore

That is the problem, i cannot find the right backup for my phone that match my phone by cid by region, so i cannot get OTA....

Guys i have flashed stock lollipop and mine wifi didn't work which is a common problem for everybody who flashed lollipop without getting it via OTA... so i need the right stock kitkat backup for my model so i could back to stock and receive lollipop via ota, can anybody help somehow????
:'(
INFOproduct: a5_ul
INFOcidnum: HTC__622

Can anybody post ota update for lollipop for htc desire 816 cid_622 a5ul asia? i need firmware.zip from it to fix my wifi ? thanks

I'm stucked up on SIM-1, SIM-1 is not working after flashing CM-12 as well as Kitkat CWM backup from XDA. Anyone have solution for SIM-1 not working?