Relocked bootloader + bad modelid - T-Mobile HTC One (M8)

I've recently purchased a CDMA + GSM compatible verizon M8 which I am using on T-mobile. Right off the bat I rooted, s-off with sunshine, intalled TWRP and Ive been running viper m8
I have attempted to flash new firmware and change my model id per scotts toutorial, but this is the model id that comes up: ������������ modelid: tpms:tpms:-:ukonoto
Also, my bootloader says "relocked" and I cannot access recovery (twrp) even though i reinstalled it.
Any help would be great!!

Related

[Q] How do I update my second hand HTC One M8?

Hi
Bricked my old 16gb HTC One M8 - sending to HTC for repair tomorrow.
Ordered a replacement 32gb HTC One M8 from Hong Kong. It was billed as 'new' but on arrival it appears to be S-OFF but locked. Full bootloader details below:
*** LOCKED ***
M8_UL_CA PVT SHIP S-OFF
CID-11111111
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA13G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.401.5
eMMC-boot 2048MB
Mar 22 2014,00:53:32.16037
Whenever I try to update OTA, it tells me my phone is not stock and the update doesn't install. I just want to get the phone back to stock with the latest OTA firmware, nothing more. What would my best course of action be here?
I'm no expert but I did purchase a used M8 last week with similar status, which was able to return to (almost) stock.
First, I think your super cid (11111111) is stopping you from any OTA update. Change that to reflect your carrier.
If you are still not able to check for OTA update after that, you need to unlock the bootloader, install TWRP or CWM boot loader, and flash a backup of stock Rom from your carrier.
billyboy77 said:
Hi
Bricked my old 16gb HTC One M8 - sending to HTC for repair tomorrow.
Ordered a replacement 32gb HTC One M8 from Hong Kong. It was billed as 'new' but on arrival it appears to be S-OFF but locked. Full bootloader details below:
*** LOCKED ***
M8_UL_CA PVT SHIP S-OFF
CID-11111111
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA13G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.401.5
eMMC-boot 2048MB
Mar 22 2014,00:53:32.16037
Whenever I try to update OTA, it tells me my phone is not stock and the update doesn't install. I just want to get the phone back to stock with the latest OTA firmware, nothing more. What would my best course of action be here?
Click to expand...
Click to collapse
M8_UL_CA. You are on AT&T, correct?
You can download the latest AT&T RUU here.
Download it onto your PC. Hook up your phone and open command prompt. Direct it to your ADB folder, then enter these commands.
adb reboot bootloader
fastboot reboot-bootloader
fastboot rebootRUU waiting for it to boot after each command.
Then run the RUU download by double clicking on the download, and follow the prompts given.
You will have to run it twice. The first time will not install the whole package, the second time finishes the process. This is normal.
xunholyx said:
M8_UL_CA. You are on AT&T, correct?
Click to expand...
Click to collapse
I'm not with AT&T. I bought the phone carrier unlocked - I use a Three mobile SIM. If the phone has been made S-OFF and carrier unlocked then I'd like to return it to a stock unlocked model if possible...
ikeny said:
I'm no expert but I did purchase a used M8 last week with similar status, which was able to return to (almost) stock.
First, I think your super cid (11111111) is stopping you from any OTA update. Change that to reflect your carrier.
If you are still not able to check for OTA update after that, you need to unlock the bootloader, install TWRP or CWM boot loader, and flash a backup of stock Rom from your carrier.
Click to expand...
Click to collapse
Hi - I don't have a carrier - I bought the phone on its own, supposedly carrier unlocked, using an existing Three mobile SIM that I have.
Does anyone have any suggestions for a suitable SuperCID I could try?
Super cid (11111111) means you can flash any rom manually, but no OTA update.
If you want OTA updates, you either pick a carrier and use its cid, or use the GPE (Google play edition) cid. GPE means no HTC added stuffs, like sense 6.
Either way, Google for the cid numbers.
ikeny said:
Super cid (11111111) means you can flash any rom manually, but no OTA update.
If you want OTA updates, you either pick a carrier and use its cid, or use the GPE (Google play edition) cid. GPE means no HTC added stuffs, like sense 6.
Either way, Google for the cid numbers.
Click to expand...
Click to collapse
My last phone was a stock HTC which I converted to GPE. I got fed up with the phone and tried to revert to stock, but messed up. While HTC fix that one I'm trying to update this replacement... getting a bit fed up with non stock HTC phones now to say the least!
Will changing my CID to something like HTC__001 and rebooting risk bricking the phone?
My HTC M8 also has S-off, and I have no problem changing the cid to whatever I want with the toolkit on xda.
Running OTA updates, on the other hand, is more risky to me since I didn't know the history of my device. I chose to flash a nandroid backup via TWRP. (No RUU published from my carrier). Then I re-rooted the stock rom, retuned back to stock recovery, removed the "modified/tampered" status, and locked the boot loader. I left the S-off status, which is the only non-stock.
billyboy77 said:
My last phone was a stock HTC which I converted to GPE. I got fed up with the phone and tried to revert to stock, but messed up. While HTC fix that one I'm trying to update this replacement... getting a bit fed up with non stock HTC phones now to say the least!
Will changing my CID to something like HTC__001 and rebooting risk bricking the phone?
Click to expand...
Click to collapse
The guy that sold me the phone suggested I flash this RUU to the phone. It appears to be a Brighstar US RUU... which just confuses me even more.
"i have find a way to fix your problem, its very simple, but requires your attention to the following details
follow what this link tells you
http://www.htc.com/us/support/htc-one-m8/news/"
What did you ask from the seller? Was it just something "stock and unlocked"? The US rom quote was definitely stock. (Sim) unlocked or not is independent of the rom. Your phone could be locked/unlocked regardless of the rom you use.
All unmodified version from HTC are stock, including GPE. You need to first decide which carrier you want your phone to be "stock" for.
billyboy77 said:
The guy that sold me the phone suggested I flash this RUU to the phone. It appears to be a Brighstar US RUU... which just confuses me even more.
"i have find a way to fix your problem, its very simple, but requires your attention to the following details
follow what this link tells you
http://www.htc.com/us/support/htc-one-m8/news/"
Click to expand...
Click to collapse
I've just spoken to someone in HTC USA Customer services - the phone is formerly an AT&T contract phone. She told me that I'm better off returning the phone to the seller if I want regular OTA updates.
So either send it back and be without phone for a week or so, or try and return it to factory stock myself. Tricky one.
ikeny said:
What did you ask from the seller? Was it just something "stock and unlocked"? The US rom quote was definitely stock. (Sim) unlocked or not is independent of the rom. Your phone could be locked/unlocked regardless of the rom you use.
All unmodified version from HTC are stock, including GPE. You need to first decide which carrier you want your phone to be "stock" for.
Click to expand...
Click to collapse
OK so in theory, I could change the CID to Three UK, and find a Three UK RUU and convert the phone into a stock unlocked three UK one that works with my sim...?
billyboy77 said:
OK so in theory, I could change the CID to Three UK, and find a Three UK RUU and convert the phone into a stock unlocked three UK one that works with my sim...?
Click to expand...
Click to collapse
It looks like my best/safest option is installing the Developer edition RUU - but I am on a mac. Does anyone have the correct Zip file of this?
http://www.htc.com/us/support/htc-one-m8/news/
billyboy77 said:
It looks like my best/safest option is installing the Developer edition RUU - but I am on a mac. Does anyone have the correct Zip file of this?
http://www.htc.com/us/support/htc-one-m8/news/
Click to expand...
Click to collapse
I don't think the ROM update exe will run in Mac. You'll need to find a Windows pc for this, or try virtual machine running Windows on your mac.
billyboy77 said:
It looks like my best/safest option is installing the Developer edition RUU - but I am on a mac. Does anyone have the correct Zip file of this?
http://www.htc.com/us/support/htc-one-m8/news/
Click to expand...
Click to collapse
all the files you need to convert to DE are here >> https://www.androidfilehost.com/?a=show&w=files&flid=21320
This guide may be easier to convert to the DE as it used RUU. No custom recovery and s-off required.
http://forum.xda-developers.com/htc-one-m8/development/ruu-m8-developer-edition-sense-1-54-t2884777
billyboy77 said:
Hi
Bricked my old 16gb HTC One M8 - sending to HTC for repair tomorrow.
Ordered a replacement 32gb HTC One M8 from Hong Kong. It was billed as 'new' but on arrival it appears to be S-OFF but locked. Full bootloader details below:
*** LOCKED ***
M8_UL_CA PVT SHIP S-OFF
CID-11111111
HBOOT-3.16.0.0000
RADIO-1.15.2133156.UA13G
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.54.401.5
eMMC-boot 2048MB
Mar 22 2014,00:53:32.16037
Whenever I try to update OTA, it tells me my phone is not stock and the update doesn't install. I just want to get the phone back to stock with the latest OTA firmware, nothing more. What would my best course of action be here?
Click to expand...
Click to collapse
If you ordered it from Mainland region then most sellers do S Off there even if the phone is new but if you wanted S On you could have talked to the seller. It's trend over there before getting a new android phone almost 90% sellers sells S OFF and Rooted new devices in almost all major Smartphone brands.
Edit: Yes, M8_UL_CA is definitely (AT&T) What country do you belong to? If you're based in the US then just run official HTC AT&T RUU and you will be able to get OTA updates in the near future.
maheshpatel said:
If you ordered it from Mainland region then most sellers do S Off there even if the phone is new but if you wanted S On you could have talked to the seller. It's trend over there before getting a new android phone almost 90% sellers sells S OFF and Rooted new devices in almost all major Smartphone brands.
Edit: Yes, M8_UL_CA is definitely (AT&T) What country do you belong to? If you're based in the US then just run official HTC AT&T RUU and you will be able to get OTA updates in the near future.
Click to expand...
Click to collapse
Actually, it is AT&T, T-Mob, plus Telus and Rogers (Canada, I'm on Telus).
I see he is unbranded(?) now. The first answer was assuming.
 @billyboy77 Your radio version is WWE. Sorry I didn't notice that before.
Download the International WWE RUU here.
You will be able to flash this to get to stock since you are S Off and superCID. It will bring you up to the latest firmware. No need for OTAs. Back up anything that is important to you before running the RUU, because it will wipe your device.
hm... Seems like you guys are really trying your hardest to make this more difficult than it needs to be. Having S-OFF he can practically make his device any device he wants it to be, T-Mobile, AT&T, Unlocked, Developer Edition, surely any GSM based carrier/unlocked version.
What's the problem? Unlock Bootloader, Get a custom recovery, Get Root, Change your MID to the one you want, Change your CID to the one you want, Restore a backup for the one you chose, run OTA's...
"OMG I'm S-OFF and bought unlocked but I can't get OTA's because my phone WAS an AT&T and I'm not on AT&T I'm on Three"
:silly:
BerndM14 said:
hm... Seems like you guys are really trying your hardest to make this more difficult than it needs to be. Having S-OFF he can practically make his device any device he wants it to be, T-Mobile, AT&T, Unlocked, Developer Edition, surely any GSM based carrier/unlocked version.
What's the problem? Unlock Bootloader, Get a custom recovery, Get Root, Change your MID to the one you want, Change your CID to the one you want, Restore a backup for the one you chose, run OTA's...
"OMG I'm S-OFF and bought unlocked but I can't get OTA's because my phone WAS an AT&T and I'm not on AT&T I'm on Three"
:silly:
Click to expand...
Click to collapse
After what happened with my last phone, I'd rather not muck about with unlocking, rooting or any of that balls. Just a stock OS with regular updates will do me just fine (until the new HTC comes out anyway)

Bad model id and relocked bootloader.

Hello all. I'm using a verizon m8 on tmobile (the model i have is CDMA and GSM) I tried to change the modelid to flash new firmware, but I must have done something wrong and now my model ID says "modelid: tpms:tpms:-:ukonoto".
Also, my bootloader now says "relocked" and I cannot access recovery, only fastboot. I have s-off and am rooted
So, I am curious what commands or steps I need to take to fix my model ID, and how can I get my bootloader back to locked as opposed to it saying "relocked" And lastly, what can I do about not having access to my recovery?
Any help would be greatly appreciated. Thanks!!
used sunshine support and jcase helped me out

Help Htc one m8 stuck

Hi I explain my problem. Then I have a HTC ONE M8 with M8_WLV version. Now to install the update to Android 6.0 via fastboot by zip files I changed mid (before I had the MID 0P6B20000 now the MID is 0P6B10000) and cid (HTC__032) but during the installation of the zip file gave me a mistake and now the phone starts up at fastboot. Now I tried again to install the European ruu but it gives me the same problem, I tried the ruu verizon and I did not install because he says that the model id is not compatible and I have also tried installing the sky dragon and viperone (the sky dragon me install but when I go to restart part only in fastboot while viperone crashes to 5% of the installation). Now I do not know what else to try, someone who can help me out? Of course are the S-OFF and unlocked bootloader. Thanks in advance
Oh man ... you have a Verizon CDMA device, you're not supposed to convert it to EU GSM. Both variants have different partition layout ... you may have soft brick it, may have brick its radio and may have hard brick it (but not yet I guess as you still can go to fastboot/bootloader)
Change back the MID to Verizon MID and the CID to Verizon CID and install Verizon RUU. Hopefully you are lucky enough to fix it.

[Help] My HTC M8 Won't Update to Marshmallow, no matter what I try

I recently bought a HTC One M8 running on lollipop 5.0.1. I have tried to flash most of the marshmallow ROMs and RUUs i could find but none works. I think it's due to conflicting hardware/software numbers. On the lower back, the model number says it's the sprint version (0P6B700), but in the bootloader, it says the model is HTC M8_wlv and getvar says model id: 0P6B20000, and cidnum: 11111111 which I think is the verizon version. The phone is S-off, and the bootloader is locked.
Whenever i try to flash an RUU is always says ERROR 155, and flashing a zip via fastboot always ends up in an error.
Help will be much appreciated.
Kharrei said:
I have tried to flash most of the marshmallow ROMs and RUUs i could find but none works. I think it's due to conflicting hardware/software numbers. On the lower back, the model number says it's the sprint version (0P6B700), but in the bootloader, it says the model is HTC M8_wlv and getvar says model id: 0P6B20000, and cidnum: 11111111 which I think is the verizon version. The phone is S-off, and the bootloader is locked.
Click to expand...
Click to collapse
The model ID on the back cover is meaningless (can't be trusted). We often see the back covers replaced by resellers, usually to "remove" a US carrier logo on the back cover. The getvar data is what you need to go by.
m8_wlv means its the Verizon version, which also means its really dangerous to be trying different RUUs while s-off. Reason being, the Verizon version can only use Verizon RUUs. Other M8 RUUs won't work, and may result in a permanent radio brick. So the fact that the other RUUs failed to install, is a good thing in this case.
Kharrei said:
Whenever i try to flash an RUU is always says ERROR 155, and flashing a zip via fastboot always ends up in an error.
Click to expand...
Click to collapse
For the US variants, you need to flash the Marshmallow firmware.zip before you can RUU from Lollipop to Marshmallow. Otherwise, you will get Error 155.

Htc 10 EE eve_001 Uk 2.41.91.31 recovery. s-on and bootloader unlocked.

Could someone tell me where I could find an EE Uk CID (eve_001) 2.41.91.31 RUU for the Htc 10 .I want to unroot the phone but I deleted my twrp backup by accident and have searched everywhere for a compatible RUU.
The phones bootloader is unlocked and it has S-ON
Got it fixed by using HTC__001 twrp Nandroid_2.41.401.41_PMEUHL.zip if anyone is in the same boat
https://androidfilehost.com/?fid=961840155545593695

Categories

Resources