Develop Bugs

ROOT + CWM + ROM (cleaned stock ~ custom) for HCL Me Connect 2.0 Tab V2

ROOT + CWM + ROM (cleaned stock ~ custom) for HCL Me Connect 2.0 Tab V2
WARNING , THESE PROCEDURES WILL MAKE YOUR DEVICE OUT OF WARRANTY AND MAY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK.
Make sure USB Drivers are installed on your PC.
------------------------------------------------------------
X. Rooting Steps:
1. Turn on USB Debugging on Tab
2. Download Vroot on your PC ( Google it or www.mgyun.com/en/getvroot )
3. Run Vroot & Connect your Tab to PC. Vroot will auto detect the device and root it..
------------------------------------------------------------------
XX. Installing CWM
1. Download and install two apps like File Manager with root access and SManager ( Script Manager) for console.
2. Grant root access to both apps.
3. Download recovery and flash from link:
http://www.mediafire.com/download/vf5xy1hb7kb12ha/HCL_Tab_CWM.rar
4. Extact the file (flash_image and recovery.img) on your internal sd card and after extarction, copy both files to root folder named "/dev" using File Explorer(with root access).
5.Enter root shell by running SManager Console.
6. Type the following commands:
Command 1:
chmod 755 /dev/flash_image
Command 2:
/dev/flash_image recovery /dev/recovery.img
( type the command exactly, care for no uppercases, better copy and paste)
6. After entering the command, u will get " recovery successfully updated"
7. Now u have recovery installed, u may boot into recovery by shutting down ur tab and pressing power and volume dowm button together for around 7 secs until logo shows up.
Congrats now u have rooted tab and a custom recovery CWM.
--------------------------------------------------------------------
XXX. ROM ( will update later)
I have not prepared custom rom but instead i have cleaned rom of my tab with all bloatwares and nice UI and launcher ( Screenshot attached) .
You may download the file ( ~ 220 MB ) and restore with CWM recovry by following below steps:
DOWNLOAD LINKS (FILE UPLOADED IN PARTS, DOWNLOAD ALL 3 PARTS BEFORE UNZIPPING):
http://www.mediafire.com/download/8prnbeuybkptnca/clockworkmod.zip
http://www.mediafire.com/download/cq9t74v0pdk4l4k/clockworkmod.z01
http://www.mediafire.com/download/7ukn7psr2byb2cw/clockworkmod.z02
1. First make backup of current rom through CWM.
2. Backup rom on ur pc by switching on the device.
3. Extract the contents of downloaded files into internal sd.
4. Goto CWM Recovery, then format system, format data, format cache and wipe format dalvik cache.
5. Now choose restore option to restore the downloaded clean rom..
WARNING , THESE PROCEDURES WILL MAKE YOUR DEVICE OUT OF WARRANTY AND MAY BRICK YOUR DEVICE. DO IT AT YOUR OWN RISK.

Thanks man i 've successfully installed clock work mod recovery 6.I am waiting for the ROM
Sent from my Connect-2G-2.0 using xda app-developers app

BackupTA
You forgot to mention BackupTA application before doing all of this..
It helps u revert ur phone to the original stock state as if there was never any tweaking..
Great way for not making the warranty void..
Cheers..
---------- Post added at 01:57 AM ---------- Previous post was at 01:52 AM ----------
Oh!!
Here's the link..
http://forum.xda-developers.com/xpe.../tutorial-backup-ta-partition-to-drm-t2234627

rom
waiting for the rom man

connect 2g 2.0
Thank You So much for this wonderful tutorial ,Now i've got CWM working on my HCL me connect 2g 2.0,All the other tutorials on other sites were not working

good work bro but waiting for the rom
Bro i have rooted and installed CWM Recovery by using your tutorial but Unfortunately i have deleted my rom and i have downloaded the stouk rom from the hcl (official website) but it is also in .img , so i can't even flash it throw the CWM Recovery, and if i switch on my tablet, it stuck on boot logo,
So, please bro made the custom rom fast as possible :crying:
and bro good luck for your future
Thanks

rom link added
rom link added, you may recover your device...
gautam908 said:
Bro i have rooted and installed CWM Recovery by using your tutorial but Unfortunately i have deleted my rom and i have downloaded the stouk rom from the hcl (official website) but it is also in .img , so i can't even flash it throw the CWM Recovery, and if i switch on my tablet, it stuck on boot logo,
So, please bro made the custom rom fast as possible :crying:
and bro good luck for your future
Thanks
Click to expand...
Click to collapse

I need help while extracting the file :/
The one file is in .zip and another two files is in .z01 and .z02 file and cannot be extract, Bro help me please
If you can give the screen shot please it would help me a lot
Thanks

MD5 mismatch
Bro I have extracted the backup file of the ROM and while restoring it I was getting an error of MD5 mismatch???? Any solution???

Waiting for rom
I hav install cwm recovery.can you post the link of cyanogen mod custom rom

hello everyone, please help me to port cm 12 for my tablet: HCL me connect 2.0. above stock rom files are missing.. techincal speciation are: 1 GHz cortex A9 CPU , 1GB DDR3 RAM currently running on android 4.1 jelly bean os.
please guide and help me to update my tablet andriod version..

[ROM] Install Marshmallow as secondary with MultiROM

Hy every one,
I'm new on posting on this forum, but I find on this forum many usefull information for install ROM, first on my HTC Flyer before and now on my new Nexus 7 (2013). Recently I Install MultiRom, very beautyfull system for install a secondary ROM. I was successing to install ROM until Android 5.1. But now wen I try to install any ROM with Android 6.0 or 6.0.1 as secondary ROM I have no success. I try to modify updater-script as described here:
http://forum.xda-developers.com/showpost.php?p=57469293&postcount=106
without any success. I have this two error in some cases:
"Unable to mount storage"
"system partition has unexpected contents after OTA update" and in red color
E:Error executing updater binary in zip '/tmp/mr_update.zip'
I have Android 5.1 Stock ROM rooted as primary and MultiROM v32a app with stock kernel 5.1 patched.
The MultiROM TWRP is 2015-06-30 (v2.8.7)
I Try with:
cm-13.0-20160107-NIGHTLY-flo.zip
Bad_Boyz_Nexus_7_MMB29O_6.0.1_stock_systemless_rooted_TWRP.zip
crdroid-6.0.1-20160102-flo.zip
My question is: "there is a right procedure to do that"?
If anyone suggest me some post to consult without a writing explain would be better too
P.S.: Sorry for my poor english

you might check this patched multirom:
http://forum.xda-developers.com/showthread.php?p=63756363#post63756363

There is a thread already regarding multirom questions:
http://forum.xda-developers.com/nexus-7-2013/nexus-7-2013-qa/qa-multirom-v30-t2963019
There is no official multirom for MM yet, but you can install this experimental version:
koron393 said:
Hi.
I built mm-6.0 bootable multirom zip for deb.
I tested my private-build RR(lollipop-5.1.1) in primary and also private-build cm-13.0(marshmallow-6.0) in secondery.
And RR primary, BadBoyz stock rooted ROM secondary.
Works fine.
(But not testing mm-6.0 primary)
Source is here. Thanks @nkk71!
This is VERY EXPERIMENTAL. At your own risk.
Sorry NO FLO, because I don't have flo. But probably multirom zip will work on flo.
Now, multirom zip works on flo.
Download is here
modified multirom.zip for deb (Updated. Fix for flo)
cm-13.0 (caf) for boot test
Click to expand...
Click to collapse

xdacinq said:
you might check this patched multirom:
http://forum.xda-developers.com/showthread.php?p=63756363#post63756363
Click to expand...
Click to collapse
Ænimal said:
There is a thread already regarding multirom questions:
http://forum.xda-developers.com/nexus-7-2013/nexus-7-2013-qa/qa-multirom-v30-t2963019
There is no official multirom for MM yet, but you can install this experimental version:
Click to expand...
Click to collapse
Thanks for replay!!! I try this solution just now!!! I tell my result :fingers-crossed:

Hy,
I install this modified MoltiROM:
"modified multirom.zip for deb (Updated. Fix for flo)"
you suggest via MultiROM TWRP recovery on my first ROM (Stock 5.1).
I try to start the first cm-13.0-20160107-NIGHTLY-flo.zip (with modified updater-script) installed on USB Key formatted with ext4 filesystem. When device started not mount USB (like it do before). Reinstalling CMW to USB Key. Some things before. Reinstalling on internal SD and all OK!!! The red write: "Unable to mount storage" on installing but the system start correctly!!! :good:
With OpenGApps pico 6.0 installed via recovery, the system start but stuck to a window from OpenGApps.
Later I try to install:
"cm-13.0 (caf) for boot test" suggested
I'm very very happy!!!
I retest the ROM before and I will post the result
What GApps can I try?
Why MultiROM don't recognized USB Key at startup for run secondary ROM?
Thanks again!!!

I try "cm-13.0 (caf) for boot test" suggested, but I have flo version of Nexus 7 (2013). I modify the updater-script with deb replaced by flo and I install and run correctly. With cm-13.0-20160107-NIGHTLY-flo.zip ROM the auto rotation screen on desktop don't work, now with last install it work. With UPDATE-SuperSU-v2.52.zip installed ROMs stuck on CWM13 logo. Now the restored MarshMallow ROMs woks too

Zip Flashing problem.

Hi, Devs!
i'm having problem with flashable zips. :crying:Every time i flash a zip in TWRP
which is not specially made for Zenfone 2 x86 devices it shows me an error
"updater process ended with error 255":crying:
I also changed the 'update-binary' file from METAF folder from the Zenfone to firmware. But again it shows me another error of "updatre process ended
with error 6".:crying:
Someone can please tell me how could i make zips X86 device compitable?

There is a TWRP available for the Zenfone 2. May not be the latest but it works, its in either Android Developement or Original Android Developement.

i have TWRP
But i have TWRP version 3.0.0.0?
But let me know that the above problem is becouse of TWPR or the ZIP file?

How to Install lineage-13.0-20170401-nightly-tomato-signed.zip

Hi,
How to install Lineage OS 13.0 (Signed) Through TWRP Recovery.
While installing its show Signature Not Verified and shows ERROR 7
Plz Replay as soon as possible

did you flash the modem_HLOS.bin before this installation...
for enabling the volte in your mobile..

No OS, No recognition on Xperia Software. Need help installing a new OS

Hello so I tried to root my phone and in twrp I acidentally deleted all the files along with the OS so I have NOTHING on my storage just TWRP Recovery.
When I connect it to the Xperia software it dosnt recognise it it says "unknown manufactuerer MTP Device"
Anyone know how to fix this and get a OS on it. I have TWRP installed.
Thanks

flash firmware with flashtool

ouzqan said:
flash firmware with flashtool
Click to expand...
Click to collapse
When I try the flashtool says "Device connected in flash mode but driver is too old"

Marko_55 said:
When I try the flashtool says "Device connected in flash mode but driver is too old"
Click to expand...
Click to collapse
Delete all drivers and install driver in drivers folder

ouzqan said:
Delete all drivers and install driver in drivers folder
Click to expand...
Click to collapse
On Sony Mobile Flasher? And when I try to flash Lingeage OS 14.1 on TWRP for my Phone (E6833) it says that this OS is for E6833 and says my phone is E: Unknown or something like that. Any helP?

Marko_55 said:
On Sony Mobile Flasher? And when I try to flash Lingeage OS 14.1 on TWRP for my Phone (E6833) it says that this OS is for E6833 and says my phone is E: Unknown or something like that. Any helP?
Click to expand...
Click to collapse
Will it work if I disable Bootloader and then try and use the Xperia Companion Software repair? Will that get me an OS?

Close flash tool and connect your device in fastboot or flash mode (can't remember which one worked just try both) while xperia companian is on it will recognize it and it will try to reflash custom frimware alongisde with the custom rom. Or yıu can download a custom rom from android development and flash it. I recommend Xperia UI Mrom Light version 3.0.5 since it is a stock rom with root features and it has drm funcionality. You can connect your device to your computer and acesses its sd card while in TWRP recovery. So download rom zip and copy it your phone's sd card and then just flash it.