Develop Bugs

[Q] Help needed. Desire HD goes only Boot screen

Hi. I need help with Desire HD. i try to root my DHD and i failed. Now i only can acces Fastboot and recovery (TWPR). when i try to start it it freezes on htc logo, and i need to get the battery off. I did not make backup so i am screwd.. when i try to flash rom it succeed. and when i try to restart it freezes on the htc logo again. I am not s-off.
I use this method trying to root. http://forum.xda-developers.com/showthread.php?t=2221039
I make gold card but i don't have it cause this is my brothers phone.. How i can make this phone work. Please help
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.00.0029
(bootloader) version-baseband: 26.14.04.28_M
(bootloader) version-cpld: None
(bootloader) version-microp: 0438
(bootloader) version-main: 3.13.0.0
(bootloader) serialno: ***********
(bootloader) imei: ************
(bootloader) product: ace
(bootloader) platform: HBOOT-7230
(bootloader) modelid: PD9810000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4196mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: fcef1579
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) region-id: 0

Can you post a picture of your Hboot screen, or type everything from it

Gussta said:
Can you post a picture of your Hboot screen, or type everything from it
Click to expand...
Click to collapse
Did you fix the DHD?
Saitko korjattua DHD?

pjadec said:
Did you fix the DHD?
Saitko korjattua DHD?
Click to expand...
Click to collapse
Do you need help or?

Gussta said:
Can you post a picture of your Hboot screen, or type everything from it
Click to expand...
Click to collapse
RELOCKED! <<-----Wups
ace pvt SHIP S-ON RL
HBOOT 2.00.0029
MICROP 0438
RADIO 26.14..04.28_M
eMMC-boot
only that i cand do now is go to HBoot... and when i try to restart DHD it only goes to that htc logo...
Vittuku ei toimi, rasittavaa... <--- Just some finnish, Don't mind about it

pjadec said:
Did you fix the DHD?
Saitko korjattua DHD?
Click to expand...
Click to collapse
RELOCKED! <<-----Wups
ace pvt SHIP S-ON RL
HBOOT 2.00.0029
MICROP 0438
RADIO 26.14..04.28_M
eMMC-boot
only that i cand do now is go to HBoot... and when i try to restart DHD it only goes to that htc logo...

Superpulla said:
RELOCKED! <<-----Wups
ace pvt SHIP S-ON RL
HBOOT 2.00.0029
MICROP 0438
RADIO 26.14..04.28_M
eMMC-boot
only that i cand do now is go to HBoot... and when i try to restart DHD it only goes to that htc logo...
Vittuku ei toimi, rasittavaa... <--- Just some finnish, Don't mind about it
Click to expand...
Click to collapse
You can't install custom rom or any other non stock shiped rom on relocked hboot because after flashing rom you have to flash boot.img.
Now you can either flash stock shiped rom or unlock hboot (bootloader), flash rom, flash boot.img and format the cache, data and system partitions and wipe the Dalvik cache.
When you restart your phone should normaly boot.
If you want to flash stock shiped rom: http://www.androidruu.com/?developer=Ace
If not, I recomend this rom: http://forum.xda-developers.com/showthread.php?t=1382235
After you flash one of that rom you can try to root it again.
Where did you get stuck in rooting?

Major Boot Loop Problem

I really hope someone can help me!!
Tried to flash new boot loader version to 3.19 to install CM12 through fastboot. Had an error at the end saying it failed. I then tried to go back to stock and update with OTA's to get the new boot loader version so I could flash CM12, but that didn't work either. Rebooted phone and it was dead. Tried to do a wipe and restore nandroid backup. Said it couldn't read file. When I had my 64gb SD Card in the phone the Radio and Open DSP come up as invalid on the boot loader screen. But if I put in a 1 gb SD card or no SD card the Radio and Open DSP are OK. Put in a 1gb SD card with the CM11 zip and tried to flash in CWM recovery, looked to install OK, but still gets stuck in boot loop. Have tried re-flashing a few times and no luck.
Bootloader unlocked, s-on,

Can you provide your
fastboot getvar
Here's a thread that could help you out
http://forum.xda-developers.com/showthread.php?t=2735235

jball said:
Can you provide your
fastboot getvar
Here's a thread that could help you out
http://forum.xda-developers.com/showthread.php?t=2735235
Click to expand...
Click to collapse
C:\fastboot_adb\fastboot_adb>fastboot getvar all
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.54.206.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH44SWM10183
(bootloader) imei: 358714054617026
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: O2___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.085s

Find the ruu exe. For your version main: 1.54.206.5 and relock your bootlooader so you can run the exe .if you could find the right exe that matches or use the WWE exe .

jball said:
Find the ruu exe. For your version main: 1.54.206.5 and relock your bootlooader so you can run the exe .if you could find the right exe that matches or use the WWE exe .
Click to expand...
Click to collapse
I can't find the RUU for 1.54.206.5 anywhere. I've found nandroid backups, images, etc for 1.54.206.5 but they won't flash (I my be doing something wrong). Any other ideas? Can I run a newer RUU?
I got the WEE 1.54.1540.10 BrightstarUS RUU but it said it wasn't compatible? My CID is o2___001. Do I need to try find something that matches that as well as 1.54.206.5?

pats87 said:
I can't find the RUU for 1.54.206.5 anywhere. I've found nandroid backups, images, etc for 1.54.206.5 but they won't flash (I my be doing something wrong). Any other ideas? Can I run a newer RUU?
I got the WEE 1.54.1540.10 BrightstarUS RUU but it said it wasn't compatible? My CID is o2___001. Do I need to try find something that matches that as well as 1.54.206.5?
Click to expand...
Click to collapse
Is the device functional

jball said:
Is the device functional
Click to expand...
Click to collapse
What do you mean by functional? I can flash different recoveries, boot into them and boot into bootloader and RUU, and I can lock and unlock bootloader.
Should I be able to flash any WWE version?

are U s-on or s-off of u are s-off u can change your cid and mid number and flash developer edition ruu

Sorry
I forgot you said it does not boot to the system
---------- Post added at 11:12 AM ---------- Previous post was at 11:10 AM ----------
Neynge said:
are U s-on or s-off of u are s-off u can change your cid and mid number and flash developer edition ruu
Click to expand...
Click to collapse
He's S-ON

Phone is locked at bootloader, tampered and relocked

Ok, I feel insanely stupid, but last night I flashed LiquidSmooth on my phone and everything looked awesome. I didn't realize it until this morning that the sound doesn't work on the phone (my alarm didn't wake me up), and out of curiosity, I started digging around and realized that it wasn't able to play videos and the microphone didn't work for any apps. As I looked online, I realized that I needed to update my firmware to get my functions back. Since I haven't done this before, I jumped online and followed along with a guide that told me to run the command 'fastboot oem lock' before I flashed the firmware. It was early, so I didn't think about it until I hit enter and then realized that I just relocked my phone that runs off of an unlocked recovery/ROM.
Upon booting, it shows the bootloader screen:
*** TAMPERED ***
***RELOCKED ***
***Security Warning***
M7_WLV PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-1.12.42.0906
OpenDSP-v31.120.274.0617
OS-1.10.605.10 (1.10.605.15)
eMMC-boot 2048MB
Nov. 8 2013....
If I choose to try to go into the bootloader, it reboots the device and ends up right back at FASTBOOT. The only other screen I am able to get it into is the black HTC bootloader (fastboot reboot oem rebootRUU).
I've done some research on it, and it looks like I absolutely must unlock the bootloader before I can do anything, but without being able to boot into adb to run Firewater, I can't think of any other way. I feel like the OS 1.10.605.10 being red is what stands out to me, but I am unable to find a 1.10.605.10 signed/encrypted RUU to flash to it (anything unsigned fails). Also, here is the getvar information that I cam coming up with -
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 1.12.42.0906
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.10.605.10
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: XXXXXXXXXXX
(bootloader) imei: XXXXXXXXXXX
(bootloader) meid: XXXXXXXXXXXXXX
(bootloader) product: m7_wlv
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0731000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4283mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: dirty-fb8d0c81
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.083s
If anyone has any tips or ideas on where to go from here, please let me know! Thanks a ton in advance!

http://forum.xda-developers.com/showthread.php?t=2485319
Near bottom of second post is a link to the ruu for the version of your firmware so you can use rumrunner to s-off and unlock again. Be sure to download the signed one. You would flash it in ruu mode (fastboot oem rebootRUU, then fastboot flash zip ruu.zip twice to successfully flash the ruu). You could use the 4.4.3 s-on ruu, but then to unlock and s-off you would have to use sunshine.
Sent from my HTC6500LVW using XDA Free mobile app

Thank you!
I couldn't find the signed firmware anywhere else, so I nearly gave up. This totally worked and my phone is now alive and well!

M8 starting up in Fastboot, won't load installed ROM

I've stuffed something up along the way and now my M8 seems to refuse to load any ROM I've installed on it. What's the best way to go about fixing this? It's unlocked with S-Off.

Flashing an RUU is a silver bullet for starting over, as an RUU formats all your device's partitions and flashes them with stock images.
You'll need to provide CID & MID or your current firmware version (i.e. 4.16.401.10) if you need help locating a compatible RUU.
Cheers

Need some more details to see why the phone won't boot into OS after flashing a ROM.
Is an OS number indicated on the bootloader screen? If so, what is it?
What version TWRP?
What ROMs have you tried?

shirreer said:
Flashing an RUU is a silver bullet for starting over, as an RUU formats all your device's partitions and flashes them with stock images.
You'll need to provide CID & MID or your current firmware version (i.e. 4.16.401.10) if you need help locating a compatible RUU.
Cheers
Click to expand...
Click to collapse
I've tried flashing a few different RUUs and they all come out with an error 155. Googling it suggests I need to relock my bootloader but locking it and running the RUU again gives me the same error. I'm using SuperCID 11111111 and my MID is 0P6B70000. Currently on firmware 4.16.1540.8.
redpoint73 said:
Need some more details to see why the phone won't boot into OS after flashing a ROM.
Is an OS number indicated on the bootloader screen? If so, what is it?
What version TWRP?
What ROMs have you tried?
Click to expand...
Click to collapse
My OS number is 4.16.1540.8, I've tried TWRP 2.7.0.1, 2.8.7.0 and 3.0.0.0, roms I've tried include CM13, SkyDragon and a stock TWRP backup I found in another thread here.

roseyhead said:
I've tried flashing a few different RUUs and they all come out with an error 155. Googling it suggests I need to relock my bootloader but locking it and running the RUU again gives me the same error. I'm using SuperCID 11111111 and my MID is 0P6B70000. Currently on firmware 4.16.1540.8.
Click to expand...
Click to collapse
Your MID and firmware number don't jive; and it can indicate something pretty dangerous (and possibly a radio bricked phone).
Need more info on what you've done.
Do fastboot getvar all, and post the output (delete serial number and IMEI before posting).
Was the phone new and stock (unmodified) when you got it; or did it have a previous owner?
Please list all the mods you have applied (s-off, changed CID, changed MID? etc.).

Ok, here's what getvar all reports:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.24.21331147A1.09G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.16.1540.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: -snip-
(bootloader) imei: -snip-
(bootloader) imei2: Not Support
(bootloader) meid: 99000499014851
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 3aa067db
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.035s
I bought the phone second-hand, it was running a custom ROM (SkyDragon) with cid already set to 11111111 and I wanted to return it to stock. I got the Unlocked/Developer RUU from HTC's site but that didn't start up for me so I tried a bunch of stuff, fiddling with firmwares and unlocking/relocking bootloader and so on but in the end the RUU just hadn't downloaded properly. Once I managed to get the RUUs to run they've all come up with error 155 when they start the flash and flashing the rom.zip direct gives me an error (I forget if it's the same or different)
I've also tried restoring assorted TWRP backups, installing new roms and so on, directly flashing boot.img, things seem to flash ok but the phone just boots direct into fastboot.

Update: I'm not sure what went differently this time but I've installed the latest Cyanogenmod nightly and it's starting up as expected.
I'd like to get back to stock though. What's the best way to go about doing this? The phone was already modified when I got it so I'm not sure what it would've had on it when it was purchased originally.
Edit: A bit of googling suggests this is a Sprint handset (I dismissed this to begin with since I'm in Australia and didn't think it'd be an overseas handset, but ok) so I've flashed 6.20.651.3 firmware and am waiting for a matching RUU to download. Fingers crossed!
Edit again: All sorted now, thanks for your help!

roseyhead said:
Update: I'm not sure what went differently this time but I've installed the latest Cyanogenmod nightly and it's starting up as expected.
I'd like to get back to stock though. What's the best way to go about doing this? The phone was already modified when I got it so I'm not sure what it would've had on it when it was purchased originally.
Edit: A bit of googling suggests this is a Sprint handset (I dismissed this to begin with since I'm in Australia and didn't think it'd be an overseas handset, but ok) so I've flashed 6.20.651.3 firmware and am waiting for a matching RUU to download. Fingers crossed!
Edit again: All sorted now, thanks for your help!
Click to expand...
Click to collapse
I'm glad you're all set. But for other users' benefit, here is a link to HTC's official Sprint RUU page, with instructions for flashing the RUU as well as a download link for Sprint M8 marshmallow RUU 6.20.651.3
Sprint RUU instructions page:
http://www.htc.com/us/support/htc-one-m8-sprint/news/
Sprint M8 marshmallow RUU 6.20.651.3 Direct Link:
http://dl3.htc.com/application/RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3.exe
Cheers

i am having the same problem. i dont even know what carrier this phone was from. but the model number written on the back is OP6B110 M8x... and this is the result of getvar all..
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.08.20.0916
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.16.654.4
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 99000499165808
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 8a0f02ff
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0

roseyhead said:
I got the Unlocked/Developer RUU from HTC's site but that didn't start up for me so I tried a bunch of stuff, fiddling with firmwares and unlocking/relocking bootloader and so on but in the end the RUU just hadn't downloaded properly. Once I managed to get the RUUs to run they've all come up with error 155 when they start the flash and flashing the rom.zip direct gives me an error (I forget if it's the same or different)
Click to expand...
Click to collapse
Happy to see your sorted it out.
I agree it appears to be the Sprint version, based on the the MID (0P6B70000) and product name (m8_whl). While the MID can be modified, the product name is typically not (never seen a mod method for that - so the product name is very reliable).
That being said, I would strongly caution you moving forward, to not flash any firmware or RUU to this device except Sprint M8 firmware/RUU. Reason being, the partitioning on the Sprint phone is different from most other versions; and flashing another version's firmware can lead to a radio brick (phone boots, but nothing requiring the radio will work).
---------- Post added at 11:38 AM ---------- Previous post was at 11:30 AM ----------
mushfiq20 said:
i am having the same problem. i dont even know what carrier this phone was from. but the model number written on the back is OP6B110 M8x... and this is the result of getvar all..
(bootloader) version-main: 2.16.654.4
(bootloader) product: m8_whl
(bootloader) modelid: 0P6B70000
Click to expand...
Click to collapse
This is Sprint version, same as OP based on the model ID and product name. Although main version would indicate the Sprint Harmon Kardon version. RUU can be found at the bottom of the following webpage: http://www.htc.com/us/support/htc-one-m8-harman-kardon-edition-sprint/news/
The M8x designation on the back cover can't be trusted in this case. The back cover has been replaced to remove the "Sprint" logo branding. We've seen several phones like this (back cover replaced to remove evidence of branding) on the forum. You have to go by the getvar data.
Also, be sure to remove your IMEI and serial number from the getvar output. These are personal data, and should never be posted online.

redpoint73 said:
That being said, I would strongly caution you moving forward, to not flash any firmware or RUU to this device except Sprint M8 firmware/RUU. Reason being, the partitioning on the Sprint phone is different from most other versions; and flashing another version's firmware can lead to a radio brick (phone boots, but nothing requiring the radio will work).
Click to expand...
Click to collapse
Thanks a lot for the tip! I'll bear that in mind going forward.

Hi there I seem to be having similar issues. I purchased a refurbished M8. The case indicates 0P6B110 M8x however fastboot getvar all gives:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.09.20.0209
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.30.651.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: [REDACTED]
(bootloader) imei: [REDACTED]
(bootloader) imei2: Not Support
(bootloader) meid: 99000499237658
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Going off the info in the thread I downloaded RUU 6.20.651.3.
While verifying I want to update the ROM version it states:
From:
Image Version: 1.54.651.8
To:
Image Version: 6.20.651.3
After clicking next and progressing I get Error 155.
On the fastboot recovery screen shows:
*** LOCKED ***
m8_whl pvt ship s-off
cid-111111111
hboot-3.16.0.0000
radio-1.09.20.0209
opendsp-v38.2.2-00542-m8974.0311
os-3.30.651.2
eMMC-boot 2048
loading zip info fail
RUU
Any help with this would be greatly appreciated.

metalbassist33 said:
On the fastboot recovery screen shows:
*** LOCKED ***
m8_whl pvt ship s-off
cid-111111111
hboot-3.16.0.0000
radio-1.09.20.0209
opendsp-v38.2.2-00542-m8974.0311
os-3.30.651.2
eMMC-boot 2048
loading zip info fail
RUU
Any help with this would be greatly appreciated.
Click to expand...
Click to collapse
To run a Marshmallow RUU, you need to fastboot flash its firmware.zip first.
1. flash 6.20.651.3 firmware.zip
2. run RUU
You should be able to find the firmware.zip in Sprint section
Or you try to find one version lower (lollipop) than 6.20.651.3 RUU, run it then do OTA to 6.20.651.3

ckpv5 said:
To run a Marshmallow RUU, you need to fastboot flash its firmware.zip first.
1. flash 6.20.651.3 firmware.zip
2. run RUU
You should be able to find the firmware.zip in Sprint section
Or you try to find one version lower (lollipop) than 6.20.651.3 RUU, run it then do OTA to 6.20.651.3
Click to expand...
Click to collapse
Just to confirm, if I get a lollipop version, do I still need to fastboot flash a firmware.zip?

metalbassist33 said:
Just to confirm, if I get a lollipop version, do I still need to fastboot flash a firmware.zip?
Click to expand...
Click to collapse
No .. not needed, run Lollipop RUU then do OTA to Marshmallow

Need help in getting back to stock

Hello,
I received an HTC M8 with a costume ROM.
I tried looking at the forum on how to get it back to stock but couldn't understand which RUU i need and where to get it.
In the System info it says crDroid version: crDroidAndroid-7.1.2-20170607-m8-v3.4.
Any help will be much appreciated.
Bootloader info:
*** UNLOCKED ***
M8_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.22.21331147A1.29G
OpenDSP-v46.2.2-00564-M8974_FO.0811
OS- (this is empty)
eMMC-boot 2048MB
Oct 30 2014,16:10:11.0
P.S
Can i turn the device into Google Play Edition
Shimshi

Post fastboot getvar all result (remove serial & imei no.) then we'll know what you need.
You can't turn it to GPE with S-On but you can install GPE rom after you update its firmware to Marshmallow.

ckpv5 said:
Post fastboot getvar all result (remove serial & imei no.) then we'll know what you need.
You can't turn it to GPE with S-On but you can install GPE rom after you update its firmware to Marshmallow.
Click to expand...
Click to collapse
Thank you for your reply.
As i understood i can turn my device to GPE after i get it back to stock and lock it back?
fastboot getvar all result:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: a3d0cb0d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.091s

Your device is same as mine which is a Asia WWE but yours in lower version.
You can get RUU_M8_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.19.707.2_Radio_1.25.21331147A1.06G_20.69.4196.01_F_release_414204_signed.exe
from here - http://androidruu.com/?developer=M8
After you installed RUU, do OTA to 4.19.707.4 and finally to 6.14.707.1
You need to relock bootloader before you install RUU
After OTA is done up to 6.14.707.1, you can reunlock bootloader and install latest 3.1.x TWRP and install any custom ROM that you like or install GPE ROM.

ckpv5 said:
Your device is same as mine which is a Asia WWE but yours in lower version.
You can get RUU_M8_UL_L50_SENSE60_MR_hTC_Asia_WWE_4.19.707.2_Radio_1.25.21331147A1.06G_20.69.4196.01_F_release_414204_signed.exe
from here - http://androidruu.com/?developer=M8
After you installed RUU, do OTA to 4.19.707.4 and finally to 6.14.707.1
You need to relock bootloader before you install RUU
After OTA is done up to 6.14.707.1, you can reunlock bootloader and install latest 3.1.x TWRP and install any custom ROM that you like or install GPE ROM.
Click to expand...
Click to collapse
Hey ckpv5, thanks for your reply.
I couldn't relock the bootloader and couldn't understand how to use the RUU, from my knowledge it should be a zip file but it's an exe file.
Please advice?

Mostly the RUU that comes directly from HTC is in exe format as you can see here : http://www.htc.com/us/support/rom-downloads.html
What you need, read this : https://forum.xda-developers.com/showpost.php?p=64926362&postcount=4
I believe you already have adb/fastboot installed as you already gave me the getvar output. You need that HTC USB drivers and also a Windows PC with USB2.0
To relock bootloader
Boot your device to bootloader/fastboot and type this command after connecting to PC
fastboot oem lock
fastboot reboot-bootloader
To install RUU
After your device bootloader is relocked, while still in fastboot mode and connected to PC
Right click the exe and select run as Administrator, you'll see instruction screen. Follow all the steps as instructed .. accept, next, next, blablabla until it is completed.
Once finish, reboot your device.

Thank you ckpv5.
Sorry for the late response, it worked and now i'm back to stock.
Thank you very much.