I have bricked my phone (don't know how ), or it's a hardware failure (maybe mmc), i tried to restore backup that i've restored a couple of times prior to today, and always was all ok, but not this time, twrp reported error during restore and had to pull out the battery to restart the phone and now can't enter to recovery or boot up the system
I tried with flash tool 2014 and didn't have success, keep getting message 'the phone disconnected from pc', drivers are installed correctly, but maybe my problem is that when i try to enter download mode after 4-5 seconds of download mode screen it transfers to fastboot mode started (no 'firmware update' screen). Tried with laf.img, recovery.img, boot.img via fastboot commands and keep getting messages
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
Is there any method that I could try, or it's a dead hardware?
Highly recommend you take it in to a service center and get them to look at it. Just tell them that you were updating your phone from Kitkat to lollipop and that happened using the LG PC Suite
If you were restoring a backup of stock rom theres absolutely no proof whatsoever that you rooted it or you installed custom recovery and repair people cant be bothered going into fine detail just to check.
Essentially all your system partitions are blank except bootloader which is at least better than those who get QHUSB_DLOAD
Open teamveiwer i see error
Can not flash in fastboot>?
Hi,
Same problem here. Have you found a solution? Unfortunately, cannot flash in fastboot, because I always get the same error message:
error : auto CMD12 error
Can you help me please??
soultion for no download mode, fastboot mode, qhsusb bulk mode
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
Need help fixing LG G3 D852 Hard-Brick!
aftabalam8c2 said:
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
Click to expand...
Click to collapse
Hi! I just recently bricked my LG G3 D852, and I would really appreciate it if you could PM me and help me out here.
http://forum.xda-developers.com/showthread.php?t=2785089
If it's a software issue, this will revert to stock, and absolute factory.
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Mevolent said:
http://forum.xda-developers.com/showthread.php?t=2785089
If it's a software issue, this will revert to stock, and absolute factory.
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Click to expand...
Click to collapse
Can you help me unbrick it? I'm completely lost here I can't find my IMEI, the stickers were removed and also there isn't one on the phone itself. The phone is dead so I can't find it that way, but I'm trying to find the right kdz file :C
hai_im_edd said:
Can you help me unbrick it? I'm completely lost here I can't find my IMEI, the stickers were removed and also there isn't one on the phone itself. The phone is dead so I can't find it that way, but I'm trying to find the right kdz file :C
Click to expand...
Click to collapse
What region are you in?
Europe has the D855 in 16GB and 32GB
Canada has the D852
Verizon has the Vs985
T-Mobile USA has the D851
AT&T Is the D850
Australia had the D855k
LS990 is Sprint
F400K/L/S is Korean
There are plenty more http://forum.xda-developers.com/showthread.php?t=2791269[URL]here
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Mevolent said:
What region are you in?
Europe has the D855 in 16GB and 32GB
Canada has the D852
Verizon has the Vs985
T-Mobile USA has the D851
AT&T Is the D850
Australia had the D855k
LS990 is Sprint
F400K/L/S is Korean
There are plenty more http://forum.xda-developers.com/showthread.php?t=2791269[URL]here
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
Click to expand...
Click to collapse
From Canada, (eh?) so I have the D852 model!
hai_im_edd said:
From Canada, (eh?) so I have the D852 model!
Click to expand...
Click to collapse
Before you do anything, read the entire post linked. There is a D852g version.
Sent from my D855 running CloudyG3 2.3 with Gabriel5 kernel.
Don't forget to smash that thanks button if I, or someone else helps you, guys!
I see, thank you very much
I have the same problem, has anyone been able to fix it?
Kirckete said:
I have the same problem, has anyone been able to fix it?
Click to expand...
Click to collapse
Remove the battery, put it, press the volume + and connect to PC USB, if like entering download, what
happens to us not to go, will leave the ****ing LoGo, Well, hold down the volume + and not let go, I
think it is less for 2 minutes more. After a while, the computer tells us that something was connected,
the phone will tell you who is in fastboot as I said before, if not let me fastboot flash boot files and
the LAF, recovery ect, nothing happens, there is still a magic command.
fastboot boot laf.img
Keep it in the ****ing heart
hello guys
im your brother im a new here
please
i have LG G3 hung fastboot mode
started please
cant enter recovery
cant enter download mode
please help me
thanx advance
nokia alkng said:
hello guys
im your brother im a new here
please
i have LG G3 hung fastboot mode
started please
cant enter recovery
cant enter download mode
please help me
thanx advance
Click to expand...
Click to collapse
guys
i used this
http://forum.xda-developers.com/lg-g3/help/tutorial-fixing-fastboot-mode-started-t2995854
and us laf .img file from this
http://forum.xda-developers.com/showthread.php?t=2766437
but still not slove:crying:
nokia alkng said:
guys
i used this
http://forum.xda-developers.com/lg-g3/help/tutorial-fixing-fastboot-mode-started-t2995854
and us laf .img file from this
http://forum.xda-developers.com/showthread.php?t=2766437
but still not slove:crying:
Click to expand...
Click to collapse
your phone is bricked and theres nothing you can do about it
take it into a service center or your carrier shop and tell them the problem happened when you were applying the lollipop ota
itsbighead said:
your phone is bricked and theres nothing you can do about it
take it into a service center or your carrier shop and tell them the problem happened when you were applying the lollipop ota
Click to expand...
Click to collapse
im sure its software not hardware i have octupos box
hi
Hi dear frends.
Its sad to know that all you guys cant go to download mode or facing security error or stuck in lg logo or in fastboot mode
And some guys stuck qhsuab bulk 9008
So the solution is here.
If you are unable to get into download mode then you need to force your g3 into qhsusb bulk mode by shorting the test point.
I will help u all guys.....
I will help u to unbrick ur any lg model wothout download mode or stuck in 9008 or anytype of problem.
Please let me know your problem in pm.
hi , i have got lg g3 d855 model, it has got hard bricked i think , i did nothing i just opened the camera app and suddenly screen gone black, and now its not responding to anything. its neither going into download mode nor the recovery mode, please help me. this phone was not rooted, it was running on stock. and when i connect it to laptop with date cable it doesnt show the device instead in device manager it shows ** QHSUSB_BULK **
please help as soon as possible, thanks.
hi, i have problem with my lg gpad v410, my tablet have black screen and when i switch on nothing show only connect computer unknown device, people sey that have dead boot and need some file for repair dead boot, please help me :/
lgv410 said:
hi, i have problem with my lg gpad v410, my tablet have black screen and when i switch on nothing show only connect computer unknown device, people sey that have dead boot and need some file for repair dead boot, please help me :/
Click to expand...
Click to collapse
Try to get into download mode. If that works then follow my tutorial. You can't get back to stock 5.x that I'm aware of, but you can run custom ROMs. Much better than a brick.
http://forum.xda-developers.com/g-pad-10/general/tutorial-lg-gpad-v410-5-1-to-4-4-t3232150
Hi ,
after fixing 9008 qualcom issue and getting to download mode i flashed the wrong TOT files and flash tool failed after "Laf memory size"
now i can't get back to download, can't get back to 9008 qualcom and all i can see is the LG logo and then the phone is dead, with no response at all,
can someone please assist, even getting me back to 9008 is great and i can take it from there...
hope you will help me!
Thanks
Here you go buddy.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
can windows device menager see the device ?
Jahanzaibawan said:
Here you go buddy.
http://forum.xda-developers.com/spr...very-guide-t3132359/post61280085#post61280085
Click to expand...
Click to collapse
Thanks,
but im looking for an option without HW issues, as i dont think i could be able to solder and shorten the board.
any other ideas?
when i plug the phone the computer pops a message with Unreconginzed connection