Develop Bugs

Error when installing App2SD

Hi, i am trying to install app2sd using the Nimbu guide found here : http://nimbu.amorvi.com/2010/05/how-to-root-your-htc-desire/
However, when i follow that guide and start to flash from the sd card, i get this error:
E:Can't symlink /system/xbin/[
E:Failure at line5:
symlink busybox SYSTEM:xbin/[
The card i am using to flash the app2sd is NOT partitioned. Is this an issue?
Here is some other info on my phone
- i have an orange phone, but i reflashed to the 1.21.... generic rom
- After installing this rom, i flashed the radio back to this one: update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
If you need any more info let me know and thanks for your help

ok, just to update this...
i have now managed to install app2sd by reinstalling rootedupdate.zip
HOWEVER, now when i turn my phone on it just goes to the white HTC screen and hangs there, it doesnt ever boot up. Can anyone shed any light as to why its doing this and how i can fix it?
i have partitioned the SD card and did install it with a goldcard
in the mean time im gonna flash back to a non app2sd rom

anyone know why it might be doing this? it just hangs on the white htc splash screen straight after powering on

gyro11 said:
anyone know why it might be doing this? it just hangs on the white htc splash screen straight after powering on
Click to expand...
Click to collapse
If you are stuck in a boot loop, then like you suggested, it's most likely because you have not partitioned the SD Card.
You only need to create a Gold Card if your phone is software branded and is running a non-generic rom.

but ive rebooted the phone with a partitioned SD card and that doesnt work...Does the card i install App2sd need to be partioned?

gyro11 said:
but ive rebooted the phone with a partitioned SD card and that doesnt work...Does the card i install App2sd need to be partioned?
Click to expand...
Click to collapse
You replace the Gold Card sd card with your normal sd card. Then in recovery, you need to partition your SD card, this is for the benefit of allocating extra space with the ext partition, which is used specifically for the installation of App data.
That's why it is recommened to set a 0MB swap, ext2 with 512MB (for apps), and the rest of the partition to FAT32.
Make sure you wipe Factory Reset, Dalvik, Cache, SD:EXT and then flash the ROM. After you have done this and while you are still in recovery (don't reboot phone yet), install Apps2SD zip (only if you are installing a ROM that does not include Apps2SD). Power off phone and then insert your sd card into the phone (not the Gold Card). You then enter Recovery Mode again and partition the SD card accordingly.

ok, but im not sure your understanding (i might be wrong...)
I have 2 sd cards....1 which is a gold card which is NOT partitioned and contains the install file for app2sd
and 1 which is the sdcard i run in my phone under normal operation.
I am ONLY using the non partitioned card to install app2sd. As soon as it is installed i remove this card and insert the Partitioned card
Does this make sense? So i know that a partioned sd card Must be used when running the phone with apps2sd, but do i need a Partioned goldcard just to install it? i can i just use a standard goldcard for the installation (and then put in the partioned card after installation) (note...i am using a goldcard as i have an orange uk desire with a generic rom)

Ah yes i understand you now. Yep, the Gold Card should not be partitioned, only formatted as FAT32. After you have used the Gold Card to install Apps2SD, you then insert the other SD card and partition using that.
-------------------------------------
Sent via the XDA Tapatalk App

ok, so that is how i had it, with the partioned sdcard, but i am still getting the white htc splash screen and not getting any further. Any idea why this might be happening?
im installing it on the 1.21... update

try ext3 , NOT ext2
that did it for me.

rhedgehog said:
try ext3 , NOT ext2
that did it for me.
Click to expand...
Click to collapse
Do you mean to select the option:
SD:ext2 to ext3
as i have already done that and it didnt work

Hmm... strange...
Have you tried repartitioning your sd card? Set the values for swap and ext to zero, then check to see if it boots ok.
-------------------------------------
Sent via the XDA Tapatalk App

MasDroid said:
Hmm... strange...
Have you tried repartitioning your sd card? Set the values for swap and ext to zero, then check to see if it boots ok.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
nope, just tried with these settings and unfortunately still no luck. I even tried it without any sdcard in there at all and still the same result.
Could the radio version have anything to do with it? as (other than the update) thats the only other thing ive flashed to it

gyro11 said:
nope, just tried with these settings and unfortunately still no luck. I even tried it without any sdcard in there at all and still the same result.
Could the radio version have anything to do with it? as (other than the update) thats the only other thing ive flashed to it
Click to expand...
Click to collapse
What Radio version did you flash exactly? I don't think that would cause a problem unless you flashed an incompatible version. Are you running Bootloader 0.75.0000 or 0.80.0000?
I would suggest you flash back to stock Radio and then flash back to stock ROM also, as this will restore the stock Kernel. Then after that, carefully take it step by step and try again.
From the steps you have carried out, it all sounds ok to me. When you attempt this again after returning everything to stock, try a ROM that already includes Apps2SD, leaving you to just partition the SD card (after wiping and flashing the custom ROM while in Recovery).

The rom im using is the rootupdate base (1.15) with the 1.21... generic rom manually installed.
I then flashed the following radio:
update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
This is really annoying as im finding myself flashing my phone daily now to get this working. I appreciate all your help but i think now im just gonna wait for a stable release of froyo to come onto the forums and update with that

Thats the stock radio version that you re-flashed so don't see how that would cause a problem.
-------------------------------------
Sent via the XDA Tapatalk App

Un-partitioning SD card?

Hi guys,
I couldn't find anything about this (I did try searching before posting this thread, so I hope I am not repeating a common question!).... I wish to unpartition my sd card and just go back to a normal fat32 partition....
So far I have tired windows disk management and Rom Manager, which just allows you to ADD a ext partition with no luck!
Can anyone else guide me how to achieve this?
Regards!

Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night

cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
:O Thanks, which recovery should I be using? :s
System recover? clockworkmod using the fake flash method? because I don't see the Partition SD Card menu anywhere else and i've tried both!
I know its right in front of me somewhere, I just can't see it, D'oh!

use the one from rooting folder

Bah,
I ended up using GPart live cd to undo it!!
Thanks for the responses guys, hopefully this will help someone else who needs it!

cargobr151 said:
Open Recovery Menu (green) per adb.
Partition SD Card
SWAP=0 MB
EXT=0 MB
Remainder - FAT32
good night
Click to expand...
Click to collapse
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?

jacobtc said:
Sorry for using your thread, however I don't have that Partition SD Card option on my Desire, when I go into recovery?
Click to expand...
Click to collapse
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...

r5ingh said:
That's fine, it's why I created the thread!
If you just want to partition you can use ROM Manager (but this requires root)
you need the recovery file (entitled 'pushfiles' or something) from the risk-free root package to partition/un-partition the card.
Else, you can use a GPart live CD, which makes it really easy!
Hope that helps buddy...
Click to expand...
Click to collapse
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...

jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
However in recovery, when I try to mount sd-ext it fails to do so Don't know why...
Click to expand...
Click to collapse
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!

r5ingh said:
If you're using a2sd+ then you need to change your ext2 partition to ext3, Also, I don't believe that you need a swap partition anymore...
Try that!
Click to expand...
Click to collapse
Cool, now I can mount the ext partition in recovery! Thanks!

jacobtc said:
I already partitioned my SD card via GParted, got a 16 gb card partitioned as follows:
14 gb fat32
1 gb ext2
250 gb swap
Click to expand...
Click to collapse
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App

GANJDROID said:
Was that a 16gb card or a 265gb?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
lol, lets give the guy a break.... we all know it was a 256GB Flash card!
Anywhooo, I have another question, so I think i'll hijack my own thread!
Guys, whats the most efficient way to backup/restore and move apps between roms? I've ended up manually re-installing installed apps 2/3 times now, I was going between roms that did/didn't support a2sd. Also, should there be any consideration to any specific backup options available in the various tools?
Thanks in advance!

Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?

prove said:
Hi, my phone got bricked using GPart live to turn my ext 2 into a 3 partition. Everything went fine using the program, turned off Usb storage, went into market and tried to download a program, when it started to install the screen when black.
Now I cant boot with sdcard in, I don't come past the white HTC screen
Without SDcard it starts loading the system but the loading is a never ending loop.
Tried to format SD with fakeflash, dosent help
Tried reflashing my rom with wipe and everything, dosent help
Any ideas?
Click to expand...
Click to collapse
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol

r5ingh said:
I would say, firstly try to get your phone working by wiping it clean and re flashing the rom. Use a different memory card just to get up and running. Then you can concentrate on fixing you card..
Although that seems like a very strange issue, are you sure you formatted your card correctly with GPart? (eg, exactly 512 MB/1024MB?) I'm a n00b myself so I would also wait for some of the more experienced users to offer their input. lol
Click to expand...
Click to collapse
Solved it by using AM recovery, repair + new partition solved the problem! Gonna reflash 2.0 again since i messed up the wiping somehow and then keep this until the rooted 2.2 is out!

Desire doesnt load while inserting a new sd card

Hi,
I bought a new 16Gb microsd hc card after installing the RCMixHD rom in order to give it a 2gb ext size.
Right now im using 8gb-512 ext3 goldcard.
Unfortunately when i put the 16gb in the device (after fat32 quick format)- the device doesnt load
Its HBOOT driver is recognized by windows but i cant get the device to load.
Any ideas?
Many thanks ahead.

rcmix installs part of the rom on the ext partition of sd card that is why the phone wont boot.
1. use a card reader to format your new card and copy the backup of your old card onto the new one (dont forget the rom which you wish to flash again, i suppose rcmix)
2. turn off your phone place in the new card
3. go into hboot, wipe everything and flash the rom
your rom should be working now with your new sd card
(Using this method will cause that you loose all the data that was previously on the phone, but personally i feel: New Card --> New Start and clean flash, that way you can ensure everything is working properly!)

RaymondErasmus said:
rcmix installs part of the rom on the ext partition of sd card that is why the phone wont boot.
1. use a card reader to format your new card and copy the backup of your old card onto the new one (dont forget the rom which you wish to flash again, i suppose rcmix)
2. turn off your phone place in the new card
3. go into hboot, wipe everything and flash the rom
your rom should be working now with your new sd card
(Using this method will cause that you loose all the data that was previously on the phone, but personally i feel: New Card --> New Start and clean flash, that way you can ensure everything is working properly!)
Click to expand...
Click to collapse
Thanks a lot!
I have a feeling this might work
by the way- in which part should i create the ext partition?
before flashing the rom i guess?
and with which recovery could i make this partition to 2gb size?
Thanks again!

Spitniv said:
Thanks a lot!
I have a feeling this might work
by the way- in which part should i create the ext partition?
before flashing the rom i guess?
and with which recovery could i make this partition to 2gb size?
Thanks again!
Click to expand...
Click to collapse
Or..
You can make a Nandroid backup with your old card inside, then partition the newcard with one Fat32 and one ext3 (for A2SD+), copy the folder "Clockworkmod" from the old card to new one, Insert new card, Goto Recovery, Nandroid restore all..
Should work.
Before doing this, make a Titanium backup too..

Spitniv said:
Thanks a lot!
I have a feeling this might work
by the way- in which part should i create the ext partition?
before flashing the rom i guess?
and with which recovery could i make this partition to 2gb size?
Thanks again!
Click to expand...
Click to collapse
yes partition before you flash the rom.
And to create the ext partition with the correct size:
You can use amonra to create the ext, clockworkmod 2.1.5.2 (or something one of the newer versions can also do this) --> these work from recovery
I used gParted (a bootable cd, is very useful), you could use fdisk too! With these tools create the ext partition after the fat32 partition otherwise windows will want to format the sd card. (I guess depends on what OS you are using) --> i would use one of these 2 as you have more control over the process

Help! New 16GB SD Card And Won't Restore

I Have Just Gotten A 16GB SD Card And I Can't Seem To Use Nand Restore it says err 'run nandroid-mobile.sh restore through adb!
Ive tried it at 100% battery power and still doesn't work i flash a rom but it get stuck on first boot picture its and empty memory card with nothing on it and i want to restore my insertcoin cm7 1.0.8 backup from my old memory card, i even made the partitions and converted ext2 to ext 3 then to ext but when i check the partion on adb it does not show any ext2 partition only fat32 and linux-swap(if i make one)
Pleasee Help!

DJ-Desire said:
I Have Just Gotten A 16GB SD Card And I Can't Seem To Use Nand Restore it says err 'run nandroid-mobile.sh restore through adb!
Ive tried it at 100% battery power and still doesn't work i flash a rom but it get stuck on first boot picture its and empty memory card with nothing on it and i want to restore my insertcoin cm7 1.0.8 backup from my old memory card, i even made the partitions and converted ext2 to ext 3 then to ext but when i check the partion on adb it does not show any ext2 partition only fat32 and linux-swap(if i make one)
Pleasee Help!
Click to expand...
Click to collapse
Repartition SD. Make sure that both partitions are primary and the FAT partition is first.

paul.c said:
Repartition SD. Make sure that both partitions are primary and the FAT partition is first.
Click to expand...
Click to collapse
Just Tried that with no luck

What filetype is your ext partition ? Ext2, 3 or 4 ?

paul.c said:
What filetype is your ext partition ? Ext2, 3 or 4 ?
Click to expand...
Click to collapse
Ext2 when I make partition and I convert it to ext3 then ext4 through recoverybut it doesn't show the ext partitionon adb

DJ-Desire said:
Ext2 when I make partition and I convert it to ext3 then ext4 through recoverybut it doesn't show the ext partitionon adb
Click to expand...
Click to collapse
What recovery do you have ? CWM or Ra ? CWM has been reported with issues on ext4. Try ext 3.

paul.c said:
What recovery do you have ? CWM or Ra ? CWM has been reported with issues on ext4. Try ext 3.
Click to expand...
Click to collapse
I have amon ra I have cm7 alpharev hboot also

DJ-Desire said:
I have amon ra I have cm7 alpharev hboot also
Click to expand...
Click to collapse
You made the backup with Ra, right ?

paul.c said:
You made the backup with Ra, right ?
Click to expand...
Click to collapse
Yes I did. Is that the problem?

DJ-Desire said:
Yes I did. Is that the problem?
Click to expand...
Click to collapse
No. You should always restore with the same recovery you backed-up.

paul.c said:
No. You should always restore with the same recovery you backed-up.
Click to expand...
Click to collapse
then what is the problem? i restored through adb and it just wont boot ip

DJ-Desire said:
then what is the problem? i restored through adb and it just wont boot ip
Click to expand...
Click to collapse
I guess if everything else fails you could try that.

paul.c said:
I guess if everything else fails you could try that.
Click to expand...
Click to collapse
But it still fails and on adb it wont let me make an ext2 partition

Im returning this sd card and getting a class 6 or 10 one

Hi Guys,
I too just bought a new 16gb Class 4 SD card today and want to upgrade.
I currently have a 4gb with 512mb EXT3 partition, Clockwork recovery, Insertcoin 1.0.8, S-ON - all working great (except 512mb is full).
Based on your experiences if I have no SD card reader should I do the following:
- Full Nandroid Backup on phone
- SD Fat32 backup to PC
- Switch off phone and insert new 16gb card
- Boot into HBOOT and wait for USB mode
- Boot my Linux USB drive into Gparted
- Create FAT32 and EXT3 parition (should 1.5gb be enough for EXT3?)
- Boot into recovery
- In advanced restore just restore the sd-ext portion in Nandroid to the new SD (is it issue EXT partition went from 512 to 1.5gb?)
- Boot phone?
- If issues swap back in original SD card and wipe sweat from brow
Many thanks for your help on this I am quite nervous about messing it up. I know there are many threads none none are clear on best method and many require card reader.
Thanks
Bridgstfer

Buy a card reader for future use...
all you need to do is -
Nandroid backup
Format your new sd card to what ever you like... Fat 32 1gb ext for example
Transfer all from old card to new card
Insert new Sd
advanced restore ext only
Done

Thanks.
Oh i think I forgot a step - obviously to do the restore with the new card I will need to boot windows again and copy the backup file to the FAT32 partition again (with phone still in HBOOT USB mode).
If I do the transfer your way how can I copy everything from old card to new card in windows or Ubuntu without card reader? Cant seem to mount the EXT in Ubuntu when plugged in through the phone.

While using old card transfer files to PC
Swap cards
Transfer files from PC to new sd
'Cant seem to mount the EXT in Ubuntu when plugged in through the phone' - Buy a card reader there better to use and very cheap

Worked - now upgraded to fresh 16gb SD using method from other thread! Now running 1gb EXT partition will all my apps installed + flash + other ones i couldnt install before and still have 90mb left on internal

bridgstfer said:
Worked - now upgraded to fresh 16gb SD using method from other thread! Now running 1gb EXT partition will all my apps installed + flash + other ones i couldnt install before and still have 90mb left on internal
Click to expand...
Click to collapse
Enjoy !!!!

[Q] ROM can't find partition on SD card

I have a little problem with my WFS. I partitioned the SD card to use Int2Ext4, but the ROM keeps saying that no SD card is present, even if it does use the EXT partition. I can mount the card in CWM, I can see it's content there.
I'm using the ROM from OWL Project (this thread), the last version of it.
I would post there, but I don't have the post count yet.
Any advice? I'm currently repartitioning my SD card and try again. I reflashed the ROM a couple of times, fixed permissions as well from CWM.

Did you format your partition on the SD card with EXT4? INT2EXT4 only supports the ext4 file system, not ext2 or ext3. I use the INT2EXTV2 on myl WFS with the OWL ROM for a few weeks and it works without problems so far.

allandanton said:
Did you format your partition on the SD card with EXT4? INT2EXT4 only supports the ext4 file system, not ext2 or ext3. I use the INT2EXTV2 on myl WFS with the OWL ROM for a few weeks and it works without problems so far.
Click to expand...
Click to collapse
Yes, I used Ext4. I tried flashing Int2Ext, Int2Ext+, Int2ExtV2+ and Int2Ext4+ from CWM, but I was always stuck on bootloop. The only way I made it work was by extracting the script file from Int2Ext4+ and placing it in /system/etc/init.d of the ROM zip. Flashed it, it worked, but then I got this problem )
I'm thinking that maybe the FAT32 partition was not formatted correctly. So I'm doing that now.

I repartitioned the SD card and now it worked correctly. Weird is, I did the same thing as before, so I'm not really sure why it wasn't working in the first time.

DrCriss said:
I have a little problem with my WFS. I partitioned the SD card to use Int2Ext4, but the ROM keeps saying that no SD card is present, even if it does use the EXT partition. I can mount the card in CWM, I can see it's content there.
I'm using the ROM from OWL Project (this thread), the last version of it.
I would post there, but I don't have the post count yet.
Any advice? I'm currently repartitioning my SD card and try again. I reflashed the ROM a couple of times, fixed permissions as well from CWM.
Click to expand...
Click to collapse
i format the sdcard, cache, dalvik, etc then flash the script (data2sd or int2ext or int2ext+ or watever) then goto advanced then select partition sd card, select 512 MB and 0 MB for linux swap space. DONE, hope solves it for you

I have too WFS with OWL project and i dont have any problem with this
Go to recovery menu and here create partition (befor it backup sd card)
Then go to mount and storage menu > mount usb storage >connect usb cable > give cronomod on sd
Then go to install zip from sd card and instal cronomod INT2EXT+
And have more memory
After instal cronomod dont stres android start is first longer but only first then normal speed

Thanks for the answers. I did say I fixed it already by repartitioning the card. Probably I didn't format it right.

DrCriss said:
Thanks for the answers. I did say I fixed it already by repartitioning the card. Probably I didn't format it right.
Click to expand...
Click to collapse
Click thanks if i was Helpfull