Develop Bugs

[Q] Need help, HTC One X 4.2.2 stuck at boot logo

I need some help to recover my HTC One X international. I can't boot into OS, and it is stuck at HTC boot logo. I am trying to flash kernel but somehow things went bad and i cant boot, I have tried to restore RUU RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe but since my Hboot version is higher than the RUU, i got error 158. I am out of idea right now how to get my phone back alive. It Is S-ON.
this is my getvar:
version: 0.5a
version-bootloader: 1.73.0000
version-baseband: 5.1204.167.31
version-cpld: None
version-microp: None
version-main: 4.19.707.3
serialno: SH24JW111563
imei: 354461057205714
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__044
battery-status: good
battery-voltage: 3774mV
devpower: 41
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0

kolniklaus said:
I need some help to recover my HTC One X international. I can't boot into OS, and it is stuck at HTC boot logo. I am trying to flash kernel but somehow things went bad and i cant boot, I have tried to restore RUU RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_WWE_3.14.707.24_Radio_5.1204.162.29_release_296434_signed.exe but since my Hboot version is higher than the RUU, i got error 158. I am out of idea right now how to get my phone back alive. It Is S-ON.
this is my getvar:
version: 0.5a
version-bootloader: 1.73.0000
version-baseband: 5.1204.167.31
version-cpld: None
version-microp: None
version-main: 4.19.707.3
serialno: SH24JW111563
imei: 354461057205714
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__044
battery-status: good
battery-voltage: 3774mV
devpower: 41
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Click to expand...
Click to collapse
For you will work only nandroid backup nothing else go in general section download nandroid backup and install or install custom recovery like Philz and install custom rom

Thant said:
For you will work only nandroid backup nothing else go in general section download nandroid backup and install or install custom recovery like Philz and install custom rom
Click to expand...
Click to collapse
thanks so much, i am downloading nandroid backup now. After I am done with nandroid backup do i need to install custom rom?

If you want to run a custom rom you don't have to install a nandroid backup ! Go straight for a custom one.....saves time

[Q] can not install any custom rom

hi everyone...
i just messed up my boss's One x please help me out....
i was trying to install custom rom on my htc one x yet something went wrong and now i m stuck on a bootloop (all partitions (except sD) wiped several times without any backup). now i can access my custom TWRP recovery with Touch working yet i can not find any Custom rom for Main version 4.18.401.4 plus i can not restore my original stock rom.
i have done custom roms on Azame 4g but this time i m helpless for now atleast :laugh:
please guide me if u can
My phone info is
version: 0.5a
version-bootloader: 1.72.0000
version-baseband: 5.1204.167.31
version-cpld: None
version-microp: None
version-main: 4.18.401.4
serialno: HT242W106869
imei: 359188044768273
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__001
battery-status: good
battery-voltage: 3742mV
devpower: 46
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0

zainshah110 said:
hi everyone...
i just messed up my boss's One x please help me out....
i was trying to install custom rom on my htc one x yet something went wrong and now i m stuck on a bootloop (all partitions (except sD) wiped several times without any backup). now i can access my custom TWRP recovery with Touch working yet i can not find any Custom rom for Main version 4.18.401.4 plus i can not restore my original stock rom.
i have done custom roms on Azame 4g but this time i m helpless for now atleast :laugh:
please guide me if u can
My phone info is
version: 0.5a
version-bootloader: 1.72.0000
version-baseband: 5.1204.167.31
version-cpld: None
version-microp: None
version-main: 4.18.401.4
serialno: HT242W106869
imei: 359188044768273
product: endeavoru
platform: HBOOT-T30S
modelid: PJ4610000
cidnum: HTC__001
battery-status: good
battery-voltage: 3742mV
devpower: 46
partition-layout: None
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: None
hbootpreupdate: 2
gencheckpt: 0
Click to expand...
Click to collapse
install Philz 5.15.9 mount sd Card and copy your rom to sd card then flash it after this go in recovery and flash the boot.img via fastboot

[Q] Possibly stupid NANDROID question...

Okay, so I'm a Samsung Note 3 owner that's helping out a guy to unscrew his AT&T M8. We're trying to return to nandroid stock using this guide http://forum.xda-developers.com/show....php?t=2701376, and I'm at the step where it says to flash the nandroid .zip file in TWRP. This is all fine and dandy, but even though it's located in the TWRP/backups folder, and apparently it's the correct nandroid version, it FAILS immediately. Maybe I got the wrong version??? I've googled around, but I can't seem to get the right info on this one!
Any and all help would be appreciated!!!:good:

Read that thread thoroughly ...
You don't flash the nandroid.zip
You extract the nandroid.zip and transfer the content to TWRP backup folder.
Anyway ... browse thru AT&T forum, you should be able to find the correct RUU
http://forum.xda-developers.com/att-htc-one-m8/general

No RUU will flash!!!! No main version shown in RUU utility...
ckpv5 said:
Read that thread thoroughly ...
You don't flash the nandroid.zip
You extract the nandroid.zip and transfer the content to TWRP backup folder.
Anyway ... browse thru AT&T forum, you should be able to find the correct RUU
http://forum.xda-developers.com/att-htc-one-m8/general
Click to expand...
Click to collapse
I have tried a few newer RUU's since I'm on 3.16 bootloader and S-ON. When I go to flash using the RUU utility, it doesn't show any installed rom...because there IS no installed ROM!
Therefore, it fails. As you can see below...there is nothing showing in version-main. Any idea on how to fix this??? The phone isn't bricked...there's just no rom installed. Should I use TWRP instead???
version-bootloader: 3.16.0.0000
version-baseband: 1.16.21331931.LA11G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: FA43SWM04387
imei: 358718050243422
imei2: Not Support
meid: 00000000000000
product: m8_ul_ca
platform: hTCBmsm8974
modelid: 0P6B12000
cidnum: CWS__001
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: c3d94491
hbootpreupdate: 11
gencheckpt: 0

M8 stuck on bootscreen, can't boot into recovery mode

Hello, guys, I wanted to flash new version of LineageOS 14.1. today, but now I can't enter recovery, and the device is stuck on boot screen. I can enter only bootloader. I didn't flashed then new ROM I have just send boot.img of the new ROM to phone via cmd. And since I did this I can't boot into recovery. I have backup of RR ROM which I was using for more than 6 months, but I need to acces recovery for that. I was trying to flash the recovery image but it didn't work. Every help is really apreciated. Thank you.
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 1.29.214500021.12G
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
imei2: Not Support
meid: 00000000000000
product: m8_ul
platform: hTCBmsm8974
modelid: 0P6B10000
cidnum: HTC__032
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: 76df2b54
hbootpreupdate: 11
gencheckpt: 0

Troksik said:
I didn't flashed then new ROM I have just send boot.img of the new ROM to phone via cmd.
Click to expand...
Click to collapse
Why would you do this, in the first place? It's not necessary to flash boot.img separately. It flashes automatically, when you flash the ROM.
What command (exactly how you typed it), did you use to flash the boot.img? I have a feeling you flashed it to the recovery partition.

need help with a51_dtul device,get stuck in bootloop, doesn't flash, doesn't work

hi, everybody.
I wanted to flash a custom ROM on my a51_dtul device with KitKat android. but it didn't work. so I wiped cache, Dalvik and internal storage as well. in fact, nothing is in internal storage now, and won't boot any os. my device is unlocked and below is the information.
version: 0.5
version-bootloader: 3.19.0.0000
version-baseband: 01.01.010_U10305041_08.01.41222_2
version-cpld: None
version-microp: None
version-main: 1.29.1405.1
version-misc: PVT SHIP S-OFF
serialno: HC4AWYC03279
product: a51_dtul
platform: hTCBmsm8939
modelid: 0PFJ11000
cidnum: HTCCN701
battery-status: good
battery-voltage: 0mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: eae94f74
hbootpreupdate: 11
gencheckpt: 0
mfg-name:
I also downloaded the firmware from the gsmdevelopers(i can't provide the link), but the zip file is corrupted.
but you can reach the link here on number 5
but I flashed a firmware in Hboot mode and successfully done it. but still don't boot any os and any time I reset or reboot it stucks in boot loop and gets back to TWRP recovery mode. I really don't know what should I do.
I wanted to flash cm12 with a higher android version, but I loosed what I had .
if anybody has the backup for a51_dtul can upload for me? at least I can use my phone if I restore it.