Related
So I just got another new case.
I got it from eBay seller augustonline for $3.89 w/ free shipping.
http://cgi.ebay.com/Black-Rubber-Ha...000-GALAXY-S-/150475142893?pt=PDA_Accessories
This is similar to the mesh snap-on case that others have posted about. It's a single piece that snaps on to the back of the phone. The material is hard plastic but it has a bit of a rubberized feel which provides just a little grip.
The fit is perfect. And, unlike the mesh case, it does not have the awkward cutout for the TV antenna that the Korean cases have.
As others have pointed out with this type of case, it does not provide full protection for all sides. I was also concerned about this, but found that it wraps around the edges just enough to protect the face of the phone. So, if you place it face-down the phone doesn't touch. Also, the corners are protected but the top and bottom are exposed.
It's a solid color with no branding so if you really like the Galaxy S logo, you won't be able to see it with this case.
All in all, this is a nice case and if you like this type of case, I would definitely recommend it. It fits well, has a nice clean look to it, and is less than $5. I think this will be my daily driver for a while (or until some positive reviews of the SGP Slider case start coming in).
Sweet as I was wondering whether the fit would be good or not, so thats good news
Can't wait for my orange one to get here!
Cool good to know it fits perfectly i ordered a green one of these almost two weeks ago i should be receiving it any day now
The case isn't bad for $4 (or the $8 I paid from a US seller), but don't expect it to hold up for very long. The rubberized texture is wearing off after less than a week.
newstoneage said:
The case isn't bad for $4 (or the $8 I paid from a US seller), but don't expect it to hold up for very long. The rubberized texture is wearing off after less than a week.
Click to expand...
Click to collapse
I was just thinking about updating this post when I saw your reply. I noticed this morning that the rubberized coating is coming off on the corners of the case. It's not very noticeable at the moment, but I imagine it will start to peel off everywhere in the not so distant future.
For me the case is temporary until SGP gets their stuff together, but I don't think I would recommend this case to anyone that is looking for long-term protection.
that looks pretty gnarly. I have the snap on two piece case from T-Mobile. With the chrome bezel and rubbery back. Once I get bored of it I'll have to try that one.
Sent from my SGH-T959 using XDA App
Love this case so far. Especially with my custom logo! =D
There is no player on the warriors with the number 89. That's just the number I like personally.
I don't think this can be compared to mesh case. The quality of the korean mesh case is awesome. That is why it is like 20 bucks.
Sent from my SGH-T959 using XDA App
Or you could end up like me...
I was bringing my phone over to me from reaching over to get it from my back pocket, and a little slip happened and I ended up semi-tossing the phone on the ground. It was the one time I had taken the case off and well, you play with fire, you get burned.
I was wondering where it would be best to buy a hardcase for my new EVO (thank god for phone insurance), as well as screen protectors, and a charging cable (my other one has been subjected to lots of wear and tear and I have to bend it into mindboggling directions to get the phone to charge).
I'm try to go for at least bulk as possible but I still want some decent protection, any recommendations?
I bought the innocase rugged from Seido it has 180 degrww clip and a little bulky but great protection.
otterbox, ballistic and trident all seem to be the top cases for evo's.
personally, i currently recommend the trident cyclops.
sorry about your phone man.
I have had my phone since the IO conference... I haven't put anything on it... still haven't broken it
Jacka Slim Leather Cover?
I'm very happy with my Jacka slim leather cover.
Low profile slips easily in & out of my pocket & the front cover protects the screen.
catseyenu said:
I'm very happy with my Jacka slim leather cover.
Low profile slips easily in & out of my pocket & the front cover protects the screen.
Click to expand...
Click to collapse
I really like that case, where did you get it? I can only find it on ebay from a couple chinese sellers.
I personally went with a smoke colored tpu case from Luxmo. It serves hard case protection with a mix of gel case and almost not there feeling.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
naztech vertex
I like the naztech vertex cover its cheap and protects well plus comes with a screen protector. the design is similar to the case mate that has the abs over silicon
_MetalHead_ said:
I really like that case, where did you get it? I can only find it on ebay from a couple chinese sellers.
Click to expand...
Click to collapse
That's where I first spotted it but I ended up buying at Carry Mobile.
http://www.carrymobile.com/scripts/main/viewitem-O2EVO4LCJT1BKLC-EVO4.html
I'm guessing it's the same people as it shipped from Hong Kong, took almost 3 weeks.
I Have the Seidio Innocase II and holster. Just got my wife the active limited edition. One thing to watch out for with the holster is your side brushing up against something and unlatching the phone.(like your seat belt latch) Because of this, my evo took a three foot fall a few days ago. It landed on the corner and cartwheeled down my driveway. The only damage was a few scuffs on the case. This is my fourth phone with the seidio cases on them. I used to be a field service technician and I was really hard on my phones. Every phone I have had has taken several falls to concrete, dirt and rocks. I even cracked the seidio case that I had on my tour. I figured the case did its job and bought a new one. I know a lot of people like the otterbox and other cases, but I really like the seidio holster set up. Im thinking about stepping up to the extended rugged case if I get the extended battery. Don't like the idea of losing the kickstand though.
mcjx said:
and a charging cable (my other one has been subjected to lots of wear and tear and I have to bend it into mindboggling directions to get the phone to charge).
Click to expand...
Click to collapse
I bought charging cables off of amazon: http://www.amazon.com/BlackBerry-Cable-Micro-1-0m-Black/dp/B001QATRCA/ref=sr_1_1?ie=UTF8&qid=1288622783&sr=8-1 i bought 6 of them and paid around $10 after shipping.
catseyenu said:
I'm very happy with my Jacka slim leather cover.
Low profile slips easily in & out of my pocket & the front cover protects the screen.
Click to expand...
Click to collapse
catseyenu,
how does the flip cover on the Jacka model stay shut? I see a little lip on top that acts as a fastener. Does it work well? If the phone were to fall out of my hands, I would want the flap to stay shut.
dynamicpda said:
catseyenu,
how does the flip cover on the Jacka model stay shut? I see a little lip on top that acts as a fastener. Does it work well? If the phone were to fall out of my hands, I would want the flap to stay shut.
Click to expand...
Click to collapse
The leather is encasing a thin rigid (plastic?) frame that adds tension to the clasp.
I've had it about a month and it's worked well so far, the only concern I have is if the leather bands at the bottom stretch out it could become loose.
If that occurs I know a good boot maker that can fix it for me.
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
gkallivrousis said:
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
Click to expand...
Click to collapse
Truthfully verizons body glove case is best for non bulkyness.Very stable fits well .ect.
I like my body glove
Personally I have tried the Body Glove case and I like the Otter Box Commuter case a little better. The new Seidio Innocase Active is also a very nice case; a close second to the Otter Box.
Definitely otter box. Slim sturdy and stylish
Sent from my DROIDX using XDA App
one problem though it has to slide into my jeans. Most of these cases have rubber and dont slide
Throwing in a vote for the Body Glove case.. great fit with just enough bulk to give you that warm protected feeling
Sent from my DROIDX using XDA App
You should check out Techie Warehouse. If you go to the Covers & Skins area for the Droid X you'll find over 300 covers to choose from.
Best one I got laying around was not a Seidio, Otterbox or Trident... it was the Dual Layer Vertex Covers just google "techie warehouse vertex cover for droid x"
I quote from our product description about this product "The Motorola Droid X gets ultimate protection. A Screen Protector and two virtual walls of defense. The inner silicone core absorbs shock from bumps and drops. A hard polycarbonate exterior shell prevents cuts, scrapes, dings, and damage for the Motorola Droid X."
Let me know what you think of it.
i bought one of the 3 dollar black silicone ones off amazon. works fine for me..
gkallivrousis said:
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
Click to expand...
Click to collapse
I have had the Otterbox, Seidio, Innocase, Verizon, Kragen, but I didnt really like any of them. Iphone cases are so much more refined compared to these.
The Otterbox Seidio, and Kragen cases are too bulky, the Innocase looks good but broke on me, and the Verizon Kickstand Case was too cheaply made.
There is a guy from another forum thats making a phone case. It looks great but its not for sale yet, I am personally looking forward to it because he claims its easy to open and has a bunch of other features. It looks absolutely beautiful, so lets hope he can pull this off.
Right now Im using a cheap Ebay Silicone case, its not great either but it was only $2 and thats value for money. I also got a Smartphone Coaster, its a cheap bit of tin but it does the job for now.
gkallivrousis said:
Hey guys i was wondering what case you would recommend. im very picky with cases since i dont like bulking my phone up but i also dont want to worry about scratches i wish phantomskinz had something. let me know please
Click to expand...
Click to collapse
Phantomskinz does have skins for the droid X.. Check the site again!
+1 For the Body Glove
I really enjoy my Body Glove, Although I've managed to wear out the snap on the lower left side by removing the case over time to do a battery pull and it no longer holds securely.
I have a Green Trident Kraken on order, due to arrive today actually assuming UPS will brave the icy roads, Good reviews on protection but they all admit to the sacrifice of sleekness.
The pliable verizon silicone case is nice and it fits with extended battery-Motorola and cover. You can find them for $10 online or eBay.
Check ebay item #250759993717
I bought a Sedieo Innocase Surface back in December it cracked in half in January. They are really nice looking, but if you ever have to do a battery pull or if you want to use your car dock, forget about getting it out of the damn case. It fits way to tight. So I am back to the ole Silicone case, which works fine, but sucks if you put it in your pocket, cause it sticks to cloth / jean material.
I'm on my 2nd Body Glove case.
Likes: Belt clip, rubber texture, light weight
Dislikes: Rubber texture deteriorates, weak tabs will not survive impact.
It has kept my DX from scratches but the tabs that snap it together break too easily. First was replaced under warranty. I think I will kick out the $ for an Otter.
OnMy2ndGP said:
I'm on my 2nd Body Glove case.
Likes: Belt clip, rubber texture, light weight
Dislikes: Rubber texture deteriorates, weak tabs will not survive impact.
It has kept my DX from scratches but the tabs that snap it together break too easily. First was replaced under warranty. I think I will kick out the $ for an Otter.
Click to expand...
Click to collapse
Those cases with tabs that snap together aren't meant to be taken apart, after 4 or 5 times they will break. I created a case that opens easily, has no tiny tabs to break and has a multitude of other features.
I've also taken great care to make sure that the case is placed further away from the screen and buttons making it easy to touch the screen and press the buttons on the bottom.
There's space for the OEM extended battery, an extra micro SD card, and even an ID or credit card.
The case also functions as a stand and car mount, my case allows you to watch movies, make movies, capture photos, and use your phones GPS in your car with ease. These features not only work with the Motorola Droid X but with other cases, other phones, and even some other electronic devices such as digital cameras.
The case isn't any more expensive then other high quality cases either. Its 20 bucks and made from the same high strength plastic as other high end cases, so basically if your in the market for a case and other accessories you can pay for just the case and get the rest for free essentially.
If you think this case must be huge and weigh a lot you'd be surprised, its really a simple concept, its almost like a normal cellphone case but we've changed a the design a bit to allow it to function as an adjustable stand.
I can't post links yet so you'll have to google "Jawcase" to find more info, pics, and videos.
I like the Jawcase concept. Alot. I pledged. And good luck with getting your project off the ground Heather. Hope it gets funded.
I've gone through 3 body gloves now with my 4th's clips are broken yet again....
I think its a bit ridiculous that I cant take my phone case off because the clips can't stand it.
I need to find a new case, and I'm thinking of just going with one of the hard-ish silicone cases. The body glove looks great when you buy it, but the rubber wears away like no tomorrow and the clips are destroyed after a couple battery pulls. I had one for my enV touch and it lasted the entire lifespan of the phone with minor tears and such. My droid x's can't last anymore than maybe a month. Don't get me wrong, the body gloves are wonderful, but I'm clearly not having a good experience with it or maybe I'm not handling it properly
+1 for the body glove case. I havent had any issues with the tabs, but i always open it at the bottom with a coin.
Riddlin said:
I bought a Sedieo Innocase Surface back in December it cracked in half in January. They are really nice looking, but if you ever have to do a battery pull or if you want to use your car dock, forget about getting it out of the damn case. It fits way to tight. So I am back to the ole Silicone case, which works fine, but sucks if you put it in your pocket, cause it sticks to cloth / jean material.
Click to expand...
Click to collapse
Shoot...I was pretty much sold on the Innocase Surface case, was gonna order one in the next few days. I've tried the cheap TPU case, the cheap 2-piece snap together case, maybe I'll try the Verizon silicon one instead of the Innocase.
I like my phone to be protected really well.....Have a look
1. Official Samsung Flip Case
2. Cheap S-Curve TPU case from eBay --> I bought this extra CHEAP case so I can experiment and cut it to fit the Flip Case. It's not the best cutting job, but it will do the job for now
3. Home made Phone Sock
I guess I will use this set up until the flip case dies, by then I will start using the Nillkin TPU Case.
ps. I really like the Nillkin ones...they are thin and fits the GNote really well
Great job. I'm still waiting for my TPU case to arrive so I can try this. Instead of the sock, I'll try a tiny short strip of velcro to keep the flip shot.
DMax99 said:
I like my phone to be protected really well.....Have a look
1. Official Samsung Flip Case
2. Cheap S-Curve TPU case from eBay --> I bought this extra CHEAP case so I can experiment and cut it to fit the Flip Case. It's not the best cutting job, but it will do the job for now
3. Home made Phone Sock
I guess I will use this set up until the flip case dies, by then I will start using the Nillkin TPU Case.
ps. I really like the Nillkin ones...they are thin and fits the GNote really well
Click to expand...
Click to collapse
You beat me to it lol.
I was thinking about doing this, for the exact same reason as yourself. Just a quick question, does the cover fold all the way back like it would without the TPU case installed?
RavenY2K3 said:
You beat me to it lol.
I was thinking about doing this, for the exact same reason as yourself. Just a quick question, does the cover fold all the way back like it would without the TPU case installed?
Click to expand...
Click to collapse
yeah, it does. the cover can bend all the way down to the edge of the tpu cover.
just did something similar. cut side off the tpu gel case, stretched the gel case to fit the slightly thicker flip case back cover.
it works, but the tpu case loses some of its rigidity when you cut it, it wont stick as well to the phone.
Souai said:
just did something similar. cut side off the tpu gel case, stretched the gel case to fit the slightly thicker flip case back cover.
it works, but the tpu case loses some of its rigidity when you cut it, it wont stick as well to the phone.
Click to expand...
Click to collapse
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
tamarian said:
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
Click to expand...
Click to collapse
doing it that way would then cause the the flip cover to lose some durability.
by cutting the tpu case to fit the flip case as is, you still leave 1.5cm of gel case around the corners, which is enough for the phone to hold the case on. the only point of weakness lies in the flip case making the phone's rear thicker. by cutting one side of the tpu case and having to wrap it around a thicker phone will kinda distort the tpu case a little.
its not enough to make it fall off that easily, at least not now. but its not as rigid compared to tpu case uncut and i'd expect it to become a little loose with wear and tear.
Yo, sup dawg, I herd you like cases, so I put a case in your case so you can put another case while you using a case in a case.
tamarian said:
I think the best way is to avoid cutting near the corner. Instead of cutting the gel case to suit the flip cover, cut some of the leather flap to make it shorter/narrower, then you cut the gel case to fit it (just below the volume rocker. Here's a pic:
Click to expand...
Click to collapse
hehe...this is actually a good idea too...
victorlht88 said:
This is honestly quite retarded..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
you do realize that a lot of cases out there are cases in cases, right?
For example OtterBox
DMax99 said:
you do realize that a lot of cases out there are cases in cases, right?
For example OtterBox
Click to expand...
Click to collapse
lol, for my motorola atrix, i had the ballistic hardcore case. you get the core plastic+tpu case with screen protector integrated, and then a silicone skin that can fit on the outside, and then a beltclip/screen guard. when you run the inner case and silicone skin together, the device is water-resistant.
but honestly, i dont see why people think what we're doing is silly.
the flip cover is good for protecting the screen, but doesnt protect the corners. protecting the corners is important because statistically, if you were to drop your phone, its 90+% more likely to land on a corner first than flat on its face. the vibrations of the drop are then going to transfer into the device's internals, which can do a bit of damage, hence you need protection for the corners.
the tpu case is good for protecting the device itself but offers no real protection from the screen aside from preventing it from getting damaged if it were to land flat face down. if your screen were to land on a corner of a table, you'd be screwed.
by combining the cases, you get the best of both worlds protection wise.
Souai said:
lol, for my motorola atrix, i had the ballistic hardcore case. you get the core plastic+tpu case with screen protector integrated, and then a silicone skin that can fit on the outside, and then a beltclip/screen guard. when you run the inner case and silicone skin together, the device is water-resistant.
but honestly, i dont see why people think what we're doing is silly.
the flip cover is good for protecting the screen, but doesnt protect the corners. protecting the corners is important because statistically, if you were to drop your phone, its 90+% more likely to land on a corner first than flat on its face. the vibrations of the drop are then going to transfer into the device's internals, which can do a bit of damage, hence you need protection for the corners.
the tpu case is good for protecting the device itself but offers no real protection from the screen aside from preventing it from getting damaged if it were to land flat face down. if your screen were to land on a corner of a table, you'd be screwed.
by combining the cases, you get the best of both worlds protection wise.
Click to expand...
Click to collapse
maybe because they are not poor like me
Souai said:
but honestly, i dont see why people think what we're doing is silly.
Click to expand...
Click to collapse
I'm with you on this, Considering I paid more for this phone than I paid for my Galaxy Tab 10.1 3G (coz I couldn't wait for it to be officially released lol) I'm gonna protect the hell out of this thing.
RavenY2K3 said:
I'm with you on this, Considering I paid more for this phone than I paid for my Galaxy Tab 10.1 3G (coz I couldn't wait for it to be officially released lol) I'm gonna protect the hell out of this thing.
Click to expand...
Click to collapse
i agree there.
about 6 months ago i bought my motorola atrix for $500. to me, spending $40 on a ballistic hardcore case is cheap insurance for a $500 phone.
and a few weeks ago i spent $800 on my galaxy note (now some places are selling it for $600), to me, $30 is cheap insurance to ensure it continues running well. although i would prefer another ballistic hardcore case, i dont think ballistic have any plans for the note.
Souai said:
i agree there.
about 6 months ago i bought my motorola atrix for $500. to me, spending $40 on a ballistic hardcore case is cheap insurance for a $500 phone.
and a few weeks ago i spent $800 on my galaxy note (now some places are selling it for $600), to me, $30 is cheap insurance to ensure it continues running well. although i would prefer another ballistic hardcore case, i dont think ballistic have any plans for the note.
Click to expand...
Click to collapse
yeah...there aren't that many good Case Company that have plans for our Note
I wish casemate would make a tough case for the note. I loved them for my gs and gs II. They had a thin flexible silicone sleeve that went around the phone then a hard outer shell that went around the silicone.
great freaking case.
I should be updating this post to Quadruple Protection...because I have just put the Skinomi Carbon Fibre Skin on it this Friday.
and I must say the skinomi skin is Great!
one particular advantage about the way i have it set up...
the friction of the tpu gel case means it doesnt slide, meaning i can use the flip cover as a stand.
Souai said:
one particular advantage about the way i have it set up...
the friction of the tpu gel case means it doesnt slide, meaning i can use the flip cover as a stand.
Click to expand...
Click to collapse
Nice....Is that the S-Curve TPU?
Do you find the unlock button hard to press?
http://www.ebay.com.au/itm/ws/eBayISAPI.dll?ViewItem&item=140637892999&ssPageName=ADME:L:OC:AU:1123
the case i bought was this one.
it is slightly harder to press the power button, but thats mainly because of the way im using the case. the phone is slightly thicker when you use the samsung flip cover, so the gel case has to be stretched a little. on the case, theres a slightly softer rubber/plastic gap for the power button which works well normally, but since the case is stretched a little, it is slightly off center for the power button. not enough to cause problems, but enough to notice a bit of a difference.
but overall, i'd say it works well. gel case + screen protector + flip cover = ready to take this thing when i go paintballing!
I began using a Seidio Surface case on my GS3 and I LOVED it. Phone has survived many drops from lap while getting out of my somewhat raised truck, and quite a few from pants pocket level while standing. Never had a cracked screen, even on corner drops. Love the soft grip, thinness of the case, and that it doesn't grab onto pocket fabric when you're trying to get it out.
Ordered my Nexus 5 on day one. Got a cheapo case just out of paranoia because Seidio didn't have the Surface out yet. Hate it. HATE IT. Been checking the Seidio site everyday for the release. Checked last night when I got home from work....and saw that they are now shipping.
Black is the only color currently shipping. I've got my order in. Obviously I haven't received it yet.
There's a 15% off coupon code you can use through 12/06/2013: SURFACE15
I figured there are others out there that want this case, so I thought I'd post.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
Pig Vomit said:
I began using a Seidio Surface case on my GS3 and I LOVED it. Phone has survived many drops from lap while getting out of my somewhat raised truck, and quite a few from pants pocket level while standing. Never had a cracked screen, even on corner drops. Love the soft grip, thinness of the case, and that it doesn't grab onto pocket fabric when you're trying to get it out.
Ordered my Nexus 5 on day one. Got a cheapo case just out of paranoia because Seidio didn't have the Surface out yet. Hate it. HATE IT. Been checking the Seidio site everyday for the release. Checked last night when I got home from work....and saw that they are now shipping.
Black is the only color currently shipping. I've got my order in. Obviously I haven't received it yet.
There's a 15% off coupon code you can use through 12/06/2013: SURFACE15
I figured there are others out there that want this case, so I thought I'd post.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
Click to expand...
Click to collapse
I am thinking of buying one. This will be my first seidio case. Can you please tell me the difference between surface and dilex versions?
Pig Vomit said:
I began using a Seidio Surface case on my GS3 and I LOVED it. Phone has survived many drops from lap while getting out of my somewhat raised truck, and quite a few from pants pocket level while standing. Never had a cracked screen, even on corner drops. Love the soft grip, thinness of the case, and that it doesn't grab onto pocket fabric when you're trying to get it out.
Ordered my Nexus 5 on day one. Got a cheapo case just out of paranoia because Seidio didn't have the Surface out yet. Hate it. HATE IT. Been checking the Seidio site everyday for the release. Checked last night when I got home from work....and saw that they are now shipping.
Black is the only color currently shipping. I've got my order in. Obviously I haven't received it yet.
There's a 15% off coupon code you can use through 12/06/2013: SURFACE15
I figured there are others out there that want this case, so I thought I'd post.
http://www.seidioonline.com/LG-Google-Nexus-5-s/9164.htm
Click to expand...
Click to collapse
Getting the Dilex, I think used to be called the ACTIVE accessories because they can accommodate more sizes of cases. The SURFACE15 only works for surface items (Duh), but I found a twitter discount code for 10% off anything - TW10. I am only buying the Dilex holster at this point.
psy_spy said:
I am thinking of buying one. This will be my first seidio case. Can you please tell me the difference between surface and dilex versions?
Click to expand...
Click to collapse
All I know about the differences is from the descriptions on their website. I like using the thinnest cases possible...hate bulk. So for me, since the Surface is thinner, that's what I'm going with, since I know the Surface provides adequate protection for all my needs.
Here are the descriptions from Seidio's website:
Our SURFACE™ case is thin and sleek, perfect for those who want to shield their device from everyday wear. Depending on the device's size and dimensions, the case either snaps or slides together. Precision cut-outs allow access to all ports and controls, and the case is finished with our signature soft-touch coating that doesn't attract lint and slides easily in and out of your pocket or purse.
Designed for those with an on-the-go lifestyle, our DILEX™ case provides great shock and impact absorption. With two layers, our DILEX™ case is slightly thicker than our SURFACE™ case. The DILEX™ Skin, the first layer, is a highly durable polymer that covers vital ports and controls. The second layer, which is the DILEX™ Skeleton, fits over the DILEX™ Skin and provides extra protection at impact points such as corners and sides.
https://www.seidioonline.com/Articles.asp?ID=157
Looks like it retains the shape of the device, but adds some thickness like the neo hybrid. Worth considering.
tebower said:
Looks like it retains the shape of the device, but adds some thickness like the neo hybrid. Worth considering.
Click to expand...
Click to collapse
Yes the Dilex or I am used to calling it the ACTIVE cases, which are thicker because there is a top piece, usually plastic that covers a portion of the softer case, thus making it thicker. Great protection and one of the better cases for drop protection IMO. However, I have just been using the Dilex/Active holsters as a belt holster in combination of various tpu cases.
kpjimmy said:
Yes the Dilex or I am used to calling it the ACTIVE cases, which are thicker because there is a top piece, usually plastic that covers a portion of the softer case, thus making it thicker. Great protection and one of the better cases for drop protection IMO. However, I have just been using the Dilex/Active holsters as a belt holster in combination of various tpu cases.
Click to expand...
Click to collapse
How do the Dilex and Surface stand up to lint? i love soft-touch but silicone is a lint trap, and I absolutely HATE the look of lint and the time it takes to get the lint off.
droid_<3er said:
How do the Dilex and Surface stand up to lint? i love soft-touch but silicone is a lint trap, and I absolutely HATE the look of lint and the time it takes to get the lint off.
Click to expand...
Click to collapse
No lint problem whatsoever with the Surface. Can't vouch for the Dilex.
droid_<3er said:
How do the Dilex and Surface stand up to lint? i love soft-touch but silicone is a lint trap, and I absolutely HATE the look of lint and the time it takes to get the lint off.
Click to expand...
Click to collapse
The Dilex/Active uses the same material, they just add pieces for added protection. As for lint, no issue at all. And I have very linty pockets lol.
Did anyone receive the Surface yet? I really want see how it looks before I buy it.
thanks!
Seidio is great. I'll wait till they hit amazon though for better pricing.
Sent from my Nexus 5 using Tapatalk
Love Seidio cases, been using for years.
No lint problem whatsoever with the Active now the Dilex.
I used an Active case for my Galaxy Nexus and it was great.
I wouldn't mind getting another but need to know if the wireless charging will work through the case. They only say NFC works through the cases and nothing and wireless charging.
Time will tell tho when people here start getting their cases in.
I was just going to report this myself and they are now showing at amazon although only the black can be ordered, same as the manufacturer website. I had one of the surface cases on my N1 and my wife had it on the sgs at the same time. On the N1 the case worked well and the phone did survive a few drops undamaged. It worked less well on the sgs. As some of you might recall that phone was flimsy and the two piece nature of the surface combined with that flimsiness was a bad combo. The entire case/phone combo would move around allowing the case to abrade her phone a little bit and it simply felt bad. Exact opposite of the N1 where it felt very good and did not move or abrade the phone in any way. Mine did collect a little lint from some fabrics but nothing like some gel cases I've had. I'm guessing most would be ok with the lint factor and in reviews I've seen few complaints.
I've decided to go ahead and order the dilex version to give it a try and amazon is showing an after xmas delivery timeframe. Right now I have the ne-hybrid which is ok but not exactly confidence inspiring.
krabman said:
I was just going to report this myself and they are now showing at amazon although only the black can be ordered, same as the manufacturer website. I had one of the surface cases on my N1 and my wife had it on the sgs at the same time. On the N1 the case worked well and the phone did survive a few drops undamaged. It worked less well on the sgs. As some of you might recall that phone was flimsy and the two piece nature of the surface combined with that flimsiness was a bad combo. The entire case/phone combo would move around allowing the case to abrade her phone a little bit and it simply felt bad. Exact opposite of the N1 where it felt very good and did not move or abrade the phone in any way. Mine did collect a little lint from some fabrics but nothing like some gel cases I've had. I'm guessing most would be ok with the lint factor and in reviews I've seen few complaints.
I've decided to go ahead and order the dilex version to give it a try and amazon is showing an after xmas delivery timeframe. Right now I have the ne-hybrid which is ok but not exactly confidence inspiring.
Click to expand...
Click to collapse
Do you have a link to the amazon page? I can't find it... thanks!
I'm sorry but I just tried and it appears they have taken the pages down since I put my order in last night.
kpjimmy said:
Getting the Dilex, I think used to be called the ACTIVE accessories because they can accommodate more sizes of cases. The SURFACE15 only works for surface items (Duh), but I found a twitter discount code for 10% off anything - TW10. I am only buying the Dilex holster at this point.
Click to expand...
Click to collapse
I just ordered a Surface Holster. I intend to use it with my TPU cases as this is the same setup I used with my EVO for work and loved it. Surface holster with a cruzerlite case is all i needed!.
Is there going to be an OBEX version for the nexus 5? That's a case I'd feel confident with.
Sent from my Nexus 5 using xda app-developers app
yocubed said:
I just ordered a Surface Holster. I intend to use it with my TPU cases as this is the same setup I used with my EVO for work and loved it. Surface holster with a cruzerlite case is all i needed!.
Click to expand...
Click to collapse
I ordered the S4 active phone surface holster from android central and it fits perfectly with a TPU Case. Got like 25% off of the seidio price.
Anyone get the Dilex case yet and try it with wireless charging?