Anyone know if I can use ANT + devices with the G4 ? I haven't gotten mine yet and I need to order a unit for my bike.
Related
Hello Universalowners!
I got a really big Problem. My Universal falled down 4 month ago. Because of that the USB-Connector broke out. Till yesterday that was no problem. My Universal worked pretty good. Under Windows, I was able to connect to my device by Bluetooth.
No here comes my problem.
Yesterday I booted up my device and I dont know why, it came up in bootloader mode.
I tried every key combination, but it does not reboot back to windows. Even Both softkey+reset does not work.
My friend owns an universal too, and we tried to back up his rom to sd card with mtty. The d2s command is locked on his device. There is no chance to backup his rom to sd card.
That would be my only chance to get my universal back to life.
The change of the usb connector would cost me a lot Euros.
I really don´t need the usb connection if I have a running system.
I charge my batteries by an external device and everything else I can do by bluetooth or infrared.
So please tell me, what I can do, to get my problem solved. I heared something about the tool itsutils.exe with rapi enabler on my friends device. But I really do not know, how I have to handle this.
Could someone send me the image, which I can write to sdcard with my laptop?? Please help me. I need my universal like the air to live!
Hope I will get a soon answer from you!! Thank you in advance!!!!!!
Don't o2 Germany do an insurance plan like o2 UK?
If I were you I'd buy the connector for the Euro or so it will cost, and solder it in myself. But of course, if it goes wrong you'll have fried your XDA with no backup. Can't you just call o2, take out insurance, then about a month later, "Lose" it?
i'm going to buy a defective Universal / MDA Pro on monday. It's been sold without battery or anything, so just the pda. So if i buy another battery, and put it in, how is the chance, that this device still works? I think, i may be impossible to erase the rom, so there has to be at least the bootloader on it, right? So it has to be possible to flash it to WM6 (or 6.1), right? (I don't want to keep WM5 (if it would still be on that device), as i need SDHC-Support.)
What about the tournable display, is there a risk, that any connections between TFT and device/keyboard can be broken?
thanks in advance for any answer.
If there is not some hardware problem over the motherboard, it may be powers on with а new battery About the screen - just power it up and let's see
well, thanks for the info, i just bought one, so it may arrive this week. (spend a few more bucks as i wanted, but though i didn't buy a defective one, so i bought a working one, so it might be easy to upgrade.)
Anyone - if you have old non-functioning QTEK 9000 and suspect that LCD still could be working - pls let me know - today I broke my (still suffer..)
V
I need the display cord - how much r u willing to charge for it
I got my old Uni going for spares, if you are still needing parts.
Tech-Aps said:
I got my old Uni going for spares, if you are still needing parts.
Click to expand...
Click to collapse
I would recommend to request moving this to marketplace so there you´ll have more chances to help users to reach you
Hey guys.
I am about to buy HOX and it would be nice to know what problems should I look for after I get it (so if I have a faulty unit I could get it replaced in the store immediately). I want to know this since I'm getting the phone from Prague and I don't live there (if anyone got the phone there please give some feedback).
P.S Is there any possibility to use warranty straight with HTC (for possible fixes) and not the company that sold the phone?
Hi
The other day I was looking for cell ID info on my LG G4 that I have had for a long time in the "hidden menus". I accidentally clicked on the radio test and the screen froze up. I tried to get out of it, but noting would work, not even the power button. After a few minutes, I saw the power off sequence. When I went to turn if back on, it would not power on. I plugged it in, no charge. I tried to boot to recover, nothing. I have the service manual for the h815 variant which differs from mine. I do not have a boardview or anything.
I know trying to permanently fix it is a lost cause, it is old and it had other problems, such as the headphone jack not working even after I replaced it, and the read camera's autofocus being stuck after I replaced it with a cheap knockoff. However, I want to get it running long enough to get important things off of it. I was foolish and a few of my 2FAs are only on that device, and while I have gotten most of them switched to my alternate, I need to make sure to get the rest. I'm not sure which troubleshooting route to follow: Power? Crash/No Boot? No charge? I would follow each but some of the differences between the board I have and the service manual includes a few of the test points I need. Currently I have to attach wires to my multimeter leads to get small enough tips.
If anyone has anything that can help me get this running for a bit, let me know please.\
edit: biggest problem is I don't know how to tell from the schematic what pin is which on the board
Catt0s said:
Hi
The other day I was looking for cell ID info on my LG G4 that I have had for a long time in the "hidden menus". I accidentally clicked on the radio test and the screen froze up. I tried to get out of it, but noting would work, not even the power button. After a few minutes, I saw the power off sequence. When I went to turn if back on, it would not power on. I plugged it in, no charge. I tried to boot to recover, nothing. I have the service manual for the h815 variant which differs from mine. I do not have a boardview or anything.
I know trying to permanently fix it is a lost cause, it is old and it had other problems, such as the headphone jack not working even after I replaced it, and the read camera's autofocus being stuck after I replaced it with a cheap knockoff. However, I want to get it running long enough to get important things off of it. I was foolish and a few of my 2FAs are only on that device, and while I have gotten most of them switched to my alternate, I need to make sure to get the rest. I'm not sure which troubleshooting route to follow: Power? Crash/No Boot? No charge? I would follow each but some of the differences between the board I have and the service manual includes a few of the test points I need. Currently I have to attach wires to my multimeter leads to get small enough tips.
If anyone has anything that can help me get this running for a bit, let me know please.\
edit: biggest problem is I don't know how to tell from the schematic what pin is which on the board
Click to expand...
Click to collapse
Sounds like the ilapo but as you have modified the hardware it can be everything of course . anyways it wouldn't hurt to try some of the Bootloop fixes which you can find in my signature . Your best chance might be flashing the TWRP version for the ilapo and trying to load the recovery. Another option is of course to get into download mode and use salt to backup the user data partition.
Ilapo TWRP (when your device is unlocked only):
https://leech.binbash.rocks:8008/TWRP/ILAPO-O/
SALT (included in mAid / fwul): http://bit.do/FWULatXDA
Sent from my OnePlus 7T Pro using XDA Labs