Please if someone knows how and can upload it to MEGA?
I Hard Bricked my phone,I deleted something and shut it down,couldnt power it up after that ...I'm trying everything,there's no LED while charging,can't hard reset it,the little button near the SIM card does nothing...my pc once recoqnized it as SEMC;but after that can't install the driver "USB Device Not Recognized"
Bloody SONY does have all drivers except for the T3
PLEASE HELP
PashaIV said:
Please if someone knows how and can upload it to MEGA?
I Hard Bricked my phone,I deleted something and shut it down,couldnt power it up after that ...I'm trying everything,there's no LED while charging,can't hard reset it,the little button near the SIM card does nothing...my pc once recoqnized it as SEMC;but after that can't install the driver "USB Device Not Recognized"
Bloody SONY does have all drivers except for the T3
PLEASE HELP
Click to expand...
Click to collapse
If you're not getting device response try power button + vol up till you get a vibration, dont stop holding the buttons until 3 vibrations.
why do you need the drivers... im not understanding
vmlc said:
If you're not getting device response try power button + vol up till you get a vibration, dont stop holding the buttons until 3 vibrations.
why do you need the drivers... im not understanding
Click to expand...
Click to collapse
I tried
I need the drivers so I can manually istall it for the "UNKNOWN DEVICE"
PashaIV said:
I tried
I need the drivers so I can manually istall it for the "UNKNOWN DEVICE"
Click to expand...
Click to collapse
http://developer.sonymobile.com/downloads/drivers/
I cant find T3 on the list, but it should be there..
vmlc said:
http://developer.sonymobile.com/downloads/drivers/
I cant find T3 on the list, but it should be there..
Click to expand...
Click to collapse
That's why I need someone to upload it
PashaIV said:
That's why I need someone to upload it
Click to expand...
Click to collapse
I think I've never installed any specific drivers, and I could performe some actions pc-phone...
Exact, the drivers are included in the phone, so if it couldn't be discoverd by your PC, i think the only way is to reflash the complete ROM.
for that, the best is to use Emma who recognise automaticaly the right phone. ther is no need of driver because you connect in fastboot mode, and drivers are included in the emma's package.
Always make backup before playing with root access ?
Related
I flashed my Diamond to many firmwares before but today after flashing it to Memo's WM 6.1 I cant seem to flash to anything else... I tried every single version of hard spl and its either connection error or nothing happens... i tried mitty but when i connect my phone to the USB, it still says serial not USB...
Im new to this, atm just generally confused... someone help?
It looks like you USB interface is broken or your cable is not OK.
Try some other cable if possible.
Otherwise, do you have a DIAMIMG.NBH file in the root of your storage? If yes, you can flash it directly from internal storage and then examine your USB.
iXiR said:
It looks like you USB interface is broken or your cable is not OK.
Click to expand...
Click to collapse
or maybe you just dont have drivers for usb bootloader installed ?
-
vicai said:
or maybe you just dont have drivers for usb bootloader installed ?
Click to expand...
Click to collapse
not sure what u mean... if i used the 2003 driver uploaded by the forum it doesn't show USB (just serial). but if i use the official version i get USB.
and just to confirm the flashing buttons are : hold down volume key, press back and reset?
-
ok sorry for the big fuzz, ignore my stupidity...
i was pressing the hang off button instead of the back key for the entire day XD
but still got a problem... the screen just says loading and i do have the DIAMIMG.NBH in my root...
megabeater said:
ok sorry for the big fuzz, ignore my stupidity...
i was pressing the hang off button instead of the back key for the entire day XD
but still got a problem... the screen just says loading and i do have the DIAMIMG.NBH in my root...
Click to expand...
Click to collapse
no need, pred vol down (no back key) when you get the usb in bootloader, start the cursomtruu.exe from the rom you have downloaded, next next next finish
Hello! I have an Xperia Arc ICS 4.0.3 (4.1.A.0.562), I want to unlock my bootloader, but I can't enter in Fastboot, I tried many times (switched phone off, I pressed & hold Menu button and then I connected the USB cable), but don't occur as seen in all tutorials. Turns Sony logo, and blue light flashes only once and the Sony logo remains same. Please help me, as you know almost all, if you have not unlocked bootloader can not really do anything.
you have to hold the right ''options'' button not the home butten
____________________
hit thanks if i helped you
LegendSmoker said:
you have to hold the right ''options'' button not the home butten
____________________
hit thanks if i helped you
Click to expand...
Click to collapse
I know that the menu button is the bottom right
maybe move out the battery wait 30 sec put the battery back in the phone and try then angain
sorry for bad english
Had similar problem once. If its the same, you dont have the drivers installed.
In my case the phone also didnt enter the fastboot mode, LED flashed blue once and the phone kept booting.
Try this thread http://forum.xda-developers.com/showthread.php?t=1582554
or look for fastboot drivers in the forum!
hope i could help!
Ya install fastboot drivers from Flashtool/drivers.
U will be fine.
Arcman™ [email protected] LT15i using Tapatalk 2
Antochrist said:
Had similar problem once. If its the same, you dont have the drivers installed.
In my case the phone also didnt enter the fastboot mode, LED flashed blue once and the phone kept booting.
Try this thread http://forum.xda-developers.com/showthread.php?t=1582554
or look for fastboot drivers in the forum!
hope i could help!
Click to expand...
Click to collapse
Thanks for this link, but I don't know how to install these drivers
dns.vlad said:
Thanks for this link, but I don't know how to install these drivers
Click to expand...
Click to collapse
Did you read the thread? its right here
Velcis Ribeiro said:
Pull up the Windows 8 Main Screen and type, System Configuration, or right-click at Computer. Go at Devices, found you Unrecognized device, right-click on it and Update... "" Than put manually installs... and select the folder.
Click to expand...
Click to collapse
Its the same on Win7 etc. Go to System Configuration -> Device Manager (not sure how its called in english) -> Look for your Arc -> right click -> Install drivers manualy -> show the destination of the fastboot driver folder. :fingers-crossed:
Well something like that... not sure since I'm on Linux.
:crying: Hi there, yesterday i tried to remove cwm from my galaxy gt-i8150 and i've referred to many solution they mentioned that do it same way as how i flashed cwm...but at last i failed, my SGW do turn up when i press the power button but it stuck at "Warning!! A custom OS can cause......." there have prompt to press volume up or down and a triangle exclamation mark at below (i dont know whether this is download mode or not)
When i pressed volume down button it reboot and then come back to this screen again, i've tried many times pressing volume down button and pull out & place back my battery, it still shown up this screen allover again. I viewed other unbricking solution thread but didn't found any situation same as mine. When i pressed volume up button nothing happen, i can't boot into recovery mode. please help ...:crying::crying::crying:
http://androidforums.com/galaxy-y-a...ne-using-odin-v1-85-also-fixes-bootloops.html
This link will help. But it's for galaxy Y. Download the stock ROM. (Its in the galaxy W forums) Boot into download mode is pressing Power button, Volume down and Menu button. Good luck mate.
patrickdass said:
This link will help. But it's for galaxy Y. Download the stock ROM. (Its in the galaxy W forums) Boot into download mode is pressing Power button, Volume down and Menu button. Good luck mate.
Click to expand...
Click to collapse
thanks for response sir, i already viewed many thread that were talking about this method, but the problem is when i press the power button to switch on my phone, it straight away goes to download mode after samsung logo shown up, i dont even have to use combo press to boot into download mode.
And nothing happen when i press volume up button that stated "continue" but volume down button do restart my phone and boot into download screen again. When i plugged in USB, pc couldn't detect my phone.. any solution..?
will_wl said:
thanks for response sir, i already viewed many thread that were talking about this method, but the problem is when i press the power button to switch on my phone, it straight away goes to download mode after samsung logo shown up, i dont even have to use combo press to boot into download mode.
And nothing happen when i press volume up button that stated "continue" but volume down button do restart my phone and boot into download screen again. When i plugged in USB, pc couldn't detect my phone.. any solution..?
Click to expand...
Click to collapse
try to install CWM again on your mob by using odin .. your mob should be detected when you press continue if you install Samsung drive on your pc
Ahmed.ragab said:
try to install CWM again on your mob by using odin .. your mob should be detected when you press continue if you install Samsung drive on your pc
Click to expand...
Click to collapse
yeap i do installed samsung driver on my pc from kies, but when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
will_wl said:
yeap i do installed samsung driver on my pc from kies, but when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
Click to expand...
Click to collapse
did you pressed continue while you are in download mode ?
Ahmed.ragab said:
did you pressed continue while you are in download mode ?
Click to expand...
Click to collapse
Yes i did
boot into download mode, then connect usb, windows show unknow device, odin not detected
will_wl said:
Yes i did
boot into download mode, then connect usb, windows show unknow device, odin not detected
Click to expand...
Click to collapse
I will upload Samsung drive for you to try
Ahmed.ragab said:
I will upload Samsung drive for you to try
Click to expand...
Click to collapse
Thankyou dude. Appreciate your reply
will_wl said:
Thankyou dude. Appreciate your reply
Click to expand...
Click to collapse
welcome Bro
here it is
http://www.mediafire.com/download/dg0s1jff9lmmgii/Samsung_Galaxy_W_Drivers.exe
Ahmed.ragab said:
welcome Bro
here it is
http://www.mediafire.com/download/dg0s1jff9lmmgii/Samsung_Galaxy_W_Drivers.exe
Click to expand...
Click to collapse
Too bad it still not working Thanks anyway.
Currently using windows 8, i think this is windows vista package? Should use driver for windows 8?
i seek into device manager and found Samsung Mobile Composite Device with exclamation mark on it, it say 'Device Cannot Start (Code 10)'
i spent my whole day on this problem already yet still haven't found a method to solve it :crying::crying:
will_wl said:
i seek into device manager and found Samsung Mobile Composite Device with exclamation mark on it, it say 'Device Cannot Start (Code 10)'
i spent my whole day on this problem already yet still haven't found a method to solve it :crying::crying:
Click to expand...
Click to collapse
I think as it is able to go in download mode there is a hope .. don't worry will be fixed
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1467128
And download the firmware for your country from sammobile
Try to install adb driver (but first remove samsung usb driver if are installed)follow this guide:http://technologyandroid.com/2013/0...river-adb-di-qualsiasi-dispositivo-android-2/(it's in italian language)
then install samsung usb driver and check if odin recognize the device.
I have tried this guide yesterday for galaxy s2 and it works.
If after that don't works try to change the usb port , open odin by run as administrator and don't reboot odin.
Redwraith96 said:
Try to install adb driver (but first remove samsung usb driver if are installed)follow this guide:http://technologyandroid.com/2013/0...river-adb-di-qualsiasi-dispositivo-android-2/(it's in italian language)
then install samsung usb driver and check if odin recognize the device.
I have tried this guide yesterday for galaxy s2 and it works.
If after that don't works try to change the usb port , open odin by run as administrator and don't reboot odin.
Click to expand...
Click to collapse
when i click on the download link ads window pop-out and download does not go on, any idea?
miki2o said:
Follow this tutorial: http://forum.xda-developers.com/showthread.php?t=1467128
And download the firmware for your country from sammobile
Click to expand...
Click to collapse
Thankyou for trying to help
but seems like u don't get what is my problem now, when im in download mode and plugged in usb windows message pop out "The USB device attached to the computer has malfunctioned and Windows does not recognize it." Whereas in odin when i click start is says "please connect phone"
will_wl said:
when i click on the download link ads window pop-out and download does not go on, any idea?
Click to expand...
Click to collapse
install the latest USB drivers from here:http://uploaded.net/file/xdloq4jw (after installing the adb driver!!)
Windows 8 has major problems with compatibility with Odin ......that is probably the issue here.......
Try a PC with an older OS (preferably XP but vista or 7 should work)
If you're using vista or 7, run Odin as administrator.
If XP, run normally.
Then......
Make sure....
1) kies is NOT running (kill in task manager)
2) any installed firewalls/anti virus are disabled
3) have a selection of USB cables on hand to try if one doesn't work.
4) the USB port you are using needs to be a primary port (connected directly to the PC motherboard)......but try them all anyway....
Good luck....
Sent from my GT-I9100 using xda app-developers app
Hello,
I have accidently hard bricked my xperia play.
After i soft bricked it due to flashing a wrong rom i managed to fix it again but then the phone couldnt detect my sdcard.
So i tried to install a new rom again what then failed badly.
I tried to flash it with flashtools but it failed because i forgot to activate debugging so i just plugged my phone out and tried to start it but it somehow didnt work....
Now my computer only does a sound when i plug it in and flashtool nor my computer can detect my phone.
There neither is a led blinkin..
Is there anything i can do?
07boss said:
Hello,
I have accidently hard bricked my xperia play.
After i soft bricked it due to flashing a wrong rom i managed to fix it again but then the phone couldnt detect my sdcard.
So i tried to install a new rom again what then failed badly.
I tried to flash it with flashtools but it failed because i forgot to activate debugging so i just plugged my phone out and tried to start it but it somehow didnt work....
Now my computer only does a sound when i plug it in and flashtool nor my computer can detect my phone.
There neither is a led blinkin..
Is there anything i can do?
Click to expand...
Click to collapse
Can you enter flashmode? (back key while connecting to pc) or fastboot by holding search button while connecting to pc
Sent from my C6603 using xda app-developers app
Jure220 said:
Can you enter flashmode? (back key while connecting to pc) or fastboot by holding search button while connecting to pc
Sent from my C6603 using xda app-developers
app
Click to expand...
Click to collapse
No , cant do neither...
So nuch ****in bad luck today...
Did you flashed wrong rom (from recovery) or wrong firmware (from flashtool) ?
Bakisha said:
Did you flashed wrong rom (from recovery) or wrong firmware (from flashtool) ?
Click to expand...
Click to collapse
well i first flashed the wrong rom and had a soft brick
after that, i fixed it by flashing the stock rom
then, i again tried to flash a firmware with flashtools because my phone couldnt detect the sd-card and cwm somehow didnt work anymore.
while trying to flash the firmware i had to unplug my phone while flashing because i didnt activate debuggin, the flashing had already started tho.
07boss said:
well i first flashed the wrong rom and had a soft brick
after that, i fixed it by flashing the stock rom
then, i again tried to flash a firmware with flashtools because my phone couldnt detect the sd-card and cwm somehow didnt work anymore.
while trying to flash the firmware i had to unplug my phone while flashing because i didnt activate debuggin, the flashing had already started tho.
Click to expand...
Click to collapse
Start flashtool.
Power off phone
press and hold back button.
While still keeping pressed back button, plugin usb to phone
What is report from flashtool?
Bakisha said:
Start flashtool.
Power off phone
press and hold back button.
While still keeping pressed back button, plugin usb to phone
What is report from flashtool?
Click to expand...
Click to collapse
it doesnt say anything, like my phone was never connected...
07boss said:
it doesnt say anything, like my phone was never connected...
Click to expand...
Click to collapse
is it same for fastboot mode ? (power off, hold search and plug in usb)
Try other usb port, or maybe different cable
reinstall drivers from flashtool folders
right-click on "my computer" , click "manage", click "device manager". Is there any item with yelow mark, someting called "adb" or "semcusb"?
What is your model? i,a,at or x? locked or unlocked bootloader?
Wich stock firmware did you tried to flash previously? .79?
hi
07boss said:
Hello,
I have accidently hard bricked my xperia play.
After i soft bricked it due to flashing a wrong rom i managed to fix it again but then the phone couldnt detect my sdcard.
So i tried to install a new rom again what then failed badly.
I tried to flash it with flashtools but it failed because i forgot to activate debugging so i just plugged my phone out and tried to start it but it somehow didnt work....
Now my computer only does a sound when i plug it in and flashtool nor my computer can detect my phone.
There neither is a led blinkin..
Is there anything i can do?
Click to expand...
Click to collapse
check if it is detected in pc with testpoints then i can fix it contact me on gtalk [email protected]
Bakisha said:
is it same for fastboot mode ? (power off, hold search and plug in usb)
Try other usb port, or maybe different cable
reinstall drivers from flashtool folders
right-click on "my computer" , click "manage", click "device manager". Is there any item with yelow mark, someting called "adb" or "semcusb"?
What is your model? i,a,at or x? locked or unlocked bootloader?
Wich stock firmware did you tried to flash previously? .79?
Click to expand...
Click to collapse
Tried all the ports and cables i got nothing worked.
Reinstalled Flashtool but didnt work neither.
No adc or semcusb found
I have a r800i with locked bootloader
And i flashed R800i_4.0.A.2.368_World this firmware previously.
kks111 said:
check if it is detected in pc with testpoints then i can fix it contact me on gtalk [email protected]
Click to expand...
Click to collapse
hi,
im not sure if i did it right but it still didnt work
I did it like shown here http://i2.minus.com/i9RmZrmhz0sq4.jpg so I connected the pointed end to the TP and the other end of the cable with the micro-usb.
Oh shoot,
i just realized that i didnt erase the old cache and date when i tried to install the new rom after i installed the stock rom because i couldnt enter cwm.
So is there anything I can do?
07boss said:
So is there anything I can do?
Click to expand...
Click to collapse
Try PC Companion.
Or try to enter in flash mode from different computer
Basicly, all you need is to enter flash mode and flash stock ftf with flashtool.
Why you can't enter flash mode, i am unable to understand...
Bakisha said:
Try PC Companion.
Or try to enter in flash mode from different computer
Basicly, all you need is to enter flash mode and flash stock ftf with flashtool.
Why you can't enter flash mode, i am unable to understand...
Click to expand...
Click to collapse
Well i already tried Pc COmpanion like a houndred times even while i had TP connected...
I cant understand the problem with the flash mode neither...
Its like my phone is "dead" it just doesnt respond to anything...
07boss said:
Well i already tried Pc COmpanion like a houndred times even while i had TP connected...
I cant understand the problem with the flash mode neither...
Its like my phone is "dead" it just doesnt respond to anything...
Click to expand...
Click to collapse
when you plug in phone, do you hear any sounds from windows? (that sound when you plug/unplug any usb device.)
Bakisha said:
when you plug in phone, do you hear any sounds from windows? (that sound when you plug/unplug any usb device.)
Click to expand...
Click to collapse
yea i hear a sound but nothing else.
07boss said:
yea i hear a sound but nothing else.
Click to expand...
Click to collapse
reinstall drivers from flashtool folder (most probably it's in c:\Program Files (x86)\Flashtool\drivers\ )
Connect your Play in flash mode (power off, hold back and plug in usb)
Look in device manager for anything with name sony, sony erricson, semc, adb, r800... Expand all items if you have too. Screenshot would help also
Check in other mods too (normal and fastboot mode)
Bakisha said:
reinstall drivers from flashtool folder (most probably it's in c:\Program Files (x86)\Flashtool\drivers\ )
Connect your Play in flash mode (power off, hold back and plug in usb)
Look in device manager for anything with name sony, sony erricson, semc, adb, r800... Expand all items if you have too. Screenshot would help also
Check in other mods too (normal and fastboot mode)
Click to expand...
Click to collapse
Hi,
btw thanks for all your help :good:
I actually find something in the device manager its called "ZEUS flash device".
Nice now when I press the search button it installs the ZEUS drivers.
Ill screenshot it.
Flashtool still cant find anything.
http://www.directupload.net/file/d/3515/9rzqw5vb_png.htm Device manager
http://www.directupload.net/file/d/3515/4h8vbs3z_png.htm ZEUS flash device
Its all german but I thing its not too hard to understand.
Hi there,
I've done this numerous times and various machines.
Unfortunately my devices on/off button is broken and when the battery is low and the phone shuts down I need a PC to reboot the device by using "fastboot reboot."
Works on 4 different machines, except for my homebase PC. *Sigh* :crying:
In a command window fastboot responds with "waiting for device"..... Opening the Flashtool, it recognizes the device and tells me that it is in the fastboot mode. To my surprise there is no button in Flashtool that says reboot or a chance to issue commands to the phone...... so frustrating.
Any idea of how I can get this to work? Here is what I will not do: Re-Install Windows.
Here is what I tried: Re-Installing the driver numerous times, Flashtool recognizes the device.
How can that be? Makes no sense to me at all....
Any input is appreciated.
Thanks
James
Andro1dism said:
Hi there,
I've done this numerous times and various machines.
Unfortunately my devices on/off button is broken and when the battery is low and the phone shuts down I need a PC to reboot the device by using "fastboot reboot."
Works on 4 different machines, except for my homebase PC. *Sigh* :crying:
In a command window fastboot responds with "waiting for device"..... Opening the Flashtool, it recognizes the device and tells me that it is in the fastboot mode. To my surprise there is no button in Flashtool that says reboot or a chance to issue commands to the phone...... so frustrating.
Any idea of how I can get this to work? Here is what I will not do: Re-Install Windows.
Here is what I tried: Re-Installing the driver numerous times, Flashtool recognizes the device.
How can that be? Makes no sense to me at all....
Any input is appreciated.
Thanks
James
Click to expand...
Click to collapse
Which driver install method do you use? I think Flash tool driver exe is best, and make sure to install fastboot, flash mode, and device specific, (Z1c is 'Rhine'). It's strange that Flash tool would recognize device in fastboot mode, but fastboot wouldn't...
Anyway, an alternative would be to mod system ui to include power button on navbar. Not hard to do. Let me know if you want to try.
Here's an example - https://forum.xda-developers.com/showpost.php?p=71219730&postcount=2212
I changed my on-off button. It's easier
levone1 said:
Which driver install method do you use? I think Flash tool driver exe is best, and make sure to install fastboot, flash mode, and device specific, (Z1c is 'Rhine'). It's strange that Flash tool would recognize device in fastboot mode, but fastboot wouldn't...
Anyway, an alternative would be to mod system ui to include power button on navbar. Not hard to do. Let me know if you want to try.
Here's an example - https://forum.xda-developers.com/showpost.php?p=71219730&postcount=2212
Click to expand...
Click to collapse
Hi Levone,
yeah, I did exacly that. Use Flashtool and then install fastboot, flash mode and the Z1C Drivers..... funny it workes smooth under Windows 7 but not at all under Windows 10 (different partition). I had the hope it goes smooth in Win10 which would suffice for me..... although I'd like to have it running in my home OS Win7x64.
Ur UI looks nice, although I dunno what help it would provide me if the phone is down
alf-endy said:
I changed my on-off button. It's easier
Click to expand...
Click to collapse
Yeah sure that would be no problem from the technical side, but I prefer the phone to be water proof :yay: #SonyForTheWin ^^
Andro1dism said:
Ur UI looks nice, although I dunno what help it would provide me if the phone is down
Click to expand...
Click to collapse
Right - I just thought that if you at least gave yourself a reboot option while phone was up, you could avoid some of the power-downs. I guess you could do thebsame with an app...
Also, might be possible to re-map and make a different button power.
levone1 said:
Right - I just thought that if you at least gave yourself a reboot option while phone was up, you could avoid some of the power-downs. I guess you could do thebsame with an app...
Also, might be possible to re-map and make a different button power.
Click to expand...
Click to collapse
Andro1dism said:
Ur UI looks nice, although I dunno what help it would provide me if the phone is down
#SonyForTheWin ^^
Click to expand...
Click to collapse
O looked into it for my own curiosity, and I wastable to remap my volume key to work for power, by modding /system/usr/key layout, but doesn't work from powered off. Doesn't seem possible...
levone1 said:
O looked into it for my own curiosity, and I wastable to remap my volume key to work for power, by modding /system/usr/key layout, but doesn't work from powered off. Doesn't seem possible...
Click to expand...
Click to collapse
Is there a way to re-calibrate the battery so that it at least shows 20% of power and not 50% ?
Besides: How can I "avoid some of the power-downs" with a reboot?!
But. . . . . . . There are buttons in Flashtool to do what you want
Andro1dism said:
Hi there,
I've done this numerous times and various machines.
Unfortunately my devices on/off button is broken and when the battery is low and the phone shuts down I need a PC to reboot the device by using "fastboot reboot."
Works on 4 different machines, except for my homebase PC. *Sigh* :crying:
In a command window fastboot responds with "waiting for device"..... Opening the Flashtool, it recognizes the device and tells me that it is in the fastboot mode. To my surprise there is no button in Flashtool that says reboot or a chance to issue commands to the phone...... so frustrating.
What about the Fastboot Toolbox in Flashtool ?
Just in case you didn't notice 9 buttons you can push with a mouse to make your xperia do just about anything fastboot can do without ever having to touch a keyboard or a button.
Picture with Sony D5503 Lineage CM12 min res 2mp
Click to expand...
Click to collapse