Develop Bugs

Phone Won't Start After DPI Change. PLEASE HELP!!!

After lowering my DPI, now my phone won't boot up past the first screen. I have been told that a "dirty flash" will help but I have no idea what any of those terms mean so please give me very specific instructions on what to do

tried flashing ROMs? You modified build.prop right? If so, flash a zip that puts a new build.prop inside the system.

How do I flash the rom? Sorry I'm really new to this stuff

Ok so now can somebody please introduce me to a ROM that will actually work and give me a new build.prop because I've tried alot of roms and none of them work :'(
I REALLY need this phone working ASAP and I hear I need to get a new build.prop

TheBlastPassage said:
Ok so now can somebody please introduce me to a ROM that will actually work and give me a new build.prop because I've tried alot of roms and none of them work :'(
I REALLY need this phone working ASAP and I hear I need to get a new build.prop
Click to expand...
Click to collapse
It's simple, load a Rom in your sd card, using TWRP do a system format(deletes your whole ROM) and flash the ROM form sd card.
Oh and since you are new to that stuff, here is a recommended rom ->http://forum.xda-developers.com/showthread.php?t=1955679 this dude over there explains the whole process well, if you still feel you need help and advice, drop me a pm or something

I'll try that out. I REALLY hope this works...
I'll give thanks if it does

Didn't work
I did all that (but I have no idea what TWRP is so I didn't do that)
and it just said that the installation was aborted (status 7)
I did however notice that it said "confirming that your device is GT-I8160" and that seems to be where the problem started
My phone is: GT-S7560M
Please help

TheBlastPassage said:
Didn't work
I did all that (but I have no idea what TWRP is so I didn't do that)
and it just said that the installation was aborted (status 7)
I did however notice that it said "confirming that your device is GT-I8160" and that seems to be where the problem started
My phone is: GT-S7560M
Please help
Click to expand...
Click to collapse
omg...why didn't you mention that earlier...the roms here in this section are for i8160 aka Samsung Galaxy Ace II, your model is Galaxy Ace II x
in that case....I really have no idea..I can't find the stock firmware for this phone anywhere...

Sorry
But I can't find a section on the Ace II X
But anyway is there ANYTHING at all I can do to at least get this fixed???

TheBlastPassage said:
Sorry
But I can't find a section on the Ace II X
But anyway is there ANYTHING at all I can do to at least get this fixed???
Click to expand...
Click to collapse
Refer to this thread http://forum.xda-developers.com/showthread.php?t=2019146 , there should be someome who can help you there. You're in a pretty bad situation right now mate, if only we had the stock firmwares for the phone it would be child's play but ye...I hope you will find a solution in that thread.

I'll try there.
This sucks -_-

hey guys i hav a samsung tab 3 lite and i changed my dpi using an app now ,, the touchwiz ui has stopped working and the phone isnt even starting i did hard reset but it is of no use,, please suggest me what to do....

Sorry

HurtSky' Kernel V3.3 problem .. plz help

hi ... i just downloaded the HurtSky' Kernel V3.3 on my galaxy wonder and did what exactly was said in this topic : http://forum.xda-developers.com/show....php?t=2204669
but my phone now refuse to work at all , after the samsung screen with cyanogenmod logo the device don`t show anything and keeps restarting ... i registered in the site to post about my problem in the topic above ... but because i`m new so i can not post ... please help me i don`t know what to do

shalawla5 said:
hi ... i just downloaded the HurtSky' Kernel V3.3 on my galaxy wonder and did what exactly was said in this topic : http://forum.xda-developers.com/show....php?t=2204669
but my phone now refuse to work at all , after the samsung screen with cyanogenmod logo the device don`t show anything and keeps restarting ... i registered in the site to post about my problem in the topic above ... but because i`m new so i can not post ... please help me i don`t know what to do
Click to expand...
Click to collapse
first, welcome to community.
you probably flashing the wrong version.
ics for ics, jb for jb. Can't be use for different android version

coliv_aja said:
first, welcome to community.
you probably flashing the wrong version.
ics for ics, jb for jb. Can't be use for different android version
Click to expand...
Click to collapse
thnx ..
u should know that i don`t know what i was doing ... i just was angry about my device because it works slowly .. so i googled how to improve performance of my device and i used something called adrenaline boost then i saw that topic at this site and i just did what was written
i really don`t understand anything about smartphones softwares ... but i saw the steps and i thought it was easy , but somebody told me that i should have cm9 befor what i did !!!
so plz till me what to do step by step if u can

shalawla5 said:
thnx ..
u should know that i don`t know what i was doing ... i just was angry about my device because it works slowly .. so i googled how to improve performance of my device and i used something called adrenaline boost then i saw that topic at this site and i just did what was written
i really don`t understand anything about smartphones softwares ... but i saw the steps and i thought it was easy , but somebody told me that i should have cm9 befor what i did !!!
so plz till me what to do step by step if u can
Click to expand...
Click to collapse
You can head to cm9 thread on development section, step by step is usually described on OP, and there is cm9 discussion thread http://forum.xda-developers.com/showthread.php?t=1598056
many people there will be happy to help you.
and i suggest you should read general guide here http://forum.xda-developers.com/showthread.php?t=1941028
and some sticky thread on development section. everything already described there.

coliv_aja said:
You can head to cm9 thread on development section, step by step is usually described on OP, and there is cm9 discussion thread http://forum.xda-developers.com/showthread.php?t=1598056
many people there will be happy to help you.
and i suggest you should read general guide here http://forum.xda-developers.com/showthread.php?t=1941028
and some sticky thread on development section. everything already described there.
Click to expand...
Click to collapse
thnx for ur help ... i used this topic : http://forum.xda-developers.com/showthread.php?t=1576874 and download the CM9 rc9 .. and my phone worked again .. althought every thing was erased but at least it worked ... thnx for ur help that was very kind from u

shalawla5 said:
thnx for ur help ... i used this topic : http://forum.xda-developers.com/showthread.php?t=1576874 and download the CM9 rc9 .. and my phone worked again .. althought every thing was erased but at least it worked ... thnx for ur help that was very kind from u
Click to expand...
Click to collapse
glad to hear that's worked for you. CM9 is the most stable for our device. you can try cm10 or cm10.1 if you want to test newer version. it's also run well, but the main problem is our ram. it's to small to handle. so if you want to get performance, stability and battery friendly i suggest you keep CM9.
you should backup first, lol :laugh: nandroid backup for your rom, in case you have to back to stock rom to claim the guarantee. but yeah, you can flash stock rom anyways. there is on sammobile.com
i usually using gobackup to backup sms, contacts, call log, etc. and my contacts always sync to my google account. (i know most people think go app is crap, yeah it is, but this one is working well for simple backup ).
i suggest after installing new rom you install app manually from play store. because different android version usually had different apk build.

Help with new ROM LewaXperia

Hi,
Greetings to all,I have been trying to get my hands dirty (learn a thing or two on ROM development) for a very very long time but never had the courage to take the plunge !
Finally I have decided to do it albeit a safer way,I have tried to port latest LEWAOS to Arc using the porting tool by Abinav2. I also tried others but kept getting one or the other errors.
Have taken the CM10 Nightly and the latest Lewa OS5 for the job and the result was successful to a large extent, The ROM installs fine but won't go past initial boot logo,There is no Boot Loop ! Its simply stuck at starting logo.
Have tried multiple kernels and tried to redo the ROM many times but no joy,One more interesting thing I noticed is in Lewa there is no init.d in etc folder,so how does one deal with it ??
So I finally decided to post it here to ask for some guidance and to check whether someone can actually boot into it.
Here's the ROM LewaXperia
PS: This is my first post on development front so please be gentle and Mods if this is not okay than please do let me know before you take any actions or suggest the right thing to do.
Regards.

Hi,
Guys can anyone please reply ? Did anyone of you try it ?? Results ??
Regards.

Try to change bootclasspath check my signature
Sent from my WT19i using XDA Free mobile app

Hi,
Try to change bootclasspath check my signature
Click to expand...
Click to collapse
Thanks a lot for the help !! I really Am trying to make it work,But its just not happening.
I tried to change bootclasspath as suggested by you but there is no init.rc in both the ROM's !! So what Am I supposed to do now ? In the extracted folder there is sbin (folder),logo.rle and init,Thats all there are no other file or folder like your video shows.
Regards.

Not rom u have to extract kernels
Sent from my WT19i using XDA Free mobile app

Hi,
Not rom u have to extract kernels
Click to expand...
Click to collapse
Yes sorry that's exactly what I meant, Meaning the kernel's inside both the ROM's ! The kernels of both the ROM's doesn't have the anything else but the above mentioned.
Regards.

handsome1_blr said:
Hi,
Guys can anyone please reply ? Did anyone of you try it ?? Results ??
Regards.
Click to expand...
Click to collapse
First off you posted in the wrong section. All questions, help and troubleshooting issues should be posted in the Q&A, Help and Troubleshooting sections. You posted in the sacred section of development where only developers should me making threads. Also you need to wait 24 hours before bumping your thread if unanswered.
Thread moved
FNSM

How remove android 4.4.4 from htc one m8???

Please, I need to remove this terrible update from my cellphone!!
I did the update yesterday and I hate it!
The baterry life is 1/3 then before!!! All app's are crashing, even gallery!!
What the hell they did???
Please, help me!! How remove it????

Sir,
Please wait until mods will move this thread to the device specific forum.
For more replies or questions you must register an account on XDA forums.
Stand by
Good luck

Change rom
XDA Visitor said:
Please, I need to remove this terrible update from my cellphone!!
I did the update yesterday and I hate it!
The baterry life is 1/3 then before!!! All app's are crashing, even gallery!!
What the hell they did???
Please, help me!! How remove it????
Click to expand...
Click to collapse
Flash a custom rom or an older version of the stock rom
http://forum.xda-developers.com/showthread.php?t=2694917
http://forum.xda-developers.com/showthread.php?t=2706441
or search for some other....

PLEASE MiuiPro 9|8.3.15 for Lenovo P2

I installed the MIUI 9 ROM
The phone is constantly rebooting
Please Friends help me!!

berkay0733 said:
I installed the MIUI 9 ROM
The phone is constantly rebooting
Please Friends help me!!
Click to expand...
Click to collapse
Always read op and particular thread posts before doing anything and check the below link dev already posted to fix the random reboots.
https://forum.xda-developers.com/lenovo-p2/development/port-miuipro-98-3-15-lenovo-p2-t3773476/post76137791