Develop Bugs

How to use SDK to root the phone?

Hi all,
I have just switched from the HD2 to the MT3G Slide and want to root the phone.
I knew how to do all the stuff on the HD2 from reading but cannot find any information here. The sticky placed on the top isn't much help because I know you need to use the Android SDK tool but I do not know how to set that up. & when I try to use the command line I cannot type in it. Please can someone give me some help on how to do this so I can get started on rooting my phone.
Thanks for reading!

you claim you read the sticky but yet if you had you would have seen the link on the first page i believe that tells you to get sdk from [link] and then on that page there is a link that says setting up SDK on your [OS] computer. then just follow the steps in there(which is really more like download file and double click setup) after that you can open up a terminal/console/cmd and type in cd \path to sdk\tools
if you are on mac or linux(unlikely since you can't read or search) you would type in
cd /path/to/sdk/tools notice how the slash between directories(folders) is the other way around
then follow the directions in the root thread(incredibly difficult i know but you should still try to do this part on your own)

tubaking182 said:
you claim you read the sticky but yet if you had you would have seen the link on the first page i believe that tells you to get sdk from [link] and then on that page there is a link that says setting up SDK on your [OS] computer. then just follow the steps in there(which is really more like download file and double click setup) after that you can open up a terminal/console/cmd and type in cd \path to sdk\tools
if you are on mac or linux(unlikely since you can't read or search) you would type in
cd /path/to/sdk/tools notice how the slash between directories(folders) is the other way around
then follow the directions in the root thread(incredibly difficult i know but you should still try to do this part on your own)
Click to expand...
Click to collapse
Okay I have downloaded all of the Android SDK already. I have read it but my issue is when I try to type in the command it will not let me type. I also read that Anroid SDK is for xp & vista only and that windows 7 was not listed, so it this my issue? The command line you speak of is the one with the SDK tools and not the acutal windows CMD line?
I have followed everything to the line but still cannot seem to get this to work.
and to be clear I did read and there is nothing on there that states you need to have SDK to root the MT3GS. It says to download the slide_root

what operating system are you doing this on? that would be more helpful so i could tell you how to set this up correctly

tubaking182 said:
what operating system are you doing this on? that would be more helpful so i could tell you how to set this up correctly
Click to expand...
Click to collapse
windows 7. I have android SDK and I have downloaded the 2.1 Android pack.

if you are using windows 7 x64(very likely) then you cannot use that computer and you should try using ubuntu(same as using mac for 99% of the steps and there is a thread in q and a talking about this right now) or setting up a virtual machine and installing xp and using that to hack your phone. virtual machines are easy to setup and use if you can use virtualbox

tubaking182 said:
if you are using windows 7 x64(very likely) then you cannot use that computer and you should try using ubuntu(same as using mac for 99% of the steps and there is a thread in q and a talking about this right now) or setting up a virtual machine and installing xp and using that to hack your phone. virtual machines are easy to setup and use if you can use virtualbox
Click to expand...
Click to collapse
download virtual box right now. will that come with xp installed on it or would I need to download that onto it?
thanks for all of your help.

you will need to get an xp install cd or iso to install xp on it. if you have any friends with xp install disks or you can find one online and use it as a trial(no key=no activation=30 day trial) then you can use it for a day and root with that.
disclaimer: i suggest totally legal versions of windows xp, any install disk you download or get illegally is your fault when the FBI/Bill Gates comes to the door

tubaking182 said:
you will need to get an xp install cd or iso to install xp on it. if you have any friends with xp install disks or you can find one online and use it as a trial(no key=no activation=30 day trial) then you can use it for a day and root with that.
disclaimer: i suggest totally legal versions of windows xp, any install disk you download or get illegally is your fault when the FBI/Bill Gates comes to the door
Click to expand...
Click to collapse
Instead of suggesting that he commits a felony why don't you tell him to use Ubuntu in the virtual machine? It'll take a little longer but it's less likely he'll be fined.

i didn't say commit a felony, and if you are going to use ubuntu then you don't need a virtual box(dumbass) you can use a live cd. i have been told by microsoft on MANY occasions that if you have a friend with XP install disks then you may use those, as well as the fact that installing it for one day in a virtual box is not illegal if you are not using a cracked key/re-used key, you can choose not to use a key and it is a temporary install for yourself to use either until you get a key, or the 30 days is up. much like you can buy vista/7 and install a different version if you like, but you will have to uninstall it and reinstall using the version i bought a key for once the trial has expired. read up and do your homework before you jump down someone's throat, it makes you look like an ass when i have to come back in here and teach you what a computer is

I set up and rooted two phones with windows 7.. I installed the sdk and pdanet drivers and thats it..

using 64-bit? last i knew there was no 64-bit adb driver so i didn't even try with my win7 x64 machine, i used my vista x32 box to root my phone.

http://forum.xda-developers.com/showthread.php?t=532719 this exact guide and links

tubaking182 said:
using 64-bit? last i knew there was no 64-bit adb driver so i didn't even try with my win7 x64 machine, i used my vista x32 box to root my phone.
Click to expand...
Click to collapse
I'm using Windows 7 x64 Bit Ultimate Edition..
The Guide was written from using Windows Machine Yes, it works just fine

eugene373 said:
I'm using Windows 7 x64 Bit Ultimate Edition..
The Guide was written from using Windows Machine Yes, it works just fine
Click to expand...
Click to collapse
Is there anyway that you could give me a little help on getting this to work. When ever I try to type in the command line when i pull up the SDK it doesn't do anything. and when I try to pull up abd it just pops up a CMD for a quick two seconds.

look at link I posted

turboyo said:
look at link I posted
Click to expand...
Click to collapse
thanks. didn't see it. saw the last post was posted by eugene and scrolled down as fast as i could lol.
So the Command line is the CMD program through windows? I don't understand why someone wouldn't set me straight on that since I was saying the command line in SDK wasn't letting me type anything

Installing Drivers
Plug in your phone through USB and DO NOT MOUNT IT!!!!!
Your computer should see a new device and try to install Android 1.0 driver (If it doesnt, scroll down to the "Im not getting a notification of Android ADB when i plug in my USB" section)
Let it load
Once it cant find them select "Install drivers from my pc"
The drivers you need are in the Android SDK 1.5r2 folder (C:\android-sdk-windows\usb_driver)
Depending on your OS pick x86 or amd64
You ADB Android Device should now be installed! Good Job
When I do this part it doesn't find the ABD driver but it does not have anywhere to install drivers from my pc at all on my windows 7
edit: found where to go to add the usb drivers but when I select the folder all I get is "windows cannot find driver software on your pc"
edit 2: Found out what driver I needed, thanks for the guide source going to try to root this thing finally

tubaking182 said:
using 64-bit? last i knew there was no 64-bit adb driver so i didn't even try with my win7 x64 machine, i used my vista x32 box to root my phone.
Click to expand...
Click to collapse
Lol seems to me another dumb ass MAC user with nothing more to than make fun of people for not buying a. Crappy MAC. Unless you edit video for a movie company. Don't buy mac. Steve Jobs is a jobber. Plus macs. Suck. Win 7 rocks. Hate vista. Stfu mactard....
Sent from my T-Mobile myTouch 3G Slide using XDA App

Ps not everyone should have a rooted phone. If after about a million tries. Just quit. There are plenty of how toos in the forums. They work read slowly and then read slowly again.
Sent from my T-Mobile myTouch 3G Slide using XDA App

[PROGRAM] Heimdall - Open-Source Cross-Platform Flashing Suite (1.4.0 Now Available)

What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
How does it work?
Heimdall uses the same protocol as Odin to interact with a device in download mode. USB communication in Heimdall is handled by the popular open-source USB library, libusb-1.0.
Why “Heimdall”?
The flashing software Odin is named after the king of gods in Norse mythology. Loke, the software component on the Galaxy S that provides functionality to flash, may also to be named after an important character in Norse mythology, often translated as Loki. As such I have named my flashing software Heimdall, after the Norse god, and guardian of the Bifrost Bridge.
What platforms does Heimdall run on?
Linux, OS X and Windows (XP, Vista, 7 etc.)
Why use Heimdall when we can use Odin?
Odin is generally unreliable and only runs on Windows systems. Furthermore, Odin is leaked Samsung software that is not freely available or well understood by the community.
Is Heimdall safe?
No matter what method you chose, flashing firmware onto your phone has a lot of potential for disaster. We have tested Heimdall with a variety of phones flashing several different firmware versions resulting in a 100% success rate. As such we believe that Heimdall is generally reliable. However keep in mind, just like any flashing software, Heimdall has the potential to brick your phone if not used correctly.
How do Galaxy S phones get bricked when flashing?
Besides the inherent risks like power outs, accidental removal of the USB cable etc. The Galaxy S appears to be running extremely unreliable USB control software.
A failure to flash does not automatically equate to a bricked phone. However if you're extremely unlucky and the flash fails whilst transferring the primary boot-loader, secondary boot-loader or params.lfs (all quite small) than you've got yourself a paper weight that you're hoping Samsung will replace.
Please be extremely careful mixing files from different firmware releases. Don't do so unless you're certain it will work!
What Galaxy S variants has Heimdall been tested with?
We’ve tested Heimdall with a Galaxy S GT-I9000 (8 GB) from the United Kingdom and Galaxy S GT-I9000 (16 GB) from Australia. We don’t personally have access to any other devices to test with, however users have confirmed Heimdall functions correctly with the AT&T Captivate, Bell Vibrant, Telstra GT-I9000T, Epic 4G and the Galaxy Tab.
Enough talk, where can we get it?
The latest release is available here. Please read the instructions and README files included in the archives.
I love you, man. Will you have my baby?
No, but I will very gladly accept donations. If you appreciate my work and would like to support future development you can make a donation here. If you think you have something else to offer, then feel free to shoot me a PM or contact me via the contact form on the Glass Echidna website.

Sounds interesting.. Certainly something to watch in the future..

for linux? YES! i love u

Kudos for you! wow it looks impressive
A question though....
the instructions seems to be very... Windows oriented.
What about Linux or MAC OS?
Do we need to run it with WINE, or just run it as a DOS executable?
same question for MAC OS, you know people in MAC are so used to plug and play, If i were a MAC user i'll just plug my phone in, and expect to run Heimdall by click on it and have it come up.
However at the moment it seems to require Windows emulation for it to run.

Thanks guys.
Also, I forgot to add in the README that you also need the same PIT file as the one that is installed on your device, probably version 512.
I can see by my website's bandwidth usage that people have been downloading the alpha. Has anyone tested it yet?

AllGamer said:
the instructions seems to be very... Windows oriented.
What about Linux or MAC OS?
Do we need to run it with WINE, or just run it as a DOS executable?
same question for MAC OS, you know people in MAC are so used to plug and play, If i were a MAC user i'll just plug my phone in, and expect to run Heimdall by click on it and have it come up.
However at the moment it seems to require Windows emulation for it to run.
Click to expand...
Click to collapse
The alpha release is just the Windows binaries. Whilst the source code certainly compiles for OS X and Linux I want to make sure that everything is running fine on Windows first, with Odin nearby if need be.

Benjamin Dobell said:
The alpha release is just the Windows binaries. Whilst the source code certainly compiles for OS X and Linux I want to make sure that everything is running fine on Windows first, with Odin nearby if need be.
Click to expand...
Click to collapse
ahh, Good to know, i was worried there for a second
I can't test it yet, my phone hasn't come back from repair.
i'll help test as soon as my phone is back.

go public linux binary too, else ppl will use odin instead your and you wont receive much feeback as much as if you release linux binaries.

husq510 said:
go public linux binary too, else ppl will use odin instead your and you wont receive much feeback as much as if you release linux binaries.
Click to expand...
Click to collapse
I know it's a pain that Linux users have to wait (as usual). As much as I do want feedback, I don't want feedback from Linux users saying that the flash failed for some reason and that they don't have access to Windows/Odin.
I'm not actually sure if I'll ever release Linux binaries as binary compatibility across multiple Linux distributions is problematic. Of course once I've confirmed everything is working on other peoples' devices, what phone models are supported etc. then I will release the source code with instructions to compile for all supported platforms.
EDIT: Has Heimdall really been downloaded ~45 and no-one has bothered to install and run it?

I'm having trouble with the following step:
4. Under Universal Serial Bus Controllers right click on the Samsung composite driver and chose Properties.
I don't have such device in device manager.
Windows 7 x86

very cool stuff, thank you a lot!!!
first of all. i am a linux only user and had to run odin on a virtual box which is a pain in the ass but i fully understand your argument to first only release a windoze version to get it out of alpha state.
now, while i know that it's also possible to brick the device with odin and i have flashed several times now. i am a little afraid to try heimdall (to be honest). did you implement the additional security measures (delay+resend) after you bricked your device or before? you wrote that heimdall supports only full firmware flashes atm. it would be cool if we could also use it to just flash a kernel. any plans to implement this?
thanks!

mike.sw said:
I'm having trouble with the following step:
4. Under Universal Serial Bus Controllers right click on the Samsung composite driver and chose Properties.
I don't have such device in device manager.
Windows 7 x86
Click to expand...
Click to collapse
Is your device plugged in to your PC and in download mode?
I suppose you would also have needed to install Kies at some stage. However, Odin makes use of this driver so if Odin works it should be there.

Oh god, I'm an idiot.
Connected phone to wall charger, and was sure it's my USB cable.... *facepalm*

jodue said:
very cool stuff, thank you a lot!!!
first of all. i am a linux only user and had to run odin on a virtual box which is a pain in the ass but i fully understand your argument to first only release a windoze version to get it out of alpha state.
now, while i know that it's also possible to brick the device with odin and i have flashed several times now. i am a little afraid to try heimdall (to be honest). did you implement the additional security measures (delay+resend) after you bricked your device or before? you wrote that heimdall supports only full firmware flashes atm. it would be cool if we could also use it to just flash a kernel. any plans to implement this?
thanks!
Click to expand...
Click to collapse
I implemented the delay and resend after my phone was bricked.
I think I was ludicrously unlucky in how my phone got bricked. Given that the primary boot loader is only 256 KiBs whilst the factory filesystem is over 250 MiB (plus other files). The chance of failing whilst the primary or secondary boot loader is being sent is quite slim.
When I was debugging Heimdall I would often intentionally stop at other points during the flash. After resetting it would just result in the connect phone to PC image being displayed (instead of booting). Then I could just restore with Odin (after several attempts) and then further restore using ClockworkMod backups.
However, by no means do I want to pressure anyone into running the software, especially whilst it's only an alpha release.
EDIT: I just realised I didn't answer your question about just kernel flashing. Yes, I definitely intend to implement functionality to only flash singular components at a time. I'd also like to implement functionality to dump files if possible. However I won't know if I can do that until I get my phone repaired or get my hands on another Galaxy S device.

Hey again
I'm looking the flash.bat and see it need two files that my firmware (I9000JPJG8) don't have in zip/tar file:
-boot boot.bin -sbl Sbl.bin
How heimdall will handle it? Is it safe to go on?

mike.sw said:
Hey again
I'm looking the flash.bat and see it need two files that my firmware (I9000JPJG8) don't have in zip/tar file:
-boot boot.bin -sbl Sbl.bin
How heimdall will handle it? Is it safe to go on?
Click to expand...
Click to collapse
Heimdall won't let you continue as the first thing it does (before connecting to your phone) is check that the specified files exist. Those two files are the primary boot loader and the secondary boot loader. I'm a bit surprised they're missing from your firmware. They're usually in the Code tar archive.
You'll have to grab them from somewhere. If you don't want to download more firmware then you can retrieve them from your device. Err, I'll update this post in a minute or two with instructions.

This is one little tricky FW.
The last one I tried was I9000XWJM5 and it had 3 tar files as supposed.
This one just have one tar file, and people who installed it with Odin said to use only the PDA section with the single tar file.
I'm not sure, but it seem to work for them.
BTW in your README I think you should remind for the folks to put the pit file in the dir as well
Also here in WIN7 it didn't let me change the driver as simply as stated in README.
What I had to do is to use the Have Disk option, and point it to the dir. Otherwise it says that Windows already have the correct driver installed.

mike.sw said:
This is one little tricky FW.
The last one I tried was I9000XWJM5 and it had 3 tar files as supposed.
This one just have one tar file, and people who installed it with Odin said to use only the PDA section with the single tar file.
Click to expand...
Click to collapse
If you still have I9000XWJM5 laying around you could give that a go, it is the firmware I use.
If not you can get the boot loaders by copying them first to your sdcard using:
Code:
sudo dd if=/dev/block/bml1 of=/sdcard/boot.bin
sudo dd if=/dev/block/bml4 of=/sdcard/Sbl.bin
Clearly your phone needs to be rooted to use sudo.
EDIT: I need to go to bed now (it's actually well and truly morning here). I'll be on in 5-6 hours if you require any more help. Thanks for going to all this effort so far!

Yea, I'll grab JM5 again just in case the **** hits the fan

Benjamin Dobell said:
I implemented the delay and resend after my phone was bricked.
I think I was ludicrously unlucky in how my phone got bricked. Given that the primary boot loader is only 256 KiBs whilst the factory filesystem is over 250 MiB (plus other files). The chance of failing whilst the primary or secondary boot loader is being sent is quite slim.
When I was debugging Heimdall I would often intentionally stop at other points during the flash. After resetting it would just result in the connect phone to PC image being displayed (instead of booting). Then I could just restore with Odin (after several attempts) and then further restore using ClockworkMod backups.
However, by no means do I want to pressure anyone into running the software, especially whilst it's only an alpha release.
EDIT: I just realised I didn't answer your question about just kernel flashing. Yes, I definitely intend to implement functionality to only flash singular components at a time. I'd also like to implement functionality to dump files if possible. However I won't know if I can do that until I get my phone repaired or get my hands on another Galaxy S device.
Click to expand...
Click to collapse
thank you for the additional information on the process. i think i will give it a shot next time i want to flash a new firmware. donation is on the way!

[Q] Transferring ROM files Linux to Phone

I have three computers.
1) Server my company outgrew and am using at home as my desktop now.
OpenSuse 11.4 64-Bit KDE 4.6
2) Notebook - Dell M1330
Ubuntu 11.04 Beta (updated every day)
3) Notebook - Dell M1330 (not dual boot...a separate one)
Windows 7 64-Bit Professional
With either 1 or 2, when I download a ROM and connect my EVO to the computer, transfer the ROM and try to flash, I ALWAYS get a bad file or other error, and it will not flash.
With 3-Windows 7, any single ROM file I download and copy to my EVO it ALWAYS works...no errors, everything is fine.
I'm not an expert in Linux, but also know my way around enough to fix whatever problem for the most part.
What the hell can it be that with different Linux installs on different computers, EVERY time I copy and paste a file to my phone, the file never works...most of the time it is even a different sized file (i.e. original is 204 MB's, and when I transfer it to the phone it will be ~4MB's.
I have also tried running the file manager as root to see if it made a difference, but to no avail...and this with KDE, Gnome 2.3 and Unity.
Any insight into this will be greatly appreciated...the only reason I have Windows 7 running is specifically for this reason...I've finally gotten to the point where I have no need for Windows 7 whatsoever and this pisses me off.
sorry if it has been mentioned, I've googled and search everywhere and not found anyone mentioning this.
Thanks

[Guide] Dualboot (Acer Iconia W700) Windows 8 - Android

I am not responsible for any damage happening to your device by doing this!
I believe Windows 8 is great for productivity, but that's not Always what we are looking for. We want to experiment with our devices and get as much out of them as possible. Android gives us the freedom to do with this tablet what we never thought possible, the overall performance is incredible and graphics are buttery smooth. However, I couldn't find a suitable guide, so I created one myself. So let's get started!
Bug list:
Everything should be working fine, contact me if not
Requirements:
USB Stick with at least 512 MB storage
USB Keyboard
USB-hub, because the tablet only has 1 USB port
Latest image available for Generic UEFI Installer from here
Image Writer Tool from here
Setting up a bootable USB
1. Download Image Writer Tool, unpack it and run the ''Win32DiskImager.exe" file
2. Once opened, navigate to your *.img file you downloaded earlier in the requirements and hit "Write" (This will format the USB drive)
3. Let it run and once it's done your USB is good to go.​Setting up tablet to boot from USB
1. Enter BIOS settings by pressing the power (and hold it) and the Windows button
2. Once there, make sure UEFI boot modus is set​
Booting from USB
1. Make sure your tablet is turned off
2. Plugin your USB-hub with USB Stick and Keyboard insered
3. Power on your devices while pressing the ''F12'' button
4. Now choose your USB device from the boot options
5. You'll get a few options, choose the option that fits your expectations
Note: I'd dualboot and install gummibootloader
6. Choose your prefered option and wait, the installation will run automatically
7. Once done, unplug everything and power off the device
8. When you turn your tablet back on, you'll see (if you've chosen option a. or b.) a menu with the option to boot Windows or Android
9. Navigate with volume DOWN key and select with volume UP key​
This Method could also be used for the Samsung XE700T
Thanks to
LuNaTum
For creating a guide on how to change DPI
For creating a guide on how to pair bluetooth devices to Android and Windows
__________________________________​
Q&A
Q:
How do I install Google Play Store and other Gapps?
A:
1. Download a root explorer from Internet in .apk format, I recommend ES file explorer. (I think you are familiar with the way to install these)
2. Go in ES file explorer, then click settings and enable root exploring and root access (allow any prompt)
3. Download GoogleServicesFramework.apk from here
4. Copy with ES file explorer the downloaded .apk to /system/app/
5. Now reboot the tablet into Android
6. Download PlayStore_v4.1.10.apk from here
7. Repeat step 4. and 5. with PlayStore_v4.1.10.apk
8. Congratulations, you've installed the Google Play Store
9. If you want to install other Gapps, download the .apk and repeat step 4. and 5.
Note: If you don't see the app installed after reboot, try changing the .apk's permission to RW-R--R-- and reboot again
Q:
I can't enter BIOS by holding ''Windows''-button and ''Power''-button
A:
1. Press ''Windows''-button and ''Power''-button at the same time
2. Let go when the ''Acer''-bootlogo appears
3. Congratulations, you've entered the BIOS
Q:
I can't boot from USB, because the secure boot prohibits it
A:
1. Enter BIOS by pressing ''Windows''-button and ''Power''-button at the same time
2. Set up a supervisor password
3. Congratulations, now you can disable secure boot
Q:
The ''Gummibootloader doesn't appear when booting, but Windows boots normally
A:
1. Enter BIOS by pressing ''Windows''-button and ''Power''-button at the same time
2. Change bootorder so Android comes in first place and Windows second
3. Congratulations, you've now got Gummibootloader at boot
Q:
Android-ia1 installed perfectly, but later versions fail to install
A:
1. Go to Acers site
2. Navigate to Home page > Support > Drivers and Manuals > Select [your..tablet] > BIOS
3. Download the latest BIOS
4. Update the devices BIOS
5. Congratulations, you'll be able to install Android-ia2 and later
Q:
What other devices will also be combatible with this method?
A:
Samsung XE700T
Q:
How to get bluetooth mouse and keyboard working on Android and Windows at the same time?
A:
1. Pair your bluetooth devices first with android and the with Windows
2. On Windows download PsExec
3.Then from downloaded file copy PsExec.exe in Windows to directory C:\Windows\System32 or to directory where your System32 folder is.
4. Write in the search cmd and run it as administrator
5. Then use command: psexec -s -i regedit.exe
6. Now go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BTHPORT\Parameters\Keys
7. From \Keys you can find your paired bluetooth devices. First there is the devices bluetooh mac address and 32 numbers long linkkey. Now write those linkeys and mac addresses up or copy them.
8. Now everything is set on Windows side. Next boot to android.
9. On android you need again for example ES file Explorer and R/W rights
10. With file Explorer fro root go to /data/misc/bluedroid/
11. Open file called BT_config.xml
12. From text find your devices using mac address
13. When you find you devices mac addres scroll down and you should see line with linkkey and 32 number code.
14. Now take that 32 number code you got from Windows
15 You have to change it little so the linkey works and here how it's done:
for example your Windows linkkey is "12345678qwertyuiasdfghjkpoiuytre" now set it as 8 number clusters like this
"12345678 qwertyui asdfghjk poiuytre"
Now you have to reverse those 8 number clusters
Take the set on far right "poiuytre" and mark it like this "po iu yt re"
Now reverse those pairs like this "re yt iu po"
Now "reytiupo" this is the first line in the new linkkey
Do the same for other three cluster. After it's done this example linkkey looks like this "reytiupojkghdfasuityerqw78563412"
16. When you have your modified Windows linkkey ready you can just replace the old one from the file BT_config.xml
17. Now just reboot android and your keyboard and mouse should work.
Q: How to change DPI from 213 to 160 (or something else)
A:
1. Get file manager on android like ES file Explorer
2. R/W rights to whole system on android
3. From root go to /system/etc/machine-props/
4. Open acer-w700.prop with ES Explorer and edit line "ro.sf.lcd_density = 213" and change 213 to 160
5. Reboot android and system should now be 160 DPI​

Could this work on the surface?
Sent from my SGH-T999 using xda premium

will this working on Iconia W500?

sstory792 said:
Could this work on the surface?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
mmm273 said:
will this working on Iconia W500?
Click to expand...
Click to collapse
Since these devices aren't officially supported by android-ia, because its android on Intel Architecture. On surface pro android-x86 might work, you can try installing it shown above
Sent from my HTC One X+ using xda app-developers app

Sorry I meant Surface RT
Sent from my SGH-T999 using xda premium

sstory792 said:
Sorry I meant Surface RT
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hmm, then this may not work since RT's processor is ARM based
Sent from my HTC One X+ using xda app-developers app

Pretty sure even if you didn't run into any architecture problems (and you will) trying this on RT, you'll probably be blocked by Secure Boot preventing the use of a non-Microsoft bootloader. We haven't managed to crack that yet. You can try it anyhow, and report back what you find, but don't expect it to work.

GoodDayToDie said:
Pretty sure even if you didn't run into any architecture problems (and you will) trying this on RT, you'll probably be blocked by Secure Boot preventing the use of a non-Microsoft bootloader. We haven't managed to crack that yet. You can try it anyhow, and report back what you find, but don't expect it to work.
Click to expand...
Click to collapse
That's right, Microsoft locked everything down, just as installing legacy software (although it won't run that fast with nvida processor
Sent from my HTC One X+ using xda app-developers app

mmm273 said:
will this working on Iconia W500?
Click to expand...
Click to collapse
No as that is a clovertrail device. Clovertrail is physically incapable of booting into anything other than windows 8, Intel locked it for this generation silicon only, bay trail has the restriction lifted.
sstory792 said:
Sorry I meant Surface RT
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thatgrass said:
Hmm, then you could try this image, but I can't promise anything at least this one isn't especially for x86 system
Sent from my HTC One X+ using xda app-developers app
Click to expand...
Click to collapse
surface RT is ARM. Android IA is android Intel architecture, ie, x86 with Intel extensions, ie Intel core i3 and above only. There is no such thing as an operating system which is not architecture locked, I would have looked into that before writing the tutorial if I were you....

SixSixSevenSeven said:
surface RT is ARM. Android IA is android Intel architecture, ie, x86 with Intel extensions, ie Intel core i3 and above only. There is no such thing as an operating system which is not architecture locked, I would have looked into that before writing the tutorial if I were you....
Click to expand...
Click to collapse
I wrote it for Acer iconia W700, my own device. I know how that device works, but other devices aren't well known by me.
Thanks for your information
Sent from my HTC One X+ using xda app-developers app

(big edit)
Many thanks for your help.
I followed your guide since I've got an Iconia W700, like you. Which option should I take? If I choose "run..." I got an error.
Live-installation works, though.
Did Bluetooth work in your sistem? In my w700 it just goes ON but doesnt recognize any device.
Suggestions?

Delete, because of Big edit above
Sent from my HTC One X+ using xda app-developers app

baffone001 said:
(big edit)
Many thanks for your help.
I followed your guide since I've got an Iconia W700, like you. Which option should I take? If I choose "run..." I got an error.
Live-installation works, though.
Did Bluetooth work in your sistem? In my w700 it just goes ON but doesnt recognize any device.
Suggestions?
Click to expand...
Click to collapse
Bluetooth does not function under Android-IA, its in their FAQ.

SixSixSevenSeven said:
Bluetooth does not function under Android-IA, its in their FAQ.
Click to expand...
Click to collapse
Thanks guys for your help
I'll wait they fix bluetooth.... it is worthless for me this way because I need android for GPS-mapping programs, which I only use with an external gps-bluetooth receiver...
I can't find a good gps-offline-software for windows... (like sygic for android, for example)

baffone001 said:
Thanks guys for your help
I'll wait they fix bluetooth.... it is worthless for me this way because I need android for GPS-mapping programs, which I only use with an external gps-bluetooth receiver...
I can't find a good gps-offline-software for windows... (like sygic for android, for example)
Click to expand...
Click to collapse
Hit up the car computer forums, they often manage to hunt down absolute gems of GPS navigation software.
Alternatively, there are quite a few good linux navigation software suites out there apparently. Ubuntu is reasonably easy for a newcomer to use and also works alright with touch, I prefer linux mint normally but it doesnt play so nicely with touch (but it may be possible to install the ubuntu UI atop mint as mint is already a fork from ubuntu).
3rd choice. An FTDI cable may work under Android-IA in which case you can use one of the many serial GPS units out there. Most bluetooth GPS recievers are just serial based units with a bluetooth radio attached in the SPP mode.
I think the bluetooth should work fine with the linux option.

SixSixSevenSeven said:
I think the bluetooth should work fine with the linux option.
Click to expand...
Click to collapse
I've always been a big fan of ubuntu. I used to have Lubuntu like only OS on my old 1000H eeepc.
But I lost a day and a full night trying to install Ubuntu 13.04 on this w700 keeping Win8 (so, dual boot) and I got really MAD since there's no way it could recognize the hard-drive partitions. I have to abort the linux thing at the moment, hoping that 13.10 or whatever could solve the problem I have with Acer W700.
I think I'll try Autoroute or some freeware option....

SixSixSevenSeven said:
Bluetooth does not function under Android-IA, its in their FAQ.
Click to expand...
Click to collapse
but under the major change for Version: android-4.2.2_r1-ia2,they did mention the bluetooth is working
Major Changes:
* Secure-boot support (not default)
* Mesa rebased onto freedesktop upstream
* Bluetooth working on Iconia W700 (bluedroid stack)
* ADB TCP sessions auto-reconnect
* Linux kernel 3.9.1
however i faced the same problem..live installation work only,able to turn on the bluetooth but unable to connect to other devices..guess have to wait for more update

baffone001 said:
I've always been a big fan of ubuntu. I used to have Lubuntu like only OS on my old 1000H eeepc.
But I lost a day and a full night trying to install Ubuntu 13.04 on this w700 keeping Win8 (so, dual boot) and I got really MAD since there's no way it could recognize the hard-drive partitions. I have to abort the linux thing at the moment, hoping that 13.10 or whatever could solve the problem I have with Acer W700.
I think I'll try Autoroute or some freeware option....
Click to expand...
Click to collapse
There is a guide on these forums for installing ubuntu on the surface pro which under the hood is essentially the same device as the W700. Might be worth taking a look at to see if it offers any help.

marcus70 said:
but under the major change for Version: android-4.2.2_r1-ia2,they did mention the bluetooth is working
* Bluetooth working on Iconia W700 (bluedroid stack)
however i faced the same problem..live installation work only,able to turn on the bluetooth but unable to connect to other devices..guess have to wait for more update
Click to expand...
Click to collapse
See? I experience the same you do on my W700. Let's hope for an update :good:
There is a guide on these forums for installing ubuntu on the surface pro which under the hood is essentially the same device as the W700. Might be worth taking a look at to see if it offers any help.
Click to expand...
Click to collapse
Hi Six, thanks for answering. Can't find the guide, though. Would you please link me whenever you have a second? Thanks in advance

baffone001 said:
See? I experience the same you do on my W700. Let's hope for an update :good:
Hi Six, thanks for answering. Can't find the guide, though. Would you please link me whenever you have a second? Thanks in advance
Click to expand...
Click to collapse
http://www.geek.com/microsoft/how-to-install-ubuntu-on-the-surface-pro-1539262/
The forum thread only linked to that page, might aswell skip the middle man.

[Q] Really nervous about accidentally bricking, so just some cautionary questions...

So I have an Optimus G LS970, added a couple apps, but other than that it's pretty basic. I'm wanting to root this device and eventually add a custom rom on it perhaps, but I've very new to this and don't want to accidentally brick my device.
1) I've been looking for stable linux rooting methods, the only one I've found that looks promising is here, but it's 2 years old. Does anyone know anything about it's stability for android 4.1.2, kernel 3.4.0?
2) In order to transfer files (music, pictures, pdfs/ebooks) to/from my device it needs to be mounted, but I haven't been able to mount it for this (or any other) purpose at all. It shows up as connected (command "lsusb" shows "Bus 002 Device 028: ID 1004:631d LG Electronics, Inc.") but it won't mount. Will this be possible once rooted, or is there some other cause to this?
3) Once rooted, I want to get rid of some of the Preinstalled apps but I'm not sure which will lead to instability and which would be fine to remove, does anyone know where I can check this, or would I just need to list all the apps I don't want on my phone and have you all tell me on an app-by-app basis which is safe to remove?
4) Lastly, when it comes to using alternative app markets, I haven't had much luck. I was trying to test using alt stores with f-droid and nothing showed in the lists, so I don't know if that's a thing with f-droid or my device. Is there anything you need to do to use alt app stores aside from enabling it in the system settings, and installing the app store's .. app?
Thanks in advance!

JustAk said:
So I have an Optimus G LS970, added a couple apps, but other than that it's pretty basic. I'm wanting to root this device and eventually add a custom rom on it perhaps, but I've very new to this and don't want to accidentally brick my device.
1) I've been looking for stable linux rooting methods, the only one I've found that looks promising is here, but it's 2 years old. Does anyone know anything about it's stability for android 4.1.2, kernel 3.4.0?
2) In order to transfer files (music, pictures, pdfs/ebooks) to/from my device it needs to be mounted, but I haven't been able to mount it for this (or any other) purpose at all. It shows up as connected (command "lsusb" shows "Bus 002 Device 028: ID 1004:631d LG Electronics, Inc.") but it won't mount. Will this be possible once rooted, or is there some other cause to this?
3) Once rooted, I want to get rid of some of the Preinstalled apps but I'm not sure which will lead to instability and which would be fine to remove, does anyone know where I can check this, or would I just need to list all the apps I don't want on my phone and have you all tell me on an app-by-app basis which is safe to remove?
4) Lastly, when it comes to using alternative app markets, I haven't had much luck. I was trying to test using alt stores with f-droid and nothing showed in the lists, so I don't know if that's a thing with f-droid or my device. Is there anything you need to do to use alt app stores aside from enabling it in the system settings, and installing the app store's .. app?
Thanks in advance!
Click to expand...
Click to collapse
All of your questions are answered here. http://forum.xda-developers.com/showthread.php?t=2050582
And the FAQ.
1. See above
2. Install the LG drivers, link is in that OP, then tick MPT. That should transfer your files. If not, you may need to uninstall, then reinstall them.
3. DO NOT remove any apps unless you unlock! Info is in that link also.
4. I have no idea on that one.
Sent from my LG-LS970 using XDA Premium 4 mobile app

engine95 said:
All of your questions are answered here. http://forum.xda-developers.com/showthread.php?t=2050582
And the FAQ.
1. See above
2. Install the LG drivers, link is in that OP, then tick MPT. That should transfer your files. If not, you may need to uninstall, then reinstall them.
3. DO NOT remove any apps unless you unlock! Info is in that link also.
4. I have no idea on that one.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
1) *EDIT* [Doesn't say anything about linux rooting, how am I supposed to install a windows drive on a linux system?] I overlooked the linux mention. Thanks! Can't find something. How/where do I find adb?
2) Ignore, see 1) [Again, how am I supposed to install the Windows driver in linux?]
3) Thanks for that. I didn't know the importance of unlocking the bootloader.

JustAk said:
1) *EDIT* [Doesn't say anything about linux rooting, how am I supposed to install a windows drive on a linux system?] I overlooked the linux mention. Thanks! Can't find something. How/where do I find adb?
2) Ignore, see 1) [Again, how am I supposed to install the Windows driver in linux?]
3) Thanks for that. I didn't know the importance of unlocking the bootloader.
Click to expand...
Click to collapse
Sorry bout that. Linux drivers are native, so they're anyway installed.
You use either fiddy629 root for Linux, or Framaroot.
Sent from my LG-LS970 using XDA Premium 4 mobile app
---------- Post added at 10:53 PM ---------- Previous post was at 10:51 PM ----------
Edit. You don't have to have ADB, but there's alot of info if you google it.
Sent from my LG-LS970 using XDA Premium 4 mobile app

engine95 said:
Sorry bout that. Linux drivers are native, so they're anyway installed.
You use either fiddy629 root for Linux, or Framaroot.
Sent from my LG-LS970 using XDA Premium 4 mobile app
---------- Post added at 10:53 PM ---------- Previous post was at 10:51 PM ----------
Edit. You don't have to have ADB, but there's alot of info if you google it.
Sent from my LG-LS970 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried fiddy619's thing here using the universal linux one. It asked me for ADB. Found that debian has "android-tools-adb" so I installed that, now there's this:
Code:
Using: /usr/bin/adb
Waiting for device... Connect your LGOG via USB in Charge Only Mode
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Device found
Beginning Root Process
Disconnect your phone from USB
Disable USB Debugging
Enable USB Debugging
Press enter to Continue
I can't tell if this is telling me to do these things, or if it's saying it already did them. Any idea?

JustAk said:
I tried fiddy619's thing here using the universal linux one. It asked me for ADB. Found that debian has "android-tools-adb" so I installed that, now there's this:
Code:
Using: /usr/bin/adb
Waiting for device... Connect your LGOG via USB in Charge Only Mode
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Device found
Beginning Root Process
Disconnect your phone from USB
Disable USB Debugging
Enable USB Debugging
Press enter to Continue
I can't tell if this is telling me to do these things, or if it's saying it already did them. Any idea?
Click to expand...
Click to collapse
Nevermind that, I got it working just fine. took o nly a couple seconds and it was done. Now I have "SuperSU" in my apps menu, so I'm guessing it worked.

JustAk said:
Nevermind that, I got it working just fine. took o nly a couple seconds and it was done. Now I have "SuperSU" in my apps menu, so I'm guessing it worked.
Click to expand...
Click to collapse
Awesome, glad to hear it worked! Which if you have SuperSU it should have. I too only use linux(Linux Mint specifically) and while most guides are made for Windows, things are usually easier from the linux terminal because we don't need to download drivers, android uses a modified linux kernel, etc. Welcome to the forums, glad to have you here! All the info you need is here and plenty of people will be glad to help(as engine has already demonstrated). As for the alternative app markets, Ive read plenty and tested a few but really, nothing comes close to the play store. On our phone Banks Gapps is the standard google apps package to install if you are flashing a custom rom. Just make sure you get the correct version of gapps for the version of android your rom is based on.

HPTesla said:
Awesome, glad to hear it worked! Which if you have SuperSU it should have. I too only use linux(Linux Mint specifically) and while most guides are made for Windows, things are usually easier from the linux terminal because we don't need to download drivers, android uses a modified linux kernel, etc. Welcome to the forums, glad to have you here! All the info you need is here and plenty of people will be glad to help(as engine has already demonstrated). As for the alternative app markets, Ive read plenty and tested a few but really, nothing comes close to the play store. On our phone Banks Gapps is the standard google apps package to install if you are flashing a custom rom. Just make sure you get the correct version of gapps for the version of android your rom is based on.
Click to expand...
Click to collapse
Ah. brilliant, thanks!
The only problem I'm now having is getting the phone to connect to my computer so I can transfer music or ebooks or whathaveyou to/from my device. I've gone through the arch wiki for android (even though I'm running debian) and this forum postt but I keep getting an error:
Code:
$ android-connect
Listing raw device(s)
Device 0 (VID=1004 and PID=61f9) is a LG Electronics Inc. V909 G-Slate.
Found 1 device(s):
LG Electronics Inc.: V909 G-Slate (1004:61f9) @ bus 2, dev 8
Attempting to connect device
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
Android device detected, assigning default bug flags
Error 1: Get Storage information failed.
Error 2: PTP Layer error 02fe: get_handles_recursively(): could not get object handles.
Error 2: (Look this up in ptp.h for an explanation.)
Listing File Information on Device with name: (NULL)
LIBMTP_Get_Storage() failed:-1
I can start a separate thread regarding this issue, but if you have any insight, figured it couldn't hurt to ask real quick.

JustAk said:
Ah. brilliant, thanks!
The only problem I'm now having is getting the phone to connect to my computer so I can transfer music or ebooks or whathaveyou to/from my device. I've gone through the arch wiki for android (even though I'm running debian) and this forum postt but I keep getting an error:
Code:
$ android-connect
Listing raw device(s)
Device 0 (VID=1004 and PID=61f9) is a LG Electronics Inc. V909 G-Slate.
Found 1 device(s):
LG Electronics Inc.: V909 G-Slate (1004:61f9) @ bus 2, dev 8
Attempting to connect device
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
Android device detected, assigning default bug flags
Error 1: Get Storage information failed.
Error 2: PTP Layer error 02fe: get_handles_recursively(): could not get object handles.
Error 2: (Look this up in ptp.h for an explanation.)
Listing File Information on Device with name: (NULL)
LIBMTP_Get_Storage() failed:-1
I can start a separate thread regarding this issue, but if you have any insight, figured it couldn't hurt to ask real quick.
Click to expand...
Click to collapse
This may or may not help, but when I've had issues with Linux hooking up I've had to format my SD. Something gets stuck in there that Linux just didn't like.
Sent from my LG-LS970 using XDA Premium 4 mobile app

JustAk said:
Ah. brilliant, thanks!
The only problem I'm now having is getting the phone to connect to my computer so I can transfer music or ebooks or whathaveyou to/from my device. I've gone through the arch wiki for android (even though I'm running debian) and this forum postt but I keep getting an error:
Code:
$ android-connect
Listing raw device(s)
Device 0 (VID=1004 and PID=61f9) is a LG Electronics Inc. V909 G-Slate.
Found 1 device(s):
LG Electronics Inc.: V909 G-Slate (1004:61f9) @ bus 2, dev 8
Attempting to connect device
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
Android device detected, assigning default bug flags
Error 1: Get Storage information failed.
Error 2: PTP Layer error 02fe: get_handles_recursively(): could not get object handles.
Error 2: (Look this up in ptp.h for an explanation.)
Listing File Information on Device with name: (NULL)
LIBMTP_Get_Storage() failed:-1
I can start a separate thread regarding this issue, but if you have any insight, figured it couldn't hurt to ask real quick.
Click to expand...
Click to collapse
Are you doing this with the phone turned on and booted into the os? It gives you a PTP error first, make sure the phone is in MTP. At the bottom you also have a LIBMTP error tho. I don't have much experience with debian but from what I understand it is extremely stable but the downside is that it can be a bit out of date at times. Ubuntu and all ubuntu derivatives had a major mtp flaw awhile back but it has since been fixed. Im not sure if it has been fixed in debian. Yes ubuntu is based off of debian, but just like linux mint will add things to the ubuntu base, ubuntu will do the same to the debian base. So LIBMTP MAY be out of date, Im not sure. I know that I have no problem seeing my phone from either the terminal or file browser. Check this out and see if it helps any.
If not you may have to follow engine's advice and format the sd.
EDIT: Also this might work, it is for linux mint but adding the repository and installing it should work on debian(I think) since they all use .deb files. Before ubuntu officially supported mtp by default this was the most popular work around.

HPTesla said:
Are you doing this with the phone turned on and booted into the os? It gives you a PTP error first, make sure the phone is in MTP. At the bottom you also have a LIBMTP error tho. I don't have much experience with debian but from what I understand it is extremely stable but the downside is that it can be a bit out of date at times. Ubuntu and all ubuntu derivatives had a major mtp flaw awhile back but it has since been fixed. Im not sure if it has been fixed in debian. Yes ubuntu is based off of debian, but just like linux mint will add things to the ubuntu base, ubuntu will do the same to the debian base. So LIBMTP MAY be out of date, Im not sure. I know that I have no problem seeing my phone from either the terminal or file browser. Check this out and see if it helps any.
If not you may have to follow engine's advice and format the sd.
EDIT: Also this might work, it is for linux mint but adding the repository and installing it should work on debian(I think) since they all use .deb files. Before ubuntu officially supported mtp by default this was the most popular work around.
Click to expand...
Click to collapse
The first thing you linked to (steneteg.org or somesuch) was another avenue I went down trying to solve this, but alas it resulted with much the same problems. The second link to the linuxmint forums looked very promising, the only problem with it is the ppa has been dropped by webupd8 so it no longer is available (404s).
I have just discovered earlier today that adb push/pull works for getting things onto/off of my device, but I can't use adb to mount the device to allow it to be seen with a filemanager (thunar in this case). So, that's progress I think.
EDIT : I just saw mention somewhere of androidair, have yyou any experience with this app's reliability/security?

JustAk said:
The first thing you linked to (steneteg.org or somesuch) was another avenue I went down trying to solve this, but alas it resulted with much the same problems. The second link to the linuxmint forums looked very promising, the only problem with it is the ppa has been dropped by webupd8 so it no longer is available (404s).
I have just discovered earlier today that adb push/pull works for getting things onto/off of my device, but I can't use adb to mount the device to allow it to be seen with a filemanager (thunar in this case). So, that's progress I think.
EDIT : I just saw mention somewhere of androidair, have yyou any experience with this app's reliability/security?
Click to expand...
Click to collapse
You can try searching for other places where go-mptfs is located, other ppas where it still might be. The ubuntu forums also has this as a possible solution. I haven't used androidair but I have moved files over wifi using the sshdroid app and an ssh server on my pc with great success. If you have any experience with ssh that could be a possible solution although it is obviously slower than usb. But ssh in general is a simple and great tool, also pretty secure since you are simply connected to your home wifi - as long as your wifi is secure you should be fine.
On my pc I believe its openssh that I use - plenty of tutorials out there for that - and here is the link to sshdroid in the play store. Hope this helps!
EDIT: I will also be at work until 2p.m. EST so may not be able to reply back until then - don't worry, I will as soon as I get home if you have any other issues.