i'm trying to connect to my home network. It see's it and connects to it... but then straight after it connects to it it totally disconnects and the wifi is turned off... what could be the probelm?
Did the problem persist after soft-reset? If yes, did u install any profiles manager (like phoneAlarm etc. which u can switch wifi on specific time) or did u changed any wifi settings using advanced config/hdtweak/similar apps?
I have an issue with wifi where when i use my works wifi it connects and then should i check IP it clearly shows the works network, however...
when at home and connect to my home wifi it still says connected however when i check my network IP the browser is clearly using the t-mobile 3G internet.
It's baffling to say the least. I've tried closing browser, changing order i open connections etc but to no avail.
Any thoughts?
I have a problem with my wifi, at work I connect to a Addon wireless router and most of the time it works ok.
But at the moment I'm having a problem where the phone finds the network, says remembered, secured with wpa/wpa2 psk, then it suddenly drops to not in range and my wifi status is 'disconnected'
It continously is doing this at the moment and just wont connect, the WPA key is correct for it as I have connected fine to the router before.
kevinsmbuk said:
I have a problem with my wifi, at work I connect to a Addon wireless router and most of the time it works ok.
But at the moment I'm having a problem where the phone finds the network, says remembered, secured with wpa/wpa2 psk, then it suddenly drops to not in range and my wifi status is 'disconnected'
It continously is doing this at the moment and just wont connect, the WPA key is correct for it as I have connected fine to the router before.
Click to expand...
Click to collapse
is the signal weak? i.e are you far from the wireless router?
Im sitting next to router and the signal is Excellent
Is there anything on the router that could be blocking my phone from connecting?
yes if someone has setup mac address filtering
Mac restrict mode = disabled
i have a router that every 3months or so i have to reboot!
i see it in the wifi available list but it won't connect
turn off and back on and hey presto.
not ideal i know but hey ho
could try a reboot on phone too
Hi,
I m facing a problem in wifi, Whenever i connect my phone to my laptops adhoc network it connects successfully but after few seconds it automatically disconnects and wont connect again untill turning off and on of wifi on phone.
I m using virtual router software or creating adhoc network as connectify isn't showing up in my phone.
any idea whats going on?
I'm not sure what my problem is. When I connect my Note 4 to my wifi it says that my network may not provide internet. In addition, it shows "(secured)" next to my SSID name. The phone then connects to the internet, but it doesn't have internet. I think the problem has to do with the fact that my wifi is being brodcasted on 5Ghz. I attached an image of my wifi settings. Does anyone have any ideas of what to change on the router or my phone? Thanks.
As pathetic as it sounds, I simply restarted my phone and reconnect to the network at it is working great. Go figure.
Hi
If I understand correctly the wifi will only work if the phone is close by
I read elsewhere that other smart watches will connect directly to wifi
even if the phone is not on
can someone please clarify & will this option come with future updates ?
Thanks
The phone needs to be only in a close range if you're connected by Bluetooth. If you're connected to a WiFi network, the phone just needs an internet connection and can be on the other side of the world.
foo said:
The phone needs to be only in a close range if you're connected by Bluetooth. If you're connected to a WiFi network, the phone just needs an internet connection and can be on the other side of the world.
Click to expand...
Click to collapse
Thanks Foo
But it doesn't seem to be the case with mine
If I am at home or at work it will connect easily with the Wifi but only if the phone is there
without the phone its saying disconnected , maybe I am missing something
I did a test recently with mine. I left my paired smartphone (Smartphone_A) far out of range of my watch (>100m within a company building). The watch signaled that it is disconnected as it was only connected by Bluetooth before. The smartphone itself was only connected to a 3G network (no WiFi active).
I used a second smartphone (Smartphone_B, obviously not paired with the watch) and activated the mobile hotspot on it. I connected the watch to the mobile hotspot using WiFi and was able to connect to my paired smartphone:
Code:
Watch<---WiFi<--->Smartphone_B<--------->3G mobile data<--------->Smartphone_A
<--------------------receive notifications-------------------------->
I was really surprised that this worked, but it did, so I'm pretty sure, that they do not have to be both connected to the same WiFi or be within a close range.
The question is, why is it not working for you. How do you check, that you are connected to the WiFi?
foo said:
I did a test recently with mine. I left my paired smartphone (Smartphone_A) far out of range of my watch (>100m within a company building). The watch signaled that it is disconnected as it was only connected by Bluetooth before. The smartphone itself was only connected to a 3G network (no WiFi active).
I used a second smartphone (Smartphone_B, obviously not paired with the watch) and activated the mobile hotspot on it. I connected the watch to the mobile hotspot using WiFi and was able to connect to my paired smartphone:
Code:
Watch<---WiFi<--->Smartphone_B<--------->3G mobile data<--------->Smartphone_A
<--------------------receive notifications-------------------------->
I was really surprised that this worked, but it did, so I'm pretty sure, that they do not have to be both connected to the same WiFi or be within a close range.
The question is, why is it not working for you. How do you check, that you are connected to the WiFi?
Click to expand...
Click to collapse
Strange
with my phone on no problems it shows my house & work network on the watch & connects showing the correct SSID
with phone off I tested it 2 ways 1 clicked on google app (disconnected ) 2 Settings- About -Connection (disconnected )
Brgds
I see the problem, I also may have misunderstood the actual problem.
The status (Google app/about) which you are referring to shows if you're connected to your watch. If your phone is off, the watch can't connect to the phone. Even if the watch is connected to your WiFi, the watch will not go directly to the internet, but will use the WiFi connection to connect to your phone (cloudsync).
You can check the WiFi connection in the WiFi setting. See if the watch was assigned an IP address, if there is one, then you're connected to the WiFi.
I think you expected that the watch can directly connect to the internet and use things like Google now directly. but this is not possible.
foo said:
I see the problem, I also may have misunderstood the actual problem.
The status (Google app/about) which you are referring to shows if you're connected to your watch. If your phone is off, the watch can't connect to the phone. Even if the watch is connected to your WiFi, the watch will not go directly to the internet, but will use the WiFi connection to connect to your phone (cloudsync).
You can check the WiFi connection in the WiFi setting. See if the watch was assigned an IP address, if there is one, then you're connected to the WiFi.
I think you expected that the watch can directly connect to the internet and use things like Google now directly. but this is not possible.
Click to expand...
Click to collapse
Yes
I checked a few things, my phone was on & the google app works, turn phone off & the google app says disconnected
in wifi settings even with phone off it says obtaining IP then connects so I thought it would connect to google app
so if I understand correctly it wont connect directly to internet but the phone (cloudsync) even if the phone is on or off
Thanks for taking the time to clarify
tclough said:
so if I understand correctly it wont connect directly to internet
Click to expand...
Click to collapse
correct
tclough said:
but the phone (cloudsync) even if the phone is on or off
Click to expand...
Click to collapse
it will connect to the phone by cloudsync only if the phone is on.
foo said:
correct
it will connect to the phone by cloudsync only if the phone is on.
Click to expand...
Click to collapse
Thanks
all seems a bit pointless to have a wifi connection but cant really use it do anything
maybe some apps or updates in the future that will utilize the wifi option ??
Thx
I guess wifi is just helpful if you get out of range of the Bluetooth connection.
At home I often get out of range of the Bluetooth connection so the watch connects to my wifi and reconnects to my watch via cloudsync as long as I stay out of Bluetooth range.
When the watch gets back in reach it connects via Bluetooth again, because this is much better for battery life.
So wifi is only there to increase range but unfortunately not for standalone functionality. I also have a Youtube client and a webbrowser on my watch (just for fun, not really useful). Both apps also need the watch and will not use a direct wifi connection to load videos/websites from the Internet.