Develop Bugs

Failed to get PMT info, is it bricked for good?

Hi,
So today suddenly my phone restarted and after that it was stuck on the micromax logo, I coudnt get into recovery either. So I tried to flash the stock kitkat rom using sp tools, it did manage to flash it the first time but the phone after that wont start at all, nothing not even the charging screen.
Is it bricked for good? I tried to flash it again but if I choose firmware upgrade or download+firmware upgrade in sp tools I get the pmt info error. Is there any way to get the phone back to a working state? Any help would be much apprecited.
Note: I did look through the old post on the similar topic where the guy managed to solve the problem by using a latest version of sp tools, Im already using the latest version , no dice.

Did you get anywhere with this to unbrick the device as I have similar with a GDP XP and it wont now boot or show charge its just dead!
Any help on fixing this would be great as we cant be alone with this. ATB

Dead android one, last ditch effort.

Hey guys,
So my canvas a1 died after I flashed the stock kitkat rom on it using sptools coz it was stuck at the micromax logo. It has been a while since and Ive gotten a new phone but in last attempt to see if it is recoverable or scrap I'm posting this.
The Problem:
-Phone is completely dead wont power up or charge but is detected by sptool, so cant into fastboot or recovery mode.
- Windows detects the phone too with a notification sound and then says usb devices connected is not recognised
-I can still flash all+download using sptool I tried both Lollipop as well as stock kitkat roms,still its the same dead.
-If I try to use firmware upgrade in sptool I get this error: proinfo: failed to get PMT info
I've looked at quite a few threads and forums to no avail.If any one knows a solution to the problem it would be much appreciated.

Android one (Canvas A1) Bricked while flashing ROM.

Hi All,
Please help me My device is bricked when Flashing Lolipop 5.1.1 ROM in Device using "SP Flash Tool"
Current Condition...
is that I am not able to start Recovery mode in device because it not get power on, even not indicating Charging while plugin.
- But I getting Sound while plugin it with my computer but not displayed as drive.
- I think still it might has pre bootLoader.
- I also checked it in Device Manage in my computer it shows there but it attached and detached automatic continueeee.
Your Suggestions and help would be appreciated.
What Happen Previously With device.
1.) when i had getting continuous Force stop in play services with my 5.1.1 stock ROM and one day device was bricked i got SP Tool and find out KitKat 4.4.4 ROM along with it. Follow steps and done.
2.) In Flashed ROM getting Same problem and installed Flash ROM 2 to 3 times in Couple of months than after take the system update of 6.1.1 and after couple of weeks continuously same problem with play services.
3.)Once i tried with Lolipop 5.1.1 with SP tool and than after device is Bricked

You should flash the stock rom using sp flash tools. That might solve the problem.

You should flash the stock rom using sp flash tools. That might solve the problem.
Thanks for reply
I have been done this things too couple of times but nothing happen,
Please suggest any alternative...

Govind23 said:
You should flash the stock rom using sp flash tools. That might solve the problem.
Thanks for reply
I have been done this things too couple of times but nothing happen,
Please suggest any alternative...
Click to expand...
Click to collapse
If SP tools is not working then Only alternate is the service centre.

Canvas A1 - Sprout 4 Hardbricked.SP Flashtool won't work.

My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.

Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Can anyone please help.

same thing happened to me but no solution

bunny374 said:
same thing happened to me but no solution
Click to expand...
Click to collapse
Now I suspect it is a hardware problem.Probably motherboard has failed.

Same problem here. SP Flash tool flashing successfully but phone won't even boot up

Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Must be problem with your charger use frog charger that worked for me after using different usb cables it happens..

Flashed Kitkat On LGUP need help

OK so my old G3 (lets call this one G31)has a broken digitizer, but I had another G3 (lets call it G32)and I just switched their motherboards after I flashed KK on LGUP while G32 was on MM. So the G32 was fully and wouldn't boot. Then I tried to wipe it through its stock recovery and now it always goes to the android with that thing through its chest. At the moment I didn't care so I put the G31 motherboard in the G32 shell and screen. Everything worked and still had my data. Then one day it fell and the motherboard snapped. So now I want to fix the G32 but it doesn't boot and anytime I try to flash anything it never goes past 6% on LGUP and says communication failure. It goes to download mode but doesn't boot. I believe I also flashed the wrong Kdz because the phone is LGD852 Rogers and I flashed a Bell Kdz. Any help would be appreciated.