Related
I was browsing around on ebay and found a multimedia dock for our beloved TB's. Its deff not the highest quality dock i have ever seen, but it looks like a viable replacement until Verizon or HTCpedia release the official one. It doesnt look like it is slanted slightly to have a nice viewing angle but still its $30...the one from Verizon is $60. Let me know what you guys think.
http://cgi.ebay.com/USB-Sync-Battery-Charger-Cradle-HTC-Thunderbolt-4G-/380333733043?pt=PDA_Accessories&hash=item588da834b3
That one has been available for a little while now. There is a thread where someone has a link for it cheaper also. I'm holding out for the Verizon one.
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
halopower said:
I would avoid this one, I purchased one from amazon and returned it the same day. The viewing angle is horrible, it is difficult to put in and take off (almost dropped my TB taking it off), and worst part about it, It did not charge the phone. All the lights worked on it, but would not produce a charge. I will wait for the verizon one if it ever comes out.
Click to expand...
Click to collapse
aw really? i wanted to get this only for charging purposes but whats the point if it doesnt charge
Bah, Noob with first smartphone here! I failed to read any replies, and jumped at the deal, and even ordered the silicon soft case from the same guy.
I want to plug the phone into my Roku box's USB to show videos and pictures I took on the phone. I went to the Verizon store and they said that their multimedia cradles would be available soon, but so far 3 weeks have past and no cradle.
Well, I guess I could fix it if it don't work, I just hope that the extended battery fits.
I bought the soft case to see if I could cut out the extended battery hump easily with a laser engraver.
Misleading title, please change.
Hmm... I've been wanting a cradle for awhile now. So I jumped on this offer, and like any good online buyer, I look for reviews on the product AFTER I buy it. Can you guys confirm that this won't charge the phone? I was just looking for something to hold the phone up while I use WiFi keyboard. :/
http://www.amazon.com/gp/product/B004JX1FOY?tag=5336653508-20
OK I have this dock but I knew going in what it was going to be about so I can give you an idea of what you're getting.
The dock has two connectors on it. One is a USB cable (removable) and one is an A/C plug. The A/C plug is there ONLY to charge the second battery and does not charge the bolt when plugged into the dock. It WILL charge the extended battery (the OEM extended batt does fit in the spare battery slot) but not when it's actually on the Bolt. You can't fit the Bolt in the dock with anything other than the stock battery on it.
The USB cable plugs from the dock into (duh) a USB port on your PC. When it's plugged into the USB port the Bolt does detect the connection and I have been able to charge the Bolt this way. I've also been able to mount the SD card this way to move files and stuff. It doesn't charge as fast being USB vs wall charger but it does charge it. I'm looking at it right now and it just charged it to 100 percent.
The USB cable will not plug directly into the Bolt. It's Mini USB and not Micro USB. Another issue is that you can forget leaving the Bolt in a case and putting it on this dock. It will not fit with any case that I've seen. As was previously mentioned the viewing angle is a bit harsh (it's not angled.) It's basically a straight up and down mount so unless you're putting the dock somewhere at least at eye level it's not as easy to view.
This dock also has NO HDMI port on it. I have mine at work because I don't need the HDMI here. I'm going to get the OEM dock for home use since it's expected to have the HDMI out.
So to summarize it does charge the Bolt's stock battery in the dock as well as the extended in the spare battery slot. You can use the USB functions while plugged into the dock. I'm streaming Pandora right now while docked. The viewing angle is a bit harsh when the dock sits below eye level. The Bolt charges over USB with this dock. The spare battery will only charge via the attached A/C plug. You can't charge it in a case. The USB cable (removable) is mini USB NOT Micro USB and there is no HDMI.
Hope this helps.
ETA: I should add that you could use one of those USB to A/C adapters and plug the USB cable from the dock into A/C and charge that way (if you just wanted a faster charging solution.) I have tested it and it does charge that way.
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
BigMcGuire said:
Many thanks Cubs2008 ! This is exactly what I was looking for. I feel bad that I bought the dock on Ebay for $27 when I could have gotten it on Amazon for less, but lesson learned. Glad to know that I can charge the phone and the battery! Now to figure out the viewing angle problem (post it notes under the front end?). lol.
Click to expand...
Click to collapse
I paid even more ($34 I think) but it does what I need it to for now. If I needed HDMI at work I'd have waited but no point in that.
As for the viewing angle it's really not too bad if you can raise the dock more to your eye level. It does wiggle a little bit left to right in the dock (but very little.) You could put it on a book or something that would raise it up and it's fine. I sit pretty low at my desk in my chair so it's not nearly as much of an issue for me (and it's not quite at eye level.)
There is one more thing I forgot to add...someone mentioned getting it in and out of the dock being a pain and I totally agree. It's due to the fact that it basically sits almost upright in the dock. There are times where I've gotten frustrated just trying to get it in or out of there. It's because I always think of angling it into the dock rather than going straight down with it. When I do drop it straight in it usually slides right in with no issue. However I also have a Zagg max coverage shield on my Bolt so I may have more of an issue because of that.
Good luck!
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
pdxdon said:
Thanks for the information, Cubs2008! Very much appreciated.
Wish I had a contact at a factory in China... probably wouldn't be very difficult to produce a better quality desktop dock at a competitive price!
Click to expand...
Click to collapse
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Cubs2008 said:
No kidding! If they would've angled the dock in front just a little bit and added an HDMI port this thing would've slayed the OEM dock. It still does a lot on its own IMO and we probably would've seen the dock for $60+ instead of around $30.
I'll still get the OEM dock when it comes out but this one does do what I need it to at work. Yay.
Click to expand...
Click to collapse
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
The dock arrived today...
Here is the lowdown after disassembling it:
It looks to be assembled by children with a hot glue gun and old fashioned soldering gun. There is gobs of hot glue used to hold in the 2 LED's. One is an insanely bright blue led, and the other, untested and discarded, is a bi-color led.
There are 2 completely isolated circuits inside, one being a simple micro-USB connector on a cable that is hot glued in place, with the blue LED tapped off the 5V from the USB. I could not find any resistor inline with the LED, so it's lifespan is questionable at best.
The second circuit is the battery charger board held in place with 1 screw at one end, and the mini-USB socket at the other. It has wires to the bi-color LED. This is powered by a 5V 1A wall wart. It does not supply any power to the USB that connects to the phone
The LED's have their full length of lead wire in tact, with over-sized shrink tubing loosely covering them, and all that excess lead wire is sticking out of the hot glue like cat whiskers.
In effect it electrically comparable to a $5 battery charger, and a separate $1 USB to micro-USB cable, nothing more.
There is no media functions whatsoever. It is difficult and time consuming to plug the phone into the cradle, and you cannot use it with the extended battery or any type of case.
Advice: pass! Use your easier to plug in HTC USB cable, and if you want a separate battery charger, get another brand.
lippstuh said:
they can't just add an HDMI port just like that. if they could we already would see a post on here about a hdmi cable.
Click to expand...
Click to collapse
They probably could've when they manufactured it.
wow, Cubs2008 thanx for the indepth info!
I wanted to add to the topic that you can actually stand the entire dock upright with the Bolt plugged in and the extended battery in there and it will stay standing up. I'd advise placing the battery and the Bolt in it landscape and then pick the entire dock up and it will stand up. I've used it this way with no ill effects.
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
4Geezy ON DopeDiculous's ROOTED TBeezy!
dopediculous said:
I work for vzw and the Samsung charge and thunderbolt have a charging dock that not only charges, but comes with an extra battery that charges in the dock itself. Should be released very soon.
Click to expand...
Click to collapse
How soon is "very soon" then?
http://www.amazon.com/RAVPower®-Wir...F8&qid=1393455689&sr=8-3&keywords=ravpower+s3
After getting my Nexus 5 and getting spoiled with wireless charging, it was quite troublesome to charge via a usb cable when using my s3 as a secondary phone. So I wanted to get a wireless receiver to go along with the Nexus 5.
Packaging
Not much to talk about here, simple box containing the unit with a small plastic wrap inside. No frills.
Build Quality
The receiving tag is very thin, I can't compare it to others but im guessing they are all comparable. I had no problems putting the back cover on. There wasn't a huge bulge were the tag is. There is a slight bump but you would really have to be trying to feel for it to notice its even there.
Performace
Using my Ravpower Qi Charger it detected the tag instantly. There wasn't any time where I had trouble with getting the S3 to start charging. It didn't get any warmer than usual when charging with a usb cable.
I have a Diztronic case on my S3 and it charged it just fine through the case. I've tried other cases such as the ZooGue case had the same results.
Conclusion
For a mere 10 bucks, its sort of a no brainer for the convenience of wireless charging. I been using it for over 2 weeks and never had a problem with it.
You MUST have a wireless charging pad. Ravpower is offering a 20% discount on the receiving tag when you buy a charging pad with it via amazon. Details is under the "special offers" in the middle of the product page.
I recommend the Ravpower Orbit
Review of the Orbit here
http://forum.xda-developers.com/showthread.php?p=50243963
http://www.amazon.com/RAVPower®-Qi-...qid=1393456590&sr=8-1&keywords=ravpower+orbit
Note: I was provided a sample for an unbiased review
Do these guys make a Qi receiver for an S3?
krash183 said:
http://www.amazon.com/RAVPower®-Wir...F8&qid=1393455689&sr=8-3&keywords=ravpower+s3
After getting my Nexus 5 and getting spoiled with wireless charging, it was quite troublesome to charge via a usb cable when using my s3 as a secondary phone. So I wanted to get a wireless receiver to go along with the Nexus 5.
Packaging
Not much to talk about here, simple box containing the unit with a small plastic wrap inside. No frills.
Build Quality
The receiving tag is very thin, I can't compare it to others but im guessing they are all comparable. I had no problems putting the back cover on. There wasn't a huge bulge were the tag is. There is a slight bump but you would really have to be trying to feel for it to notice its even there.
Performace
Using my Ravpower Qi Charger it detected the tag instantly. There wasn't any time where I had trouble with getting the S3 to start charging. It didn't get any warmer than usual when charging with a usb cable.
I have a Diztronic case on my S3 and it charged it just fine through the case. I've tried other cases such as the ZooGue case had the same results.
Conclusion
For a mere 10 bucks, its sort of a no brainer for the convenience of wireless charging. I been using it for over 2 weeks and never had a problem with it.
You MUST have a wireless charging pad. Ravpower is offering a 20% discount on the receiving tag when you buy a charging pad with it via amazon. Details is under the "special offers" in the middle of the product page.
I recommend the Ravpower Orbit
Review of the Orbit here
http://forum.xda-developers.com/showthread.php?p=50243963
http://www.amazon.com/RAVPower®-Qi-...qid=1393456590&sr=8-1&keywords=ravpower+orbit
Note: I was provided a sample for an unbiased review
Click to expand...
Click to collapse
woneil said:
Do these guys make a Qi receiver for an S3?
Click to expand...
Click to collapse
Yeah they do but apparently they sold out of the s3. I imagine it'll come back in stock soon
Sent from my Nexus 5 using Tapatalk
The best deal for a wireless charging pad is from Monster Watts, sold through Vivealive (sp). $14.99, is the WiQiQi charging pad. They charge $5 shipping, first class USPS inside the US. The pad works well. Not much to look at though, but good deal for the $$..
I'm using the RavPower reciever. It works well together. What I have found out playing around with the charger, is that if you have a poor connection between the charger & reciever, you will get the on/off cycling. I have my phone in a Seidio Active case with velcro on the back to secure the phone on the Mountek CD slot car mount I use. The extra thickness of the velcro prevents good reception & I get the cycling. If I remove the plastic frame all is good. If I remove just the velcro all is good. The screen will flash once at charge start, turn off, then flash once when battery full, then turn back off. The phone will then remain on the pad in standby with no cycling.
It all works a treat, I can't wait to get my AirDock for the car to add wireless charging there as well.
Ravpower said it'd come back in stock within a week. Also, I don't have experience with any other Qi charging base, just ravpower and they've worked great for me
I know it's lazy, but thoughts? It's 1000 mA
I've never had wireless charging before and always told myself that my next phone would have wireless charging...
Intsun® Universal QI Wireless Charging Receiver film for micro-USB of All Android Mobile (Narrow-Interface Down) by Intsun http://www.amazon.com/dp/B00JIN22JM/ref=cm_sw_r_udp_awd_dlEXtb1VYP476
Sent from my One XL using Tapatalk
That one I believe is rated as 500mA so it's going to take a long time to charge. A 750mA one is better, but it will be thicker as well and the microUSB on them are shoddy. I would like it if someone knows the exact location of the +5V and Ground solder point on the mother board, that would be the best solution.
http://www.amazon.com/Universal-Wir...TF8&colid=3OC2TRSSGA72P&coliid=I1NLS41WJ2XY3W
This one looks like the same thing. Both say "Charging current: DC 5V/500mA-1000mA" but I wouldn't expect anything over 500mA. I ordered one anyway even though my case won't be here for another week.
interesting, if it is possible to "install" it under the back cover.!?
I wonder how long the OnePlus One will take at 500mA. I ordered the same one with "500-1000". Waiting on my case to arrive so I can actually use it.
Hilbe said:
I wonder how long the OnePlus One will take at 500mA. I ordered the same one with "500-1000". Waiting on my case to arrive so I can actually use it.
Click to expand...
Click to collapse
I was going to make a thread today on this but I can confirm that most of these are actually 500mA regardless of what it says in the description. I already received the case I ordered from Amazon so I put it all together yesterday and it all plays nicely. You obviously loose the usb port but that's why I did all my rooting and unlocking first. It's plastic so it will likely not damage the usb port on the phone. I have not tested the charge time, will try today and let everyone know.
Originally I was thinking of putting the receiver behind the actual phone backing. Decided against it because you never know if you need the usb port. Also, I hate the feel of the back of the phone and much prefer the case.
If someone can identify the pins to make a direct connection, that would be great but for now it works!
funCrash93 said:
interesting, if it is possible to "install" it under the back cover.!?
Click to expand...
Click to collapse
Read my thread here about how I soldered on internally. http://forum.xda-developers.com/oneplus-one/general/internal-wireless-charging-t2819398
The one that I purchased was rebranded as 750mA, but on the original sticker under the one put over it it says it's rated for 1000mA. I have a couple of the black ones OP is talking about and they don't provide enough juice to even reliably charge the one. Check out my thread above and the link to my original post on the opo forum. I have a link to the one I purchased on ebay there that worked the best for me.
@inaudible101 - what tools did you use to remove the back cover?
At 500mA, it should take about 6 hours to charge a battery at around 5%. This assumes that you are getting the full 500mA, too, not less.
AJ RIMMER! said:
@inaudible101 - what tools did you use to remove the back cover?
At 500mA, it should take about 6 hours to charge a battery at around 5%. This assumes that you are getting the full 500mA, too, not less.
Click to expand...
Click to collapse
Yeah I tried a 500mA one and it just didn't cut it. The 1000mA one works much better. I may hook it up to my multimeter just to see what the real output is for my own sake. I used a pocket knife to get the corner up and then slid my thumb nail under and the hooks pop off easily. They have a video on their website showing that you can push on the back with your thumb and then just pry the bottom but I'm not sure how well that works.
Guys, what receiver do you have and how much does it really output? On mine it says 500 mAh but in reality it only has an average of 300 mAh. I measured this with Battery Monitor Widget.
This is my receiver: http://www.aliexpress.com/item/Univ...less-Charging-Receiver-Module/1973302276.html
Has anyone found a 1000ma version?
Is it safe to leave the receiver plugged in even if i'm not charging it, like would it damage my usb port?
Cause I just ordered one for my OPO and a wireless charger from aliexpress.
If you have bought and used a Qi receiver in your s3 for more then a week I want to hear about it.
I would like your replies to include pics of it installed in your phone. Hopeful that will keep this thread shill free.
Are they all the same level of crap?
Did yours bulge the back so bad it cracked?
Did it heat up the phone more then gaming?
Did they block NFC?
Is it slower/faster then usb?
I'm actually kinda temped to buy one of the S5 ones that are advertised as "paper thin" and modify it to fit. Some of them have pics of callipers measuring them and they look damn thin. None of the S3 ones currently on amazon or eBay look like something that won't burst into flames :/
weedy2887 said:
If you have bought and used a Qi receiver in your s3 for more then a week I want to hear about it.
I would like your replies to include pics of it installed in your phone. Hopeful that will keep this thread shill free.
Are they all the same level of crap?
Did yours bulge the back so bad it cracked?
Did it heat up the phone more then gaming?
Did they block NFC?
Is it slower/faster then usb?
I'm actually kinda temped to buy one of the S5 ones that are advertised as "paper thin" and modify it to fit. Some of them have pics of callipers measuring them and they look damn thin. None of the S3 ones currently on amazon or eBay look like something that won't burst into flames :/
Click to expand...
Click to collapse
Sorry I don't have pics. I have used one for the last year. It's been a bit of hit n miss. The quality seems to be ok as far as I can tell visually and I had bought the cheapest one I could find. I haven't had any problems with cracking of the case but it does bulge ever so slightly and any 3rd party case of tried with it doesn't have any problems with fit. The receiver is about credit card thickness. It does not block nfc on my phone. It is very much slower to charge than with regular usb, but it will charge my phone completely overnight. The problem I have with it just recently is that it doesn't consistently charge. It "loses" connection randomly. I have made sure that the contacts stay connected but still the problem persists. I'm not sure if it's hardware or software related at this point but it did use to work consistently. Also it may be the charging pad that is going funky and not the receiver itself. I have ordered a new and different charging pad that should arrive this week and I'll have a better idea of what's going on when I get it. Hope that helps a bit.
I have been using one for about two weeks now, no bulges, it overheats a bit, but I am using cm12 and boeffla kernel and have oc'ed current to 950 for faster charge so thats on me, its faster than usb atm, but a bit slower than normal charger. Didnt understand what you meant with ''blocks nfc''
The NFC coil is on the back of the battery.
These Qi stickers glue to the battery. It stands to reason one coil over the other might interfere.
Which is why I asked if you still have NFC with one installed.
I've had my S3 for a couple months now; got it as a freedompop refurb during a good sale. Came with the usb port loose and was hard to get it to charge, so I went on ebay and got a cheap qi charger (came with coil and charge plate). It was supposedly a 1000ma charging coil, though it does charge pretty fast. The charging base does heat up a bit while charging, and will heat up the phone just by proximity, but so far nothing too serious.
I don't use NFC for anything so I have no idea if it's impacted at all. There's probably other qi charging topics here with answers.
The coil barely made a dent in the backplate plastic. It is slightly visible, but it didn't impact the phone fitting in a few of the cases my friends had. I settled on a nice leather folding case that also worked as a landscape-stand.
It might be just the quality of the charge plate or the coil I received that's making this one little problem: if the phone is directly on the base (bare-plastic back to charge plate), it likes to blink in and out of charging constantly. If there's a little space though, it'll steadily charge and not blink (or very rarely blink). The gap I found to work the best is roughly the phone's normal thickness. I used a piece of cardboard and a couple gift cards to get there until I got the folding case. Folding the front over to the back provided enough space for steady charging on its own. Again, it's probably the china quality, but at least it's working well.
eyeguy616 said:
I've had my S3 for a couple months now; got it as a freedompop refurb during a good sale. Came with the usb port loose and was hard to get it to charge, so I went on ebay and got a cheap qi charger (came with coil and charge plate). It was supposedly a 1000ma charging coil, though it does charge pretty fast. The charging base does heat up a bit while charging, and will heat up the phone just by proximity, but so far nothing too serious.
I don't use NFC for anything so I have no idea if it's impacted at all. There's probably other qi charging topics here with answers.
The coil barely made a dent in the backplate plastic. It is slightly visible, but it didn't impact the phone fitting in a few of the cases my friends had. I settled on a nice leather folding case that also worked as a landscape-stand.
It might be just the quality of the charge plate or the coil I received that's making this one little problem: if the phone is directly on the base (bare-plastic back to charge plate), it likes to blink in and out of charging constantly. If there's a little space though, it'll steadily charge and not blink (or very rarely blink). The gap I found to work the best is roughly the phone's normal thickness. I used a piece of cardboard and a couple gift cards to get there until I got the folding case. Folding the front over to the back provided enough space for steady charging on its own. Again, it's probably the china quality, but at least it's working well.
Click to expand...
Click to collapse
Great idea on the spacing! Mine does basically the same thing. Never thought of moving it farther away. Sweet! But you might want to be careful if you're using gift cards that haven't been redeemed. I think, not positive, that it might ruin the magnetic strips on them.
I want to buy a magnetic charger and I live in India and very low quality cables are available on the local websites. I have looked for cables on eBay.com which ship to my location but I don't know which one to buy. I need your opinions. My maximum budget is 12$(incl. shipping).
The WSKEN Cable is available at my location. Is the cable worth buying?
Thanks in advance.
I got wsken magnetic cable, and its build quality is fine, but magnet is not that strong - its even weaker than another fake original sony cable i got. But if you just use it to charge your phone without using it, it can do the job.
I wouldnt recommend one with a very strong magnet. There have been some horror stories of the storng magnet PULLING the phones charge port completely out. I got a fairly weak one from amazon.
http://www.amazon.com/gp/product/B00UOVZOBK?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Fits perfectly with my Cruzerlite TPU case. I even have EXTRA room for clearance. Magnet isnt the strongest which makes me happy as I only charge at night when I'm sleeping as the phone lasts through the day for me.
Yup, it happened to me. I use a Magnector adaptor and it is very strong, after a while the whole connector came off as there was simply a VERY thin acrylic glue foam tape (VHB ?) holding it and keeping water off. By thin I do not mean the thickness but the actual long side surface
The good news is that the connection with the internal PCB board are spring loaded, so I put it back in place and tested it then used a needle to put some cyanoacrlylate glue to hold it, it never came out again and the phone still look ok. Now I always try to removing it with a twisting motion just in case...
It is hard for me to understand how they can claim waterproof and use such thin gasket but I still like this phone a lot!
hmm dont think I'll be getting a magnetic charger any time soon then if it comes off that easily. >_<
It's just the Magnector adapter that seems to do that. None of the others are strong enough to pull the connector off of the phone.
I just bought an OEM one from aliexpress for only $2.71 US. btw you only save .03 if you use the mobile app
http://www.aliexpress.com/store/pro...a-Z1-Charger-Adapter/1775016_32429292298.html
I also have a generic magnetic charger. The one with a circle blue LED in the part near the magnet. I found that it charges slowly compared to the OEM usb cable that came in the box. I used the same OEM charger for both tests.
Charging via magnetic cable is roughly 60-70% of the speed of normal USB charging. Is this just me that I have a low quality cable or is it really that much slower?
I tried two Magnetic cables but they don't work on my Z3 Compact because pins are not aligned with phone and charging not working probably because there is no contact. Actually i got one with LED indicator to work several times but on slightly move it stops charging and it is hard to get it to charge again so I gave up on these cables.
I bought original Sony DK48 Dock and it's working out of the box. Only issue is that I need to remove protective case before charging because with it phone won't fit in Dock. It almost fits so I'll probably try to modify larger adapter so phone can fit with case...
I received my DK48 dock and magnetic cable from Ali Express and they both work great. The charging cable ($2.71) matches the pins perfectly so doesn't appear to be a knock-off. I have a Devilcase bumper and works with the DK48 dock also with the case on--just attach the included back rest. It takes me a few times to get it aligned perfectly to charge but works.
I'm using this cheap one and it works great for me. Magnet is ok so you can even move your phone as long as the cable is parallel to your phone.
http://www.ebay.com/itm/Magnetic-Ch...39h-KK-/261850771916?var=&hash=item3cf785b1cc
I'm have WSKEN X-cable Easy Version, and it's great.
You can also try WSKEN X-CABLE DOUBLE METAL which has a charge indicator led.
Both cables charge my device faster than original Xperia Z2 charger and magnet is not too weak/too powerful.
Check WSKEN website for details.
I've tried several magnetic chargers and adapters and always facing the same problem, too weak magnet and if the phone is moved even an inch the cable falls off. Finally I got WSKEN X-CABLE for 7$ and that did the trick, everything works great including fast charging. You can literally hold your phone up in the air by the charger. And no, the magnet is not too strong as described in previous posts, with a slight pull it comes off without breaking the phones charging port. There is even a little plastic widget included to attach the cable into the right position angle and you can perfectly use the phone while charging. Link: http://www.ebay.com/itm/112026597308?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT