[Q] My phone does not boot anymore - Sony Xperia ZL

I was using the Lollipop Ressurection ROM when suddenly my phone starts to bootloop, and i have done all the methods to install Original or Original based ROM's, but it always freeze and reboot on the first boot screen. Just the CM11 was able to make the phone turn on but it doesn't recognize the SIM card. Help me please!!!

help what, all we can say is flash back to your orig backup or flash back a stock firmware.... maybe you have hardware problems, we dont even know what hardware your using, how long have you been using ressurection, what were you using before.... etc etc... you can boot into a recovery fine?

Related

[Q] HTC ONE V CDMA-Phone reboot/s

Hello,
wanted to ask for help, i have HTC ONE V CDMA version Bootloader Unlocked and Rooted. S-ON
I tried installing PrimoC kernel on stock sense. I install kernel for ICS then i reboot into bootloader flash the boot.img. Phone reboots and keeps rebooting.
I install XPERIA Rom, install stock kernel through bootloader /fastboot phone wont boot up, just keeps restarting.
I install CM10 and install kernel phone boots up and shuts down. Boots up shuts down.
PACMAN ROM same issue.
The point is what am I doing wrong? I went through every phone out there on the market never had any issues. This phone is pain in my ass.
The only way for me to boot up the phone out of boot loops is flashing BOOT.img from my back i made of the stock sense. Even then my WIFI will not work.
I am looking for pointers, instructions, whatever helps i love flashing I love these ROMS on here, but i just cant seem to get the to work.
Appreciate your time and your help.
Sounds like the last OTA update, your phone might have already had it before you bought it.
http://forum.xda-developers.com/showthread.php?t=2013489&highlight=ota
Please ask all questions in Q&A. Thread moved there.
restoring back to pre ota fixed the issue. what a pain it was something so simple yet complicated.

[Q] Bootloader Update/KitKat Update screwed up everything!

I am desperately crying for help here!
I was using cm-10.2 with twrp 2.6, data encrypted.
Now I upgraded to cm-11 and before I needed to upgrade the boot. Now:
1.) I suddenly do not have any service! What can that be? The boot upgrade or cm-11?
2.) I wanted to revert to my cm-10 nandroid upgrade. However, twrp2 always says "Password failed, Please try again". That's impossible it's the correct password! I can start the normal system with the identical password and it used to work always!
So I have a broken phone currently
Can anyone help me out?
Something similar happened to me earlier. Idk if this could be helpful.. I had a encrypted I747 and i flashed CM 10.1 on it, and phone was dead. However,I could go to download mode. So i Odin back to stock att rom. Even after odin i have problem booting because of my earlier encryption, so i factory rested in recovery. it worked for me. But i am not sure, if u have updated to 4.3 bootloader then running odin will brick ur phone.
Did you flash a compatible modem?

[Q] Flashed incorrect kernel on One M8 no screen response whatsoever

I tried flashing a kernel believed to be ExcaliBur on my HTC One M8, but as soon as i rebooted the screen was black yet still on.
I know it's not bricked completely because i can still hear sounds, feel vibrations and see the LED's work properly. Basically I have a "blind" phone. I have began to look into a way to capture my screen one frame at a time with my computer.
Please help me!
Running Android 4.4.4 Cyanogenmod Snapshot 11
T-Mobile
TWRP 2.8.0.3
Tried getting back to bootloader and flashing back the boot.img you had before flashing new kernel?
If the device still has "some" interaction then you should be able to connect it to PC and use the adb reboot bootloader command to boot it into bootloader.
BerndM14 said:
Tried getting back to bootloader and flashing back the boot.img you had before flashing new kernel?
If the device still has "some" interaction then you should be able to connect it to PC and use the adb reboot bootloader command to boot it into bootloader.
Click to expand...
Click to collapse
I actually DID just get into my bootloader. I had to mess around by pressing the buttons until i finally got it to boot into bootloader. Now I flashed a stock kernel for now, I always keep it in my SD Card.
I found you can use a program called Wondershare MobileGo for Android that can read whatever is on your phone if you happen to be "blind" like me.
P.S. I really need a kernel for CMod that has fast charge. Currently ExcaliBur is off the list.
I haven't heard of Wondershare MobileGo, seems interesting.
I can't help with custom Kernels, I always stick with stock, haven't flashed a custom kernel since way back with my S3. Sorry, can't help there.
Thanks anyways! Notice I got my phone working again! I flashed the stock, and then reflashed CMod and nothing was wiped. Interestingly...
Sent from my One M8 using XDA Free mobile app
That's quite lucky, any other time I've heard of this happening the phone's died completely.

Android A1(AQ4501) Dead :(

I own a canvas A1 4GB variant, I had rooted my phone and flashed custom recovery(everything was finee), After a while my phone's battery started giving me problems(lasted only few hours), I considered flashing Stock ROM or any other trusted ROM, I had flashed RR M[07/07] based on android MM, The battery was still giving problem, A week later, My mom's phone broke and she had to use this(A1) temporarily, I formatted everything and thought of flashing stock ROM and handing over the phone to her, I tried flashing the official zip via TWRP, It gave me some error regarding unable to mount system, System partions or something(I don't remember). And after that, I could't flash any ROM, I tweaked some settings in TWRP and now my phone is totally dead, It does not boot up at all, No recovery mode turns on, Nothing except a black dead screen, I tried flashing stock firmware via SP flash tool, It completes and says successful but still nothing happens, Just wanna know if something can happen to this one? I really loved that device and would be great to have it back working.
Flash correct stock firmware in sptools
arunassain said:
Flash correct stock firmware in sptools
Click to expand...
Click to collapse
doesn't work. I have tried various STOCK Roms on mine but didnt work. Please post a link if possible which u think works.

Maybe Brick me N7100

Hello,
I have i problems with my N7100.
I can't boot the phone after flash Hybrid Kernel 9.0.3
https://forum.xda-developers.com/galaxy-note-2/development/kernel-t3732155
I have try to install N7100XXDLJ2_OXA_FACTORY to recover me phone but i have a red message in download mode.
I think is because i try to downgrade the bootloader.
I have try to flash N7100XXSFQA7_N7100OXAFOC2_N7100XXUFNG1_HOME.tar.md5
When odin finish, the phone reboot and the phone boot
I can see the samsung logo
When the phone ask for pin, the phone reboot.
And now the phone stick on N7100 logo
Can you help me ?
Thank you
Did you perform a factory reset from stock recovery after flashing the latest stock ROM?
Hello, i fix it, after many flash, stock, custom ....
I can't explain, but when i boot on me OEM battery the phone boot loot.
I install a new battery inside and my phone work very well.
evilpacer said:
Hello, i fix it, after many flash, stock, custom ....
I can't explain, but when i boot on me OEM battery the phone boot loot.
I install a new battery inside and my phone work very well.
Click to expand...
Click to collapse
I always hear about this alot that battery was the problem but i am always thinking why, Whats the connection between them.

Categories

Resources