Develop Bugs

ADB device offline - after upgrading TWRP and 4.2 ?

So I have had my Galaxy Nexus since the day it came out, I rooted it before I even activated it.
Like many, I have used all sorts of different ROMs over the year period.
I have never had any problems with adb or anything. I have pushed and pulled files and all of that numerous times.
Until yesterday, I finally upgraded my recovery from an really old (first touch based recovery) to the newest TWRP. It worked fine. I put my phone into fastboot mode, and was able to flash the new recovery through the command prompt (adb/fastboot) on my PC. Then I switched to a new 4.2 rom (Paranoid android 2.99)
So today, I wanted to try some editing on some system files, so I went to go pull some files off of the phone (using adb of course), but now it just tells me that my device is offline.
I tried
"adb kill-server"
"adb start-server"
"adb devices"
It lists my device number, but just says "offline"
I tried to update everything. (Samsung main Drivers - Google's USB SDK drivers - and the newest version of android-sdk)
Also made sure that my USB-debugging was set on my phone.
Even if I put my phone in fastboot mode, it doesn't recognize it anymore. Which is weird because just last night it worked perfectly fine when I upgraded my recovery. I am frustrated to no end...... Can anyone else tell me what I might be missing here?

Nobody?

hxdrummerxc said:
So I have had my Galaxy Nexus since the day it came out, I rooted it before I even activated it.
Like many, I have used all sorts of different ROMs over the year period.
I have never had any problems with adb or anything. I have pushed and pulled files and all of that numerous times.
Until yesterday, I finally upgraded my recovery from an really old (first touch based recovery) to the newest TWRP. It worked fine. I put my phone into fastboot mode, and was able to flash the new recovery through the command prompt (adb/fastboot) on my PC. Then I switched to a new 4.2 rom (Paranoid android 2.99)
So today, I wanted to try some editing on some system files, so I went to go pull some files off of the phone (using adb of course), but now it just tells me that my device is offline.
I tried
"adb kill-server"
"adb start-server"
"adb devices"
It lists my device number, but just says "offline"
I tried to update everything. (Samsung main Drivers - Google's USB SDK drivers - and the newest version of android-sdk)
Also made sure that my USB-debugging was set on my phone.
Even if I put my phone in fastboot mode, it doesn't recognize it anymore. Which is weird because just last night it worked perfectly fine when I upgraded my recovery. I am frustrated to no end...... Can anyone else tell me what I might be missing here?
Click to expand...
Click to collapse
hxdrummerxc said:
Nobody?
Click to expand...
Click to collapse
only thing i can think of right now, before suggesting omap flash or odin, would be try a different usb port, another computer, another OS!

try installing the latest CWM recovery and see if it helps.

hxdrummerxc said:
So I have had my Galaxy Nexus since the day it came out, I rooted it before I even activated it.
Like many, I have used all sorts of different ROMs over the year period.
I have never had any problems with adb or anything. I have pushed and pulled files and all of that numerous times.
Until yesterday, I finally upgraded my recovery from an really old (first touch based recovery) to the newest TWRP. It worked fine. I put my phone into fastboot mode, and was able to flash the new recovery through the command prompt (adb/fastboot) on my PC. Then I switched to a new 4.2 rom (Paranoid android 2.99)
So today, I wanted to try some editing on some system files, so I went to go pull some files off of the phone (using adb of course), but now it just tells me that my device is offline.
I tried
"adb kill-server"
"adb start-server"
"adb devices"
It lists my device number, but just says "offline"
I tried to update everything. (Samsung main Drivers - Google's USB SDK drivers - and the newest version of android-sdk)
Also made sure that my USB-debugging was set on my phone.
Even if I put my phone in fastboot mode, it doesn't recognize it anymore. Which is weird because just last night it worked perfectly fine when I upgraded my recovery. I am frustrated to no end...... Can anyone else tell me what I might be missing here?
Click to expand...
Click to collapse
Try going to settings and look for something related to Root Access and it would have three options:
1. Apps only
2. ADB only
3. Apps & ADB
Choose the 3rd.
You might have to hunt the exact location under Settings where this option will be available as I don't remember them exactly.
Hit Thanks, if this helps...

I looked, but I don't see those settings anywhere.
I tried multiple USB port's. Switching from my USB 3.0 ports to my 2.0 ports. nothing. I can still access the phone storage. So I know it is still connecting to the PC. I could try to boot up linux, but I don't have any of the driver's and sdk tools on my linux drive, and from what I heard it was hard to get it all running in linux.
I guess I could try to change recoveries from TWRP to the newest CWMR,
but last time I turned my phone off, put it in fastboot mode, adb didn't recognize it. So im assuming it won't let me flash anything. Unless fastboot sees it but adb doesn't?
I mean my phone is working perfectly fine, running the new recovery and rom. But I have to be able to connect to adb. Not only for modding but in case of an emergency where I would need to flash.

hxdrummerxc said:
I looked, but I don't see those settings anywhere.
I tried multiple USB port's. Switching from my USB 3.0 ports to my 2.0 ports. nothing. I can still access the phone storage. So I know it is still connecting to the PC. I could try to boot up linux, but I don't have any of the driver's and sdk tools on my linux drive, and from what I heard it was hard to get it all running in linux.
I guess I could try to change recoveries from TWRP to the newest CWMR,
but last time I turned my phone off, put it in fastboot mode, adb didn't recognize it. So im assuming it won't let me flash anything. Unless fastboot sees it but adb doesn't?
I mean my phone is working perfectly fine, running the new recovery and rom. But I have to be able to connect to adb. Not only for modding but in case of an emergency where I would need to flash.
Click to expand...
Click to collapse
I understand your situation... Since you were not able to locate the option suggested, a little Googling answered it's location, check for same and confirm:
Settings > developer options > root access > apps and adb
This should hopefully help resolve the issue.
Hit Thanks, if it helps.

freezer2000 said:
I understand your situation... Since you were not able to locate the option suggested, a little Googling answered it's location, check for same and confirm:
Settings > developer options > root access > apps and adb
This should hopefully help resolve the issue.
Hit Thanks, if it helps.
Click to expand...
Click to collapse
hi. i try all this ways. i know that my usb debuging have problem, in development option i'll checked this, and it says enable. but infact it's not enable and still i got device offline error.
also i use z4root app and when i touch on root, it says that rooting need usb debuging enable (please enable it)!!
then move me to development setting to enable that, but this was checked and enable.
is any way that we make device online from my phone? for example using terminal emulator to turn on usb debuging or turn it off. this way is only my way! any one know some trying this?
i also use usb debugger app, but it move me in settings too! LOL
i need enable my device to root that.
thanks every one

I know this is an old topic, but if somebody else googles it, I had that offline issue, the solution was to upgrade adb : http://stackoverflow.com/questions/10680417/error-device-offline

You simply need to upgrade to the latest version of adb. Went thru this a few weeks ago.

[Q] Can Not get ADB and Fastboot drivers to install

Windows 7 x64
Galaxy Nexus i515, BROKEN SCREEN, USB DEBUGGING WAS NOT TURNED ON. The phone is completely stock I just turned it on and used it until I broke my screen. Screen lock is on.
I have been trying to access my phone, using Fastboot, to wipe it before I send it in for warranty. I can not seem to do this at all. It seems that I can not install the drivers because I have not enabled USB debugging. Is this true? I have been following this guide : http://www.teamandroid.com/2012/07/30/how-to-set-up-adb-fastboot-with-android-sdk/2/ When i go to manually install the drivers, from SDK, I get, "The folder you specified does not contain a compatible software driver for your device. If the folder contains a driver, make sure that it is designed to work with Windows for x6-based systems." I then tried the driver from Samsung and got the same response.
So then I hold VOL+ _ VOL- and Power and tried to install the drivers for Fastboot with the same outcome as above. Also when I boot in Fastboot mode the drivers that are installed make my phone a modem. The driver is called, "SAMSUNG Mobile USB Modem." I can not get this to change.
So to summarize I can not get the ADB Drivers to install, because I do not have USB Debugging enabled, that in return will not allow me to install Fastboot Drivers because when I plug the phone in the computer sees it as a Modem.
Any suggestions? I am just trying to erase the info on my phone I have given up all hope of recovering any data.
Thanks,
qualm

USB debugging drivers/interface have nothing to do with fastboot drivers/interface. What's a screen lock?
a manta wrote this.

beekay201 said:
USB debugging drivers/interface have nothing to do with fastboot drivers/interface. What's a screen lock?
a manta wrote this.
Click to expand...
Click to collapse
I meant a screen pattern lock. When you wake up the screen you have to connect the dots in a certain pattern before your screen unlocks and you can use the phone.
As far as, USB debugging drivers/interface having nothing to do with fastboot drivers/interface, then what am I doing wrong? I can not get my computer to see my phone as an android device.

_qualm_ said:
I meant a screen pattern lock. When you wake up the screen you have to connect the dots in a certain pattern before your screen unlocks and you can use the phone.
As far as, USB debugging drivers/interface having nothing to do with fastboot drivers/interface, then what am I doing wrong? I can not get my computer to see my phone as an android device.
Click to expand...
Click to collapse
I know what a screen pattern lock is.
Uninstall all drivers, reboot pc.
Assuming device is off: press power+vol up+vol down, until you feel the vibration. Wait 2 secs or so. Device will be in fastboot mode.
Read this thread, i say again, READ this thread, obviously start with the first post! - http://forum.xda-developers.com/showthread.php?t=1812959

Thanks for the link. I read it and followed instructions for installing the drivers. Here is what I did:
1.Uninstalled all drivers
2.Rebooted my PC
3.Downloaded these Drivers, as suggested: http://forum.xda-developers.com/showthread.php?t=1379875
4.Followed these instructions, on how to install the driver without windows trying to find one automatically: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735
Everything seemed to go well under the Device Manager, when I plug my phone in in fastboot mode, it shows Android Phone -> Samsung Android Interface. This is way better than what I had before, when it was showing up as a Modem. Now when I try to use fastboot.exe and I type "fastboot devices" nothing shows up. I reset the computer and replugged in my device, in fastboot, and the same thing nothing shows up in fastboot.
Thanks for you help.

Did you miss the part about having to feed windows the same driver again, when connecting the device for the first time, in FASTBOOT MODE?
a maguro wrote this.

beekay201 said:
Did you miss the part about having to feed windows the same driver again, when connecting the device for the first time, in FASTBOOT MODE?
a maguro wrote this.
Click to expand...
Click to collapse
Not sure if I understand what your asking.
I followed all of the steps here: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735 I connected the phone booted normally and let windows find a driver so that the driver reads Portable Devices -> Galaxy Nexus. Then I unplugged the Nexus and booted it in fastboot mode and plugged it in. Next I followed the directions to install the Universal_Naked_Driver, in fastboot mode. I can not install the driver for ADB because I can not enable USB Debugging with my broken screen.
Thanks Again.

Why is it so difficult for people to understand that USB debugging has nothing to do with anything outside the booted OS?
Sent from my Galaxy Nexus

W8 a sec, do you even have your bootloader unlocked???
You said you're running stock, so that should have been my first question, because to unlock your bootloader through the usual way, you need to confirm a dialog on the device... which in your case, doesn't have a working screen.
_qualm_ said:
Not sure if I understand what your asking.
I followed all of the steps here: http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735 I connected the phone booted normally and let windows find a driver so that the driver reads Portable Devices -> Galaxy Nexus. Then I unplugged the Nexus and booted it in fastboot mode and plugged it in. Next I followed the directions to install the Universal_Naked_Driver, in fastboot mode. I can not install the driver for ADB because I can not enable USB Debugging with my broken screen.
Thanks Again.
Click to expand...
Click to collapse
....
Lets see:
That post shows how it's done, correctly. (I think, from what i've read)
pay attention to part 3)
3)
NOTE:
- The method described here can be used to install the "Samsung Galaxy Nexus ADB Interface" driver as well as the "Samsung Galaxy Nexus Bootloader Interface" driver.
- Differences between the two procedures. One is done with the phone booted up normally and "USB Debugging" is enabled, and the other is done when the phone is in fastboot. I will cover the "USB Debugging" part here.
Click to expand...
Click to collapse
then...
We will now install the two drivers that efrant talked about in his post.
A) (FOR ADB - WHEN RUNNING ANDROID OS):
Enable USB debugging on your device
- Goto Settings > Developer Options > Check "USB Debugging"
- Connect device, manually update driver to Naked driver by 1wayjohny, done. On 4.2 and above, you'll need to confirm that you accept the host's (your pc) RSA key.
B) (FOR FASTBOOT - WHEN RUNNING FASTBOOT MODE)
boot into fastboot mode - power off phone and hold vol up + vol down + power
Click to expand...
Click to collapse
Both for A) and B), you need to do the "Update drivers manually" part!
Right now, your only option is B), that is to use fastboot to either:
- Flash stock images.
- To get your data back, boot a custom recovery (which won't require the RSA key confirmation for ADB) from fastboot, then use ADB to pull your /sdcard/ or whatever.

Pirateghost said:
Why is it so difficult for people to understand that USB debugging has nothing to do with anything outside the booted OS?
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I am learning this ^. I am having trouble getting my computer to see my phone, in fastboot mode. All of the instructions that I have read start with installing drivers for ADB, which requires the phone to be USB debugging mode, and then the drivers for fastboot. So I thought my trouble was, since I can not install the drivers for ADB, and that I was having trouble with all of my drivers, that it was probably the fact that my phone can not be put into USB debugging mode. I now realize that USB debugging has nothing to do with fastboot, as fastboot is before the OS is booted. I am still just having trouble with my fastboot driver and seeing my phone with fastboot.exe.

beekay201 said:
W8 a sec, do you even have your bootloader unlocked???
Both for A) and B), you need to do the "Update drivers manually" part!
Right now, your only option is B), that is to use fastboot to either:
- Flash stock images.
- To get your data back, boot a custom recovery (which won't require the RSA key confirmation for ADB) from fastboot, then use ADB to pull your /sdcard/ or whatever.
Click to expand...
Click to collapse
No my bootloader is not unlocked. Is this the reason that my phone is not detected by fastboot.exe? Do I need to unlock my bootloader?
I have been trying option B, as I know this is my only option. I have been doing the "Update drivers manually" part I even tried on another PC with windows 7, to no avail. What ever I seem to do I can not see my device in fastboot.exe.

_qualm_ said:
No my bootloader is not unlocked. Is this the reason that my phone is not detected by fastboot.exe? Do I need to unlock my bootloader?
I have been trying option B, as I know this is my only option. I have been doing the "Update drivers manually" part I even tried on another PC with windows 7, to no avail. What ever I seem to do I can not see my device in fastboot.exe.
Click to expand...
Click to collapse
No. Fastboot should be able to see your device if the proper drivers are installed. Fastboot is REQUIRED to unlock the bootloader
Sent from my Galaxy Nexus

Pirateghost said:
No. Fastboot should be able to see your device if the proper drivers are installed. Fastboot is REQUIRED to unlock the bootloader
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
If you used odin to flash something, that will unlock the bootloader. Flashing a section of edited param using OMAP flash will also unlock the bootloader.
Beamed from my Maguro.

I also have the same problem with my galaxy C5.
_qualm_ said:
No my bootloader is not unlocked. Is this the reason that my phone is not detected by fastboot.exe? Do I need to unlock my bootloader?
I have been trying option B, as I know this is my only option. I have been doing the "Update drivers manually" part I even tried on another PC with windows 7, to no avail. What ever I seem to do I can not see my device in fastboot.exe.
Click to expand...
Click to collapse
My galaxy C5 is also not recognized as a bootloader interface while in fastboot mode, after installing all the drivers correctly. Samsung usb driver v1.5.63.0 makes the changes i think, and it makes it as a modem instead of bootloader. maybe the solution is i have to manually update the driver of that modem into bootloader, right click on the modem in device manager and change it's driver into bootloader of your phone, maybe it works. I will try it this way.
Let me know if this solution has worked for someone.
Thanks

Trying to restore after wipe, but ADB is not enabled

I unlocked, and rooted my nexus 7 using the Nexus Root Toolkit.
Everything was good until, after a few days, I tried turning on my device but got stuck on the "X" loading screen. After googling for a bit, I figured a factory reset would do the trick. I tried to factory reset the device in TWRP, but was confused by the two buttons and accidentally wiped everything (in adv wipe with everything checked).
Now the next problem is that I don't have USB debugging enabled (I recall turning it off for some reason). When i run "adb devices", nothing comes up and so i can't push anything to the device (and everything is wiped). Is there a command i can run, or file i can edit while in TWRP recovery mode to enable it? It seems i can't do anything without it enabled.

I did the same thing. This will help you get back to square one.
http://forum.xda-developers.com/showthread.php?t=2382618
Sent from my Nexus 7 using Tapatalk 2

poootythang said:
Now the next problem is that I don't have USB debugging enabled (I recall turning it off for some reason). When i run "adb devices", nothing comes up and so i can't push anything to the device (and everything is wiped). Is there a command i can run, or file i can edit while in TWRP recovery mode to enable it? It seems i can't do anything without it enabled.
Click to expand...
Click to collapse
Regarding how to most quickly get you back up and running, it is probably easier to just flash the stock images as mentioned above.
Regarding your adb issue, if you can boot into TWRP and are using a known good USB 2.0 port (sometimes 3.0 gives issues), then adb should already be running (ie what usb debugging enables is running)
You probably don't have drivers installed for adb running under recovery. The regular drivers don't work.
See this post:
http://forum.xda-developers.com/showthread.php?t=2391236

The ADB drivers from SDK is only for when in Bootloader and booted into ROM for needing USB Debugging. This is the driver you need in addition to what you have you've already installed to use ADB while in recovery otherwise you will see "Flo" under Unknown Devices in your computer Device Manager.

Thank you everyone. The new drivers and restore guide worked perfectly.

[Issue] Nexus 7 2013 Cm installed ADB & USB Debug problem

Hello, as topic title, I have some issues with my nexus 7 2013 wifi model.
I installed official cyanogenmod 10.2. I would like to restore factory image, but i have some serious issues with adb drivers while usb debug is on.
I installed official google adb drivers, drivers from nexus root toolkit (not all toghether), but when i connect my nexus 7 to my pc (running windows 8 64 pro) there is no way to make him recognize my nexus, and all adb commands fail.
If I disable usb debugging and activate mtp, my pc recognizes the nexus 7, but still can't see the nexus itself in 'my computer'.
i need some help please.

You only need fastboot to flash the stock system images.

that does not completely solve my problem

19-2000 said:
that does not completely solve my problem
Click to expand...
Click to collapse
Restore the stock ROM to see if USB Debugging and ADB is working correctly.

19-2000 said:
If I disable usb debugging and activate mtp, my pc recognizes the nexus 7, but still can't see the nexus itself in 'my computer'.
i need some help please.
Click to expand...
Click to collapse
Are you saying your issue is you want adb and mtp to work at the same time and you have them working individually or are you saying you want to restore to factory images? If the latter, the previous poster already gave you the info you need.
Just boot into bootloader using Power Down, then press/hold Power+VolDown

sfhub said:
Are you saying your issue is you want adb and mtp to work at the same time and you have them working individually or are you saying you want to restore to factory images? If the latter, the previous poster already gave you the info you need.
Just boot into bootloader using Power Down, then press/hold Power+VolDown
Click to expand...
Click to collapse
no, not at the same time.
no, not just only to restore factory image
i need debug usb to push updated recovery
i need /would like mtp to access nexus storage for moviing things from/to pc without syncing via dropbox / transfering via usb otg because is a pain in the ass

ADB don't work in Fastboot mode.

I am trying to root my Redmi Note 8. When the phone is on, adb works perfectly and recognise the device. I can even reboot device when the phone is unlocked. But once I go into Fastboot/Recovery mode then ADB fails to find the device and no commands work(.To the best of my knowledge, I have all the necessary drivers. I have tried multiple USB slots, multiple computers (Windows 7 sp1 and Windows 10 latest update), and have searched all around the internet and various forums on XDA for an answer. I've tried manually updating the USB drivers through device manager, installed universal usb driver, but that did nothing. What I don't understand is that how ADB works when the device is on but don't work when it's in Recovery/Fastboot mode. I would have post images to clear things but the site is not letting me to post images
tldr: adb recognize phone when it's on but Adb don't work in fastboot/recovery mode
Thanks in advance for any help, I've tried everything I can think of.

Replace adb by fastboot in fastboot mode
ex instead of
adb reboot
type
fastboot reboot

You've to use the fastboot command instead of adb. Please note that fastboot doesn't have all adb features, e.g. install, shell, etc

[email protected] said:
I am trying to root my Redmi Note 8. When the phone is on, adb works perfectly and recognise the device. I can even reboot device when the phone is unlocked. But once I go into Fastboot/Recovery mode then ADB fails to find the device and no commands work(.To the best of my knowledge, I have all the necessary drivers. I have tried multiple USB slots, multiple computers (Windows 7 sp1 and Windows 10 latest update), and have searched all around the internet and various forums on XDA for an answer. I've tried manually updating the USB drivers through device manager, installed universal usb driver, but that did nothing. What I don't understand is that how ADB works when the device is on but don't work when it's in Recovery/Fastboot mode. I would have post images to clear things but the site is not letting me to post images
tldr: adb recognize phone when it's on but Adb don't work in fastboot/recovery mode
Thanks in advance for any help, I've tried everything I can think of.
Click to expand...
Click to collapse
adb commands only work when phone is turned on and connected to pc using ADB.. it wont work n fastboot mode. In fastboot mode the command is fastboot.
example:
in adb-> adb devices
in fastboot-> fastboot devices