Hi,
I flashed stock rom to fix booting error and in order to install cwm but I end up kinda soft bricking my phone. I am on 4.1.2 now which is working fine but I can't access recovery just black screen with led changing lights continuously. I tried again flash it with tot file but now it is not picking driver in download mode which I forcibly installed to LGE Android Platform USB serial which installed correctly but when I change its port to 41 it gives error that port is in use but still I forcibly set it. Now when I start flashing firmware with LG Flash tool it stuck at ready and cannot pick the phone.
I have tried every possible way but I don't any solution.
Anyone put some light on this issue ?
Thanks in advance.
When I flash using flash tool, it always gets stuck at ready. Unplug the phone and back in immediately. Always works for me. I've gotten the port 41 error before also. I just ignored it.
---------- Post added at 02:52 AM ---------- Previous post was at 02:51 AM ----------
Also, don't turn phone off. When you're at download mode on phone and PC says ready, just unplug phone leaving it in download mode, then plug it back in.
I tried it again but no luck, can you confirm me one thing by checking, in download mode can you tell me full name of device driver in device manager under ports and under universal serial bus controller.
I am asking because when I installed forcibly there were 3 drivers though I tried all of them but no luck.
Currently I am on
LGE Android Platform Composite USB Device
and under ports
LGE Android Platform USB serial Port(COM 41)
buynsell said:
I tried it again but no luck, can you confirm me one thing by checking, in download mode can you tell me full name of device driver in device manager under ports and under universal serial bus controller.
I am asking because when I installed forcibly there were 3 drivers though I tried all of them but no luck.
Currently I am on
LGE Android Platform Composite USB Device
and under ports
LGE Android Platform USB serial Port(COM 41)
Click to expand...
Click to collapse
Uninstall all drivers, pc suite whatever you have installed and use this one:
LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3
Related
hey everyone,
first of all this is my first post and im new to this so please bear with me
I just bought a T-Mobile SGH-T889 Samsung Galaxy Note II running on Android 4.1.1 with build # JRO03C.T889UVALJ1
I am having some troubles connecting my phone to my computer via the the included usb cable
whenever I connect try to connect my phone to the computer, it would search for updates to install drivers but it would always say that the driver software was not installed due to no drivers found. from what I understand, they should be Samsung drivers but for some reason, mine says:
Qualcomm CDMA Technologies MSM X No driver found
Qualcomm CDMA Technologies MSM X No driver found
I did several searches on the forums but have yet to find a solution or driver for my phone. please help!
I have looked into this thread but the driver provided for the root kit is for Samsung V 1.5.9.0
Thanks!
Welcome to the forum!
I'd say to try uninstalling any Samsung drivers from your pc, then restart it. Go to the Samsung site and download the latest USB drivers. The ones provided in the kit usually work, and I'm not sure the ones on the site are any newer.
Once that is done, if you are still having problems, try a different USB cable.
Sent from my SGH-T889 using xda app-developers app
I had similar issues all I did was Change to another USB port.
Also I did a complete shutdown of the PC & phone not just a reboot.
thanks for the quick replies
I have tried several times or rebooting both the phone and the computer after installing the drivers but to no avail...
I have also tried changing to all the different usb ports on my computer but still no luck
I will try to find another cable in the house to see if that will work.
Will the samsung usb drivers work though? because i have tried those several times, the ones from the root kit as well as the ones from the samsung website but it still doesnt detect it. Are there qualcomm drivers available?
some other information that I forgot to mention earlier, I am running Windows 7 64-bit
sometimes when I connect the phone to the pc, it would load up this driver --> Qualcomm HS-USB Modem 9004 Driver
but then when i disconnect it, it wont detect it again...
a solution im thinking is maybe i should reset the phone to factory default settings? would that help?
For whatever reason, your pc is not recognizing the phone correctly. Can I ask, have you installed drivers for another phone on that pc in the past? What flavor of Windows are you running? Are you up-to-date? Have you tried disabling your firewall temporarily? Finally, try booting up in safe-mode and connecting the phone. That should let you see what it thinks your phone is when no drivers are installed.
Sent from my SGH-T889 using xda app-developers app
I had a Blackberry before but I had already removed all the software and drivers for it before getting the note 2 and I am currently running Windows 7 Home Premium 64-bit and they are up to date. I will try disabling my firewall and safe mode once i get home.
I re-read the tool-kit instructions and noticed i missed something. Am I supposed to put the phone into download or recovery mode before connecting the USB to the computer (after installing the USB drivers)?
I will have to try that once i get home as well... but I still dont understand why it shows up as qualcomm drivers instead of Samsung drivers
anyways thanks for the suggestions I will let you know how it turns out.
This problem is likely due to Samsung's USB cable, as noted in other threads.
Change the usb cable before trying anything else....
ok so i got the drivers to install finally...what i did was boot the phone in to download mode then connect the phone to my computer via usb cable and it worked...but for some reason it doesnt detect it when i launch the rootkit it does not detect my serial number
If i restart my phone normally, and then try to detect the phone again on the computer it will not detect it and goes back to saying the qualcomm CDMA technologies MSM is missing drivers again...
So the only way for it to detect the drivers is in download mode but i cant seem to get the rootkit to detect my phones serial number
1ns0mn1a said:
ok so i got the drivers to install finally...what i did was boot the phone in to download mode then connect the phone to my computer via usb cable and it worked...but for some reason it doesnt detect it when i launch the rootkit it does not detect my serial number
If i restart my phone normally, and then try to detect the phone again on the computer it will not detect it and goes back to saying the qualcomm CDMA technologies MSM is missing drivers again...
So the only way for it to detect the drivers is in download mode but i cant seem to get the rootkit to detect my phones serial number
Click to expand...
Click to collapse
EDIT: another question...so once i have the drivers installed, am i supposed to reboot the phone back normally (not download mode) for it to detect the serial number?
Hi,
I think I mistakenly flashing the Fastboot partition with all wrong version of Boot, Recovey and the rest of other partition.
Now phone is only turn with BLANK BLACK SCREEN, but USB Connection still active with COM assigned at port 41 (saw under device manager).
Anyone have idea how to flash it back to work, please .....
mKHMER
mkhmer said:
Hi,
I think I mistakenly flashing the Fastboot partition with all wrong version of Boot, Recovey and the rest of other partition.
Now phone is only turn with BLANK BLACK SCREEN, but USB Connection still active with COM assigned at port 41 (saw under device manager).
Anyone have idea how to flash it back to work, please .....
mKHMER
Click to expand...
Click to collapse
Search for latest stock rom 29 at the end of version number download an unzip to desktop.
Flash in Flashtool,at first take battery out and and flash only the bootloader uncheck everithing else !!!,when finisht disconect phone ,put battery in ,now in flashtool flash whole rom
Does your PC recognize your phone as Qualcomm HS-USB QDLoader 9008 or something else?
ludoke said:
Search for latest stock rom 29 at the end of version number download an unzip to desktop.
Flash in Flashtool,at first take battery out and and flash only the bootloader uncheck everithing else !!!,when finisht disconect phone ,put battery in ,now in flashtool flash whole rom
Click to expand...
Click to collapse
It dosn't recognize my USB driver, is there any driver needed to manually install? but if we put the battery it does [LGE AndroidNET COMx]
mkhmer said:
It dosn't recognize my USB driver, is there any driver needed to manually install? but if we put the battery it does [LGE AndroidNET COMx]
Click to expand...
Click to collapse
If PC doesn't recognize your device as Qualcomm HS-USB QDLoader 9008, you need to JTAG your device, or short pin.
Information about short pin;
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
That look like we need to work direct on mainboard of the phone? anyway withou touching inside the phone?
mkhmer said:
That look like we need to work direct on mainboard of the phone? anyway withou touching inside the phone?
Click to expand...
Click to collapse
You have to disassembly your device.
My LG G3 is not recognised as stated above but as Android device LGE MOBILE ADB INTERFACE and i have no issues on Win 10.
The phone is also imidiatly detected by LG Pc Suite
ludoke said:
My LG G3 is not recognised as stated above but as Android device LGE MOBILE ADB INTERFACE and i have no issues on Win 10.
The phone is also imidiatly detected by LG Pc Suite
Click to expand...
Click to collapse
But when I remove the back cover, I see another stainless steel cover on those chip/board, how to remove it? Too risky!
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359/page8#post63750296
Here is a brioef guide i am also facing that issue from alst five days.. hope some master help to solve that situation
HELP!
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/sprint-lg-g3/general/guide-how-to-restore-sprint-lg-g3-ls990-t2852042
ExtremeD722 said:
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/spr...de-how-to-restore-sprint-lg-g3-ls990-t2852042
Click to expand...
Click to collapse
Your computer recognize any serial port when you connect g3
[email protected] said:
Your computer recognize any serial port when you connect g3
Click to expand...
Click to collapse
Computer doesn't recognize anything... I tried all 4 ports (2 ports 3.0, 2 ports 2.0), with original cable and non-original(Sony) cable.
ExtremeD722 said:
I tried all 4 ports (2 ports 3.0, 2 ports 2.0), with original cable and non-original(Sony) cable.
Click to expand...
Click to collapse
I mean any responce in pc device manager when u connect ur mbl
[email protected] said:
I mean any responce in pc device manager when u connect ur mbl
Click to expand...
Click to collapse
No, device manager detects nothing. I have windows 10 (i tried in normal mode and test mode). And if I connect my G3 Beat computer crashes because of LG driver.( I tried different versions of LG drivers and always the same crash(error)).
ExtremeD722 said:
No, device manager detects nothing. I have windows 10 (i tried in normal mode and test mode). And if I connect my G3 Beat computer crashes because of LG driver.( I tried different versions of LG drivers and always the same crash(error)).
Click to expand...
Click to collapse
I think crashing driver due to window .Try to connect ur device at window 7 .Hope device manager show serial port or qhbulk.I was have same problem my g3 but i resolve by short wire method.Good luck
---------- Post added at 03:01 PM ---------- Previous post was at 02:53 PM ----------
ExtremeD722 said:
Soooo... I have LG G3 D855 32GB, i think i installed wrong version of TWRP recovery (for another phone). Phone is not charging, so battery is dead. NO boot, NO recovery and NO download mode. PC does not recognize phone with LG drivers and QDLoader USB driver installed. I already do a "short pin" and nothing changes at all. I am out of solutions, please help me.
I already tried:
https://www.reddit.com/r/LGG3/comments/41wbo3/how_to_unhardbrick_your_lg_g3_jtag/
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
http://forum.xda-developers.com/sprint-lg-g3/general/guide-how-to-restore-sprint-lg-g3-ls990-t2852042
Click to expand...
Click to collapse
Bro firt change ur window then install ur variant driver and qhbulk driver.After that if device manager show qhsub bulk port or something like then all problem will solve.If ur device manager show only lge serial port then use short wire method.:good:
[email protected] said:
I think crashing driver due to window .Try to connect ur device at window 7 .Hope device manager show serial port or qhbulk.I was have same problem my g3 but i resolve by short wire method.Good luck
Click to expand...
Click to collapse
I will try with other computers, but i have on all 3 computers win10...
Thx for respond !
ExtremeD722 said:
I will try with other computers, but i have on all 3 computers win10...
Thx for respond !
Click to expand...
Click to collapse
Then u should install window 7 because qhsub bulk will not dect on window 10.
---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------
Bro when u install window 7 reply me if u get any issue.Be careful when u use short wire method because due to this method my g3 baseband and imei are unknow
[email protected] said:
Then u should install window 7 because qhsub bulk will not dect on window 10.
---------- Post added at 04:11 PM ---------- Previous post was at 04:07 PM ----------
Bro when u install window 7 reply me if u get any issue.Be careful when u use short wire method because due to this method my g3 baseband and imei are unknow
Click to expand...
Click to collapse
I will reply u soon. Why do u even need baseband and imei ?
Because my baseband. Unknown and imei is null
Okay so before anyone says this has been solved before it hasn't, I have scoured the internet left and right and I have not found any way to fix this problem. Also just as a pre FYI it's not just the LG G3, it's also happening with my work provided Samsung Galaxy S5 and my girlfriend's S7.
So here we go, no matter what I have tried or pulled off, I cannot get my new (old) laptop to recognize any device I plug into any of its 5 USB ports (3 USB 3.0, 2 USB 2.0, 1 USB 3.0 enabled with Super Charger), now as for the details, the laptop has windows 10 installed and to be more specific it's an msi gt70 0nc, so it's a higher end gaming laptop and I have tried everything and it just won't connect to any phone I plug into it.
And before anyone says if I've tried another laptop I have, to be specific I've plugged both phones into my lady's HP Envy with Windows 10 and both were recognized just fine.
If anyone is wondering here are the measures I've taken:
Installed LG United Mobile Driver (almost every version available)
Installed LG Mobile Driver (once again, every version available)
Installed LG PC Suite (Doesn't detect phone)
Tried switching phone between USB debugging and MTP PTP And Charge Only and every combination in between.
Have tried uninstalling and reinstalling Windows Media Player as it carries the MTP protocols.
Have tried installing the Media Feature Pack for windows 10 N and KN off of the Microsoft website
Have tried uninstalling the drivers manually and forcing an update on the drivers with no avail.
Have tried messing with the BIOS USB Settings on the laptop.
Disabled driver signature enforcement
Tried Safe Mode on both Laptop and Phones
Installed the Universal Google Driver
Installed ADB and fastboot (ADB doesn't detect the phone)
Installed KIES to try the Samsung (Doesn't detect phone)
Tried forcing generic MTP inf files
I'm honestly insanely frustrated and all I want is for this device to show up in my computer so I can install some roms and tinker. I've been trying all I could for the past 24 hours (Lost sleep) with no avail. Nothing seems to be wrong with the USB Ports as I have a Logitech unifying receiver plugged in for a mouse and it works, it just seems like this laptop doesn't like Android devices.
Going to device manager and forcing an update does nothing, the device sometimes shows up as "Unknown Device", sometimes shows up as "LGE Android Net MTP Device" and sometimes as "LGE Android Mtp Device", forcing the update yields the result "The driver installation file for this device is missing a necessary entry, This may be because the INF was written for Windows 95 or later. Contact your hardware vendor" This happens with both the LG and the Samsung. Any help would be appreciated. If anyone needs any more information or logs don't hesitate to ask.
Sure hope you find a solution and post it. I have EXACTLY the same issue. The last paragraph of your description is identical to the error message I am getting.
---------- Post added at 10:41 PM ---------- Previous post was at 09:52 PM ----------
Wow. All I did was uninstall and reinstall Media Player 11 and it started working. No driver error and computer detects phone now.
Hey guys i how are you doing?!!!
I have a htc desire d820n that was soft bricked and can boot only to fastboot when I tried to install a stock rom via sdcard it said that the zip file is to big and didnt install the rom then my phone was hard bricked and didn't turn on at all (not even to htc logo) and I downloaded 2 stock roms which were in a zip file and when i try to open them on my computer it says that the archive is corrupted (an unexpected end of archive) the good thing is that when i connect it to the pc it install a qualcomm driver (Qualcomm HS-USB QDLoader 9008 (COM5)) please help me.
thanks in advance.
George_Samy said:
Hey guys i how are you doing?!!!
I have a htc desire d820n that was soft bricked and can boot only to fastboot when I tried to install a stock rom via sdcard it said that the zip file is to big and didnt install the rom then my phone was hard bricked and didn't turn on at all (not even to htc logo) and I downloaded 2 stock roms which were in a zip file and when i try to open them on my computer it says that the archive is corrupted (an unexpected end of archive) the good thing is that when i connect it to the pc it install a qualcomm driver (Qualcomm HS-USB QDLoader 9008 (COM5)) please help me.
thanks in advance.
Click to expand...
Click to collapse
Carefully read it can help you with https://forum.xda-developers.com/de...n-restarts-continuously-t3548182#post71073715
My case is almost the same, but mine isn't detected for Windows (neither adb nor loader).
I had disconnected the battery, but without any results.
Any idea?
Clamp all 3 buttons and hold 1 minute. What happens?
vuk1963 said:
Clamp all 3 buttons and hold 1 minute. What happens?
Click to expand...
Click to collapse
n
Unfortunately, nothing
How did it all start? how did it all turn out? Read more.Are the drivers of the НTС installed?
---------- Post added at 07:11 PM ---------- Previous post was at 06:58 PM ----------
Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the task manager on the computer to choose the interface adb to install the driver, specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY
vuk1963 said:
How did it all start? how did it all turn out? Read more.Are the drivers of the НTС installed?
---------- Post added at 07:11 PM ---------- Previous post was at 06:58 PM ----------
All started when the phone isn't capable to install the official update to 6.0.
I decided to try other ROM's, opening the boot loader and installing the TWRP recovery. All goes well, but the ROM that are working better (Tomal - Discovery 2.00) had problems with my LTE networks.
Reading one of your post, I started to try to install the official 6.0, but I forgot to wipe the system before relock the bootloader.
After trying flash different RUU files through fastboot I used one from easy firmware: (0PFJIMG_A51_UL_K44_DESIRE_SENSE60_Orange_ES_1.28.75.5_Radio_01.01.010_U10305041_08.01.41222_2__combined_signed.zip) that belong to my CID (Orange Spain)
Then the phone don't respond to anything...
I will uninstall all drivers and programs and restart according your instructions...
Click to expand...
Click to collapse
vuk1963 said:
lcarrasc said:
Yes, sadly, you need to restore the bootloader,and it's very difficult to do it yourself http://4pda.ru/forum/index.php?showtopic=643084&st=7060
Click to expand...
Click to collapse
Thanks. I understand that my phone is lost
I tried to use QFIL (romkingz.net/2016/07/how-to-use-qualcomm-flash-image-loader) but the computer hasn't recognised the phone...
Click to expand...
Click to collapse
Solution: I will buy a used 820 with broken screen and then change the bricked motherboard myself. The price here is around 40 eur.
lcarrasc said:
Solution: I will buy a used 820 with broken screen and then change the bricked motherboard myself. The price here is around 40 eur.
Click to expand...
Click to collapse
Did you do this ?: 1.Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the Device Manager on the computer to choose the interface adb to install the driver specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY 3.Connect your phone to your computer,оn the computer in Device Manager, click the tab ports (СОМ and LPT).What is written there?
vuk1963 said:
Did you do this ?: 1.Android ADB driver https://yadi.sk/d/TVkbNcXv3KP7mQ Connect the phone to the computer in the Device Manager on the computer to choose the interface adb to install the driver specify in the manual on the desktop. 2.Also install USB_driver_QCOM https://yadi.sk/d/mrmvZKrk3MSggY 3.Connect your phone to your computer,оn the computer in Device Manager, click the tab ports (СОМ and LPT).What is written there?
Click to expand...
Click to collapse
Yes. I did it.
I'm running Windows 10. As you know this OS not showing Ports (COM and LTE) in Device Manager. I added manually a COM port, (COM3 in this case), but appears only the yellow signal (!) related to errors.
lcarrasc said:
Yes. I did it.
I'm running Windows 10. As you know this OS not showing Ports (COM and LTE) in Device Manager. I added manually a COM port, (COM3 in this case), but appears only the yellow signal (!) related to errors.
Click to expand...
Click to collapse
I also run Windows 10 х86 and in Device Manager has a ports (COM and LРТ)
What it's expected to find in the com ports?
lcarrasc said:
What it's expected to find in the com ports?
Click to expand...
Click to collapse
Something like: Qualcomm HS-USB QDLoader 9008 port com
The phone seems fully dead...
Only a red led blinking when the usb cable is connected to PC or a charger.
lcarrasc said:
The phone seems fully dead...
Only a red led blinking when the usb cable is connected to PC or a charger.
Click to expand...
Click to collapse
Clamp all 3 buttons and hold 1 minute,and try different variants combinations with holding the volume buttons + and - and the power button,with the connection of the phone to the computer and to the power unit
I tried all possible combinations of buttons, and nothing...
Any idea?
I have a LG G3 D855 I've been looking at for about a week now, it wont boot no matter what is flashed onto it. Tried as many guides as I could find but still nothing.
Anyone got any ideas?
Tried Flash tool with KDZ direct from LG, tried installing TWRP but it won't install, tried LG PC suit recovery and nothing. na-da.
jettonx said:
I have a LG G3 D855 I've been looking at for about a week now, it wont boot no matter what is flashed onto it. Tried as many guides as I could find but still nothing.
Anyone got any ideas?
Tried Flash tool with KDZ direct from LG, tried installing TWRP but it won't install, tried LG PC suit recovery and nothing. na-da.
Click to expand...
Click to collapse
Is it recognized in the device manager of your PC? If yes - what does it say?
*When I'm in download mode it shows up as "LGE Mobile USB composite device" under USB controllers.
startswithPendswithOOH said:
Is it recognized in the device manager of your PC? If yes - what does it say?
*When I'm in download mode it shows up as "LGE Mobile USB composite device" under USB controllers.
Click to expand...
Click to collapse
Yep that's exactly what this one shows up as.
I can boot into download and I can boot into stock recovery mode.
gyazo.com/1a09d74b4ae3a04d6587eb9096438ffc
jettonx said:
Yep that's exactly what this one shows up as.
I can boot into download and I can boot into stock recovery mode.
gyazo.com/1a09d74b4ae3a04d6587eb9096438ffc
Click to expand...
Click to collapse
Actually...it's not what it's showing up as. Under "Universal Serial Bus controllers" it should be listed, but yours is listed as LGE AndroidNet USB serial port(com 41) under "ports". That is looking like a soft brick. I had a similar problem occur when I unplugged a phone while it was flashing/upgrading. You'll need to TOT back to stock since KDZ has failed you. Scroll down to the TOT method... https://forum.xda-developers.com/showthread.php?t=2785089
I see you are on com41 - have you already tried TOT? If yes and it fails, what is the error?
*Also, you may need to uninstall any mobile device drivers and reinstall just the LG drivers for things to work right.
startswithPendswithOOH said:
Actually...it's not what it's showing up as. Under "Universal Serial Bus controllers" it should be listed, but yours is listed as LGE AndroidNet USB serial port(com 41) under "ports". That is looking like a soft brick. I had a similar problem occur when I unplugged a phone while it was flashing/upgrading. You'll need to TOT back to stock since KDZ has failed you. Scroll down to the TOT method... https://forum.xda-developers.com/showthread.php?t=2785089
I see you are on com41 - have you already tried TOT? If yes and it fails, what is the error?
*Also, you may need to uninstall any mobile device drivers and reinstall just the LG drivers for things to work right.
Click to expand...
Click to collapse
The TOT went on fine but it still won't boot, it's a strange one this phone..